How to run 1 service

I didn't run solaris for years. And this is a new contact.
In the good old time, it was possible to boot as siingle user, go to /etc/init.d and run a
sh service
as I can always do with other *nix.
how can I run ONE service with this "@#{[~#{|[(" smf.
Do I have to completely configure a special runnning level.
It seems to me that sun want an AIX 6 !

What exactly is your question? Are you trying to start an existing
service? Or are you trying to install some new software and
you're tryingo to find out how to start that service under smf control?
To start an existing service:
- if it hasn't been converted to "smf"
/etc/init.d/service start
e.g. /etc/init.d/samba start
- if it has been converted to "smf":
svcadm enable -t {service_id}
e.g. svcadm enable -t svc:/system/keymap:default

Similar Messages

How to run business services as dynamically generated Subject?

Hi experts,
I have configured a business service which puts a message on a JMS queue in a weblogic container other than ALSB's weblogic container.The queue is configured with a security policy [say a 'MessagePublisher' role], so that only users with role of 'MessagePublisher' can send message to that queue.
We have different partners SFTPing messages(xml/csv/excel format) to us, of which only few of them would have a role of 'Message Publisher'. I have configured a proxy to read these files from a directory, however sender of some of these messages may not have a role of 'Message Publisher'.
I am expecting the senders' credentials to be appended to the message by some process on SFTP server. How can I generate a 'Subject' within a proxy using these credentials and do a run as on the business service, so that only users with the role of 'MessagePublisher' succeed in sending message to the queue.
I probably can configure my business service to run as a user account who has the relevant role, but I do not want to hard code the UserAccount within business service and obtain a user account using sender's credentials.
Is ALSB not supposed to be used as suggested above?Would highly appreciate any thoughts on this..
Regards.

The JMS business service can use only a static service account. I think this has an undesirable implication that the business service cannot be invoked as a dynamically generated subject.
Only way I know of to enforce role based access control in this scenario is to have an extra proxy service in front of JMS business service. Enforce access control over this extra proxy service.
To invoke this extra proxy service with credentials embedded embedded in the message, I think you need to look at "custom authentication" option under message level security. I am not sure how this would work. May be someone here can explain that.

How to run Naming service in WebAs server using telnet

Hi
i have a requirement to start a naming service in WebAs server.I have seen all the services running in server using telnet.But i haven't find naming service.So i have to start it.so pls send me the command and the way how to start it.

Hello Bhogi,
The naming service is a core service so it should always be started. You can check it via telnet using lss command on the server shell or in the visual administrator if you navidate to server-> services -> JNDI Registry.
I suspect that you have not seen the naming service via telnet as you were on the dispatcher node instead of on the server.
Best Regards
Vyara

How to run a batch file as windows Nt service

Hi friends
I want to know how to run a batch file as windows NT service.
I got some information in the following link
http://support.microsoft.com/kb/q243486/
I tried it but i want to know what we need to include in Autoexnt.bat
And one thing i need Instexnt.exe file. I cannot find tht file.
Please search tht file and send me tht file or else send the link in which this file is present
Please give me reply fast.its very urgent.
Thanks in advance.

Hi,
My aim is to run a MS-DOS Batch file, that I created to run a Java Prgram.
I need to call the Batch File from the Oracle Procedure, Also I may need to change the content of the Batch File (Argument to the Java JAR File ).
I can keep the JAR FIle either in the Oracle Server or in the Application Server.
The Java program is to convert XML Format FIle to PDF and MS Word format.
Oracle Version : 10g 2.0.1.0.
Thanks in advance
Rizly

Let me know how to run high availability services in system 9 essbase.

Hi
Let me know how to run high availability services in system 9 essbase.
thanks in ADV
Message was edited by:
user624564
Message was edited by:
user624564

Hi,
Now i am using essbase system 9.2 version,
& URL : http://localhost:11080/eds/EssbaseEnterprise
plz guide me to download the High Availability servers .
thanks in Adv....

How to run "WCF Workflow Service Application" (C# project) using "WCF Test Client" in VS 2013 ?

I have created a WCF Workflow Service Application of C# project.
How to run the project using WCF Test Client directly from VS 2013 by doing F5 ?
Iam using VS 2013 (.NET 4.5.1). It throws an exception to compile c# expressions.
Can we set any settings in web.config file ?
Please provide the solution.

