How to run downloaded drivers on Fresh Install of Labview 6.1 on a Mac G4 OS 9
I have just completed a fresh install of Labview 6.1 on an Macintosh G4 running OS9. I can run it and it seems to work just fine. I downloaded some drivers for an oscilloscope (HP 546XX) to run with an HP 54603b. When I installed, I went to open the 'Get Started.VI' I get a freeze and have to force quit out of labview. I am not sure how to resolve this. I am pretty sure that it is independent of the device, since I can open the vi's at least on another computer with no hardware attached. So I guess to boil my situation down. I have 2 questions:
-How do I get a fresh install on a mac G4 OS 9 to run downloaded drivers from the internet
-How do I ensure that I have the hardware configured on
a macintosh to run properly.
I really have little experience with macs so I am not really sure what my options are or what could be the problem so any assistance would be much appreciated.
Hmmm. I wonder if NI-VISA isn't installed correctly on this machine.
When LabVIEW loads a VI that uses a VISA name control on the front panel, it queries VISA for the installed devices. Sometimes this takes a few seconds, but maybe in your case, something has been corrupted and it's hanging.
To try to narrow this down, first run the separate program "VISAConfig". This should list your devices. If this works, this means it's pretty likely that VISA is installed correctly.
Next, run LabVIEW. On an empty front panel, select the "Controls->I/O->VISA Resource Name" and place it on the front panel. When you click on the arrow on this control, you should see a list of your devices. If this works, then that indicates that LabVIEW is successfully talking
to the VISA software.
If both of those succeeded, then we have to take a closer look at this particular instrument driver. Can you drop other VIs (say, Initialize or Close) without hanging?
If either of the first two steps fail, I'd suggest that you reinstall the VISA software. You may want to try the latest version of NI-VISA (from ni.com), but first confirm that it supports LabVIEW 6.1.
I hope this helps.
Brian
Similar Messages
-
how do i download 10.9 or 10.8 if i have a 2008 mac book pro running 10.5.8
I might also add your signature is not in congruence with your post. Do you have 10.8.5, or 10.5.8. 10.8.5 is a free update to 10.9. 10.5.8, you must buy 10.6, download the free 10.6.8 combo to get to 10.8 or 10.9 via the App Store.
The sequence of the numbers matters greatly.
Per my prior post
10.5.8 < 10.6< 10.6.8 < 10.7 < 10.8 < 10.8.5 < 10.9
People just wanting 10.7 from 10.5.8 can purchase either 10.6 on CD, download 10.6.6 combo, and use the App Store to upgrade to 10.7. They can also purchase the 10.7 USB Flash drive if it can be found, and install it on an external drive, and import the data over once they are ready to run 10.7.
The key is knowing your software and driver compatibility. -
How could i download drivers for imac mc814 for windows 7 ? and from where ?
how could i download drivers for imac mc814 for windows 7 ? and from where ?
If you are trying to run MS Windows in Boot Camp then please post in the correct forum, the Boot Camp forum. That is where the Windows guys hang out.
-
How to Get HP Drivers After (DIY) Installing Windows?
Series: How to Re-Install Windows when you don't have the Recovery Discs
Intro: What is an ISO? Why is it used?
Step 1 - Get the ISO - ISO Download Links
Step 2 - Burn the ISO to a DVD or USB
Step 3 - What to do with the ISO DVD/USB? Change the Boot Order
Step 4 - What to do After Windows is Installed? How to Get HP Drivers?
Step 4 - What to do After Windows is Installed? How to get HP Driver?
Winodws is Installed, Now What?
Once the installation is complete, you'll need to go to your HP Driver Page and download all of your drivers. Your wireless function may not work automatically with a fresh install. You may have to plug an Ethernet cable into the computer and into your router to connect to the internet initially, until you have downloaded your wireless driver.
The best way to use the HP Driver Page, is by putting in your product number ('P/N' found on the HP label on the bottom of the computer) and click Go, rather than the 'Detect my product - Find Now' option. Without an HP Recovery Disc version of Windows, the 'Detect my product' option is not likely to work properly.
Another important note: If you had to go all the way into BIOS and change the Boot Order to the DVD drive (or USB), you'll have to go back into BIOS at your convenience and change the Boot Order back to booting from the internal Hard Drive first. If you used the F9 Boot Order Menu, it only changes the Boot Order temporarily, for that one power on iteration.
