How to retrieve configuration scenarios in Integration Directory?

Hi All,
I am developing a Java program to read all configuration scenarios in Integration Directory. My plan is to find SAP's Java APIs available in the NetWeaver Java stack to read the info I need. I have done lots of searches for such the APIs but still got no luck. Could you help me out?
I'm on NetWeaver PI 7.1.
Thanks,
Viet
Edited by: Viet Phan on May 13, 2011 1:11 PM

Hi,
The 3rd party adapters must be installed via Deploy Tool or JSPM. But u should have a sda file with the adpater content.
see here for more details on JSPM
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5006901f-925c-2910-5f98-9ae26cc07eca
Usually all these third-party developed adapters also developed pre-defined business content with mappings, but this does not mean that all the interfaces you have can use it. If you do not have any custom work, then you can automate it, but if there is custom work then you have to enhance or develop new maps.
For example, Seeburger has over 20 maps to convert EDI X12 to standard IDoc maps and vice-versa (INVOIC Idoc to 4010 etc).
http://service.sap.com/netweaver ->SAP NetWeaver in Detail -> Process Integration -> SAP Exchange Infrastructure ->SAP XI in Detail -> Connectivity.
Please reward points if it helps.
Thanks
Vikranth

Similar Messages

Create scenario in Integration Directory eroor:java.lang.NullPointerExcept

Dear all,
I have create all thing under software component SAP BW 7: message interfarence and import object rfc, also create integration senario.
now while i am going to create scenario from Integration Directory > select internal communication and enter create getting error:
java.lang.NullPointerException
Internal problem occurred (INTERNAL_PROBLEM)
i have transferd Integaration scenario from IR and than try to do same, got same error,
whats the initial steps for importing Integration Repository design in to Integration Directory?
Best regards,
dushyant.

Hi Dushyant,
Actually it should work...
try first this one
In ID -->First import the Integration Scenario by clicking tolls -->Transfer IS from IR
Then
Click Create Object in ID then you will get the scrren 3 0f 4.5 as per the link...
Then click create ---> and enter the service name (if does not exist it is automatically created)
Then select remaining as required...
Or else...
follow this...
Just Double click the Configuration Scenario under Configuration Objects and Proceed ( No need of Configuration Wizard required) and select your Integration scenario created in IR...
and rest you can create all the remaining steps under the Scenario that you created by following the smae steps...
Regards,
sridhar

How to add buisness system in Integration directory -objects

Hi All,
I created the technical systems and buisness systems. then in the integration directory, i want to check whether my business system exixts are not.
so in the integration directory,
objects--->service without party >buisness system>
in the buisness system , whatever buisness system i created the is not found.
how to add buisness system into integration directory -- objects.
Regards,
vinoth.

Hi,
go to integration directory,
objects--->service without party >buisness system>
select the BS -> Right click the BS -> it show the number of BS select your business system and assign them next save.
If the your business system if it's not appear go to Environment menu -> Clear SLD Data cahce.
and do the same process again..
Regards,
Venu.

How to import Adapter's in Integration directory

Hi,
How to import Adapter's in Integration Directory which we can use in communication channel.
Thanks
Hari

Hi,
The 3rd party adapters must be installed via Deploy Tool or JSPM. But u should have a sda file with the adpater content.
see here for more details on JSPM
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5006901f-925c-2910-5f98-9ae26cc07eca
Usually all these third-party developed adapters also developed pre-defined business content with mappings, but this does not mean that all the interfaces you have can use it. If you do not have any custom work, then you can automate it, but if there is custom work then you have to enhance or develop new maps.
For example, Seeburger has over 20 maps to convert EDI X12 to standard IDoc maps and vice-versa (INVOIC Idoc to 4010 etc).
http://service.sap.com/netweaver ->SAP NetWeaver in Detail -> Process Integration -> SAP Exchange Infrastructure ->SAP XI in Detail -> Connectivity.
Please reward points if it helps.
Thanks
Vikranth

How to delete unwanted namespaces in Integration Directory

Hi All,
I have made some testing while creating namespaces in Integration Directory. Now I want to delete the unwanted namespaces. Please help me in doing so.
Regards,
Soorya

