How to trigger a badi for a particular screen of a transaction alone?

friends
am trying to issue an error msg. in the PAI of the screen SAPMQEVA (0102), which belongs to QA11/Usage decision..In the method PUT_DATA of implementation QEVA_SUBSCREEN_1101, am able to capture all the screen fields..but the problem is there are two tabstrips (Defects, Inspection Lot stock), i want to trigger the msg only in the PAI of SAPMQEVA (0102), i.e the last tabstrip (Inspection Lot stock)..but this badi triggers in every pai of QA11 and issues the error msg..but the values of the screen fields of the last tabstrip are getting filled only in the PAI of the same, but how to trigger it for the PAI of the last tabstrip alone..no parameters in the method seem to have screen no. or okcode...hav tried with badi INSPECTIONLOT_UPDATE, which doesn't solve the purpose...pl suggest
regards
Sathish. R

hi
tx for answering...i have tried in all the user exits, including the one that you mentioned, but in none of them the UD data or storage loc. data sits in..only in the badi that i've mentioned i get all the data of the screen fields...how to make it trigger for that particular screen alone, is that doable?
regards
Sathish. R

Similar Messages

How to Find BADI for a particular FM

Dear Abapers,
How do I find a BADI for a Particular Function Module.
I did google and found three methods but none helped.
1) going to Transaction se37 to find your function module. Locate the function SXV_GET_CLIF_BY_NAME.
this doesnt help me because i dont want to find badi for a transaction.
2) got se24 and put a break point in the method of class cl_exithandler. I tried this didnt help.
3) taking the pacake name and going to se80 and enter it there, you see enhancements. I did this , found the package name of that FM which is WZRE. but there are lots of enhancements and badis. i cant find the related one with discription.
my FM is IDOC_INPUT_SINGLSETTRQS_CREATE. I really need help to find the correct badi for this.
any help is appreciated.
thanks.

Hi,
To find a BADI for any enhancement follow these steps,
1) Put a brak point in method CL_EXITHANDLER=>GET_INSTANCE. This will give you the EXIT_NAME and the implementing class name of the BADI.
2) Remove IF_EX from the implementing class this provides you the BADI name.
Regards
Ram

How can i find the exact BADI For a Particular Transaction

hi ppl,
How can i find the exact BADI For a Particular Transaction. Is there any Standard transaction or Programs to do this or suggest some other way.

Use this code:
*& Report ZGET_BADI
REPORT ZGET_BADI.
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
*Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
*Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
*For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Regards
Vinayak

How to find condition type for a particular material document no.

hiiiiii
How to find condition type for a particular material document no.

Hi
Condition types are maintained at PO level
Take the EKKO-KNUMV and pass to
KONV-KNUMV field and take the different condition types values from KONV
Take the Material Document No (MBLNR) and pass to MSEG table and take the EBELN field and from EKKO table take EKKO-KNUMV field and pass to KONV
see the table T685 for different condition types.
<b>Reward points for useful Answers</b>
Regards
Anji

How to find Missing Parts for a particular Process Order?

Hi,
How to find Missing Parts for a particular Process Order ?
Is there any function module or Table ??
Thnx in Advance.

Hi prince roy
you can use the T-code = <b>CO24 - Missing Parts Info System</b>
if helpful PLEASE REWARD YOUR POINTS
thanks
chakri

How to delete the Infoobjects for a particular dimension?

Hi,
How to delete the Infoobjects for a particular dimension?
( when i was trying to delete dimensions it is saying that the dimension contains infoobjects , u can not delete the dimension, what 2 do?)
Thanx in advance,
Ravi.

Ravi,
If you want to remove the Infoobject from Dimension then you need to delete the data from the cube and then remove the infoobject from that particular Dimension. I mean delete the assignment for that Infoobject.
Assign Points if it helps..
Incase if you need more help.. Please call me..
Gattu

How do I find/search for a particular app or genre of them

How do I find/search for a particular app or genre of them in Maverick app store...thx for any help...byeGeorge

Just go to App store and type in what you want in the search box. Say, apps for word processors, Anti virus apps, Games apps and so on. You could also go via Google with a similar approach and lastly, the system divides up particular subjects in any event ... under the term Categories.
Having said that, the system isn't a mind reader. It's up to you to refine what you've been presented with.

How to find out all the OKCODEs for a particular screen?

I am working on t-code CL20N and trying to record with t-code SHDB, in the second screen when I press enter it is coming out, but when I run CL20N without SHDB it is going through all the screens perfectly, SHDB is not working for CL20N.
Is there any other way to find out all the OKCODEs for a particular screen/s?

