How to retrieve a clip's in and out point?

I have cut a clip appart and now I need to know at which frame of the clip the new clip fragment starts.
Can someone please enlighten me on where to find this piece of information?

Strange, if I do this at my machine, nothing happens...
What action would this shortcut perform?
I have created another, small, (hypothetical) case here:
As you can see I have added the same video clip to the timeline twice:
So in the sequence both start at frame 00:00:00:00.
I trimmed both clips in the sequence. (BTW: What would the correct terminology for clips being added to the sequence be? Clips themselves can only reside in the Project window. Sequences may only contain links to those clips... So, just to be able to distinguish both, I'll call these links in a sequence 'clip links' here.) ...Thus, what I actually did was to trim both clip links in the sequence.
As you can see from the thumbnails in the image, I trimmed each of the clip links at different clip positions.
Although both clip links are of same length, I trimmed the clip link in track Video 1 to start at 00:00:00:00 while the clip link in track Video 2 has been trimmed to start at 00:00:15:07.
Correspondingly, the clip link in track Video 1 ends at clip frame 00:00:03:05 while the clip link in track Video 2 ends at clip frame 00:00:18:13.
These are the values I want to retrieve. After trimming I need to know exactly what is the first frame of a clip link that's being displayed.
So I need to acquire the 00:00:00:00 - 00:00:03:05 for that clip link in track Video 1 and the 00:00:15:07 - 00:00:18:13 for the clip link in track Video 2.

Similar Messages

Clips shift in and out points after render (Dissolves messed up too) Urgent

Hello all, I have a frustrating and urgent problem.
I'm working with DV NTSC footage at 23.98 fps, shot 24pA and captured with the advanced pulldown removal from a dvx100.
The problem arises when I am rendering my footage from a color correction, etc, the in and out points of my shots change and the shot seems to shift. The cut points don't change, but the shot shifts position within them, almost as if rendering has caused final cut to use the slip tool on these and move them ever so slightly forward or backward.
This problem is also effecting my dissolves, causing them to start to dissolve then suddenly jerk into another part of the clip and then back to the shot that it is transitioning to.
I have tried outputting a QT movie of my timeline (in order to color correct that instead and avoid a render), but as you may have guessed, this only results in a QT movie with all of the above problems.
It is very similar, if not the same, as the problem described here: http://discussions.apple.com/thread.jspa?messageID=8096178&#8096178
I'm under a deadline and any help would be very much appreciated.
Thanks all,
Nathan

I've had that happen before. Crazy as it sounds, I "solved" it by laying a large video file over the top of the timeline (covering everything) then brought the opacity down to 0%. Go figure but it worked; everything straightened out and rendered fine.
Ghost in the machine for sure.

Is there any way to lock your in and out points on a clip?

Everytime I click outside the clip, my in and out points disappear and I have to reset them. Any ideas?

No way of locking them in, but once you have your in and outs set, if you hit F it will favorite that area. Then whenever you want to go back to that clip just click the favorite icon on the clip and your in and outs will be set around the favorite section.

Filters change in and out points?

This is the first time this has happened.
When I add certain 3rd party filters and/or composite a layer above my clip, the in and out points appear to change in the clip (i.e. a different portion of the clip is now in the time line.
When I double click the clip, the incorrect portion of the clip is loaded into the Viewer window, but when I do a Match Frame, the correct portion of the clip is loaded in the Viewer window.
Also, when the incorrect portion of the clip is loaded in the Viewer (like when I double click it to load), the current timecode display (upper right) is italicized. It is actuallly the correct timecode, but the video is incorrect and the timecode is italicized.
I did a Save As..., created a new sequence and cut and pasted the contents of the problem sequence, and set up a new project and cut and pasted the sequence in there to see if there was corruption, but I had the same problem there. i also trashed FCP preferences.
I have a Mac Pro dual Quad 3Ghz running OS X.5.4
I searched everywhere for "filters changing in and out points" and "Italicized timecode" and everything else I can think of, and found nothing. Anyone have any ideas?
Thanks!