If you have any questions, create a new post (How to Create a New Post - Video), copy and paste it's link into a private message to me, and I will respond on your threadNote down all the file names of the following queries first:
SELECT NAME FROM V$DATAFILE;
SELECT NAME FROM V$CONTROLFILE
SELECT NAME FROM V$TEMPFILE
SELECT VALUE FROM V$PARAMETER WHERE NAME = 'spfile'
If the last query doesn't show any file then copy $ORACLE_HOME/dbs/init<SID>.ora file.
After making the list in sqlplus issue:
SHUTDOWN IMMEDIATE
And now you can copy all of those files to some other location. Make sure you install same version of OS and Oracle to restore these files. It would be easy for you if you keep the same directory structure after reinstall and place all those files as they were earlier.
Daljit Singh -
Windows 8.1 Professional x64: Windows will not run Windows Update after fresh install
Greetings everyone. I'm having a strange issue that I can't seem to figure out. I'm developing an image with the following specs:
Hardware:
Dell XPS 12 Ultrabook Convertible
Haswell i7
8 GB RAM
256 SSD HD
Software:
Windows 8.1 Professional x64
Problem description:
After formatting and partitioning the hard drive (UEFI) with a corporate copy of Windows 8.1 x64, the laptop is booted up in Audit mode. No OEM drivers or software is installed. Windows is then activated to the KMS server and verified.
I then connect to a hotspot (no proxy required) and open up IE 11. I click tools and select Windows Update. The laptop then searches and searches for updates and never finds any. I've let it search for over 10 hours. The laptop never
returns an error message.
Troubleshooting performed:
1. I've tried different copies of Windows 8.1 - same result.
2. I've tried installing the OS with different types of media (external hd and multiple bootable USB drives) - same result.
3. I've disable the Windows Update service, deleted the contents of the SoftwareDistribution folder, restarted the Windows Update service and rebooted laptop - same result
4. I've installed this copy of Windows 8.1 on different models of laptops with no OEM drivers or software installed - same result.
5. I've installed all of the OEM device drivers in the correct order and ensured that the device manager is clear of bang signs - same result.
6. Date and time is set correctly.
Has anyone else experienced this with Windows 8.1 x64? If I take a copy of Windows 7 x64 or 8 x64 and install it on this laptop, it updates Windows without any issues. The problem seems to be with Windows 8.1.
Thank you in advance for any help you can provide.2014-03-04 13:49:52:826
888 9f8
Misc =========== Logging initialized (build: 7.9.9600.16403, tz: -0800) ===========
2014-03-04 13:49:52:826
888 9f8
Misc = Process: C:\Windows\system32\svchost.exe
2014-03-04 13:49:52:826
888 9f8
Misc = Module: c:\windows\system32\wuaueng.dll
2014-03-04 13:49:52:826
888 9f8
Service *************
2014-03-04 13:49:52:826
888 9f8
Service ** START ** Service: Service startup
2014-03-04 13:49:52:826
888 9f8
Service *********
2014-03-04 13:49:52:842
888 9f8
Agent * WU client version 7.9.9600.16403
2014-03-04 13:49:52:842
888 9f8
Agent * Base directory: C:\Windows\SoftwareDistribution
2014-03-04 13:49:52:842
888 9f8
Agent * Access type: No proxy
2014-03-04 13:49:52:842
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 13:49:52:842
888 9f8
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-03-04 13:49:52:842
888 9f8
Agent * Network state: Connected
2014-03-04 13:49:52:858
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 13:49:52:858
888 9f8
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-03-04 13:49:53:045
888 9f8
DtaStor Default service for AU is {00000000-0000-0000-0000-000000000000}
2014-03-04 13:49:53:045
888 9f8
DtaStor Default service for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-03-04 13:49:53:045
888 9f8
DtaStor Data store successfully created
2014-03-04 13:49:53:061
888 9f8
Agent *********** Agent: Initializing global settings cache ***********
2014-03-04 13:49:53:061
888 9f8
Agent * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2014-03-04 13:49:53:061
888 9f8
Agent * WSUS server: <NULL>
2014-03-04 13:49:53:061
888 9f8
Agent * WSUS status server: <NULL>
2014-03-04 13:49:53:061
888 9f8
Agent * Target group: (Unassigned Computers)
2014-03-04 13:49:53:061
888 9f8
Agent * Windows Update access disabled: No
2014-03-04 13:49:53:076
888 9f8
WuTask WuTaskManager delay initialize completed successfully..
