How to run mrp as a background job

Hi
my client is asking me to schedule an mrp run for 1 plant at 8pm.
how do i do this. can i schedule mrp in such a way that it automatically runs every day at 8pm.
is there ane report where i can get all the planned orders that are generated for that mrp run irrespective of material.

Deepu,
I can't imagine why a person would want to see ALL planned orders for an MRP run. If this is a legitimate requirement, you could do an SE16 display of table PLAF.
In most companies, planning workload is divided up amongst various MRP controllers. Each controller wishes to see only the planned orders that are relevant for his products.
CO41 is a transaction that is designed for the mass conversion of planned orders to production orders. However, the initial display screen is in fact a listing of planned orders. This is the type of report that a planner would be more likely to wish to review. It allows branching to MD04 and to other relevant screens which would help a planner to make the relevant decisions.
Regards,
DB49

Similar Messages

How to run the program in background job,program should run in 3 days.

Dear Gurus,
i have a program , that program should run approximately 3 days to get the result.
i scheduled this program as a background job.
how can i run sto5 t-code for this same program.
i that case how we can trace the output.
Experts please help me out.
Thank u very much.
Regards
sudheer

Hello Sudheer,
The trace can be set on background jobs by using ST12 transaction. Please make sure that the trace is activated for only few minutes in production environment.
Contact your basis team to activate trace on background job and the transaction used is ST12.
Thanks

How to select server in which background job should run

Hi,
I want to run my program as background job. I want the user to select the server, in which background job should be run, in the selection screen of my program. When it is sheduled in background the job should run in the selected server.
How to do this?
Regards,
Sriram

Hi,
please write the code like as below.
DATA : D_GROUP like TBTCJOB-JOBGROUP.
use the function moulde JOB_OPEN.
D_JOBNAME = SY-REPID.
D_GROUP- BTCSYSREAX = " pass the target server name Here
     CALL FUNCTION 'JOB_OPEN'
        EXPORTING
             JOBNAME          = D_JOBNAME
             JOBGROUP       = D_GROUP
        IMPORTING
             JOBCOUNT         = D_JOBNO
        EXCEPTIONS
             CANT_CREATE_JOB = 1
             INVALID_JOB_DATA = 2
             JOBNAME_MISSING = 3
             OTHERS           = 4.
submit   <Program name>
              USER SY-UNAME VIA JOB D_JOBNAME NUMBER D_JOBNO
              USING SELECTION-SET ' var1 '   " Give varient name
              AND RETURN.
CALL FUNCTION 'JOB_CLOSE'
           EXPORTING
                JOBCOUNT             = D_JOBNO
                JOBNAME              = D_JOBNAME
                STRTIMMED            = 'X'
           IMPORTING
               JOB_WAS_RELEASED     = D_REL
           EXCEPTIONS
               CANT_START_IMMEDIATE = 1
               INVALID_STARTDATE    = 2
               JOBNAME_MISSING      = 3
               JOB_CLOSE_FAILED     = 4
               JOB_NOSTEPS          = 5
               JOB_NOTEX            = 6
               LOCK_FAILED          = 7
               OTHERS               = 8.
Hope this will helps you
Regards
Kiran

How to find process chain using background job in sm37

How to find process chain using background job in sm37

Better is to select the job.
Select (Define) Step (s) or F6.
Select the line and Menu Goto>Variant.
The variant contains the name of the CHAIN and its VARIANT.
Success
We faced an old job and via job monitoring we were informed about a cancelled job every 'interval'.
We noticed that the related chain was deleted but still the job was scheduled each interval again and was cancelled because an event was missing
We could not find the scheduled job via SM37.
Via view V_OP, view over tbtco abd tbtcp, we find the related entry.
We delete these entries via function BP_JOB_DELETE....
Edited by: Jack Otten on Jul 9, 2010 2:50 PM

How to run form in the background from command line

please can anybody tell me to
how to run form in the background from command line
vishal

Ummm....Oracle Forms is a foreground runtime kind of thing. What you want is a database procedure (or an OS utility - it depends on what sort of processing you want to do in the background).
Cheers, APC

How to run a program in background and how to check the output

I have to run my program as background job... it has a selection screen...... and i need to check the output after its complete.

