How to run LDAP server?

LDAP Server (slapd) is stopped how can I it to run?

Hi
I’ve seen your other post and it seems to be related, so this reply to applies to both of your posts. For LDAP Services and Kerberos authentication to run you need to configure DNS and promote your server to an Open Directory Master. An Open Directory master is an LDAP Server and KDC combined so it does not need to join anything as it is providing these services to any client computers you may want to bind to it.
If you are deploying OSX Server in an existing network with an AD Domain Controller then you can integrate OSX Server and use existing Active Directory LDAP, DNS and KDC Services. It will be the AD Administrator who will have information regarding this. You will need to speak to him if this is the case for your situation.
Before you reply to this look in the Open Directory & Authentication Forum where you will find plenty of advice on what I think is the reason for your post. What exactly do you want to do anyway?
Hope this helps – Tony

Similar Messages

How to run the Server Side Existing rule in Exchange 2010

Hi All,
There were requirement to create a auto forward rule for almost more than 5000 users, which we did, but the we want to apply this rules to the messages which are already in the inbox for all those users where we have created the rule.
Right now the problem what we are facing is for each individual we have to take full access to their mailbox and execute the rule first time and then it works.
this is becoming challenging for us to making this for all 5000 users. the other problem is those user are not regularly login to this mailbox, they are using some other Org mailbox, so even we can not communicate to all of them.
Q1) How to run the Server Side Command which should forcefully apply whatever rules is created for that user should execute for the messages which are already in the inbox.
Q2) or the powershell for for specific rule name, which can apply on the for all the messages which are there in the inbox.
Any help would be appriciated!
Thanks in adv champions!
Ashku

Hi Ashku,
If these 5000 users are all users in your Exchange organization, a inbox rule can be created by the following commands:
Get-Mailbox | foreach {New-InboxRule -Mailbox $_.Name -Name AutoForward -From [email protected] -ForwardTo UserB}
Based on my test, the Inbox rule created in server side also cannot work on the message that have already been in the Inbox unless users click “Run Rules Now…” in their Outlook client. And the transport rule in Exchange server only works
during the message sending process.
Therefore, there may be no feature in Exchange server side to meet your requirement.
Thanks for your understanding.
Thanks,
Winnie Liang
TechNet Community Support

How to run report server in oracle 9i DS

hi..
can any 1 tell me how to run report server in oracle 9i DS
i've installed oracle 9i DS, but don't know how to run
report server.
actually i want to run a report from my form
on button press trigger.. some of the experts r tellin
that 1st u check whether report server is running or not..
so pls tell me how to install report server.
while installing oracle 9i DS, i've given Mail server
as mysmtp.com
Thanks
amit

hi ..
i've to go in this directory n run
rwserver -install repservername
where repserver name is my mailserver..
this will install reports server
Amit

How to determine LDAP server type

Hello,
Please post some hints how to determine LDAP server type(MS AD, OpenLDAP, Novell, Sun...) from rootDSE or somehow else?
Thank you,
Vladislav

Hello Vladislav,
the root DSE should be the best place to look for such
things, I'd say. This is where an LDAP server advertises
its capabilities. However, I'm not aware of an easy, fail-
safe way of doing the distinguishing. One way, which would
need some good logic, though, would be to go by supported
OIDs, e.g. a SunONE DS 5.x will have attribute values like
this in the rootDSE:
supportedExtension=2.16.840.1.113730.3.5.3
supportedExtension=2.16.840.1.113730.3.5.5
(basically saying the DS supports it's own replication
protocol). But it is quite feasible for other servers
to support this protocol and thus advertise those OIDs
in the rootDSE. Therefore you'd probably need to check your
logic again and again for every new release of every known
directory server.
My 2 cents,
Karl.

Telnet on port 7 says connection refused, how to run echo server

where do I need to look at echo server configuration.
how to run echo server on solaris 10 X86.

I got the answer -- svcadm

How to run a server program in the background on Linux or Windows?

I just finished writing a Java network application with multiple clients and one server.
However, I am not sure how I can run the server (SomeServer.class) in the background on Windows. Also when I am running it on Linux, I don't want it to terminate when I logout of the Linux shell.
To run the server on Linux, should I use a command like this?
nohup java -cp . SomeServer.class > output.txt &
Or is there another command, or perhaps some code that I can add to the program so that it would run in the background automatically and/or continues even when I logout of the Linux shell??
Sometimes, I also like to run the program on a Windows XP machine for testing purpose. How can I do it so that it runs in the background without openning a Console/Command Prompt window??
(redirecting the standard output to a file)
And is there an easy way to create a EXE file that runs the program with the default JRE in windows?