Hi,
First look for any push button or menu item which can take you to the second screen instead of hitting enter directly in tcode CL20N . If any such button exist in the TCode, u can use the same button in SHDB also for moving to the second screen.
Thanks,
Rajinikanth G

How to post credit memo for a customer usin F-27 transaction using IDOC .

Can somebdy please advise as to how to post credit memo for a customer using F-27 transaction using IDOC ?
Thanks in anticipation ,
Ambar patil .

Hi,
https://websmp207.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700001305932005E
https://websmp201.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000051812008E
Thanks,
Mansoor

How to find user exit for a perticular screen?

Dear all,
Can some one tell me how to find user exit for a perticular screen?
ex: MC88 screen can we figure out are there any user exit for that screen!!
Regards,
Vj

User exits are built into the Standard SAP code. You just activate them and insert your code into the include programs.
Here is a program that will list the user exits per transaction code. Not perfect, but it may help.
report z_find_user_exit no standard page heading.
tables: tstc, tadir, modsapt, modact,
        trdir, tfdir, enlfdir, tstct.
data : jtab like tadir occurs 0 with header line.
data : hotspot(30).
parameters : p_tcode like tstc-tcode obligatory.
at line-selection.
get cursor field hotspot.
check hotspot(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
start-of-selection.
perform get_data.
perform write_list.
      FORM get_data                                                 *
form get_data.
select single * from tstc
              where tcode eq p_tcode.
check sy-subrc eq 0.
select single * from tadir
            where pgmid = 'R3TR'
              and object = 'PROG'
              and obj_name = tstc-pgmna.
if sy-subrc ne 0.
    select single * from trdir
             where name = tstc-pgmna.
    if trdir-subc eq 'F'.
      select single * from tfdir
                     where pname = tstc-pgmna.
      select single * from enlfdir
                     where funcname = tfdir-funcname.
      select single * from tadir
                     where pgmid = 'R3TR'
                       and object = 'FUGR'
                       and obj_name eq enlfdir-area.
    endif.
endif.
select * from tadir into table jtab
             where pgmid = 'R3TR'
               and object = 'SMOD'
               and devclass = tadir-devclass.
select single * from tstct
          where sprsl eq sy-langu
            and tcode eq p_tcode.
endform.
      FORM write_list                                               *
form write_list.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
    write:/(95) sy-uline.
    format color col_heading intensified on.
    write:/1 sy-vline,
    2 'Exit Name',
    21 sy-vline ,
    22 'Description',
    95 sy-vline.
    write:/(95) sy-uline.
    loop at jtab.
      select single * from modsapt
      where sprsl = sy-langu and
      name = jtab-obj_name.
      format color col_normal intensified off.
      write:/1 sy-vline,
      2 jtab-obj_name hotspot on,
      21 sy-vline ,
      22 modsapt-modtext,
      95 sy-vline.
    endloop.
    write:/(95) sy-uline.
    describe table jtab.
    skip.
    format color col_total intensified on.
    write:/ 'No of Exits:' , sy-tfill.
else.
    format color col_negative intensified on.
    write:/(95) 'No User Exit exists'.
endif.
endform.
SMOD, is where you can find the system modifications provided by SAP. CMOD is where you will implement them. If you are looking for all the enhancements provided, then go to CMOD, follow the menu, 'Utilities-->SAP Enhancements'. This will take you to a screen where if you just execute it, you will get all the enhancements provided by SAP.
It is always difficult to find a user exit if all you have is a program name or a transaction code, unless you do a program like Rich suggested. But even there, you will not be able to find user exits that are implemented as sub-routines(also called forms not sapscript forms). Most of the user exits are documented under the corresponding task under IMG structure. So use transaction code SPRO, go to the IMG structure, choose the application area that your program or transaction might be and then you should find a task that talks about enhancements. If you execute that task most often it will take you to CMOD and sometimes to SE38. But all you want to know is there in the documentation attached to the task. Then you can go to CMOD and see which components are there.
Regards,
Amey

How to use lock pattern for ur home screen in pod touch 4g(ios 5)

how to use lock pattern for ur home screen in pod touch 4g(ios 5)

Video formats:
H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
Support for 1024 by 768 pixels with Apple VGA Adapter; 576p and 480p with Apple Component AV Cable; 576i and 480i with Apple Composite AV Cable (cables sold separately)

How much i need pay for ipad 2 screen ?

How much i need pay for ipad 2 screen ?

Out of warranty replacement costs start at 249 and go up for an ipad 2.
You can find replacements cheaper as non-authorized places, but once you use them Apple will wash their hands of your device so if it has any warranty left, that warranty will be void.

