How to run ABAP programs in another client?

Hi:
If one user wants to run his ABAP program that resides in Client 900 with the data in Client 500, can he do it? both the clients reside in the same SAP system (the same physical SAP server).
If you've some idea about this, please help.
Thuan Nguyen

Hi Christoph:
Thanks a lot for your help on this.
If the Client 900 is for ABAP development (the user creates ABAP programs inside this client) and the Client 500 stores the data, can the user log in the client 500 and run his ABAP programs in Client 500?
Thanks
Thuan Nguyen

Similar Messages

How to add Abap program in process chain to check the another process chain status and do accordingly

Hello All,
My requirement is related to process chain 1 . I have one process chain in that i have to put abap program in middle of that chain . This program will check the status of one another process chain 2 status ( whether it was completed or it is going on). if it is completed then continue the Process chain 1 to further activity else wait to complete Process chain 2 .
Here i have to use process chain 2 as a parameter.
Kindly provide me solution .
Regards
Saurabh

Hi Saurabh,
You need to create ABAP program in which you check the values for required process chain in
following table
RSPCLOGCHAIN (Feilds ANALYZED_STATUS LOG_ID)
Depend on values you can trigger next process or you can wait unitil this process chain complete.you need to check status from table using ABAP.
If you are not aware about how to write ABAP program then take help from ABAP Team.
Regards,
Ganesh Bothe

Error When Run ABAP Query in Different Client

Hi ABAPers,
Currently I develop ABAP Query using SQ01 / SQ02 / SQ03.
Everything goes well, and I have already test that the query work well. The query can be execute and show the result correctly.
My peer in same SAP system, but different client, run the same query. As I know that query is same with ABAP program which is client independent, can be execute across client. But then the runtime error show up.
The error said that
Exception condition "NO_POSITION_FOUND" raised.
Can anybody told me what's happened here, and how can I resolve this problem?
Thank you in advance
Regards
Hadi

Hi,
Since you are testing it in other client,i think due to data inconsistency you are getting that error.
Try to check the corresponding tables in both clients and can verify.
Cheers,
KK.

How to call one program from another program

Hai,
How to call one program through another program.
Example.
   I have two programs 1.ZPROG1 2. ZPROG2.
When i execute ZPROG1 at that time it should call ZPROG2.

Hi ,
u can use submit statement to call a program .
DATA: text       TYPE c LENGTH 10,
      rspar_tab TYPE TABLE OF rsparams,
      rspar_line LIKE LINE OF rspar_tab,
      range_tab LIKE RANGE OF text,
      range_line LIKE LINE OF range_tab.
rspar_line-selname = 'SELCRIT1'.
rspar_line-kind    = 'S'.
rspar_line-sign    = 'I'.
rspar_line-option = 'EQ'.
rspar_line-low     = 'ABAP'.
APPEND rspar_line TO rspar_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'H'.
APPEND range_line TO range_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'K'.
APPEND range_line TO range_tab.
SUBMIT report1 USING SELECTION-SCREEN '1100'
               WITH SELECTION-TABLE rspar_tab
               WITH selcrit2 BETWEEN 'H' AND 'K'
               WITH selcrit2 IN range_tab
               AND RETURN.
regards,
Santosh thorat

How to run ABAP Function Module in Background Wchich Takes Long Time to Run

How to run ABAP Function Module in Background FOR LONG TIME
I am not that experienced with ABAP. I am on SAP BI 7.0. I WANT TO RUN A FUNCTION MODULE
RSDRT_INFOCUBE_DATA_COPY.
I used SE37 and then executed the module, I supplied the parameters on the form which opped-up and then program started running. . Program was however interrupted after 10 minutes by ABAP. How can I run it in background without interruption?
THANKS A LOT.

Hi,
You can call this FM in a program and run that program in background.
Regards,
Raju

Is there any way to run abap program in dialog process with process chain?

Hi.
I just want to run custom abap program in every 30min.
so I made process chain and connect abap program.
but it returns NOTHING when background running.
the program has ABSOLUETLY no problem when it's running DIALOG process.
custom program is modified from sap standard program for my use.
so complicated and hard to read that I cann't figure out what's problem in backgound job and even hard to debug in background process.
is there any way to run abap program in dialog process in every 30 min.?
or call BSP page or call function.
any solution will be helpful that excuting PROGRAM or FUNCTION or BSP PAGE in schedule job and should running dialog process.
thanks.
Lee.

