Define WebService System

Hi,
I have a lot's of problem with the defined ws systems.
The origin is that, as I understood, I have to define a WebService System each time I update the webservice definition else VC don't see the modifications.
Actually, I have today multiple systems pointing to the same webservice. (I tried to delete them in portal System Administration/System Configuration/Content/Visual Composer but I wonder if I didn't break something !?)
Could you help me to delete thoses systems and maybe explain me how to force VC to read the wsdl definition if updated ?
thanks a lot,
Thomas.

Hi Thomas,
If you are using EP6 or later, there is a way of clearing the PCD cache (which includes cached metadata from RFC, JDBC or web service connections).
If you navigate to System Administration > Support > Portal Content Directory > PCD Administration, you will see a screen which allows you to either remove specific objects from the cache, or to flush the entire PCD cache.
If you then close all Internet Explorer windows and log into VC again, you should see the updated WSDL.
This is also mentioned in SAP Note 868887.
Regards,
Sascha

Similar Messages

Why Define WebService system occur error in VC7.0?

i used SDN How-to document <Creation of VC Model Using Exchange Rate Web Service>.
iVC7.0>tools->define web services), i use webservices URL :http://www.webservicex.net/CurrencyConvertor.asmx/WSDL
but VC7.0 System display Failure.
error info: Invalid web service URL .
how to solve this problem,pls help me.3ks.

Hi,
the WSDL file is not accessible; try this one:
http://www.webservicex.net/CurrencyConvertor.asmx?WSDL
should work now.
best regards,
Andreas

BPM: How to capture Webservice system Time

Dear friends,
I have one Sybchrounous Interface as follows :
Local PI folder -
>PI -
> Webservice system
                             ( Sync Interface )
Overall flow:
1.        PI Picks up the Control file consisting of date& time, count and start fields from PI folder.
2.        PI mapping converts the file to soap request message and sends it to Web Service
3.        PI receives the response soap message from web service converts into an XML file and places in the PI folder.
4.        The loop continues in PI BPM until all the records of particular time period are retrieved.
Logic in Detail:
5.     The initial request file consists of a user defined time stamp (since), count and start values to retrieve the initial load.
6.     PI BPM sends this request in a synchronous mode to Web service and gets the response back.
7.     Apart from the device details, the response message from WS consists of u2018current_timeu2019 field which is the current system time of webservice when the query is executed on the web service System.
8.     BPM has to capture this field during first iteration and updates the source request message field u2018sinceu2019 with the web      service system time.
9.      From next cycle, PI picks up the file which consists of WB service system time in the u2018sinceu2019 field.
10   BPM continues in loop until all the records are fetched from web service and writes the files with time stamp concatenated to the PI folder.
Bottlenecks:
Tried to implement with BPM ..But facing problems to implement point 4 ,8 and 10 .
Kindly guide me how we can design this interface .
Renu.

Dear friends,
I have one Sybchrounous Interface as follows :
Local PI folder -
>PI -
> Webservice system
                             ( Sync Interface )
Overall flow:
1.        PI Picks up the Control file consisting of date& time, count and start fields from PI folder.
2.        PI mapping converts the file to soap request message and sends it to Web Service
3.        PI receives the response soap message from web service converts into an XML file and places in the PI folder.
4.        The loop continues in PI BPM until all the records of particular time period are retrieved.
Logic in Detail:
5.     The initial request file consists of a user defined time stamp (since), count and start values to retrieve the initial load.
6.     PI BPM sends this request in a synchronous mode to Web service and gets the response back.
7.     Apart from the device details, the response message from WS consists of u2018current_timeu2019 field which is the current system time of webservice when the query is executed on the web service System.
8.     BPM has to capture this field during first iteration and updates the source request message field u2018sinceu2019 with the web      service system time.
9.      From next cycle, PI picks up the file which consists of WB service system time in the u2018sinceu2019 field.
10   BPM continues in loop until all the records are fetched from web service and writes the files with time stamp concatenated to the PI folder.
Bottlenecks:
Tried to implement with BPM ..But facing problems to implement point 4 ,8 and 10 .
Kindly guide me how we can design this interface .
Renu.

