It has an error when run a program in background job
Dear Expert,
we have a program
when run it in background,it has a error "Error during import of clipboard contents" but when run it normally(run in front workbench se38 or run the t-code),everything is ok.i've used typingJDBG in the command box to debuge the background job,there has no error.
whould you like to tell me what had happen? thanks a lot!
addition: the program used a function ALSM_EXCEL_TO_INTERNAL_TABLE
Thanks & Regards,
Kerry
Edited by: Kerry Wang on Aug 24, 2009 2:12 PM
Edited by: Kerry Wang on Aug 24, 2009 2:14 PM
Edited by: Kerry Wang on Aug 24, 2009 2:14 PM
Hi,
You cannot use FMs to get data directly from the presentation server when program is executed in the backgroud.
Check the thread : GUI_DOWNLOAD
Regards,
Himanshu
Similar Messages
-
Runtime error when running sample program VS8, occi10
Please, help!
When running a sample program (VS2005 v8, oraocci10.lib, oraocci10.dll, both downloaded from the recommended Oracle site http://www.oracle.com/technology/tech/oci/occi/occidownloads.html for Oracle release 10.2.0.3.0 )
I receive the following runtime error:
R6034 An application has made an attempt to load the C runtime library incorrectly.
When I build the program with VS 7 or VS 7.1 libraries, I receive env->CreateConnection errorHi,
Can you just give more explanation on what you are trying to do, like conditions.
Are doing first time init.
Reg
Pra -
Error when running a program /RPM/FIN_PLAN_INT
when executing the program "/RPM/FIN_PLAN_INT", I'm getting an error stating as "Category ID does not exist for item.Instantiate categories first"
This error is hitting for only 4 Items in list of all 173 Item. Hence the Financial cost are not getting update for all the items when executing the program. The DB update failed.
I checked the financial Category IDs and its maintained properly and working fine with other Items. Why this is happening for only the 4 items? Am I missing something in config?
Please experts provide me some valuable suggesions.Hi;
When you define and edit the mapping between the project management role function ID and the financial planning view, category, or group. You can also decide on whether the cost or revenue rate is to be considered for the financial information calculation.
1. Execute report /RPM/PLAN_INT_PREP to create financial and capacity categories and groups for the bucket or the portfolio items based on the parameters mentioned in the selection screen.
2. Execute report /RPM/FIN_PLAN_INT to perform the financial planning for a portfolio item for the different portfolio items based on the parameters mentioned in the selection screen.
Prerequisite: For the portfolio item, you must have executed report /RPM/PLAN_INT_PREP before.
3. Execute report /RPM/BUCKET_ROLLUP to roll up the financial data for the different categories and groups of the portfolio items to its higher-level buckets.
Hope this help you.
Best Regards.
Mariano -
Getting an error when running my program but it compiles.
Hey guys, I'm having a problem running the program. Everything compiles correctly, but then I get the error code linked below. Everything I think is correct here. Any ideas? I posted CinReader as well in case you wanted to try compiling and running it yourself.
Thanks
public class TextShuffleLevel
private String jumble;
private String [] matchString;
public TextShuffleLevel ()
jumble = "dunops";
matchString = new String[5];
matchString[0] = new String("abound");
matchString[1] = new String("bound");
matchString[2] = new String("undo");
matchString[3] = new String("band");
matchString[4] = new String("bond");
public TextShuffleLevel (int whichDefaultLevel)
if (whichDefaultLevel == 1)
jumble = "dunops";
matchString = new String[5];
matchString[0] = new String("abound");
matchString[1] = new String("bound");
matchString[2] = new String("undo");
matchString[3] = new String("band");
matchString[4] = new String("bond");
else if (whichDefaultLevel == 2)
jumble = "srcaso";
matchString = new String[11];
matchString[0] = new String("across");
matchString[1] = new String("crass");
matchString[2] = new String("cross");
matchString[3] = new String("scars");
matchString[4] = new String("soars");
matchString[5] = new String("arcs");
matchString[6] = new String("soar");
matchString[7] = new String("scar");
matchString[8] = new String("oars");
matchString[9] = new String("cars");
matchString[10] = new String("orcs");
else
jumble = "eplcis";
matchString = new String[19];