Have you tried trashing render files with Render Manager and re-rendering?
rh

Exporting In and Out Points

I have my video all in my timeline, and want to put it up online, but have to do at 20 minute intervals. I did the first twenty minutes fine, but was wondering how to you export just the in and out points?
I put an in point at about 20 minutes in, and put it out point at about 40 minutes, and after exporting, it exported the whole file. How do I export it so its just what I set the I and O at?
Thanks!

Make sure that the Timeline is the active window before you export and you will get just "in to out".

How to retrieve multiple data from table and represent it in jsp page

Hi
The below JavaScript code is used to add row in the table when I want to add multiple row data into table for single entry no field.
<html> function addRow()
            i++;
            var newRow = document.all("tblGrid").insertRow();
            var oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='srno"+i+"' type='text' id='srno"+i+"' size=10>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='itmcd"+i+"' type='text' id='itmcd"+i+"' size='10'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='itmnm"+i+"' type='text' id='itmnm"+i+"' size='15'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='indentqty"+i+"' type='text' id='indentqty"+i+"' size='10'>";
            oCell = newRow.insertCell();
                oCell.innerHTML = "<input name='uom"+i+"' type='text' id='uom"+i+"' size='10'><input type='hidden' name='mcode"+i+"'id='mcode"+i+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='packqty"+i+"' type='text' id='packqty"+i+"' size='10'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='packuom"+i+"' type='text' id='packuom"+i+"' size='10'><input type='hidden' name='pack"+i+"' id='pack"+i+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='rate"+i+"' type='text' id='rate"+i+"' size='10'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='dor"+i+"' type='text' id='dor"+i+"' size='0' onClick='"+putdate(this.name)+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='bccode"+i+"' type='text' id='bccode"+i+"' size='10'></td><input type='hidden' name='bcc"+i+"' id='bcc"+i+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='cccode"+i+"' type='text' id='cccode"+i+"' size='10'></td><input type='hidden' name='ccc"+i+"' id='ccc"+i+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='remark2"+i+"' type='text' id='remark2"+i+"' size='20'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input type='button' value='Delete' onclick='removeRow(this);' />";
           // oCell = newRow.insertCell();
           // oCell.innerHTML = "<input type='button' value='Clear' onclick='clearRow(this);' />";
        }<html> Then this data are send to the next Servlet for adding into two table.
My header portion data are added into one table which added only one row in table. while footer section data are added into the no of rows in another table dependent on No. of
Rows added into jsp page.
Here is an code for that logic.
<html>
ArrayList<String> mucode = new ArrayList<String>();
                            ArrayList<Integer> serials = new ArrayList<Integer>();
                            ArrayList<Integer> apxrate = new ArrayList<Integer>();
                            ArrayList<Integer> srname = new ArrayList<Integer>();
                            ArrayList<String> itcode = new ArrayList<String>();
                            ArrayList<String> itname = new ArrayList<String>();
                            ArrayList<Integer> iqnty = new ArrayList<Integer>();
                            ArrayList<String> iuom = new ArrayList<String>();
                            ArrayList<Integer> pqnty = new ArrayList<Integer>();
                            ArrayList<String> puom1 = new ArrayList<String>();
                           ArrayList<Integer> arate = new ArrayList<Integer>();
                            ArrayList<String> rdate = new ArrayList<String>();
                            ArrayList<String> bcs = new ArrayList<String>();
                            ArrayList<String> ccs = new ArrayList<String>();
                            ArrayList<String> remarkss = new ArrayList<String>();
                            //ArrayList<Integer> qtyrecs = new ArrayList<Integer>();
                            //ArrayList<String> dors = new ArrayList<String>();
                            //ArrayList<String> remarks = new ArrayList<String>();