Webservice system error in visual composer

Hi,
I am facing a problem with respect to using a webservice in my Visual Composer application. I have defined the webservice system with a WSDL url in the visual administrator giving the required login credentials. I am trying to access the entire function group that contains some BAPI's. When i access this system in my Visual Composer, i can see the entire list of BAPI's that it contains converted as web services. But, when i try to drag any of the BAPI's i get the following error
Failed to fetch Metadata.
Portal Request failed due to: Operation
not found.
Now when i put the same WSDL in my browser, the list of services can be clearly seen. Any solutions to this?

Hi Mario,
The problem is solved now. We cannot drag a webservice system directly into a layer in VC but first needs to be dragged on to your story board and from there into the desired layer!!! I am not sure why this occurs but my colleague here found this out. But now i get the error Portal Request Failed (Could not execute web service operation). i checked the following link
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/portalRequestFailed&
The BAPI that iam testing as a webservice has one fo the input in the form of a object, to be specifc a HROBJECT whose structure contains 3 components. Can this be the cause of the problem?
Thanks and Regards,
Arun EV

When trying to add Webservice System in VC I get an Invalid URL Error

Hello,
I want to use an webservice in VC. This ws originaly was BAPI_FLIGHT_GETDETAIL. I created the ws out of it and in wsconfig got the green light. Now, if i browse the corresponding system in VC the service doesn't show up. I think this is because it isn't published in the UDDI through WSADMIN. However, the system has no UDDI (I think so because there are no UDDIs showing up in the list). Now I wanted to define an new Webservice system. And here the problem is showing up. I use the follwing URL:
http://192.168.123:8000/sap/bc/srt/rfc/sap/ws_flight_getdetail?WSDL
If I type the URL into my Browser I get the WSDL -> The URL exists. But If I use the same URL in VC I get an "Invallid URL"-error. And this is making me kind of crazy..
Can anyone give me help about this problem?
Greetings, Marco

Hi,
copy/pasted form another similar thread :
"The main reason for your problem is Configuration settings for your portal Server.
some URLs will not be allowed in every Portal.
To avoid this problem you have to do the Proxy settings in Visual administrator .
see the SAP Note :1144698."
Invalid Wsdl ?
And also : https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/webServiceInvalid+URL
Hope this helps !
Fabien.

Defining Logical System name for ALE using T.C- SPRO?

Hi,
Can anybody tell, how to define logical system name using T.C SPRO?
Where can I find the "Define Logical System for ALE"?
Thanks
Balaji

HI,
Use the SALE transaction , there you can have all steps clearly,
please see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
Regards
Chilla..

Define Logical Systems and Template Names for BW Reports

Hi experts
I would like to know if someone used the mentioned functionality 'Define Logical Systems and Template Names for BW Reports, I would like to know too IF I create a Z REPORT for example in webdynpro and insert it in this configuration it will work and where it will appear in sourcing cockpit?
sds.
Javier

Hello Muthu,
BW reports will be shown in SRM Box if the corresponding BW roles for SRM are integrated with SRM roles.
You might to activate the corresponding datasource of this in SRM.
And since you have to connect the source system to BW, I think you have to define SRM system as logical system in BW.
Regards,
Pavan

Unable to create webservice system!!!

Hi Friends,
I am using SAP NetWeaver 2004s Visual Composer SP 08.
My problem is, No matter whatever WSDL url i give to create the WebService System in the VC its throwing me the error 'Invalid Web Service URL: http://ws.invesbot.com/stockquotes.asmx?WSDL'
I have given as below:
New System name : invesbot
New System alias: invesbot
Web Service URL: http://ws.invesbot.com/stockquotes.asmx?WSDL
I am really clueless to know whats wrong in the WSDL URL. When i give the above WSDL url on the browser it shows the XML details.
Is there anything else i should do for the Web Service URL?????
Thanks,
Raghavendra P

Hi Raghavendra,
I tried to create webservice using the URL you've given and it worked on my system (fyi: I am using sneak preview)
Just for counter checking, can u able to try creating webservice for the following URL?. This is an example provided in the VC help docs.
http://www.webservicex.net/CurrencyConvertor.asmx?WSDL
Name the system CurrencyConverter and give it the alias Converter
Thanks
Sathish

