How to retrieve # on-line procs in a non-global zone with resource pool

Is there any way to retrieve the #of on line processors of the machine running in a non global zone with resource pool ?
sysconf does not return this value. In fact this is an excerpt of the man:
"If the caller is in a non-global zone and the pools facility is active, sysconf(_SC_NPROCESSORS_CONF) and sysconf_SC_NPROCESSORS_ONLN) return the number of processors in the processor set of the pool to which the zone is bound."

So, from within a local zone that's in a pool (i.e. in a pool with 8 CPUs) , you want to query how many CPUs really exist in the global zone (i.e. the global zone may actually have 16 CPUs)? I don't think that's possible: in fact for security reasons it's probably intentionally disabled.
A quick workaround would be a script/cron-job in the global zone that writes a small file in the filesystem of the local zone... then from within that zone you could read the CPU count.
I'm interested though: what are you trying to set up?
Regards,
[email protected]

Similar Messages

How to install a SUN cluster in a non-global zone?

How do I install a SUN cluster in a non-global zone? If it is the same as installing SUN Cluster in the global zone, then how do I access the cdrom from a non-global zone to the global zone?
Please point me to some docs or urls if there are any. Thanks in advance!

You don't really install the cluster software on zones. You have to set up a zone cluster once you have configured the Global Zone cluster (or in other words, clustered the physical systems + OS).
http://blogs.sun.com/SC/entry/zone_clusters

How to add a second nic card to non global zone

hi every one
i have a issue like
my non global zone has hme0 as the nic card
i want to add a secondary nic card like pcn0 to the non global zone . how can i add to the nonglobal zone so that both the nic cards should exist in the nonglobal zone
please tell me the command and procedure for that
thanks in advance ....

If your non-global zone is a shared IP zone, then you can add like
zonecfg -z <zonename>
add net
set physical=pnc0
set address=<IP Address>
end
verify
commit
exit
If your non-global zone is an exclusive IP zone, then remember that the interface pnc0 you are adding will be in control of non-global zone exclusively.
Steps to add it are same as above.

How to install Oracle 10g on Solaris 10 non-global zone.

Hi,
I want to install Oracle 10g on Solaris non global zone with ASM.
I need complete doc for doing the same.
REgards
S.Ali

Check Oracle® Database Installation Guide 10g Release 2 (10.2) for Solaris Operating System.

How to enable GUI in a non global zone in solaris11?

How to enable graphical logon in a non global zone in solaris11, so the zone can be login by Xmanager? Thanks!

This guide will cover how to setup a basic VNC connection to a Solaris 11 machine. There is also an optional step to allow for persistent VNC connections.
Step 1
Configure GDM to include ‘[security] DisallowTCP=false’ and ‘[xdmcp] Enable=true’.
$ sudo gedit /etc/gdm/custom.conf
# GDM configuration storage
[daemon]
[security]
DisallowTCP=false
[xdmcp]
Enable=true
[greeter]
[chooser]
[debug]
Step 2
Configure X-Server to accept remote connections.
# svccfg -s application/x11/x11-server
svc:/application/x11/x11-server> setprop options/tcp_listen = boolean: true
svc:/application/x11/x11-server> end
Step 3
Configure the VNC service (you could change the ‘-geometry 1280×720′ to whatever resolution you would like).
# svccfg -s xvnc-inetd
svc:/application/x11/xvnc-inetd> setprop inetd_start/exec = astring: "/usr/bin/Xvnc -desktop sol11:0 -geometry 1024x768 -inetd -query localhost -once securitytypes=none"
svc:/application/x11/xvnc-inetd> setprop inetd/wait = boolean: true
svc:/application/x11/xvnc-inetd> end
** The line highlighted red is optional – only do this if you want your VNC connection to persist (as well as any potential security issues)
or
# svccfg -s xvnc-inetd
svc:/application/x11/xvnc-inetd> editprop
search for # setprop inetd_start/exec = astring: "/usr/bin/Xvnc
copy the line, uncomment the copy, makethe changes above, write the file out.
svcadm refresh xvnc-inetd
Step 4
Disable and the re-enable the GDM and VNC-inetd services for the changes to take effect.
$ su root
Password:
# svcadm disable gdm xvnc-inetd; svcadm enable gdm xvnc-inetd
If still in maintenance, reboot (I had to, don't know why).
Step 5
Point your favourite VNC client at your Solaris server and test if it accepts your VNC connection – you should be presented with a Username/Password login screen.
If you performed the optional step to make your connections persist – close your favourite VNC client and then reconnect – if you remained logged in you have a persistent connections.
Greg on said:
After a fresh text install of Solaris-11 (11/11) both xvnc-inetd and gdm are not present. After installing them (# pkg install xvnc-inetd gdm) I can’t get gdm to start:
# svcadm enable gdm
# svcs gdm
offline 10:24:03 svc:/application/graphical-login/gdm:default
Any thoughts?
Ron on said:
You are missing some X packages. Do the following:
pkg install slim_install           # installs 400+ packages
svcadm enable gdm && exit      # gdm now works
pkg uninstall slim_install           # uninstalls the installer package only