hi,
u need to create one program for this.
tables:btcevtjob.
parameters:job(32).
data:count like btcevtjob-jobcount.
call the function modules JOB_OPEN,JOB_SUBMIT AND JOB_CLOSE
and pass the parameters in those function modules.
once u execute this program,
go with sm37->provide jobname->select the option scheduled
->execute
selct the entry->go with release option.
under releasae select immediate option
save
select the job name again
go with release
status is in finished stage
now go with spool option
give spool no
go for display
o/p displayed.
before this,go for se38->provide the name of program which u want to run in back ground->seelct variants->change->provide variant name->go for create->provide input value->go with attributes->provide description->save
this variant name u have to give in the job_submit fm.
or
se38->program->execute->in back ground
Reward points if useful,
Thanks,
Usha

How to run MRP on different storage location level ?

Dear Experts,
Need your valuable guidance to solve the below requirement form the client-
1) My client want to enter a "safety stock level" for one spare part/ Material on the basis of individual storage locations.
           For sake of example: in SL01 he wants the safety stock for particular material set to 5
                              In FS18 he wants the safety stock set to 2
                              In FS15 he wants the safety stock set to 1
Kindly tell me whether it is possible? & guide me how to do it.
2) Also tell me how to run MRP on a storage location level?
           This is because after maintaining different safety stocks for one material in different storage locations, is it possible to appear each storage location with their differing safety stock levels?
I checked the MRP type maintained & its-1 (plant) & not as- 2 (storage location).
Kindly guide me for the above issue
Thanks in advance for your support.
Regards,
Mehul

Hi Umashanker,
Thanks for your suggession . Accordingly I have resolved the issue.
Regards,
Mehul

How to run mrp and capacity leveling through heuritics.

Hi,
How to run mrp and capacity leveling through heuritics.
What are the setps required for production planning run this thing in the heuritics in pp/ds?
Regards,
Sunil

Sunil,
APO PP/DS doesn't have a 1-to-1 match for MRP/Cap levelling per se. There are, though, a limitless number of ways to achieve the results you want.
Start with a basic PP planning MRP - SAP_PP_002, which will should create all necessary planned orders
Then try a DS heuristic to schedule your orders according to capacity. Schedule Sequence SAP001 is a good starting point. This can be used to schedule your cap relevant work centers such that they fully load the capacity available, similar to cap levelling.
Rgds,
DB49

How to run a scene in background in javafx

How to run a scene in background in javafx?

Can you explain better your objective?
Because all your scenes vars will be loaded when your app run. The scene is a visual artifact and running it in background could not be usual
Regards

How to Execute WebDynpro Applications as Background Job ?

Hi Gurus,
We have developed a lot of WDJ applications with component reusage; ie,
quite a lot of business logic are wrapped in WDJ Components which are
re-used by other WD UIs.
Now we'd like to automate some of the processes with background jobs
and faced with a few problems :
#1. How can we write a background WD application which can be
triggered by external mechanism and without presenting any UI?
#2. If we write the background program in a Java DC, how can we
invoke existing methods in WD components ?
Anyone got a clue ??
Ying-Jie Chen

Hello Amit,
> Well I can think of a workaround in this case.If you are aware
> of the suspend-resume functionality of the WD application then
> its possible to run the WD application virtually in background.
[ stuffs deleted ...]
It sounds like a possible alternative to our requirement, I'll
spend some time to investigate on the WD suspend-resume mechanism !
> Also let me know why are you preffering the WD if you dont
> require its UI
Our application requires the process to be performed with UI interaction;
with some instances it should be run as a background job. Either case involves
RFC calls to backend SAP R/3 and it's easy for RFC access with WD
Component. Though it's also possible to use CAF application service for
RFC access; due to some technical constrains, we did not use CAF
framework. Therefore it ends up where we are now ...
Thanks for your tip!
Ying-Jie Chen

How to run a program in background?