matchString[0] = new String("splice");
matchString[1] = new String("spiel");
matchString[2] = new String("plies");
matchString[3] = new String("slice");
matchString[4] = new String("clips");
matchString[5] = new String("epics");
matchString[6] = new String("spice");
matchString[7] = new String("epic");
matchString[8] = new String("lice");
matchString[9] = new String("slip");
matchString[10] = new String("clip");
matchString[11] = new String("pile");
matchString[12] = new String("lisp");
matchString[13] = new String("pies");
matchString[14] = new String("isle");
matchString[15] = new String("lips");
matchString[16] = new String("lies");
matchString[17] = new String("ices");
matchString[18] = new String("pics");
public TextShuffleLevel (String newJumble, String [] newMatchString)
jumble = newJumble;
matchString = newMatchString;
/* This is the nasty one */
public boolean findMatch (String matchTry)
boolean foundMatch = false;
for (int i=0; i<matchString.length; i++)
if (matchTry.equalsIgnoreCase(matchString))
foundMatch = true;
break;
return foundMatch;
public void setJumble (String newJumble)
jumble = newJumble;
public void setMatchStrings (String [] newMatchString)
matchString = newMatchString;
public String getJumble ()
return jumble;
public int getJumbleLength ()
return jumble.length();
public int getNumberOfMatches ()
return matchString.length;
public String[] getMatchString ()
return matchString;
public class TextShuffleGame
private int playerLevel = 1; // start them on level 1
private CinReader reader;
private TextShuffleLevel l1;
private TextShuffleLevel l2;
private TextShuffleLevel l3;
private TextShuffleLevel onTheFly;
public TextShuffleGame ()
reader = new CinReader();
// Using Statically Set Levels
l1 = new TextShuffleLevel(1);
l2 = new TextShuffleLevel(2);
l3 = new TextShuffleLevel(3);
// this one allows for a 'custom' level
String fly[] = {"tea","at", "ate"};
onTheFly = new TextShuffleLevel("eta", fly);
//Setup for levels
public void go ()
boolean quit = false;
char choice = 'z';
int lastLevel = 0;
while (quit == false)
lastLevel = playerLevel;
if (playerLevel == 1)
play(l1);
else if (playerLevel == 2)
play(l2);
else if (playerLevel == 3)
play(l3);
else
play(onTheFly);
if (lastLevel == playerLevel)
System.out.print("Play the level again");
else
System.out.print("Play next level");
System.out.print("(y/n)? ");
choice = reader.readChar();
if (choice == 'N' || choice == 'n')
quit = true;
//Playing each level the same
public void play (TextShuffleLevel theLevel)
int numGuesses = 0;
int numCorrect = 0;
String userString = "";
System.out.println("What " + theLevel.getJumbleLength() + "-letter words can you get out of " +
theLevel.getJumble() + "?\n");
while (numGuesses < 5 && numCorrect < theLevel.getNumberOfMatches())
System.out.print("Enter a string: ");
userString = reader.readString();
if (theLevel.findMatch(userString) == true)
System.out.println("Great! A match!");
numCorrect = numCorrect + 1;
else
System.out.println("Drat... not a match");
numGuesses = numGuesses + 1;
if (numCorrect == theLevel.getNumberOfMatches())
System.out.println("Terrific! You are ready to try a harder jumble");
playerLevel = playerLevel + 1;
/* FOR TESTING ONLY -- TO BE REMOVED FOR RELEASE */
public static void main (String [] args)
TextShuffleGame tsg = new TextShuffleGame();
tsg.go();
import java.io.*;
import java.util.*;
public class CinReader
private static final int INT_MESSAGE = 0;
private static final int DOUBLE_MESSAGE = 1;
private static final int CHAR_MESSAGE = 2;
private static final int STRING_MESSAGE = 3;
private static final int BOOLEAN_MESSAGE = 4;
private static final String DEFAULT_ERROR_MESSAGE = "Please reenter. ";
private String prompt = "> ";
private String [] errorMessages;
public CinReader ()
prompt = "> ";
setDefaultMessages();
public CinReader (String newPrompt)
prompt = newPrompt;
setDefaultMessages();
public CinReader (String newPrompt, String [] newErrorMessages)
prompt = newPrompt;
if (newErrorMessages != null)
setErrorMessages(newErrorMessages);
else
setDefaultMessages();
public void setPrompt (String newPrompt)
prompt = newPrompt;
public void setErrorMessages (String [] newErrorMessages)
if (newErrorMessages != null)
int diff = errorMessages.length - newErrorMessages.length;
// NEED A MINIMUM OF 5 ERROR MESSAGES TO AVOID ERRORS
if (diff > 0)
errorMessages = new String[5];
for (int i=0; i<5; i++)
if (i < newErrorMessages.length)
errorMessages[i] = new String(newErrorMessages);
else