Non-Global Zones - how can I tell what the Global Zone is

Hi,
I have a host that I know is a non-global zone (ngz). I can ssh to the ngz as root or a non-privileged user.
But once there how do I know what the host name for the global zone is?
I could probably run a script from all global zones to report all running zones and so I'd know that way but I have a specific need to know from inside the ngz.
Thanks!
Brian

bdunbar wrote:
That's a built-in security feature; and I know of no way to circumvent this mechanism.
I had some hope that there was a way to 'see' at least the global-zone information from the zone. From the shell the 'zone' commands are available ..
:# zoneadm list -cv
ID NAME STATUS PATH
48 hostname_svn running / So it's at least aware that it is a zone, even if it can't tell me anything else about itself. I can still go the long way around to get the information for my need, thanks.
The global zone is the only thing that can see everything. The non-global zones can only see information specific to their zone.
This is by design and it really is a security mechanism. You don't want the zones running outside of their boundaries and information about the global zone (or any other zone) is outside the boundaries of a non-global zone.
Cheers,

How to know global zone in case non global zone is hung

....I have nongloabazone1,nongloabazone1,nongloabazone2,nongloabazone3...
i am working on nongloabazone1 ..
suppose i am giving remote support ...
if my nongloabazone1 is hung ..i need to know the global zone on which this nongloabazone1 is installed and reboot from there ...if my nongloabazone1 is hung i cannot apply #arp -a and check it out by trial and error method and know the global zone....
in this case how can i reboot the nongloabazone1 .....i have the same question in case of Ldoms also..............
Thanks in Advance.......

Hi.
It's not clear what means "non global zone is hung".
In case it realy hangs you can't do anythins in this zone.
1) In case you have access to global zone. You can get list all zones running on this host:
zoneadm list -cv
For reboot local zone from global zone just need: zoneadm -z <zone_name> reboot
2) Zones not support live migration. So after zone started it can not change global zone.
Create script that put global zone name in file. When need - just read content of this file.
This file can be created from global zone when start (or create/move) local zone.
In case zone migration is not quickly operation, just create file (or database) for list what zone started on which host.
For LDOM it look wery same.
Regards.

How to know Global zone name within Non-Global zone?

Hi everybody.
My answer is very simple: How can I (command or file) to know Global zone name within Non-Global zone? zoneadm command with all its options don�t work fine to me for this information. Thanks a lot for any idea with my question. Regards.

Hi. Global Zone�s name is unknow for me from Non-Global zone. I don�t know it, but "Global" isn�t name neither hostname, is just Solaris 10 OS in my machine. However, your link was useful for me.
Thanks a lot.

How to install JDK6 and Netbeans 6 in a non-global zone?

Hi,
I have a Solaris system where I want to deploy separate containers for several developers.
I'm having difficulty in installing JDK 6 and Netbeans 6, I get lots of missing package errors in non-global zone.
What would be the best approach for installing jdk 6 + netbeans 6 seperately for each developer?
Thanks in advance.