Bhanu Prakash T,
It surprises me that building a simple WCF Workflow Service Application project in VS 2013 is giving you this problem. That project template should result in a file with an extension of ".xamlx" being generated. With .Net 4.5 and C#, that XAMLX
file will contain CSharp* activities for the expressions that you specified in the workflow definition. By default, those expressions will be compiled when you use "F5" to execute the workflow.
Or are you self-hosting the WorkflowServiceHost and loading the XAMLX file yourself using ActivityXamlServices.Load and then creating and managing the WorkflowServiceHost object instance yourself? You must can do the compilation yourself by following these
examples -
https://connect.microsoft.com/VisualStudio/feedback/details/741537/cannot-self-host-a-workflow-service-using-c-expressions or http://wf.codeplex.com/discussions/444990.
Jim

How To Run OIM Under Weblogic As A Windows Service?

Hi
does anyone know how to run OIM under Weblogic as a windows service?
Many thanks in advance,
Evanela

Hi
Does anyone know how to run OIM under Weblogic as a windows service?
I have used "Setting Up a WebLogic Server Instance as a Windows Service" (http://download.oracle.com/docs/cd/E12839_01/web.1111/e13708/winservice.htm#START143), but It doesn't work because OIM use the xlStartWLS.cmd file and not startWebLogic.cmd.
thanks!
Edited by: user13082223 on Sep 29, 2010 9:09 AM

How to run distiller 5.0 as localsystem service

We have been running distiller as a windows 2000 service along with our Formscape application. In the past the service was running under the formscape account. Occasionally, the service will stop running if the formscape user is not logged in. Not sure why this is. I've been told to run this service as the localsystem instead, however, nothing happens when files come in this configuration. I believe this is due to there is no way to specify "watched folders" for the localsystem user. I think each user can log in to the server and customize the "watched folders" to their liking, so when running as a service under "formscape" user, it will look at the watched folder settings for formscape.
How do we either set the watched folders for the local system user or ensure that the service keeps running under formscape even if formscape user logs out?

Was this the special Distiller Server product? Or just the Distiller that comes with Adobe Acrobat?
Because the regular one is not only not designed for server use, it's not licensed for it either. (Take a look at the warning on the watched folder set up screen as well as the EULA).
Sorry not to have better news, but it's best to get this sorted.

How to run WLS 7.01 as NT service ?

Does anyone have sample of how to run WLS 7.01 with JDK 1.4 as NT service on NT4 ?
Thanks,
Jessie

Jessie Yau wrote:
Does anyone have sample of how to run WLS 7.01 with JDK 1.4 as NT service on NT4 ?
Thanks,
JessieI know how to run it as a service, but JDK 1.4 is not supported.
Wayne Scott

How to create iView to run Web Service

Hi,
I need create iView on EP7 NW2004S SP12 portal to run Web Service provided on SRM 6.0 system.
Here is how I have attempted to create the iView:
1. Right click and select New =>iView.
2. Select "iView Template" radio button.
3. Select "Web Service iView" radio button to specify Web Service Template.
4. Enter name and ID of iView.
5. Select System Alias of System defined earlier.
At this point, the portal attempts to connect to the ECC system, and it fails with this error, and I cannot finish the create of the iView.
Could not connect to back-end application. Check your system. The server may be down or there may be an error in a system parameter.
Here are the key parameters defined for the System referenced by the system alias:
WSDL_URL:http://sap2.mycompany.com:50000/SRM-MDM/SRM_MDM
Logon Method:UIDPW
User Mapping Type:admin, user
CodeLink:com.sap.portal.systems.webservices.webservice_system
I've also created a usermapping for the Everyone group, and provided the userid and password for the system alias successfully.
Thanks,
Kevin

Thank you for that information. I had not previously seen a procedure on how to setup an iView to run a web service.
I had created the System just as described in this blog, but I still have a problem. When creating the iView (on the last step of process when I click Finish), the portal attempts to connect to the SRM system, and it fails with the error highlighted below.
Could not connect to back-end application. Check your system. The server may be down or there may be an error in a system parameter.
I get an error in System Administration as well when I test the connectivity for the System object.
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results:
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
How does the security need to be setup to make this work? Or what could be causing this error? I do have SSO configured between the portal and the target system.
Thanks,
Kevin