errorMessages[i] = new String(DEFAULT_ERROR_MESSAGE);
else
errorMessages = newErrorMessages;
public void setErrorMessage (int idx, String msg)
if (idx >= 0 && idx < errorMessages.length)
errorMessages[idx] = msg;
public void setErrorMessageString (String msg)
errorMessages[STRING_MESSAGE] = msg;
public void setErrorMessageInt (String msg)
errorMessages[INT_MESSAGE] = msg;
public void setErrorMessageDouble (String msg)
errorMessages[DOUBLE_MESSAGE] = msg;
public void setErrorMessageChar (String msg)
errorMessages[CHAR_MESSAGE] = msg;
public void setErrorMessageBoolean (String msg)
errorMessages[BOOLEAN_MESSAGE] = msg;
public String readString()
char theChar = 'x';
String result = "";
boolean done = false;
while (!done)
theChar = nextChar();
if (theChar == '\n')
done = true;
else if (theChar == '\r'){}
else
result = result + theChar;
return result;
public String readString (boolean allowEmpty)
String result = readString();
if (!allowEmpty)
while (result.length() == 0)
System.out.println("Empty input not allowed. " + errorMessages[STRING_MESSAGE]);
System.out.print(prompt);
result = readString();
return result;
public String readString (int charLimit)
String result = readString();
if (result.length() > charLimit)
result = result.substring(0, charLimit);
return result;
public String readString (boolean allowEmpty, int charLimit)
String result = readString(allowEmpty);
if (result.length() > charLimit)
result = result.substring(0, charLimit);
return result;
public int readInt()
String inputString = "";
int number = 0;
boolean done = false;
while (!done)
try
inputString = readString();
inputString = inputString.trim();
number = (Integer.valueOf(inputString).intValue());
done = true;
catch (NumberFormatException e)
System.out.println("Input is not an integer. " + errorMessages[INT_MESSAGE]);
System.out.print(prompt);
return number;
public int readInt(int min, int max)
String inputString = "";
int number = 0;
boolean done = false;
while (!done)
try
inputString = readString();
inputString = inputString.trim();
number = (Integer.valueOf(inputString).intValue());
if (number < min || number > max)
System.out.println("Please enter an integer between " + min + " and " + max);
else
done = true;
catch (NumberFormatException e)
System.out.println("Input is not an integer. " + errorMessages[INT_MESSAGE]);
System.out.print(prompt);
return number;
public double readDouble()
String inputString = "";
double number = 0;
boolean done = false;
while (!done)
try
inputString = readString();
inputString = inputString.trim();
number = (Double.valueOf(inputString).doubleValue());
done = true;
catch (NumberFormatException e)
System.out.println("Input is not an integer. " + errorMessages[DOUBLE_MESSAGE]);
System.out.print(prompt);
return number;
public char readChar()
boolean done = false;
String inputString = "";
char nonWhite = 'x';
while (!done)
inputString = readString();
inputString = inputString.trim();
if (inputString.length() != 1)
System.out.println("Input must be a single character. " + errorMessages[CHAR_MESSAGE]);
System.out.print(prompt);
else
nonWhite = (inputString.charAt(0));
done = true;
return nonWhite;
public char readChar (String range)
char theChar = 'x';
boolean done = false;
while (!done)
theChar = readChar();
for (int i=0; i<range.length(); i++)
if (theChar == range.charAt(i))
done = true;
break;
if (!done)
System.out.print("Invalid input. Please enter one of the following -> ");
for (int i=0; i<range.length(); i++)
System.out.print(range.charAt(i) + " ");
System.out.print("\n" + prompt);
return theChar;
public boolean readBoolean()
boolean done = false;
String inputString = "";
boolean result = false;
while (!done)
inputString = readString(false);
inputString = inputString.trim();
if (inputString.equalsIgnoreCase("true") || inputString.equalsIgnoreCase("t"))
result = true;
done = true;
else if (inputString.equalsIgnoreCase("false") || inputString.equalsIgnoreCase("f"))
result = false;
done = true;
else
System.out.println("Input must be [t]rue or [f]alse. " + errorMessages[BOOLEAN_MESSAGE]);
System.out.print(prompt);
return result;
private void setDefaultMessages ()
errorMessages = new String[5];
for (int i=0; i<errorMessages.length; i++)
errorMessages[i] = new String(DEFAULT_ERROR_MESSAGE);
private char nextChar()
int charAsInt = -1;
try
charAsInt = System.in.read();
catch(IOException e)
System.out.println(e.getMessage());
System.out.println("Fatal error. Exiting program.");
System.exit(0);
return (char)charAsInt;Ok, here's what I did using the JSE 8.1 IDE.