MSS - Appraisal - No user mapping defined for system SAP_ECC_HumanResources

Hi Experts,
We are using MSS for appraisal. When we click on Maintain Performance Documents link on MSS, we gets Status Overview for employees. After that when we click on In Preparation point, it gives following error.
No user mapping defined for system SAP_ECC_HumanResources
It asks for User name and Password. When we enter user name and password, it gives following message.
Session Management will not work!
Please check the DMS log file for details.
You can turn off this alert inside"Support Destk"->'SAP Application' and after that screen gets error - Internet Explorer cannot display the webpage
Would appreciate kind guidance on this. We are on EP 7.0 and ECC 6.0. We are using single-sign on.
Thanks in advance.
Aashish

Hi Experts,
We are using MSS for appraisal. When we click on Maintain Performance Documents link on MSS, we gets Status Overview for employees. After that when we click on In Preparation point, it gives following error.
Session Management will not work!
Please check the DMS log file for details.
You can turn off this alert inside"Support Destk"->'SAP Application' and after that screen gets error - Internet Explorer cannot display the webpage
Would appreciate kind guidance on this. We are on EP 7.0 and ECC 6.0. We are using single-sign on.
Thanks in advance.
Aashish
Edited by: Aashish Brahmbhatt on Sep 8, 2008 8:51 PM

Define logical system

Hi Gurus,
I installed BI7, and want to be define logical system for creating client. I login from default user sap*/DDIC, IMG, transaction SALE), choose Bisic Setting-> Logical Systems->® Define Logical System; I received message can not create for this user, only display.
Please help me, how I can create logical system?
Thanks
Shahid

in which client have you tried creating logical system by using SAP* and DDIC
First create BASIS userid in that client and do the changes in SCC4 and SE06. Then define logical system for your client in the format <SID><CLNT><Clint NO.>
Hope this would help you.

No Exception Defined for System Errors

hi,
I am capturing system messages through an Exception error handler in the block step of Integration Processes.
Its a IDOC -> XI -> HTTP Receiver scenario.
When i execute the scenario, i see an error in the workflow in the Block Step. It shows an Error which says "No Exception Defined for System Errors", though i have a Exception Branch in the Block step.
Any clues why i am not able to capture the Exception errors and send it through email.
Its failing at the Block step.
More details on the scenario:
1. Start
2. Receive Step - Asynch - IDOC
3. Block Step - with Exception name as "TimeOut"
3.1 Exception Branch with exception handler as "Timeout"
3.1.1 - Transform Step - to transform a Exception message(with just one field) to "Error" message (with 5 fields)
3.1.2 - Send Step - send the "Error" message through email
3.2 Deadline branch set to 1 minute
3.3 Switch step
3.3.1 Transformation step - to transform the IDOC to XML
3.3.2 Send step - Synch - request xml and response xml defined in this step
4. Switch Step
4.1 - Transform step - transforms the idoc and xml response to the actual error
4.2 - Send Step - sends the actual error to the email message using MAIL adapter.
Any tips would be grateful.
Thanks,
Tirumal

Stefan -
In step 3.3.2
I did find the property exceptions and assigned the exception branch in the block and ran the scenario, now i get an error saying that : "Exception Timeout Occurred."
I went through the Technical Details of the workflow and the error displayed there is "Exception 'Timeout' caught and transferred to the exception handler'.
In step 3.1.1
I get an error saying "No Payload found'.
Does this mean its not able to capture the message text.
Thanks in advance,
Tirumal

User defined coordinate system

Hi,
I'm trying to create a new user defined coordinate system on Oracle 10.2.
This coordinate system is a local one. But I would transform between this local one and Gauss-Krueger Zone 2 (EPSG:31466). For this I have the information for the affine transformation (local --> EPSG:31466 and reverse, too).
How can I create a projected coordinate system with these information?
Has anybody an idea or has had a similar problem?

Hi,
I'm trying to create a new user defined coordinate system on Oracle 10.2.
This coordinate system is a local one. But I would transform between this local one and Gauss-Krueger Zone 2 (EPSG:31466). For this I have the information for the affine transformation (local --> EPSG:31466 and reverse, too).
How can I create a projected coordinate system with these information?
Has anybody an idea or has had a similar problem?

Defining webservice?