On many UNIX systems there's a utility called detach which will launch the following command in such a manner that killing the shell will not kill the process. On systems that lack this command, I'd find an open source implementation and install it.

HOW TO RUN ABAP SERVER PROXY IN BACKGROUND?

Hi All,
I have a ABAP Server Proxy running in WAS 6.20. This Server Proxy runs as a foreground Process when the scenario is executed. if we run a scenario with huge load or run scenarios with continuous load, due to the fact that the server proxy runs as a foreground process, the system slows down and has some performance issues. How to handle this issue.Is there a way to run the Server Proxy as a background Job. Please do help me out.
Regards,
Sundararamaprasad.

hi,
here's an idea: encapsulate your proxy call inside an object which can be ran in background.... like an IDoc !
Steps:
create a zidoc in ECC and use it from PI to ECC to send data (instead of your direct abap proxy call).
Afer that, in z_function_module which is used to intregate your zidoc, call your abap proxy.
in WE20 (partner profile), the process mode of your idoc should be of course "Triggered by background program", and then use a job on program RBDAPP01 (with a variant limited to your zidoc) to process your idocs.
Note:
1. the only interest to do that compare to create a real IDoc interface is just (in my mind) to call a common proxy or to want to reuse an existing proxy without too more effort.
2. of course your current proxy call should be asynchronous.
I never tested it, so it's without warranty !
Regards.
Mickael

How to run App server applications in Client systems

Hi all,
I m new to Oracle Devsuite 10g and App server. I configured the app server and i m able to run in my local machine (server) but i m not able to run in some others machines. even though i have given same path.
its displaying page cannot be dispalyed
My path is http://vagee/forms/frmservlet?config=TEST_APPS
please tell me how to run in client systems?
Regards,
Kalyan

hi
thanks for your reply. i found the problem. In server machine Firewall was in On Mode. So that it was not allow to access. then i have switched off the firewall. now its running well in client systems also.
thank you.

How to query LDAP server and get DB Service names?

Hi, before making a connection to an Oracle database, if i want to get list of Databases available,
i could use OracleClientFactory (and CreateDataSourceEnumerator and GetDataSources) to get list of tnsnames from the local tnsnames.ora file
Now, if i instead want to query the LDAP server with a given context and get the DB Service list,
how can i do that using ODP.NET?
I am using Visual Studio C# 2010 and ODP.NET 11.2
Thanks,
-srinivas yelamanchili

The oracle client has an ldap.ora file, how can I use ODP.NET to read the ldap.ora file and get list of oracle instances available?
Thanks,
-sri

How to change LDAP server setting in Access Manager 6.2

Hi,
We have initially set authentication as a SunONE Directory Server 5.1 (master DS1) in Sun Java System Access Manager 6.2. In both /etc/opt/SUNWam/config/serverconfig.xml
/etc/opt/SUNWam/config/AMConfig.properties
conf files, DS1 was set initially. Also on console's Service Configuration ->LDAP->Primary LDAP Server was set as "DS1"
Now the problem is that I am not able to change the DS1 to the other master "DS2". I set DS2 in both above conf files and also the Service Configuration page as Primary LDAP Server. I restarted the server. When I stopped the DS1, I couldn't login access manager console with any user. It looks like it is still trying to get authentication from DS1.
Does anybody know what I am missing here?
Regards,

After hopeless tries, I finally made it work;) The trick was actually updating the sunKeyValue attribute of the entry:
"dn:ou=default,ou=OrganizationConfig,ou=1.0,ou=iPlanetAMAuthLDAPService,ou=ser
vices,dc=company,dc=com" in one of the master DS I have.
Even though I set DS2 and loadBalancer hosts in all conf files and in Primary LDAP conf in amconsole's Service Configuration, it just didn't work until I inserted loadBalancer host in sunKeyValue attribute.
Hope it helps to someone....
-Bora

How to build LDAP server?

Hi all!
I do have address book of company based on Oracle tables, what
should I do populate them as LDAP entries? Does it true that
the only option is to copy address book entries to existing
LDAP server? Or I could use known API to build my own LDAP server
on top of available DB tables?
Thanks in advance,
Paul

You may be able to find something which sits in front
of your db and makes it "look like" an LDAP data store
to your jndi code. The only such thing I'm aware of is
something called "VDE" ("Virtual Directory Engine" I
think) from a company called "OctetString".
What you can do with their product (and it is a
commercial product) is configure an adapter which, on
one side, does SQL calls to your db and, on the other,
responds to JNDI calls. So the flow is something like:
(1) your program makes a jndi call, which (2) goes to
VDE which (3) translates the call into one or more sql
calls (which you configure inside the product), (4)
then VDE collects the resulting data, (4) swizzles it
into the appropriate objects and (5) responds to your
original JNDI call.
I've never used their product in this way but this is
my understanding, conceptually anyway, of what it
does. There may also be other gizmos available
elsewhere which work this way. Thanks a lot! It's exactly what I have been looking for!
I've downloaded evaluation copy, checked and right now
writing memo for finance guys asking to allocate financial
resources to buy VDE :)
Paul