2014-03-04 13:49:53:076
888 9f8
Report CWERReporter::Init succeeded
2014-03-04 13:49:53:076
888 9f8
Agent *********** Agent: Initializing Windows Update Agent ***********
2014-03-04 13:49:53:076
888 9f8
DnldMgr Download manager restoring 0 downloads
2014-03-04 13:49:53:092
888 9f8
AU ########### AU: Initializing Automatic Updates ###########
2014-03-04 13:49:53:092
888 9f8
AU AIR Mode is enabled
2014-03-04 13:49:53:092
888 9f8
AU # AU is not configured yet
2014-03-04 13:49:53:092
888 9f8
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-03-04 13:49:53:092
888 9f8
AU # Accelerated install is required
2014-03-04 13:49:53:092
888 9f8
Agent Switching to hardware-verified ClientId.
2014-03-04 13:49:53:092
888 9f8
AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80070490
2014-03-04 13:49:53:108
888 9f8
AU AU finished delayed initialization
2014-03-04 13:49:53:108
888 8c4
IdleTmr Incremented idle timer priority operation counter to 1
2014-03-04 13:49:53:108
888 13c
DnldMgr Asking handlers to reconcile their sandboxes
2014-03-04 13:49:57:239
888 af8
AU ########### AU: Setting new AU options ###########
2014-03-04 13:49:57:239
888 af8
AU Setting AU Approval Type to 4
2014-03-04 13:49:57:239
888 af8
AU # Policy changed, AU refresh required = Yes
2014-03-04 13:49:57:239
888 af8
AU # Approval type: Scheduled (User preference)
2014-03-04 13:49:57:239
888 af8
AU # Auto-install minor updates: Yes (User preference)
2014-03-04 13:49:57:239
888 af8
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-03-04 13:49:57:239
888 af8
AU # Accelerated install is required
2014-03-04 13:49:57:239
888 af8
AU AU Refresh required....
2014-03-04 13:49:57:239
888 af8
AU AU setting next detection timeout to 2014-03-04 21:49:57
2014-03-04 13:49:57:239
888 af8
AU AIR Mode is enabled
2014-03-04 13:49:57:239
888 af8
AU AIR Mode is disabled
2014-03-04 13:49:57:239
888 af8
AU Accelerate Install required state reset
2014-03-04 13:49:57:239
888 af8
AU Triggering Online detection (interactive)
2014-03-04 13:49:57:239
888 9f8
AU Windows OOBE is still in progress. AU deferring detection
2014-03-04 13:49:57:239
888 9f8
AU WARNING: BeginDetection failed, hr:0x8024a008
2014-03-04 13:49:57:239
888 9f8
AU All AU searches complete.
2014-03-04 13:49:57:239
888 9f8
AU # WARNING: Failed to find updates with error code 8024a008
2014-03-04 13:49:57:239
888 9f8
AU AU setting next detection timeout to 2014-03-04 22:19:57
2014-03-04 13:49:57:239
888 9f8
AU OOBE is in progress, so cannot perform Accelerated Install
2014-03-04 13:53:34:838
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 13:53:34:838
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 3.
2014-03-04 13:54:16:402
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 13:54:16:417
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 13:58:48:942
888 6d4
IdleTmr Decremented idle timer priority operation counter to 0
2014-03-04 13:58:56:990
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 3.
2014-03-04 13:58:57:022
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 13:58:57:272
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 13:58:58:830
888 9f8
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 2.
2014-03-04 13:58:58:846
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 13:58:58:877
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 3.
2014-03-04 13:58:58:892
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 13:58:59:267
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 13:59:01:937
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 13:59:01:937
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 3.