Hi,
did you try using sm36 transaction?
1Give these values in Gereral data
Create one sample job "SAMPLE JOB"
Priority "A"
Execu target - Your application server
2Click start conditon
schedule according to ur requirements.
3.Click Step button
Give your ABAP program name.
fill variants if it has any variants.
if it is useful assign points
Regard,
Senthil Kumar.P

How to run labview program in debugging mode in windows 95 version

Respected all,
I am facing probelm while running probe.vi.
I received this command "connection to acquisition board was not found" when i run labview program.
I am using labview 5.1, fieldpoint FP 1000, NI-DAQ 6.5, Field point explorer version 1.6, Measurement and Automation Explorer 1.0.1.
I would kindly request you please help me how to run my program probe.vi in debugging mode in windows 95 version, so that i can locate where error occurs.
Thanking You
Yours faithfully
M.Vijay

Respected Norbert,
Thank you very much to for your help.
Norbert : Possible reasons are e.g. wrong IDs for measurement devices. If the error is connect to the FieldPoint, it is possible that it isn't configured correctly.
I am using Field point explorer 1.6, The Field point instrument FP 1000 and RS-232 port is using. It is confirmed that the field point instrument is working properly by LED light indication test.
Norbert: It sound like you are using DAQ devices (like PCI MIO 6952E) in the application. Are you sure that you select the correct device ID for this?
I am asking you to know, If i using Labview and Fieldpoint instrument FP 1000 to monitor my parameter interms of All, Channel 0, Channel 1, Channel 2, Channel 3, Channel 4, Channel 5, Channel 6, Channel 7 for my measurement.
But now i need to solve the command connection to acquisition board was not found, The expert say this command is due to there was no AT-AO-10 Analog Output board was present in CPU.
I do not find AT-AO-10 Analog Output board in my CPU, Previously the instrument was worked perfectly by other person who assembled everthing to measure temperature.
The only aswer know send by previous person is if my task does not imply the use of a DAQ you probably have to locate where the DAQ driver is called and exclude it from the program. try to run the program in debugging mode so that you can locate where the error occurs.
I do not know how to proceed his instruction. So i would kindly request you to please help me to solve my probelm.
I also removed AT-AO-10 software from device manager >> Data Acquisition system >> AT-AO-10 just now.
I also find GPIB version 1.30, when i remove in add or remove program, it say that Error removing the GPIB.
I am eagerly waiting for your help.
Thanking You
Yours faithfully
M.vijay

HOW TO WRITE ABAP PROGRAMMING IN JAVA BY USING NETWEAVER

HI,
i am working with bapi(mean is calling bapis in my java programs).
please tell me the how to write abap programs in nwds
Thanqqqqqqqqq
Guru

Hi,
Refer the following links..
http://manuals.sybase.com/onlinebooks/group-iaw/iag0203e/iadgen2/@Generic__BookTextView/24685
and this blog
/people/kathirvel.balakrishnan2/blog/2005/07/26/remote-enable-your-rfchosttoip-to-return-host-ip-to-jco
Regards,
Uma

How to run the program in back ground with out selection screen ?

Hi,
I want to run the program in back ground but don't have selection screen. How to run this program in back ground
as program has no selection screen.
Waiting for quick response.
Best Regards,
Padhy
Moderator message: basic, please search for available information/documentation.
Edited by: Thomas Zloch on Feb 21, 2011 12:43 PM

Hi,
Go to transaction SE38 --> Execute --> Background.
If your program contains selection screen, you have to pass your input values as variants.

How to run java program from website?

Hello
I'd like to know how to run java program from my web page.
I'd like to push some button in this web page so java program that would be on my server
would pop-up. Can it be done automaticaly upon running this web site? (without any buttons - I just enter website and program pops up).
Cheers

I rather thought about RMI. But I could try servlets. So how it would look like?.
I would make http request in browser (enter address) and program would show up in its window?. And I would not have to change anything in my program?. This program would run then on both boxes?. One remotely and one not?.
But I would have to learn some basics, I've never worked with servlets. Could you suggest some good sites about it?. With ready examples so I could tweak them to my purpose.
Message was edited by:
macmacmac

How to run native program with Java program?

Hello
I've got following problem. I'd like to write file browser which would work for Linux and
Windows. Most of this program would be independent of the system but running programs not. How to run Linux program from Java program (or applet) and how to do it in Windows?.
Cheers

Try this:
Runtime rt = Runtime.getRuntime();
Process proc = rt.exec("ls -l");
InputStream stream = proc.getInputStream();
InputStreamReader isr = new InputStreamReader(stream);
BufferedReader br = new BufferedReader(isr);
String line = null;
while ( (line = br.readLine()) != null) .....
"if the program you launch produces output or expects input, ensure that you process the input and output streams" (http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html)

How to run Struts program with the help of tomcat

Hello Everybody
This is Adesh.I am a newcomer of java and facing a problem with struts, so if any one know how to set the path of struts and how to run struts program, so plz inform me.
THX in Advance.............................................