How to run ldap in URL

I would like to connect windows server 2012 via browser by using
ldap://ip:389 , but when I run this URL , it pops "Launch application , windows contacts , choose an application..." , I am administrator but can not do that , would advise how to do it to let me use this method "ldap://ip:389"
to connect the LDAP ? thanks

You should post this Windows Server Forum to get a fix. This Forum is to discuss and share ideas about Windows PowerShell.
Are you trying something in Scripting? Correct me if I am wrong.
Regards Chen V [MCTS SharePoint 2010]

How to run SQL SERVER 2014 EXPRESS ON WINDOWS 8?

I installed SQL SERVER 2014 EXPRESS(132 mb) after that when I check "All programs" I don't see any GUI to use SQL.
I know MySQL and Linux. In MySQL client I can do,
$MySQL -p -u root Password:*****
but in SQL SERVER which client GUI I can use. How do I run queries?
Can anyone give me suggestions to use SQL server. Please

Please download SQL Server Management Studio Express from the following URL. When installing it finished you can see it in "All Programs" or simply by calling it via Run... using this command:
ssms.exe
Download Microsoft SQL Server 2014 Express
Cheers,
Saeid Hasani
Database Consultant
Please feel free to contact me at [email protected] as well as on Twitter and Facebook.
[My Writings on TechNet Wiki] [T-SQL Blog] [Curah!]
[Twitter] [Facebook] [Email]

How to run Standalone Server as a Service in Linux

Hi,
I need run an Standalone server in Java as a Service in Linux RedHat?
How to do this? some example or link to helpful sample code?
How I can execute as a service in Linux RedHat 9 the following server Application?
import java.io.*;
import java.nio.*;
import java.nio.channels.*;
import java.nio.channels.spi.*;
import java.net.*;
import java.util.*;
// Listen on a port for connections and write back the current time.
public class NBTimeServer_1 {
private static final int DEFAULT_TIME_PORT = 8900;
// Constructor with no arguments creates a time server on default port.
public NBTimeServer_1() throws Exception {
acceptConnections(this.DEFAULT_TIME_PORT);
// Constructor with port argument creates a time server on specified port.
public NBTimeServer_1(int port) throws Exception {
acceptConnections(port);
// Accept connections for current time. Lazy Exception thrown.
private static void acceptConnections(int port) throws Exception {
// Selector for incoming time requests
Selector acceptSelector = SelectorProvider.provider().openSelector();
// Create a new server socket and set to non blocking mode
ServerSocketChannel ssc = ServerSocketChannel.open();
ssc.configureBlocking(false);
// Bind the server socket to the local host and port
//InetAddress lh = InetAddress.getLocalHost();
InetSocketAddress isa = new InetSocketAddress(port);
ssc.socket().bind(isa);
SelectionKey acceptKey = ssc.register(acceptSelector,
SelectionKey.OP_ACCEPT);
int keysAdded = 0;
while ((keysAdded = acceptSelector.select()) > 0) {
// Someone is ready for I/O, get the ready keys
Set readyKeys = acceptSelector.selectedKeys();
Iterator i = readyKeys.iterator();
// Walk through the ready keys collection and process date requests.
while (i.hasNext()) {
SelectionKey sk = (SelectionKey)i.next();
i.remove();
ServerSocketChannel nextReady =
(ServerSocketChannel)sk.channel();
// Accept the date request and send back the date string
Socket s = nextReady.accept().socket();
// Write the current time to the socket
ObjectOutputStream oos = new ObjectOutputStream(s.getOutputStream());
oos.writeObject(new Zaehler("usr","msg"));
I thanks in Advance your valuable help.

Crossposted.

HOW TO RUN SQL SERVER DATABASE AS ONLINE

hi friends
i have developed an application front end is vb.net and back end is sql 2005. now my customer has required to run application on remote server because he have 5 business locations. for example my customer has 5 business locations in different cities now
he want to access single database for all these location and want to store data on bridge server.how can i do this actually i have no idea to connect and run online database with desktop application.
please give me step by step instruction in detail

Step by Step guide: http://www.codeproject.com/Questions/433687/sql-server-connectity-over-the-internet

How to run LDAP server?

Similar Messages

Maybe you are looking for