                 String entryn = request.getParameter("entryno");
                    String rows = request.getParameter("rows");
                    out.println(rows);
                    //String Entryno = request.getParameter("entryno");
                   // out.println(Entryno);
                  int entryno = 0,reqqty = 0,srno = 0,deprequest = 0,rowcount = 0;
                            if(!Entryno.equals("")){
                                    entryno = Integer.valueOf(Entryno);
                            if(!rows.equals("")){
                                    rowcount = Integer.valueOf(rows);
                           for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("srno"+i)!=null){
                                            serials.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
                                            out.println(serials.size());
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("srno"+i)!=null){
                                            srname.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
                            out.println(srname.get(0));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("itmcd"+i)!=null){
                                            itcode.add(request.getParameter("itmcd"+i).trim());
                                    } //out.println(itcode.get(i));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("itmnm"+i)!=null){
                                            itname.add(request.getParameter("itmnm"+i).trim());
                                    }//out.println(itname.get(i));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("indentqty"+i)!=null){
                                            iqnty.add(Integer.valueOf(request.getParameter("indentqty"+i).trim()));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("uom"+i)!=null){
                                            iuom.add(request.getParameter("uom"+i).trim());
                                    }//out.println(iuom.get(i));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("mcode"+i)!=null){
                                            mucode.add(request.getParameter("mcode"+i).trim());
                           for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("packqty"+i).equals("")){
                                      pqnty.add(0);
                                    }else
                                        pqnty.add(Integer.valueOf(request.getParameter("packqty"+i).trim()));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("pack"+i)!=null){
                                            puom1.add(request.getParameter("pack"+i).trim());
                                   }else
                                    puom1.add("");
                           for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("rate"+i).equals("")){
                                        arate.add(0);
                                    }else
                                    arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
                 /* for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("rate"+i)!=null){
                                            arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
                          for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("dor"+i)!=null){
                                            try{
                                                    rdate.add(dashdate.format(slashdate.parse(request.getParameter("dor"+i).trim())));
                                            }catch(ParseException p){p.printStackTrace();}
                                    }else
                                       { rdate.add("");}
                               for(int i=1;i<=rowcount;i++){
                             if(request.getParameter("bcc"+i)!=null){
                                            bcs.add(request.getParameter("bcc"+i).trim());
                                    }out.println(bcs.get(0));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("ccc"+i)!=null){
                                            ccs.add(request.getParameter("ccc"+i).trim());
                                    }out.println(ccs.get(0));
                            for(int i=1;i<=rowcount;i++){
                                out.println("remark2");
                                    if(request.getParameter("remark2"+i)!=null){