struts-config.xml
<struts-config>
<action-mappings>
     <action path = "/welcome"
                type = "Welcome"
                scope="session">
            <forward name="success" path=".welcome"/>
            <forward name="failure" path=".base.error"/>
     </action>
</action-mappings>
    <plug-in className="org.apache.struts.tiles.TilesPlugin">
        <set-property property="definitions-config" value="/WEB-INF/tiles-defs.xml"/>
        <set-property property="definitions-debug" value="1"/>
        <set-property property="definitions-parser-details" value="0"/>
        <set-property property="definitions-parser-validate" value="true"/>
    </plug-in>
</struts-config>tiles-defs.xml
<tiles-definitions>
     <definition name = ".base" path = "/include/template.jsp">
          <put name = "title" value = "${title}"/>
          <put name = "header" value = "/include/top.jsp"/>
          <put name = "body" value = "${body}"/>
          <put name = "footer" value = "/include/footer.jsp"/>
     </definition>
</tiles-definitions>web.xml
<servlet>
        <servlet-name>action</servlet-name>
        <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
        <init-param>
            <param-name>config</param-name>
            <param-value>/WEB-INF/struts-config.xml</param-value>
        </init-param>
<init-param>
            <param-name>definitions-config</param-name>
            <param-value>/WEB-INF/tiles-defs.xml</param-value>
        </init-param>
        <load-on-startup>1</load-on-startup>
    </servlet>
<servlet>
        <servlet-name>init</servlet-name>
        <servlet-class>Init</servlet-class>
        <load-on-startup>2</load-on-startup>
    </servlet>
    <servlet-mapping>
        <servlet-name>action</servlet-name>
        <url-pattern>*.do</url-pattern>
    </servlet-mapping>
<jsp-config>
    <taglib>
        <taglib-uri>/WEB-INF/struts-bean.tld</taglib-uri>
        <taglib-location>/WEB-INF/struts-bean.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/struts-html.tld</taglib-uri>
        <taglib-location>/WEB-INF/struts-html.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/struts-logic.tld</taglib-uri>
        <taglib-location>/WEB-INF/struts-logic.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/wall.tld</taglib-uri>
        <taglib-location>/WEB-INF/wall.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/c.tld</taglib-uri>
        <taglib-location>/WEB-INF/c.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/fn.tld</taglib-uri>
        <taglib-location>/WEB-INF/fn.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/fmt.tld</taglib-uri>
        <taglib-location>/WEB-INF/fmt.tld</taglib-location>
    </taglib>
</jsp-config>
    <resource-ref>
        <description>DB Connection</description>
        <res-ref-name>jdbc/SQLServerDB</res-ref-name>
        <res-type>javax.sql.DataSource</res-type>
        <res-auth>Container</res-auth>
    </resource-ref>
</web-app>This should help....

How to run Java program as Daemon Server in linux

How to run Java program as Daemon Server in linux
i would like to run the java program on system start up in a redhat linux system
can any one provide rc.status file

http://wrapper.tanukisoftware.org/

How to run java program on clients system when system strats

hi
I want to run java program on clients computer automatically when system boots up. plzzzzz help me .......

You can add the call to the java program to the auto start group (under windows).
You can't start a client program when the server starts, if that is what you mean.
Timo

How to run a program as an administrator from within a non-elevated command prompt?

I have a project that is going to be running on a kiosk, and the user that is running the kiosk software is going to be restricted. I have an alternate administrator account, but I cannot seem to figure out how to open my program running as this administrator
user. I have tried to use runas, like so:
runas /user:admin kiosk.exe
However, when I try to run this command, it asks me for the password of the administrator account and my program doesn't open correctly. It fails to open at all. If I change the run as to a start command, then the program executes fine so its
not a problem with my software.
Is there a way to pass a password parameter to runas so that it will not prompt for the password every time? If there is not, can someone think of another way for me to elevate my process to administrator without being logged in as one through the
command prompt?

Hi KevinGEAR,
You want to allow the others without the administrator`s level to run this software and meanwhile the administrator is not logged in, right?
Here is an alternative solution :
1.To work with this solution, a built-in administrator account should be enabled and meanwhile you can create a standard account. The built-in administrator account is different from the administrator account you created.
To enable built-in administrator account:
Ways to Enable / Disable the Built-In Windows 7 Admin Account
http://social.technet.microsoft.com/wiki/contents/articles/3040.enable-disable-the-local-hidden-built-in-administrator-account-in-windows-7.aspx
2. Use the following code
runas /user:ComputerName\Administrator /savecred "Full path to program's exe file"
Here is a link for reference:
Elevated Program Shortcut - Create for Standard User
http://www.sevenforums.com/tutorials/193743-elevated-program-shortcut-create-standard-user.html
NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
Best Regards

How to run ABAP programs in another client?

Similar Messages

Maybe you are looking for