How to retrieve User Description for a particular MDM User from Console ?

In my Application i  have to retrieve User Descripton(a field) for the MDM Users  from Console. I am using MDM Java Api 1(MDM4j) in my application. Is there any way i can retrieve MDM User Description from Console without using MDM Admin API?

Hi Namrata,
Sorry, I have a different perspective from you (I don't work with the Java API). So, you can ignore what I said about the protocols. That's lower-level than what you would care about.
The correct thing to do is to use the Admin API to get the users, as you are doing. If you have to log in twice, it might be because you're using the old Java API.
Please verify that you're using these packages:
mdm-core.jar, mdm-common.jar, mdm-protocol.jar, mdm-data.jar, mdm-admin.jar
versus the old API, which was called mdm4.jar.
Thanks,
Cleopatra

Similar Messages

  • How to retrieve long text for a particular record

    Hi,
    I've been looking through some of the numerous posts relating to reading long texts but I can't seem to find out how to retrieve the necessary parameters for READ_TEXT for a particular record without using the GUI.
    Is there a way in ABAP that one could retrieve the parameters that are required to execute READ_TEXT just from one of the fields in the base table.  eg.  I would like to bring back a list of all materials with their associated long texts.  I can run a query on MARA for example and retrieve the necessary material information but I would like to know how I could get the necessary information, for each row in my results, to pass to READ_TEXT. 
    What information would I need to perform the above, if at all possible?
    Thanks in advance,
    Charles

    You can check out SE75.  Here is where the objects and ids are listed/maintained.  There is one trick to find the object/id.  That is,  create the text in the specific transaction.  If you are talking about header text for a sales orders, go to VA02 and enter some text and save.  Now go to SE16, enter STXH as the table name.  On the selection screen for STXH,  enter your user name for "created by" and enter the date.  Execute.  The record that you see is probably the text that you just created.  You can see the object, the id, and even how the name is built.  In this case,  it would be sales order number.
    Sometimes where you enter the text, there is a little "scroll" icon under the text editor, clicking that will tell you the object and id.  In some cases, this functionality is not there.
    Regards,
    Rich Heilman

  • How to display complete menu tree for a particular SAP user in UI5

    Hi Experts,
    I am trying to display menu tree for a particular SAP user on click of button placed in shell content.
    I am referring this link
    Displaying the Complete Menu Tree - User Interface Add-On for SAP NetWeaver - SAP Library
    But I am not getting the exact process.
    Can anyone please provide some help.
    Thanks in advance.

    >
    cranjith kumar wrote:
    > I am displayed a user name and password columns in
    > screen painter.if i will not fill any one of the two fields
    > means then a message will be display.
    > My requirement is if i wont fill the "username field"
    > means then the cursor should not move to the
    > "password"  field (i.e we should not able to enter passwords)
    > and a message should be displayed to indicating that
    > user name is invalid.
    > Kindly send me the coding for this one immediately.....
    How about you immediately try to figure it out for yuorself?  Read the SAP help on screen development and search these forums.  Here's a hint, look at things like FIELD and CHAIN in your PAI...

  • To find the User Exits for a particular Transaction.

    hi,
        I want to find the number of User Exits for a The Transaction MM01 or MM02,
        I serched in the forums but could not find satisfactory ans,
        I tried with:
                 T.Code-> System>Status->Prog Name>SE38>find Call Customer-Exit.
        But its not helping me,
        Please help me.
    Thanks and Regards
    Suraj S Nair.