                                            remarkss.add(request.getParameter("remark2"+i).trim());
                                    }out.println(remarkss.get(0));
                    ArrayList<String> Idate = new ArrayList<String>();
                    for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("dateindent"+i)!=null){
                                            try{
                                                    Idate.add(dashdate.format(dashdate.parse(request.getParameter("dateindent"+i).trim())));
                                            }catch(ParseException p){p.printStackTrace();}
                String Rdate = dashdate.format(new java.util.Date());
                 String tdate = dashdate.format(new java.util.Date());
                 // String Indentdate = dashdate.format(new java.util.Date());
               // String ApprovedT1 = dashdate.format(new java.util.Date());
               // String ApprovedT2 = dashdate.format(new java.util.Date());
                   // String ApprovedT1=" ";
                    //String ApprovedT2="";*/
                String ApprovedT1= dashdate.format(new java.util.Date());
               out.println (ApprovedT1);
                  String ApprovedT2=dashdate.format(new java.util.Date());
                   out.println(ApprovedT2);
                String Indentdate=(dashdate.format(slashdate.parse(request.getParameter("dateindent").trim())));
                   out.println(Indentdate);
                    String Cocode ="BML001";
                    out.println(Cocode);
                    String Deptcode = request.getParameter("dept1");
                    out.println(Deptcode);
                    String Empcode = request.getParameter("emp");
                    out.println(Empcode);
                    String Refno =request.getParameter("rtype");
                     out.println(Refno);
                    String Divcode = request.getParameter("todiv1");
                    out.println(Divcode);
                    String Usercode = "CIRIUS";
                     String Whcode = request.getParameter("stor");
                    out.println(Whcode);
                    // String Itemgroupcode = request.getParameter("");
                     String Itemgroupcode ="120000";
                     out.println(Itemgroupcode);
                    String Supplytypecode = request.getParameter("stype");
                    out.println(Supplytypecode);
                    String Delcode = request.getParameter("deliverycode");
                    out.println(Delcode);
                    String Itemclass="WS";
                    out.println(Itemclass);
                    // String Itemclass = request.getParameter("iclass");
                   // out.println(Itemclass);
                    String unitcode = request.getParameter("uni");
                    out.println(unitcode);
                     String Todivcode = request.getParameter("todiv1");
                    out.println(Todivcode);
                    String Appxrate = request.getParameter("rate");
                    out.println(Appxrate);
                    String Srno = request.getParameter("srno");
                    out.println(Srno);
                /*    String Indqty = request.getParameter("indentqty");
                  out.println(Indqty);*/
              String Itemcode = request.getParameter("itmcd");
                   out.println(Itemcode);
                   String Othersp = request.getParameter("remark1");
                    out.println(Othersp);
                    String Reqdt = request.getParameter("dor");
                    out.println(Reqdt);
                    String Munitcode = request.getParameter("mcode");
                    out.println(Munitcode);
                    String Packqty = request.getParameter("packqty");
                    out.println(Packqty);
                    String Packuom = request.getParameter("pack");
                    out.println(Packuom);
                    String Remark2 = request.getParameter("remark2");
                    out.println(Remark2);
                    String BC = request.getParameter("bcc");
                    out.println(BC);
                    String CC = request.getParameter("ccc");
                    out.println(CC);
                    try{
                        st=connection.createStatement();
                        connection.setAutoCommit(false);