How to create a sequence for an particular item in my apex form

Hi friends,
I created an database application, of a form with a report, and it is working fine...
But in my form, i have a requirement....The below are the existing fields in my form
issue no
created by
start date
status
priority
due date
Among these fields in my form i need to create a 'Sequence' for my field "issue no",
So that whenever i opened the form the 'issue number' must generate automatically like 1 for the first time, 2 for the second time and so on..
For that i created a sequence
CREATE SEQUENCE "ORDERS_SEQ"
MINVALUE 1
MAXVALUE 999999999999999999999999999
INCREMENT BY 1
START WITH 1000
NOCACHE
NOCYCLE;
But for validation where i need to write the sequence query for the particular item 'issue no'....i dont have any idea of where to write the validation query for the sequence..
please tell where i need to write in step wise manner..please help me friends...
As the below is my validated sequence query for item 'issue no'
'select seq.issue_id.nextval into issue_no'
This is my above validation query whether the query that i mentioned is right..if not let me know the validation query..
And also i need where to apply this validation query in steps..
Thanks in advance
Regards,
Harry...

Harry,
Rik is on the right track. Here is a sample insert trigger: Would need to substitute you sequence ORDERS_SEQ with my sequence las_log_seq, how you define or use timestamps is up to you.
DROP TRIGGER LASDEV.BINS1_LAS_LOG_TBL;
CREATE OR REPLACE TRIGGER LASDEV."BINS1_LAS_LOG_TBL"
   BEFORE INSERT
   ON las_log_tbl
   FOR EACH ROW
BEGIN
   -- Description: Insert log_seq, creation_dt, creation_id,
   --              lst_updt_dt and lst_updt_id.
   -- Maintenance:
   -- Date        Actor          Action
   -- ====        =====          ======
   -- 07-Sep-2010 J. Wells       Create.
   :new.creation_id := nvl( v( 'app_user' ), user );
   :new.creation_dt := SYSDATE;
   :new.lst_updt_dt := :new.creation_dt;
   :new.lst_updt_id := :new.creation_id;
    SELECT las_log_seq.NEXTVAL
      INTO :new.las_log_seq
      FROM DUAL;
END bins1_las_log_tbl;
/Heff

How to create a BADI for the sceanrio

Hi abapers,
I have a scenario as follows.
I create a Transaction where in i put the details of the product and quantity for a particular project's site. The amount gets calculated based on the products unit value and its displayed in net value field. Now the user saves the transaction and a number gets generated. If the net value amount is less than 500 then the user can approve , if its greater than 501 and less than 1500 then a mail should be generated to his superior who is able to approve and ifs amount is greater than 1501 then a mail should be generated to the top of hierarchy who should approve it.
Now the real challenge is if the same project card has more than 1 new request and the amount is less than 500 the user should not be able to approve instead it should generate a mail to his hierarchy for approval since the site has already been exceeded its limit of approval. bcoz earlier 500 and current 400 which will make it to greater than 500.similarly for the hiearchy.How do i go about it.
Now i want to create a BADI on the save event of transaction to check the net value amount as well as check for earlier amounts saved for the particular site.
Any help will be appreciated.
Regards,
Navin .

hai navin
r u using ECC 6.0 or 4.7 if 4.7 u can create badi defintiion directly form se18 transaction
and define the interface and its methods , once u define them activate them
and to use in ur code u create an instance of ur badi name
and then use
cl_exithandler=>get_instance method in instance name parameter just pass ur badi name and this will create a badi defintion in ur code, and an oen can implement it
if u r usign ecc6.0 then u can either create new badis usign enhancments or classical badis
for clasical badis just go to menu utilites and create classical badis and follw the sam eprocedure
regards
m.a

How to restrict Option values for a particular metadata in profile checkin

How to restrict Option values (drop down) for a particular metadata in profile checkin-
Metadata field Color is having options dropdown values (stored in table/views)-
Display name - Blue, Value=1
Display name - Red, Value=2
Display name - Yellow, Value=3
Display name - Green, Value=4
Display name - Black, Value=5
For a particular profile checkin form, for the metadata field Color I want the dropdown value consist of only top three options
Display name - Blue, Value=1
Display name - Red, Value=2
Display name - Yellow, Value=3
But this should be done on profile level only, should not impact the standrad checkin form and other profile checkin forms.
Please help me if any one having any suggestion to implement the above secnario
Thanks,
Sumit

Hi,
Into the rule containing the Color metadata, you can restrict the values of the list.
In "Has restricted list and pane", list the values 1, 2 and 3 (new line for each value) :
1
2
3
Romain.

How to trigger a badi for a particular screen of a transaction alone?

Similar Messages

Maybe you are looking for