Hi abapers,
I want to run a program in background using sm36 and sm37.But i am not aware of input in that tansaction.So kindly tell me the steps ho run a program in background.
Regards
Ansuman

Hi Ansuman Parhi,
by useing T-codes
First go to transaction SM36 to schedule the job.
When you enter the "Start condition" for job, do as follow.
Select processing by "Date/Time".
Enter date as current date.
Let us say you are scheduling this job today then give date 08/30/2007.
Check "periodic job" checkbox.
Hit "periodic value" button and select to run "Daily"
Also have a look on below thread
Re: How to run program in background?
This is how to do it through code
data: lv_job_name like tbtco-jobname,
lv_job_nr like tbtco-jobcount,
lv_job_released type c,
lv_job_start_sofort type c,
lv_print_parameters type pri_params.
lv_job_name = 'Z_test'. " your background program name
call function 'JOB_OPEN'
exporting
jobname = lv_job_name
importing
jobcount = lv_job_nr
exceptions
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
others = 4.
if syst-subrc = 0.
*submit job with all the selection screen params...
submit (lv_job_name)
with applfile = applfile
with p_lines = p_lines
with rfc_dest = rfcdest
with p_selmtd = lv_selmtd
with px_shsim = px_shsim
with px_sherr = px_sherr
user syst-uname
via job lv_job_name number lv_job_nr and return.
if sy-subrc = 0.
call function 'JOB_CLOSE'
exporting
jobcount = lv_job_nr
jobname = lv_job_name
strtimmed = 'X'
importing
job_was_released = lv_job_released
exceptions
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
others = 8.
if syst-subrc 0.
message i162(00) with
'An error occured while closing the background job.'.
stop.
endif.
endif.
endif.
skip 1.
write: / 'Background process', lv_job_name ,
'called successfully' no-gap.
write: / 'You can check the job in transaction SM37'.
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7

How to run a BAPI in background mode?

Dear friends,
I have a requirement [In the UI user can choose two options - run online or run backgroud] to run a BAPI (BAPI_SALESORDER_CHANGE) in background mode (background job) , does anybody know how to implement it?
Thanks a lot!!

Hi
You can define 2 radio button one foreground and otherfor background then
for background use FM BP_JOB_CREATE or BKK_UPT_DISP_JOBS_START or DB2_SCHEDULE_JOB_IMMED
Regards
Shiva

It has an error when run a program in background job

Dear Expert,
we have a program
when run it in background,it has a error "Error during import of clipboard contents" but when run it normally(run in front workbench se38 or run the t-code),everything is ok.i've used typingJDBG in the command box to debuge the background job,there has no error.
whould you like to tell me what had happen? thanks a lot!
addition: the program used a function ALSM_EXCEL_TO_INTERNAL_TABLE
Thanks & Regards,
Kerry
Edited by: Kerry Wang on Aug 24, 2009 2:12 PM
Edited by: Kerry Wang on Aug 24, 2009 2:14 PM
Edited by: Kerry Wang on Aug 24, 2009 2:14 PM

Hi,
You cannot use FMs to get data directly from the presentation server when program is executed in the backgroud.
Check the thread : GUI_DOWNLOAD
Regards,
Himanshu

How to submit the report in Background job.

Hello Friends,
In the selection screen I have 2 radio buttons one for background Process & other for foreground processing. if the user selects the background processing the program should execute in background and output need to be sent to SAP Inbox.
Issues:
1) If I am using the JOB_Submit FM or Report Submit the program is going to infinite loop and many continiously jobs are are being scheduled. How to avoid.
2) Is there any best possible way to send the mail to SAP Inbox.
Note: I am using OOALV in my program....
Thanks,
Ravi

Hi,
the first problem looks like you have an infinite recursion. You just need to avoid background scheduling again. There is a system field sy-batch. So if this field is equal to 'X' then you are already in background mode and you don't need to schedule your background job again. Another way is to split your program in two programs. The first will be responsible for scheduling or executing the second one.
You can use FM SO_NEW_DOCUMENT_SEND_API1 to send message to workflow inbox. You need to user receiver type B. There are so many posts on this forum about sending emails from ABAP which may help you with implementing this requirement.
Cheers

How to Upload a file in background job

Hi,
I am facing a problem is i have to upload a file but i have to run that program in background, by using gui upload or ws upload will not run in background canany one pls tell me how to do that .

There is no other easy solution.
Some complicate options are to:
1] In the selection screen take the file name which is the presentation server...write code to copy this file to the appserver and the submit the program to run in background and read using open dataset.
2] There are also some complicated ways of accessing the presentation server in background by creating rfc destinations for the PC a accessing it thru function modules, but these are not recommended.

How to run mrp as a background job

Similar Messages

Maybe you are looking for