2014-03-04 13:59:01:953
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 14:08:49:957
888 9f8
AU ########### AU: Uninitializing Automatic Updates ###########
2014-03-04 14:08:50:007
888 9f8
WuTask Uninit WU Task Manager
2014-03-04 14:08:50:219
888 9f8
Service *********
2014-03-04 14:08:50:219
888 9f8
Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-03-04 14:08:50:219
888 9f8
Service *************
2014-03-04 14:13:11:111
888 ba4
Misc =========== Logging initialized (build: 7.9.9600.16403, tz: -0800) ===========
2014-03-04 14:13:11:111
888 ba4
Misc = Process: C:\Windows\system32\svchost.exe
2014-03-04 14:13:11:111
888 ba4
Misc = Module: c:\windows\system32\wuaueng.dll
2014-03-04 14:13:11:111
888 ba4
Service *************
2014-03-04 14:13:11:111
888 ba4
Service ** START ** Service: Service startup
2014-03-04 14:13:11:111
888 ba4
Service *********
2014-03-04 14:13:11:126
888 ba4
Agent * WU client version 7.9.9600.16403
2014-03-04 14:13:11:126
888 ba4
Agent * Base directory: C:\Windows\SoftwareDistribution
2014-03-04 14:13:11:126
888 ba4
Agent * Access type: No proxy
2014-03-04 14:13:11:126
888 ba4
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 14:13:11:126
888 ba4
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-03-04 14:13:11:126
888 ba4
Agent * Network state: Connected
2014-03-04 14:13:11:126
888 ba4
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 14:13:11:126
888 ba4
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-03-04 14:13:11:142
888 ba4
Agent *********** Agent: Initializing global settings cache ***********
2014-03-04 14:13:11:142
888 ba4
Agent * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2014-03-04 14:13:11:142
888 ba4
Agent * WSUS server: <NULL>
2014-03-04 14:13:11:142
888 ba4
Agent * WSUS status server: <NULL>
2014-03-04 14:13:11:142
888 ba4
Agent * Target group: (Unassigned Computers)
2014-03-04 14:13:11:142
888 ba4
Agent * Windows Update access disabled: No
2014-03-04 14:13:11:142
888 ba4
WuTask WuTaskManager delay initialize completed successfully..
2014-03-04 14:13:11:142
888 ba4
Report CWERReporter::Init succeeded
2014-03-04 14:13:11:142
888 ba4
Agent *********** Agent: Initializing Windows Update Agent ***********
2014-03-04 14:13:11:142
888 ba4
DnldMgr Download manager restoring 0 downloads
2014-03-04 14:13:11:142
888 ba4
AU ########### AU: Initializing Automatic Updates ###########
2014-03-04 14:13:11:142
888 ba4
AU AIR Mode is disabled
2014-03-04 14:13:11:142
888 ba4
AU # Approval type: Scheduled (User preference)
2014-03-04 14:13:11:142
888 ba4
AU # Auto-install minor updates: Yes (User preference)
2014-03-04 14:13:11:142
888 ba4
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-03-04 14:13:11:142
888 ba4
Agent Switching to hardware-verified ClientId.
2014-03-04 14:13:11:142
888 ba4
AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80070490
2014-03-04 14:13:11:158
888 ba4
AU AU finished delayed initialization
2014-03-04 14:13:11:158
888 ba4
AU OOBE is in progress, so cannot perform Accelerated Install
2014-03-04 14:13:11:158
888 764
IdleTmr Incremented idle timer priority operation counter to 1
2014-03-04 14:13:11:158
888 10c
DnldMgr Asking handlers to reconcile their sandboxes
2014-03-04 14:13:13:353
888 764
AU Triggering AU detection through DetectNow API
2014-03-04 14:13:13:353
888 764
AU Triggering Online detection (interactive)
2014-03-04 14:13:13:353
888 ba4
AU Windows OOBE is still in progress. AU deferring detection
2014-03-04 14:13:13:353
888 ba4
AU WARNING: BeginDetection failed, hr:0x8024a008
2014-03-04 14:13:13:353
888 ba4
AU All AU searches complete.
2014-03-04 14:13:13:353
888 ba4
AU # WARNING: Failed to find updates with error code 8024a008
2014-03-04 14:13:13:353
888 ba4
AU AU setting next detection timeout to 2014-03-04 22:43:13
2014-03-04 14:13:13:353
888 ba4
AU OOBE is in progress, so cannot perform Accelerated Install
2014-03-04 14:43:13:405
888 ba4
AU Windows OOBE is still in progress. AU deferring detection
2014-03-04 14:43:13:405
888 ba4
AU WARNING: BeginDetection failed, hr:0x8024a008
2014-03-04 14:43:13:405
888 ba4
AU All AU searches complete.