    hi ,
    if you are new to user exist use --> follw the below methos to find the user exit for a particular transaction or t-code
    create one custom pgm in se38 and execute >selection screenenter t-code and execute it will return all the user exists for a specific transaction..
    Finding the user-exits of a SAP transaction code
    * Finding the user-exits of a SAP transaction code
    * Enter the transaction code in which you are looking for the user-exit
    * and it will list you the list of user-exits in the transaction code.
    * Also a drill down is possible which will help you to branch to SMOD.
    * Written by : SAP Basis, ABAP Programming and Other IMG Stuff
    *              http://www.sap-img.com
    report zuserexit no standard page heading.
    tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
             tables : tstct.
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    parameters : p_tcode like tstc-tcode obligatory.
    select single * from tstc where tcode eq p_tcode.
    if sy-subrc eq 0.
       select single * from tadir where pgmid = 'R3TR'
                        and object = 'PROG'
                        and obj_name = tstc-pgmna.
       move : tadir-devclass to v_devclass.
          if sy-subrc ne 0.
             select single * from trdir where name = tstc-pgmna.
             if trdir-subc eq 'F'.
                select single * from tfdir where pname = tstc-pgmna.
                select single * from enlfdir where funcname =
                tfdir-funcname.
                select single * from tadir where pgmid = 'R3TR'
                                   and object = 'FUGR'
                                   and obj_name eq enlfdir-area.
                move : tadir-devclass to v_devclass.
              endif.
           endif.
           select * from tadir into table jtab
                         where pgmid = 'R3TR'
                           and object = 'SMOD'
                           and devclass = v_devclass.
            select single * from tstct where sprsl eq sy-langu and
                                             tcode eq p_tcode.
            format color col_positive intensified off.
            write:/(19) 'Transaction Code - ',
                 20(20) p_tcode,
                 45(50) tstct-ttext.
                        skip.
            if not jtab[] is initial.
               write:/(95) sy-uline.
               format color col_heading intensified on.
               write:/1 sy-vline,
                      2 'Exit Name',
                     21 sy-vline ,
                     22 'Description',
                     95 sy-vline.
               write:/(95) sy-uline.
               loop at jtab.
                  select single * from modsapt
                         where sprsl = sy-langu and
                                name = jtab-obj_name.
                       format color col_normal intensified off.
                       write:/1 sy-vline,
                              2 jtab-obj_name hotspot on,
                             21 sy-vline ,
                             22 modsapt-modtext,
                             95 sy-vline.
               endloop.
               write:/(95) sy-uline.
               describe table jtab.
               skip.
               format color col_total intensified on.
               write:/ 'No of Exits:' , sy-tfill.
            else.
               format color col_negative intensified on.
               write:/(95) 'No User Exit exists'.
            endif.
          else.
              format color col_negative intensified on.
              write:/(95) 'Transaction Code Does Not Exist'.
          endif.
    at line-selection.
       get cursor field field1.
       check field1(4) eq 'JTAB'.
       set parameter id 'MON' field sy-lisel+1(10).
       call transaction 'SMOD' and skip first   screen.
    *---End of Program
    Regards,
    Prabhudas

  • How to trigger a badi for a particular screen of a transaction alone?

    friends
    am trying to issue an error msg. in the PAI of the screen SAPMQEVA (0102), which belongs to QA11/Usage decision..In the method PUT_DATA of implementation QEVA_SUBSCREEN_1101, am able to capture all the screen fields..but the problem is there are two tabstrips (Defects, Inspection Lot stock), i want to trigger the msg only in the PAI of SAPMQEVA (0102), i.e the last tabstrip (Inspection Lot stock)..but this badi triggers in every pai of QA11 and issues the error msg..but the values of the screen fields of the last tabstrip are getting filled only in the PAI of the same, but how to trigger it for the PAI of the last tabstrip alone..no parameters in the method seem to have screen no. or okcode...hav tried with badi INSPECTIONLOT_UPDATE, which doesn't solve the purpose...pl suggest
    regards
    Sathish. R

    hi
      tx for answering...i have tried in all the user exits, including the one that you mentioned, but in none of them the UD data or storage loc. data sits in..only in the badi that i've mentioned i get all the data of the screen fields...how to make it trigger for that particular screen alone, is that doable?
    regards
    Sathish. R

  • How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?

    Hi,
    How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?
    I tried with acual method as below from client '000':
    DELETE FROM USR02 CLIENT SPECIIED WHERE BNAME = 'SAP*' AND MANDT = '001'.
    After this when I tried to logon '001' using SAP* with password PASS it is giving  the message that Incorrect logon and password.
    (Also when I checked for 'SAP*' in 001 it looks like it is not got created as I queried as below:
    SELECT SINGLE * FROM USR02 CLIENT SPECIFIED WHERE BNAME = 'SAP*' AND MANDT = '001'.)
    Can anybody throw some light on this? RewardS is guranteed for solutions!
    -B S B

    Hi again:
    I forget to tell.
    You must restart the system. So, that a new user with the name "sap*" gets generated with password "pass"
    Hope this wil help,
    Eric

  • HT5824 How do retrieve my calendar for my iphone? All the events disappeared on my last sync.