                        String sql="INSERT INTO PTXNINDHDR(COCODE,DEPTCODE,EMPCODE,APPROVEDT1,APPROVEDT2,INDDT,ENTRYNO,REFNO,REMARKS,DIVCODE,USERCODE,WHCODE,ITEMGROUPCODE,SUPTYPECODE,DELCODE,UNITCODE,TODIVCODE,ITEMCLASS)VALUES('"+Cocode+"','"+Deptcode+"','"+Empcode+"','"+ApprovedT1+"','"+ApprovedT2+"','"+Indentdate+"',"+Entryno+",'"+Refno+"','"+Othersp+"','"+Divcode+"','"+Usercode+"','"+Whcode+"','"+Itemgroupcode+"','"+Supplytypecode+"','"+Delcode+"','"+unitcode+"','"+Todivcode+"','"+Itemclass+"')";
                        out.println(sql);
                        st.addBatch(sql);
                        for(int i=0;i<serials.size();i++){
                            out.println("Inside the Statement");
                            String query3="test query for u";
                            out.println(query3);
                           String queryx="Insert into PTXNINDDTL(APXRATE,ENTRYNO,BRKNO,INDQTY,ITEMCODE,OTHERSPFCS,MUNITCODE,PACKQTY,PACKUOM,REMARKS,DIMSUBGRPCODE,DIMCODE,REQDT)VALUES("+arate.get(i)+","+entryno+","+srname.get(i)+","+iqnty.get(i)+","+itcode.get(i)+",'"+Othersp+"','"+mucode.get(i)+"',"+pqnty.get(i)+",'"+puom1.get(i)+"','"+remarkss.get(i)+"','"+bcs.get(i)+"','"+ccs.get(i)+"','"+rdate.get(i)+"')";
                           out.println(queryx);
                            st.addBatch(queryx);
                       int[] result=st.executeBatch();
                       connection.commit();
                       for(int k=0;k<result.length;k++)
                       out.println("rows updated by "+(k+1)+"insert sta:"+result[k]+"");
                    catch(BatchUpdateException bue)
                    out.println("error1;"+bue+"");
                    catch(SQLException sql)
                    out.println("error2;"+sql+"");
                    catch(Exception l)
                    out.println("error3;"+l+"");
</html>
   Now I looking for to retrieve this footer section data available in multiple rows from footer table and present it in jsp page .
I am finding difficulties in how to show this multiple row data for dynamic no of rows .i.e. variable no. of rows.
I have able to show the data in Header portions of page in this ways
here i am adding the part of code which shows the data from header part of table i.e from Header table
<html>
<h2 align="center"><b>Indent Preparation</b></h2>
    <div align="left">
        <table width="849" border="0" cellspacing="3" cellpadding="3" align="center">
            <tr>
                <td ><div align="left"><b>Indent No.</b></div></td>
                <td ><label>
                        <input name="indentno" type="text" id="indentno" size="15" value="" /><input type="hidden" name="no" id="no">
                </label></td>
                <td ><div align="center"><strong>Indent Date</strong></div></td>
                <td ><label>
                        <div align="center">
                            <input name="dateindent" type="text" id="dateindent"value="<%=date1%>"/><input type="hidden" name="no" id="no">
                        </div>
                </label></td>
                <td> </td>
                <td><div align="right"><strong>Entry No.</strong></div></td>
                 <%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
        <td><input type="text" value="<%=hdrcode.get(3)%>" size="10"></td>
<%}else{%>
               <td><input type="text" name="entryno" id="entryno" value="<%=entryNo%>"/></td>
                         <%}%>
                        <div align="right"></div>
            </tr>
            <tr>
                <td><b>Division</b></td>
                <%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(9)%>" size="20"</td>
<td><input type="hidden" name="div1" id="div1" value='<%=hdrcode.get(10)%>'></td>
<%}else{%>
               <td><input type="text" name="div" id="div" /></td>
               <td><input type="hidden" name="div1" id="div1" /> </td>
          <%}%>
                <td> </td>
                <td> </td>
                <td><div align="right"><strong>Unit</strong></div></td>
               <%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(14)%>" size="20"</td>
<td><input type="hidden" name="uni" id="uni" value='<%=hdrcode.get(12)%>'></td>
<%}else{%>
               <td><input type="text" name="unit" id="unit" /></td>
               <td><input type="hidden" name="uni" id="uni" /> </td>
          <%}%>
            </tr>
            <tr>
</html>
Any suggestion on any above works is highly appreciated.
Thanks and regards
harshal