2014-03-04 14:43:13:405
888 ba4
AU # WARNING: Failed to find updates with error code 8024a008
2014-03-04 14:43:13:405
888 ba4
AU AU setting next detection timeout to 2014-03-04 23:13:13
2014-03-04 14:43:13:405
888 ba4
AU OOBE is in progress, so cannot perform Accelerated Install
2014-03-04 14:47:37:066
888 764
IdleTmr Decremented idle timer priority operation counter to 0 -
How can I download second time after install
I installed Lion (not doing the dvd copy) and all works fine. How do I download again to make the dvd copy ?
I want to install it on a macbook that is on a non-cable connected link (very slow connection).
I can see it int eh Puchased list - Installed. Do I have to buy it again ?Found it, the cmd (alt) key on the purchased icon....
-
How do I download pictures from my photo streams in iCloud to my computer so that I can delete the photo streams to save space on my iPhone but still save the pictures? My computer is a Dell running Windows 8.1?
Hi smdahl85,
Pictures in My Photo Stream can be brought into your Windows computer using the steps in this article -
My Photo Stream FAQ - Apple Support
Specifically the section titled How do I view photos in My Photo Stream?
Thanks for using Apple Support Communities.
Best,
Brett L -
How to run RSWF_CATID in XI post install
Hello,
I am in step for SAP XI customizin gin installation guide. I could not able to run
RSWF_CATID in se38. Can anybosy has idea how to run this and what is the purpose of it.
Thanks,
SrinivasHi Sri,
Login to system with <b>SAP_ALL</b> rights.
Go to Se 38 and run the RSWF_CATID & On the selection screen select the options ABAP Classes & XML object types & execute the report.
After this step you have to perfrom the import of Exchange_Profile in XI.
Regards,
Sarvesh -
Fresh install leaves locked folder at top level (Mac OS X Install Data)
I jsut did a fresh install. wanted to use my SL DVD but the MBP i5 refused to star with it so I used the original DVD (10.5) and upgraded with the SL DVD to 10.6. However after the initial SL Installation, it tried from the SL DVD and this failed. I did a manual restart, starting from the HD and everything ran fine. however today I note there is a locked file on the HD named Mac OS X Install Data. It contains 181 .pkg files.
Now I suppose this should have been moved or deleted as part of the install process.
Does anybody have an idea if this is indeed a install failure? Can I move them to a file where they belong? Could it be my install DVD is funked? Or any other suggestions?Remains the quesion if one can remove the aformentioned folder.
I believe the folder is part of the 'preinstall' for Snow Leopard -- it should contain items the installer creates on the hard drive before the Mac automatically restarts from the DVD to complete the installation. It should only contain items referenced by the installer & should have been deleted at the end of a successful install.
Without knowing exactly what you installed over what (still not quite sure about that) I can only guess, but if everything is running fine, there should be no issues if you remove it.
Alternately, you could just run the installer again, making sure you used the one that came with that MBP. -
How do i download all the information onto a seagate go flex slim for mac
how do i download all the information onto a seagate go flex slim for mac
Sailordog wrote:
Any suggestions on how to properly format and drag into this lttle guy would be great.
1. go into FINDER at top then PREFERENCES then GENERAL tab
then check "hard disks" and "external disks"
THIS WILL PUT A HD ICON ON YOUR DESKTOP YOU CAN OPEN AND DRAG AND DROP FILES TO
Your new HD needs to be formatted for use on your Mac, so:
2. TO FORMAT THE HD:
Applications > utilities > disk utility
go to DISK UTILITY and verify what it says your HD is formatted as under the "ERASE" tab
see from mine below, HD on left selected, .......ERASE tab highlighted.... and middle right roughly, it says "MAC OSX EXTENDED JOURNALED"
thats the format, but yours may be different of course
bottom right ERASE tab lets you erase/ FORMAT your external (remember this erases all data ON THE HD!)
Format/erase it as: "MAC OSX EXTENDED JOURNALED"
highlighted in RED Erase.......format (middle) ...........erase ACTION to Erase/Format (bottom)
Now you can drag and drop files -
How to run Java 3D Applet without install java3d
I've written a java3d applet, and it runs correctly in browser on my computer. Now I want it can be run on other computers which havent' Java3d installed. If the program runs as application, then we can use jnlp and web-start to solve this problem. But what about applet? How can I do it just like the application?