Hi All,
Currently i'm working on Webservice->XI->RFC scenario and while defining webservice in ID we define provide values for the following URL.
http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel
my question is wht are the values do we need to provide for Host & Port and from where i can get values for these fields?
Regards
Sami

Hey,
these are the steps for defining and deployinh web service.
these are the steps in your NDS
Step 1)
 Goto Windows->Open Perspective->J2EE development.
Step 2)
 Goto File->new->Ejb module(give project name).
Step 3)
 Right Click on the <project name> eg. work_ejb select new->Ejb.
Step 4)
 Give an appropriate EJB name and default package (eg. com.xxx.yyy).
 Also select stateless Ejb.
 Click next then next and then next.
Step 5)
 Add method with an appropriate name.
 Mention the return type and also assign the required parameters.
 Logic is written in the EJB module bean.
Step 6)
 Right click on the <project name> and build.
 Creates .jar
Step 7)
 Goto File->new->Enterprise Application project(to create EAR)
Step 8)
 Give project name, assign EJB and build.
 Creates EAR.
Step 9)
 Right Click on the EJB.
 Goto new->Web services.
 Specify name of the web service.
 Specify EAR in the WEB service.
Step 10)
 Build EAR.
 Build Ejb.
Step 11)
 Goto Windows->Prefrences->SAP j2EE engine.
 Give the message server host name.
Step 12)
 Right Click on EAR and deploy.
Step 13)
 Goto-> http://<host name>:<port no.>/index.(of your WAS on which you have deployed web service)
Step 14)
 Choose the web service name,test it and download it(default WSDL).(This will include the entire URL including the host name and port)
Step 15)
 Import port(WSDL) in External definition of SAP PI.
reward points if useful.
regards,
 Milan

Unable to Define Business System in SLD.

Hi All,
We configured SLD host on EPDEV system (EP System based on Only Web as Java).
We have diffrent system for PI. At the time of PI installation I mentioned SLD Host as EP system.
In PI am facing some problem while executing SLDCHECK, output as "No Business System defined for PI Technical system"
In EP SLD HOST, By using wizard I am trying to add PI as a technical system, In in first step, I selected Web as ABAP, after that next two steps its ok, In Installed product step, I added installed pucts and saved then it giving me error of "CIM_ERROR_ALREADY_EXISTS".
Then I canceled the wizard and came on main screen, I found two technical systems for PI SID as below.
1. PI Web as ABAP
2. PI Web as Java
I checked the installed products for both PI Technical Systems then I found,
1. PI Web as ABAP there is no installed product and when I tried to add new Installed product then itu2019s again showing the same CIM_ERROR.
2. PI Web as Java its showing all installed products for Java, so I am able to create business system for this technical system.
But I am unable to create busyness system for PI Web as ABAP system because no installed products in the list.
So can you please tell me how to resolve this problem. I tried to delete all PI technical systems and recreate ones again. It gets delete but at the time of recreation again the same CIM error I am getting.
Is this problem because of my EP is only based on Java??
Can I switch SLD HOST to my PI system as this is ABAP+JAVA? If possible its no big problem for me because its new implementation and only PI DEV and EP DEV two systems are there in this SLD group.
Please reply with your good experience skills.
Regards,
Jay

So can you please tell me how to resolve this problem. I tried to delete all PI technical systems and recreate ones again. It gets delete but at the time of recreation again the same CIM error I am getting.
Is this problem because of my EP is only based on Java??
You need to import SLD with latest cimsap & cr content to reflect ABAP & JAva systems provided by SAP....
Can I switch SLD HOST to my PI system as this is ABAP+JAVA? If possible its no big problem for me because its new implementation and only PI DEV and EP DEV two systems are there in this SLD group.
You can have SLD on EP or XI.. Technically it donse't matter. But as PI relies heavily on SLD, i would recommend the SLD to be moved to PI & EP sytem pointing to PI-SLD..
How to repoint SLD... Check SLD Installation guides...
-Siva Maranani

Acknowledgements between SAP and Webservices systems

Hi , I have integrated a SAP and legacy system ( with webservices ) . I woul dlike to know how i can enchance the integrations with acknowledgements . It would be nice if both the systems know what happened to their sent message. I have gone through the document 'how to handle IDOC acknowledgements' . It only talks about sender and receiver systems being sap systems.
Any design ideas with acknowledgements ? The Syncronous calls are fine cos they get back a response. I would like to know how to deal with IDOC acknowledgemnts and the response from the webservice interface.
Thank you
Sudheer

>>It only talks about sender and receiver systems being sap systems.
No it doesn't talks only about SAP-SAP system.
the last section(i guess last 2-3 pages) explain acknowledgment in case of legacy-SAP system
Please check the last section of that .pdf
Thanx
aamir

Define WebService System

Similar Messages

Maybe you are looking for