HI,
If u want delete unwanted namespaces in IR and ID.Please following these steps.
In IR:
1) First u have to select Softwarecomponent.
2)Select u r Unwanted namespace.
3)Delete developed object onebyone.
4)Remove the namespace from Namespace list Press button.
5)Then activate the deleted objects from change List.
IN ID.
1)Select the integration scenario and right click on it..under popup menu select delete.Then auotmatically delete the objects.After u activate all the deleted objects from change list.
Once u complted these steps unwanted objects have been deleted.
Thanks
Ravi

How to block changes only in integration directory

Hi,
I explain the situation I´m experimenting right now:
After importing a tpz file, a developper needs to make some changes for example in the repository but he told the last time that he also modified data in a communication channel in the ID and I´d like to prevent this kind of actions right now...
What kind of roles could I use to stop this user modifying anything in Integration Directory and allow him at the same time making changes in the Integration repository?
Another thing:
Is there a kind of registration log in the Integration Directory in order to consult with details committed actions in the past?
Thank you in advance,
regards,
Olivier

Hi,
>>>What kind of roles could I use to stop this user modifying anything in Integration Directory and allow him at the same time making changes in the Integration repository?
you need to create correct role as per my blog (for directory only in your case)
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects
>>Another thing:
Is there a kind of registration log in the Integration Directory in order to consult with details committed actions in the past?
for every objects in ID or IR you can select from objects menu history to check the changes
Regards,
Michal Krawczyk

How to do Conflict Resolution in Integration Directory - Urgent

Hi,
We are having a problem when trying to change some objects in the integration directory.
Error :
"The following objects have previous versions that are no longer active.
Reciever Determination urn:sap-com:document:sap:idoc:messages | HRMD_A.HRMD_A07 .
Open these objects in the editor and perform a conflict resolution."
Could someone please respond with some solution of how to resolve this ??
Thanks
Sourav

2 Different Id's , same question in 10 minutes withing each other ?
The following objects have previous versions that are no longer active

How to retrieve configuration list for WebDynpro component

Hi experts,
I have webdynpro component A with configuration AA.
How to retrieve configurtion AA ? Is there any interface or Function module I can use?
Also another question is how to get webdynpro configuration of WebDynpro application.
Thanks.
best regards,
Vincent

Hi Abhi,
Yes , this is possible.
But I want to get configuration dynamically.
Input parameter : WebDynpro compoenent name
Output Parameter: List of WebDynpro Configuration
Is this possible?
Vincent

Error while importing the Integration Directory Objects

Hi,
I created one simple RFC to RFC scenario.We have only one XI system. after creation of this scenario I exported the Scenario from Integration Directory. Then I deleted the configuration scenario from Integration directory. Now I tried to import the TPZ file which was generated before the deletion of the objects in the integration directory. I get following error :
"No business system found on the application server (XXXXXXX, 00) for client 001"
XXXXXXX is our XI server.
Now if I create the Business system for client 001 in SLD for XI system and tried to import the TPZ file again, it works.
What could be the reason for this? Also Please let me know if I have to do any configuration before importing the TPZ file in same the same system to avoid the above error.
Highly Appreciate your valuable inputs.
Thanks,
Chandravadan

Hi Swarup,
Thanks for reply.
As you suggested, I did the SLD cache refresh and also whole cache refresh. But Still I get the above error. and if I create the business system for 001 client of XI system then it works.
My doubt is why I get error only for 001 client. There are also clients in XI system. and I have business system for client 600 of XI system as Integration server.
Thanks,
Chandravadan

Configuration scenario currently being edited by user" & locked

HI all,
Appreciate your help on this object locks;
I was changing some configuration scenarios in integration Directory - suddanly lost the internet connection;
Now when i try to change it says "configuration scenario currently being edited by user" & locked
I appreciate if you help me to remove these lock objects
Thanks
Iver

Hi,
Go to administration -
Select appropriate option out of these - > repository/ Directory
now select LOCK OVERVIEW.
now you will get all the locked objects by any user.
Now focus on locked object which you want to realese
now press Button Release Lock .
Hurray !!! locks are released.
Hope this helps .....
regards
prabhat Sharma.

Integration Directory - how to terminate all logons?