Pls help me!Hello. I read this article too. It sounds interesting but I have some questions. The example is given for win32 and what about other OSs and platforms? Sun provides different libraries for different OS. According to this article it is possible to run applets without previous installation of Java3D and if a user runs Windows 2000, Java3D libraries will be downloaded and installed from the location pointed out by the programmer. But how to do this for all OSs and all platforms and architectures so that if a user doesn't have Java3D installed on his/her computer, might to see the applet in his/her browser? Is it the only way that a programmer needs to include into "loader_singed.jar" all possible libraries for all possible platforms?
-
How do I download Yosemite once and install on multiple Macs?
I have a slow Internet connection and it will take many hours to download Yosemite. I would like to download the install file(s) once, copy it(them) to the other Macs in my network, and then do the installs. How can this be accomplished?
Here is a write up on doing that with the last OS X version, I'm sure it works the same...
Copying the Mavericks installer onto other Macs: Alternatively, once you’ve downloaded the Mavericks installer to one computer, you can copy it—over your local network or by using a flash drive, external hard drive, or other media—to your other Macs. This is obviously a much faster approach than re-downloading the 5.3GB installer to each computer. You won’t even be prompted to authorize the installer on each Mac, as you are with other Mac App Store-distributed software—the Mavericks installer does not use digital-rights management (DRM). -
How do I download 9.5 to install on a Mac with a slow Internet connection?
Prior to Mavericks and the latest iLife apps, I was able to download installers from Apple support to install on an eligible Mac that has a slow (and tolled by usage) Internet connection. The new App store downloads and installs in one step such that it only leaves behind the installed app (not the installer image). Suggestions?
Welcome to Apple Support Communities
Mac App Store applications don't need an installer. In the case of iLife applications, you can just transfer the iPhoto, iMovie or GarageBand application to another Mac by transferring the application from the Applications folder, and you will get the applications updated on your Mac.
If you haven't got another Mac with a fast Internet connection, you can only download the iLife applications with the slow connection -
How can i download Lightroom 5 and instal into win 7
They do not allow download after 10 times and load the trial version it can not instal also adobe provide no email to help on this matter what company is this
if you follow the step in the paragraph above the link, you can download a trial via one of the links on this page using a browser that accepts cookies: http://prodesigntools.com/lightroom-5-ddl-comparison-vs-lr4.html
and activate with your serial number. -
How do i download acrobat X to install on a second computer
I have paid for and downloaded one copy of acrobat X, how do I do this on another computer. All the downloads seem to point to acrobat xi, but I dont want to upgrade.
Hi gtms2013
Download Acrobat X Trial from below link and Use the Serial Number to Activate it ...
http://prodesigntools.com/adobe-acrobat-x-10-pro-reader-suite-direct-download-links-ddl.ht ml
Or
http://prodesigntools.com/adobe-cs6-direct-download-links.html
Maybe you are looking for
-
How to Display Multiple Rows in Business Logic Editor
Hi Friends, I took the standard BAPI: BAPI_MATERIAL_GETLIST and followed the SAP- xMII documentation. It is not showing any records. Does any one have good example. Please let me know. If I run the same BAPI from R3 system, it is showing 7 records.
-
Creating dynamic EntityObject, ViewObject and wire them to UI components
hi experts, Good morning to all :) here i h'd a problem in real time (while on customization). My problem: goes here Re-drawing UI ok.i through this link http://jobinesh.blogspot.in/2010/06/model-driven-approach-for-building.html jobinesh project is
-
Join between SO and AR tables in Oracle Apps 11.0.3
Hello, I am new to Order Management. Can anyone please suggest join between SO Tables and Receivables tables in Oracle Apps version 11.0.3. I am working on an Invoicing error during Autoinvoice Import Program and I am doing workaround on this issue.
-
I am trying to download an internal table with WS_DOWNLOAD. With one table (others work) the data I am getting is garbled in some fields (see below) {{{{{ b|{{{{{{S,{{{{{ \ The only difference I can find with the tables is that the
-
Hi, I have a lot's of problem with the defined ws systems. The origin is that, as I understood, I have to define a WebService System each time I update the webservice definition else VC don't see the modifications. Actually, I have today multiple sys