Hi
It depends how you have created your zone, what has been inherited from the global:
inherit-pkg-dir:
dir: /lib
inherit-pkg-dir:
dir: /platform
inherit-pkg-dir:
dir: /sbin
inherit-pkg-dir:
dir: /usr
But if you only want a jdk and netbeans, there is no really dependencies the simplest approach si to download the not packaged version and put it in /opt which is not inherited
You just have to put a jdk in /opt/jdk1.6.0... and netbeans in /opt/netbeans-6.0..
Don't really understand why you want a separate zone, one zone, several accounts which share the same jdk and netbeans, that's the way unix work ;)

How to create a separate /var partition on solaris non-global zone

Hi
I found no simple way to create a separate /var partition in solaris non-global zone.
I am using solaris 10 u9 and my root pool is zfs. My zone's zonepath is also separate zfs fs.
But, I do not know how to make the /var as a mountpoint of another zfs dataset since /var is not empty.
I also do not know if there is a way to install a zone with /var as a separate (outside '/') partition.
That will be really useful.
Any suggestion?
Thanks
Edited by: vadud3 on Sep 20, 2010 12:16 PM

I meant a separate zfs fs with mountpoint '/var' in a non-global zone.
I am insisting, because I do not want /var to fill up the '/' on non-global zone.
With default non-global zone installation, you cannot avoid that.
My zonepath itself is a zfs fs. I also have a zfs dataset provisioned to the non-global zone.
I cannot create a zfs fs out of that dataset and mount it as '/var' becasue by then non-global zone
already installed content on '/var'
I want the '/var' as a separate dir or mountpoint, the same reason global zone gives you that option during install.
Thanks

How to retrieve the Line item Text

Hello,
I need to retrieve the Line item Text in the PO (Material PO text). Can anyone provide me a sample code? i need to display this in a smartform.
I could not retrive it from the Function Module READ_TEXT.
Can any one help me regarding this?
Regards,
kvsskirankumar

HI,
Use function module READ_TEXT to fetch PO line item text by passing id, language, name and object.
For Ex:-
CALL FUNCTION 'READ_TEXT'
EXPORTING
    CLIENT             = SY-MANDT
    id                      = 'F01'
    language          = 'E'
    name                 = << concatenate PO number & line item>>
    object                = EKKO
tables
    lines                   = g_t_ltext.
Thanks & Regards
Sudheer Madisetty

How to copy file from global zone to non-global zone?

Hi,
I'm new in zone.
I have installed a zone and I would like to install some programs.
Could you please tell me how to copy downloaded file from internet to the new installed zone?
Kind regards,
Daniel

I like to use zcp which came from BigAdmin I believe.
#!/usr/bin/perl
# zcp - copy a file from the global zone to a nonglobal zone. Solaris 10.
# 10-Mar-2005, ver 0.50 (first release)
# USAGE: zcp file1 zonename:file2
# eg,
# zcp /etc/syslog.conf workzone1:/tmp
# Standard Disclaimer: This is freeware, use at your own risk.
# 10-Mar-2005 Brendan Gregg Created this.
$ENV{PATH} = "/usr/bin:/usr/sbin";
$VERBOSE = 1;
# Process arguments
# check for arguments,
if (@ARGV != 2) {
die "USAGE: zcp file1 zonename:file2\n";
# check source file exists,
$srcpath = $ARGV[0];
if (! -e $srcpath) {
die "ERROR1: Can't find source file $srcpath\n";
# check destination zone exists,
($destzone,$destpath) = split(/:/,$ARGV[1]);
chomp(@Zones = `zoneadm list`);
foreach $zone (@Zones) { $Zone{$zone} = 1; }
unless ($Zone{$destzone}) {
die "ERROR2: Can't find zone $destzone\n";
# check if destination is a directory or filename,
$dir = `zlogin -S $destzone '
if [ -d "$destpath" ]; then echo 1; else echo 0; fi'`;
if ($dir == 1) {
$node = $srcpath;
$node =~ s:.*/::;
$destpath = "$destpath/$node";
# Print message
print "zcp from $srcpath, to zone $destzone, to file $destpath.\n" if $VERBOSE;
# Copy File
system("cat $srcpath | zlogin -S $destzone 'cat - > $destpath'");
# Verify file copied
$srcsize = -s $srcpath;
$destinfo = `zlogin -S $destzone 'ls -l $destpath'`;
@Fields = split(' ',$destinfo);
$destsize = $Fields[4];
if ($srcsize != $destsize) {
print STDERR "ERROR3: Copy failed, size mismatch ".
"($srcsize != $destsize)\n";
} else {
print "Copy successful ($destpath, $destsize bytes).\n" if $VERBOSE;
}

How to print header lines at the top of every page with Alv list display?