Too much code. It's also not well intented nor formatted. I don't see a question either or it got lost in that heap of unformatted code.
I will only answer the question in the thread's subject:
How to retrieve multiple data from table and represent it in jsp pageTo retrieve, make use of HttpServletRequest#getParameterValues() and/or #getParameter().
To display, make use of JSTL's c:forEach.

How to retrieve WorkflowContext without passing username and password ?

Hi,
I have created a dynamic ApprovalGroup and inside this class i have the following private method.
private IWorkflowContext fetchWorkflowContext() {
          IWorkflowServiceClient wfSvcClient =
               WorkflowServiceClientFactory.getWorkflowServiceClient(WorkflowServiceClientFactory.LOCAL_CLIENT);
          ITaskQueryService queryService = wfSvcClient.getTaskQueryService();
          IWorkflowContext workflowContext;
          try {
               workflowContext =queryService.authenticate("weblogic", "weblogic1".toCharArray(), null);
               } catch (WorkflowException e) {
               e.printStackTrace();
But when i retrieve workflowContext, I have to pass username and password.As this dynamic ApprovalGroup class will be deployed on the same SOA server under D:\Oracle\Middleware111150\Oracle_SOA1\soa\modules\oracle.soa.ext_11.1.1
I have kept wf_client_config.xml under D:\Oracle\Middleware111150\Oracle_SOA1\soa\modules\oracle.soa.ext_11.1.1\classes.
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<workflowServicesClientConfiguration
xmlns="http://xmlns.oracle.com/bpel/services/client">
     <server name="default" default="true" excludeFromFederatedList="true">
     <localClient>
          <participateInClientTransaction>false</participateInClientTransaction>
     </localClient>
     <remoteClient>
          <serverURL>t3://localhost:8001</serverURL>
          <userName>weblogic</userName>
<password>weblogic1</password>
          <initialContextFactory>weblogic.jndi.WLInitialContextFactory</initialContextFactory>
          <participateInClientTransaction>false</participateInClientTransaction>
     </remoteClient>
     <soapClient>
          <rootEndPointURL>t3://localhost:8001</rootEndPointURL>
          <identityPropagation mode="dynamic" type="saml">
               <policy-references>
               <policy-reference enabled="true" category="security" uri="oracle/wss10_saml_token_client_policy"/>
               </policy-references>
          </identityPropagation>
     </soapClient>
     </server>
</workflowServicesClientConfiguration>
How to retrieve WorkflowContext without passing username and password ?
============================
workflowContext =queryService.authenticate("weblogic", "weblogic1".toCharArray(), null);
============================
regards.
Edited by: user10303338 on Oct 5, 2011 1:51 AM

Use :
Properties prop = System.getProperties();
prop.put("proxySet","true");
prop.put("http.proxyHost","yourProxy");
prop.put("http.proxyPort","8080"); // change the port
//prop.put("https.proxyHost","yourProxy");
//prop.put("https.proxyPort","8080"); // change the port
Denis

Batch convert clips cut with razor instead of in and out points. How?

I cut a lot of clips on a big file with the razor instead of marking in and out points and now I want to batch convert. How?
Adobe CS5.5

Hi AK,
AngusKirk wrote:
I cut a lot of clips on a big file with the razor instead of marking in and out points and now I want to batch convert. How?
Adobe CS5.5
You can do that in Premiere Pro CC, but not before. Drag the clips from the Timeline to a bin and then export.
Thanks,
Kevin

How to retrieve data from catsdb table and convert into xml using BAPI

How to retrieve data from catsdb table and convert into xml using BAPI
Points will be rewarded,
Thank you,
Regards,
Jagrut BharatKumar Shukla

Hi,
This is not your requirment but u can try this :
CREATE OR REPLACE DIRECTORY text_file AS 'D:\TEXT_FILE\';
GRANT READ ON DIRECTORY text_file TO fah;
GRANT WRITE ON DIRECTORY text_file TO fah;
DROP TABLE load_a;
CREATE TABLE load_a
(a1 varchar2(20),
a2 varchar2(200))
ORGANIZATION EXTERNAL
(TYPE ORACLE_LOADER
DEFAULT DIRECTORY text_file
ACCESS PARAMETERS
(FIELDS TERMINATED BY ','
LOCATION ('data.txt')
select * from load_a;
CREATE TABLE A AS select * from load_a;
SELECT * FROM A
Regards
Faheem Latif

FCP7 HELP - Exported quicktime mov plays differently than what I edited on the timeline. The playback shows the clips with ins and outs that are different than what I set in the clips when I edited - some are too early and the clips don't playback

Please help ASAP.
Specs: IOS 10.6.8
Processor 2.4GHz Intel Core i5
Memory 4GB 1333 MHz DDR3 -- Everything is edited, sourced, and stored on an 2TB external hard drive to make things go faster.
Editing with FCP 7
When I export the sequence I edited with quicktime, the playback video is very different from what I edited on the timeline. The playback has the clips with ins and outs that are way off than what I cut, and some of the clips don't show at all or have changed transitions. However when I play in the timeline in FCP, the sequence is fine, just the way I cut it.
The source of the clips was one long .mov that I cut into clips for the timeline. Everything has gone smoothly but the exported .mov is just so different.
How can I get the time codes of the clips to be the same in the exported .movs? I just want the quicktime .mov to represent my edit exactly.
This video is due tomorrow - if the solution is too time consuming, can I play within the FCP player window and Log and Capture?
Thanks,
MV

What is your source material? Is it H.264? FCP does not work correctly with that material.
Click on a source clip in the FCP Browser, and once selected, type Command + 9 to see the item properties for the clip. Either report those properties, or take a screen shot of the item properties, and post that here.
Next, click anywhere in your timeline, and then type Command + 0 {zero} to see your Sequence Settings. Either report those Sequence Settings, or take a screen shot of the Sequence Settings and post that here.
MtD

New problem/bug when I set in and out points on a clip. Unwanted automatic zoom in on clip timeline.