How to run a report from WCF

hi,
I am trying to run a report from a WCF service application, and then render it in PDF Format to a caller WPF application. But I cant get it! In more detail, this is what my app should do
1. from WPF, call a web service procedure, pass a report name, report path and parameters. Report is store at the same server where Web Service is installed
2. WCF procedure loads report, set parameters, retrieve data from DB and renders it as an array of bytes
3. WPF gets the array, save it into a PDF file, then open it.
this is the code of the WCF procedure.
    Function DownloadCRReport(codEnte As String, connString As String, reportDir As String, reportName As String, Parameters As Dictionary(Of String, Object)) As Byte() Implements IGesiService.DownloadCRReport
        Try
            Dim bytes As Byte()
            Dim infile As BinaryReader
            Dim fs As FileStream
            Dim rep As New ReportDocument
            Dim RepAddress As String
            logPath = reportDir & "log\"
            sb = New StringBuilder()
            timestamp = Now.Year.ToString & Now.Month.ToString & Now.Day.ToString & Now.Hour.ToString & Now.Minute.ToString & Now.Second.ToString
            logFileName = timestamp & "_" & reportName & ".txt"
            logFile = New StreamWriter(logPath & logFileName, FileMode.CreateNew)
            logFile.WriteLine("----
Date and time: " & Now.ToString & " -
            If My.Computer.FileSystem.FileExists(reportDir & reportName & ".rpt") = False Then
                Throw New Exception("file RPT non found in: " & reportDir)
            End If
            RepAddress = reportDir & reportName & ".rpt"
            logFile.WriteLine("rep address: " & RepAddress)
            rep.Load(RepAddress, OpenReportMethod.OpenReportByDefault)
            logFile.WriteLine("load rep")
            If rep.DataSourceConnections.Count > 0 Then
                rep.DataSourceConnections.Item(0).SetLogon("usr", "pwd")
                logFile.WriteLine("data source connection")
            End If
            For Each i In Parameters
                rep.SetParameterValue(i.Key, i.Value)
                logFile.WriteLine("param: " & i.Key & " - " & i.Value)
            Next
            Try
                fs = rep.ExportToStream(ExportFormatType.PortableDocFormat)
                logFile.WriteLine("export to stream")
                infile = New BinaryReader(fs)
                logFile.WriteLine("created binaryreader")
                bytes = infile.ReadBytes(CInt(fs.Length))
                logFile.WriteLine("render pdf. fine")
                logFile.Close()
                Return bytes
            Catch ex As Exception
                logFile.WriteLine("vbCrLf & ex.Message & vbCrLf & ex.InnerException.Message)
                logFile.Close()
                Return Nothing
            End Try
        Catch ex As Exception
            logFile.WriteLine("vbCrLf & ex.Message & "-" & vbCrLf & ex.InnerException.Message)
            logFile.Close()
            Return Nothing
        End Try
    End Function
I detected that error occurs on rep.ExportToStream(ExportFormatType.PortableDocFormat). I should point out that the same procedure works under WPF application. In the WCF server I installed CR Runtime engine for .NET framework (13.0.9.1312) and CR version for Microsoft Visual Studio (same version). Moreover, all DB operations are stored into the report, so I should not pass any dataset, just parameters.
Anyway, just to begin, I tried to call a simple report with just two string parameters and no queries, but I alwais get error ("An exception of type 'System.NullReferenceException' occurred in MyApp... Object reference not set to an instance of an object)!
How can I make it work? thanks for help

hi Ludek,
Im trying to change DB connection info at runtime for all of the report tables. this is the code I used in my Web Service
          Function DownloadCRReport(...)
If rep.DataSourceConnections.Count > 0 Then
   Dim conn As New ConnectionInfo
   Dim tabLogon As TableLogOnInfo
   conn.ServerName = "10.10.15.90" 'IP address of DB server
   conn.DatabaseName = "MyDB"   'Database name as set in TNSNAMES.ORA
   conn.UserID = "newuser"
   conn.Password = "newpwd"
   For Each t As Table In rep.Database.Tables
      tabLogon = t.LogOnInfo
      tabLogon.ConnectionInfo = conn
      t.ApplyLogOnInfo(tabLogon)
      logFile.WriteLine("changed logon tab. " & t.Name)
   Next
   rep.Refresh()
   logFile.WriteLine("changed data source connection")
End If
'set parameters
If Not IsNothing(Parameters) Then
   For Each i In Parameters
      rep.SetParameterValue(i.Key, i.Value)
      logFile.WriteLine("set parameter" & i.Key & " - " & i.Value)
   Next
End If
fs = rep.ExportToStream(ExportFormatType.PortableDocFormat)
          End Function
that comes to an error on rep.ExportToStream: "Unable to access database".
Running web service in debug mode, I noticed that, after t.ApplyLogonInfo(tabLogon), the new ConnectionInfo has "password" property empty. Maybe this could cause the error, or is there some mistake in the new connectioninfo?