    How do retrieve my calendar for my iphone? All the events disappeared on my last sync.

    to retrieve from where? If you synced with icloud all you need to do is go to settings- icloud- turn calendars on. After a minute your calendars should show up and if they do not you can try to turn off and then on again. If they still didn't show - they were never synced with icloud and then the first question to retrieve from where? comes back to us.

  • How to find condition  type for a particular material document no.

    hiiiiii
    How to find condition type for a particular material document no.

    Hi
    Condition types are maintained at PO level
    Take the EKKO-KNUMV and pass to
    KONV-KNUMV field and take the different condition types values from KONV
    Take the Material Document No (MBLNR) and pass to MSEG table and take the EBELN field and from EKKO table take EKKO-KNUMV field and pass to KONV
    see the table T685 for different condition types.
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • How to find Missing Parts for a particular Process Order?

    Hi,
    How to find Missing Parts  for a particular Process Order ?
    Is there any function module or Table ??
    Thnx in Advance.

    Hi prince roy
    you can use the T-code = <b>CO24 - Missing Parts Info System</b>
    if helpful PLEASE REWARD YOUR POINTS
    thanks
    chakri

  • How to delete the Infoobjects for a particular dimension?

    Hi,
    How to delete the Infoobjects for a particular dimension?
    ( when i was trying to delete dimensions it is saying that the dimension contains infoobjects , u can not delete the dimension, what 2 do?)
    Thanx in advance,
    Ravi.

    Ravi,
    If you want to remove the Infoobject from Dimension then you need to delete the data from the cube and then remove the infoobject from that particular Dimension. I mean delete the assignment for that Infoobject.
    Assign Points if it helps..
    Incase if you need more help.. Please call me..
    Gattu

  • How to retrieve the reference_path for a form

    Hi,
    Does anyone know how to retrieve the reference_path for a form progammatically?
    For a report the parameter p_reference_path can be used but for a form this one doen't exist.
    thanks
    Stijn

    Hi,
    Does anyone know how to retrieve the reference_path for a form progammatically?
    For a report the parameter p_reference_path can be used but for a form this one doen't exist.
    thanks
    Stijn

  • How do I find/search for a particular app or genre of them

    How do I find/search for a particular app or genre of them in Maverick app store...thx for any help...byeGeorge

    Just go to App store and type in what you want in the search box.   Say, apps for word processors, Anti virus apps, Games apps and so on.   You could also go via Google with a similar approach and lastly, the system divides up particular subjects in any event ...  under the term Categories.
    Having said that, the system isn't a mind reader.   It's up to you to refine what you've  been presented with.

  • How to display "action description " for an action

    hi,
    how to display "action description " for an action

    hi,
    Go to SPRO>Personal Management> Personal Administration--> Customizing Procedures --> Actions --> Setup Personal Actions/Create Reasons for Personal Actions.
    I think it will solve your problem.

  • Restrict PR/PO/GR for a particular company code from particular date

    Hi Experts
    How we can restrict PR/PO/GR for a particular company code from a particular date?
    I know PR is not directly linked with company code
    PO can be restricted by deactivating the assignment between company code & plant
    GR- we can use posting period option.?
    Suggest me the best solution for the above requirment.
    Thanks/karthik

    hi
    Obvoiyusly , you can stop the company code posting by not activating the month end closing of periods (MMPV) in MM and similarly in FI ( OB52).
    By removing the assignment you can stop PO creation for the company code but you need to ensure that all the old, un-finished PO/SA and other related activities are taken care off before that.
    Regards

  • How to disable Transactional Iview for a particular user in portal

    Hi Experts,
    I have a scenario
    i have created a user group for all the employees and assigned all the transactional roles to it, now the issue is they wanted to disable the Transactional Iview to particular user for a certain period and enable it later on, how is it possible?
    As per my knowledge we have to assign that particular Role individually to all the user, instead of user group and make the iview invisible when required.
    Instead of this is there any other Easy Method that i can approach the issue easily?
    Thanks Inadvance
    Siva

    Hi Siva,
    You can have two types of groups: one Group with users having access to transactional iview and another devoid of this access.
    You can assign users to group with transactional role and vice versa. By the way of user groups, we will have more control over the transaction role access.
    Regards,
    Ganesh N

Maybe you are looking for