I was importing RFC definitions from R/3 in ID. Laptop battery went down and got disconnected with SAP XI,IB.
After 5 mins, restarted laptop (powered by wire). Opened same SWCV in Integration Directory to change the connection data to point R3 system instead of XI SAP. It gives message "Object SWCV myswcv is currently being edited by user myIDuserid"
This is what I did sofar, but no luck
-logon to XI system, transaction SM04. Terrminate all connections with SAP XI.
Please advise how to terminate all logons in Integration directory? Thanks

Hi,
You can go to 'index page' click on 'administration'. In that you will find on the left side 'administration of locks and caches'. You can click 'lock overview' and unlock the objects.
Regards,
P.Venkat
Message was edited by:
Venkataramanan

How to configure SOA in Integrated WLS Server for JDEV 11.1.1.1.0

Hi,
I am trying to deploy a SOA Application but it says No SOA Configured targets found. How can I configure SOA on Integrated Weblogic Server in JDeveloper.
Thanks

Okay, so the Admin server controls the connection. Is there a screen that shows this? My JDev is reporting that the soa server does not exist, though the WebLogic administrator shows that it's there.
I have checked the AdminServer.log and the soa_server1.log files and found nothing that would indicate an error. I also noticed there is something called a Work Manager. wm/SOAWorkManager This guy is pointing to just the soa server.

Configuration Scenario Builder - Receiver Determination Problem.

Hi I am Follows configurates Integration Scenario to SRM-SUS scenario in XI
In Model Configuration. when I try create Object Bottom in Simulation Process . generate the report show the next message for
Component View Connection
Receiver Determination light yellow color SRD_009 | PurchaseOrderRequest_out
Analisys ; Requiered Communication Component | SRD_009
                a receiver determination was found for connection
                Reciever are missing in the receiver determination found
Results ; the reuse receiver determination is already assigned to the configuration scenario
               the missing receivers were inserted into receiver determination found
               added receiver communication component SRD_008
Notes;      Check the conditions for all receivers of the receiver determination. the default result value for the generated condition
                is TRUE:
thanks.

Hi,
Please verify letter by letter if you haven't make a typo here:
Default Interface Namespace -- http://mtf
Default Interface Name -- mtf_mi1
please also make a test of your scenario in integration directory
please also do not use best efort quality of service
/wg
Message was edited by:
        Wojciech Gasiorowski

Integration directory problem while creating business service

HI,
CURRENTLY I AM FACING A PROBLEM IN INTEGRATION DIRECTORY. WHEN I TRY TO CREATE A BUSINESS SERVICE INSIDE THE SERVICE WITHOUT PARTY WHICH I AM TAKING AS A SENDER, I AM UNABLE TO GET THE SOFTWARE COMPONENT VERSIONS IN THE SENDER PARAMETERS.
IF ANYONE CAN GIVE THE COMPLETE CONFIGURATION STEPS FOR SENDER AND RECIEVER SYSTEM THAT WILL BE VERY HELPFUL.
BEST REGARDS,
MONA

Hi Mona,
Let me explain you in detail:-
First, Activate the Change List in the Integration Repository once the design objects are complete. By activating the change list, the object becomes available for Configuration in the Integration Directory.
Secondly, to transfer Integration scenario from Integration Repository - you need your Integration Scenario to be created correctly and when you run this wizard you actually pull the Integration scenario in the Integration directory.
You also have the option of 'Configuration Wizard'.
This tool is a wizard for creating your Recevier Determination, Receiver Agreement, Sender Agreement and Interface Determination. For this tool, you do not need the Integration scenario
It is not mandatory to use any of these tools to configure your scenario.
All you have to do for configuring your scenario is
1. Create Business system/Business service
2. Create Communication Channel
3. Create Receiver Determination
4. Create Interface Determination
5. Sender Agreement
6. Receiver Agreement
I hope this provides you a solution.
Regards.
Praveen

Tools of Integration Directory

hi
i would just like to know
whether if we use any tools like schema builder or proxy generator or configurator assistant in integration directory
regards
neha

> i would just like to know
> whether if we use any tools like schema builder or proxy generator or configurator assistant in integration directory
In Intergartion Directory we use wizard to create the bussiness scenario, there is no such tool to create the schema or proxy.
Proxies are generated in ABAP Side (R/3) by using the tcode SPROXY.

How to retrieve configuration scenarios in Integration Directory?

Similar Messages

Maybe you are looking for