How to call web service using J2SE 1.3?

Dear All,
i have developed a web service by jdev 10.1.3 (JAX-RPC with web service security
enabled).
i generate the ws proxy (jdev 10.1.3) and run it with wsclient_extended.jar (required JDK 1.4.1 or above??).
but one of my client say he has to use J2SE 1.3.x (as OS=AIX 4.3 that without J2SE
1.4.x ), could anyone tell me how can generate ws proxy (with supporting
library) for jdk 1.3.x?
if oracle don't have such library / tools, any third party tools / library available?
thank you.
lsp

I'm found answer:
Java and SAP Portal blog: How to call web service from java code example

How to create a service order and check the internal order in R/3

Required Solution:
1. How to copy existing service order and create new one and check the internal order in R/3, whether the certain service order is correctly created in r/3, can you polease explain the steps plz.
2. If i am creating service order by service template finally the service order is getting created but it is not showing me in the table iaom_crm_aufk, how to check this.
can any one help me in this issues as soon as possible.

Hello Zita,
Try to restart your portal after creating <b>ServiceUser</b> in both UME and KM.
One more major difference between ServiceUser and normal portal user is that a ServiceUser does not have a UserAccount (IUserAccount)
Object serviceContext = null;
        try {
            serviceContext = AccessController.doPrivileged(new PrivilegedExceptionAction() {
                public Object run() throws WcmException {
                    return ResourceFactory.getInstance().getServiceContext(CONTRACT_SERVICE_USER);
        } catch (PrivilegedActionException e) {
            logger.severe(e, "ResourceContext for the technical " + serviceUser +
                 " user could not be retrieved.");
IResourceContext resCtx = (IResourceContext) serviceContext;
So I modify all KM resources with this resCtx.
Hope this helps ...
Greetings,
Praveen Gudapati
p.s. Points are always welcome for helpful answers

How to run the mappings in owb?

Hi,
I am new to owb pls say that how to run the already created mappings in owb.My dba have loaded the data in the oracle i neeed to uppend the data in to owb.pls help me.
Thanks,
raju
Edited by: 814740 on Nov 23, 2010 12:49 AM

You need to make sure that OWB control center service is running . You can check this by show_service.sql (OWB_HOMW\owb\rtp\sql)
Then logon to OWB designer --- > goto control center ----> select the mapping you want to run .
Verify that it is deployed successfully . If yes the click on start , your mapping execution will start .
See the result .
Thanks,
Sutirtha

How to Expose LogOff services as an iview on TopLevel Navigation

Dear Experts
I need to provide a logoff iview in Top Level Navigation.
I have created a pdk application for this. It is providing the basic functionality of logoff, but after logoff it is redirecting to the default portal logon page instead of my custosed logon page.
Code of LogOff services.
IAuthentication Authen = UMFactory.getAuthenticator();
HttpServletRequest req = request.getServletRequest();
HttpServletResponse res = request.getServletResponse(true);
Authen.forceLogoffUser(req, res,"http://ssvepd00:50000/irj/portal/anonymous/LogOnPage?guest_user=JTCGuest");
Could you please suggest me where I am missing? Is it anything to do with ume.logoff.redirect.silent property?
PAppreciate your response..
Regards
Shanmukha Rao Banisetti
Ph: 9916736946

Hi! I guess it's nice to get called upon by name. :-)
As user878 mentions, the problem trying to execute tmloadcf is related to the fact that the associated IPC resources are already considered active by Tuxedo, i.e., you did a tmboot with a given TUXCONFIG and that Tuxedo environment is still running.
Specifically to answer your questions:
1)can my application placed in any folder other and execute compile tmloadcf from there?Where the files reside is almost immaterial. What is key is what the environment variable TUXCONFIG points to. That file defines a Tuxedo environment and is created with the tmloadcf command. Once the application is booted, you can't use tmloadcf to change the configuration. You either need to use the tmconfig command or shutdown the environment and then issue the tmloadcf command and then reboot the environment.
2)How to test my service using command prompt.Tuxedo only provides a generic command line client for Tuxedo services that use FML or FML32 buffers. The commands are ud and ud32. For Tuxedo services that use other buffer types, you will have to develop a specific client.
I have also updated the Jrepository .The Jolt repository is only needed if you are using Jolt, the Java client API to Tuxedo services.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

How to run 1 service

Similar Messages

Maybe you are looking for