Dear all,
I need a requirement with printing issue. A program list should be printed with the function reuse_alv_list_display.
The list has several pages and then can be printed but the header lines appear only first page when they printed. The other pages don't have header lines, they continue with the next record of the list remaining from previous page. I use the alv parameters as below:
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program       = l_repid
      i_callback_pf_status_set = 'ALV_PF_STATUS'
      is_layout                = ls_layo
      it_fieldcat              = lt_fcat
      i_default                = 'X'
      i_save                   = 'A'
      is_variant               = ls_variant
      it_events                = lt_events
    TABLES
      t_outtab                 = lt_data
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
and lt_events as below:
ls_event-name = 'END_OF_LIST'.
ls_event-form = 'ALV_END_OF_LIST'.
APPEND ls_event TO lt_events.
ls_event-name = 'END_OF_PAGE'.
ls_event-form = 'ALV_END_OF_PAGE'.
APPEND ls_event TO lt_events.
ls_event-name = 'TOP_OF_LIST'.
ls_event-form = 'ALV_TOP_OF_LIST'.
APPEND ls_event TO lt_events.
ls_event-name = 'TOP_OF_PAGE'.
ls_event-form = 'ALV_TOP_OF_PAGE'.
APPEND ls_event TO lt_events.
So, how can I print header lines for every page?
Best Regards,

Hello Saba,
Your point might be very close to solution.
Because in the selection screen of the program there are two radio buttons, one of them visits 'REUSE_ALV_COMMENTARY_WRITE' function and the other doesn't. The one which visits has a problem with header liens in every page when printing. But I couldn't find out the solution yet.
reuse_alv_list_display uses 4 event and of course I call subroutine. There are end_of_list, end_of_page, top_of_list and top_of_page. I use in the subroutine for top_of_page:
CALL FUNCTION 'LVC_TRANSFER_TO_SLIS'
    EXPORTING
      it_fieldcat_lvc         = gt_fcat
    IMPORTING
      et_fieldcat_alv         = lt_fcat
    EXCEPTIONS
      it_data_missing         = 1
      it_fieldcat_lvc_missing = 2
      OTHERS                  = 3.
CALL FUNCTION 'REUSE_ALV_LIST_WIDTH_GET'
    EXPORTING
      it_fieldcat = lt_fcat
    IMPORTING
      e_width     = l_width.
WRITE l_reptx TO l_reptx CENTERED.
NEW-LINE.
WRITE: AT (l_width) l_reptx CENTERED.
SUBTRACT 10 FROM l_width.
WRITE: AT l_width sy-pagno RIGHT-JUSTIFIED.
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
      EXPORTING
        it_list_commentary       = lt_header
I_LOGO                   =
I_END_OF_LIST_GRID       =
Do you have other suggestions ?

How to retrieve xml file from BLOB and display on browser with css/xslt

Hi All,
I am new to xml. I am storing my xml file into BLOB in database. Now in my jsp page I want to retrieve this xml file from BLOB and display in HTML/CSS/XSLT form...
Pl. guide me.. any docs..?? Logic...??
Thanks in Advance.
Sandeep Oza

Hello Sandeep!
I'm not familiar with jsp but logic should be as follows:
-in jsp page instantiate XML parser
-load specified BLOB into parser
Now you may traverse the XML tree or you might load XSL file and use transform method to transform XML according to XSL file.
I have an example where I'm selecting XML straight from relational database and then transform it using XSL into appropriate HTML output, but it's written in PSP.
You can try http://www.w3schools.com/default.asp for basics on XML, CSS, XSL. It's easy to follow with good examples.
Regards!
miki

How to retrieve a lost serial number for Photoshop Elements 13 with incomplete setup and not yet registered

Cant activate my new Photoshop software as no serial number. Used redemption card to download software. Set up Adobe account but no serial number listed and no email received to my email. What now??????

You are actually in the wrong forum
Elements Forum
But this might help
Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows

How to retrieve # on-line procs in a non-global zone with resource pool

Similar Messages

Maybe you are looking for