Playing clips to log and set in and out points for scenes I will use later. Something changed with the new update and I think it is a bug. When I hit the I and O keys to set in and out points on a clip before dragging to the sequence, it zooms in on the clip timeline. I cannot see the full clip time line unless I zoom out which is a pain to do time and time again. How do I get it back to the way it was before? It did not used to zoom in and out, it just marked your in and out point as it played leaving the clip timeline unchanged.
I am using windows 7 with Premiere Pro CC

Hi,
Thanks for your post. I think you are using Premiere pro CS6 as the Project option is included in the file menu and in the video there is an option of project available and visible. Please update your CS6 with the latest 6.0.5 update and the issue will be fixed. The link is provided below. Please update once issue is fixed.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5631
Regards,
Vinay

How do I globally set in and out points on a large number of images?

As the post asks: How do I globally set in and out points on a large number of images before sending to the timeline? In AVID I can do this in the Script view. How do I do it in FCP?
Thanks in advance

Thanks. I assumed I needed to set in and out points. I have not done an image sequence in FCP. If I have a 10 second image and a 2 second transition, but then change the duration of the transition to say 4 seconds then FCP will let me alter the transition duration?
With regards to movie clips, what happens with setting global in and out points? How would I do that?
Thanks in advance

Can clips retain last playhead position and in and out points like v7?

Is there a setting that will enable the clips to retain the last playhead position and in and out points so that I don't have to find the place I left off at every time I go to that Clip? Basically how FCP 7 worked.
Vince

This is another area that's lacking in this great application, I'm afraid - but there are ways to keep the 'in and out' points at least.
When you have marked them you simply press 'F' to mark your selection as a favourite. Then if you click the green bar that appears, your selection will immediately be highlighted.
Alternatively, add keywords to your selection - then when you click the keyword collection in the event browser, the clips will be displayed, already trimmed.
A third way is to trim away the unwnated footage in your clip. Lets say you have a long clip and you want to make multiple clips from it. You don't want the first three seconds of the clip and you also don't want the last one second . . . (follow this carefully - it works)!
Move the playhead to your IN point and press the 'O' key (yes the 'O' key).
Now press the backspace key and your clip is trimmed to the 'in' point. Now scroll to the out point and press the 'I' key (that's right). Move the playhead to the 'in' point of your next clip and press 'O'.
Press Backspace and your clip stands on its own for all time.
(You can even mark one frame 'Out' and the very next frame 'In' and this will work - you don't lose any frames).
Sorry I can't help you with retaining the playhead position.
Andy

How can I get my system in and out of DOS mode?

How do I get my system in and out of DOS mode?

There is no "Dos-Mode" in OSX.
Guessing that you tried to run an .exe file while in OSX ?
These are meant to be run in Windows.
Stefan

Color is changing the clips in and out points

I tried to import into color a fcp7 sequence. The original footage are quicktime clips.
When the project opens in color, the in and out points of the clips are not there and it gives me the beginning of the clip.
With other footage that I ingested in FCP I don't have a problem.
Can someone explain this to me.
Thanks

>The original footage are quicktime clips.
What FORMAT of Quicktime? Because QT is just a container that can be one of a dozen codecs. Color ony works with certain codecs, like ProRes, HDV, XDCAM, DVCPRO HD. If the codec is anything but those...it will have serious problems.

How to retrieve a clip's in and out point?

Similar Messages

Maybe you are looking for