1) I copied your code into a .java file named "TextShuffleGame".
It generated about half a dozon errors.
There are three classes in the program:
TextShuffleLevel
TextShuffleGame
CinReader
Each of these classes is declared "public" and I got the same error message on each one:
"class ... is public, should be declared in a file name ... .java"
so, I...
2) tried changing them to "private".
It then said: "modifier private not allowed here".
so, I...
3) deleted the modifiers for these three classes and left them as just class. No errors.
The next two errors had to do with the two import statements:
"import java.io.*;" and "import java.util.*;".
It said: "'class' or 'identifier' expected" for both. So, I...
4) moved them to the top of the source file.
Didn't help at first. So, I...
5) fiddle around with them a bit.
I tried "java.io;" and "java.util;" and then "java.*;" by itself. Still got errors. So, I put them back as you had them and for some mysterious reason, my editor decided they were fine. oO
This also corrected the last errors in the "CinReader" class. Here is the error-free code I now have in my "TextShuffleGame.java" file:
import java.io.*;
import java.util.*;
class TextShuffleLevel
private String jumble;
private String [] matchString;
public TextShuffleLevel ()
jumble = "dunops";
matchString = new String[5];
matchString[0] = new String("abound");
matchString[1] = new String("bound");
matchString[2] = new String("undo");
matchString[3] = new String("band");
matchString[4] = new String("bond");
public TextShuffleLevel (int whichDefaultLevel)
if (whichDefaultLevel == 1)
jumble = "dunops";
matchString = new String[5];
matchString[0] = new String("abound");
matchString[1] = new String("bound");
matchString[2] = new String("undo");
matchString[3] = new String("band");
matchString[4] = new String("bond");
else if (whichDefaultLevel == 2)
jumble = "srcaso";
matchString = new String[11];
matchString[0] = new String("across");
matchString[1] = new String("crass");
matchString[2] = new String("cross");
matchString[3] = new String("scars");
matchString[4] = new String("soars");
matchString[5] = new String("arcs");
matchString[6] = new String("soar");
matchString[7] = new String("scar");
matchString[8] = new String("oars");
matchString[9] = new String("cars");
matchString[10] = new String("orcs");
else
jumble = "eplcis";
matchString = new String[19];
matchString[0] = new String("splice");
matchString[1] = new String("spiel");
matchString[2] = new String("plies");
matchString[3] = new String("slice");
matchString[4] = new String("clips");
matchString[5] = new String("epics");
matchString[6] = new String("spice");
matchString[7] = new String("epic");
matchString[8] = new String("lice");
matchString[9] = new String("slip");
matchString[10] = new String("clip");
matchString[11] = new String("pile");
matchString[12] = new String("lisp");
matchString[13] = new String("pies");
matchString[14] = new String("isle");
matchString[15] = new String("lips");
matchString[16] = new String("lies");
matchString[17] = new String("ices");
matchString[18] = new String("pics");
public TextShuffleLevel (String newJumble, String [] newMatchString)
jumble = newJumble;
matchString = newMatchString;
/* This is the nasty one */
public boolean findMatch (String matchTry)
boolean foundMatch = false;
for (int i=0; i<matchString.length; i++)
if (matchTry.equalsIgnoreCase(matchString))
foundMatch = true;
break;
return foundMatch;
public void setJumble (String newJumble)
jumble = newJumble;
public void setMatchStrings (String [] newMatchString)
matchString = newMatchString;
public String getJumble ()
return jumble;
public int getJumbleLength ()
return jumble.length();
public int getNumberOfMatches ()
return matchString.length;
public String[] getMatchString ()
return matchString;
class TextShuffleGame
private int playerLevel = 1; // start them on level 1
private CinReader reader;
private TextShuffleLevel l1;
private TextShuffleLevel l2;
private TextShuffleLevel l3;
private TextShuffleLevel onTheFly;
public TextShuffleGame ()
reader = new CinReader();
// Using Statically Set Levels
l1 = new TextShuffleLevel(1);
l2 = new TextShuffleLevel(2);
l3 = new TextShuffleLevel(3);
// this one allows for a 'custom' level
String fly[] = {"tea","at", "ate"};
onTheFly = new TextShuffleLevel("eta", fly);
//Setup for levels
public void go ()
boolean quit = false;
char choice = 'z';
int lastLevel = 0;
while (quit == false)
lastLevel = playerLevel;
if (playerLevel == 1)
play(l1);
else if (playerLevel == 2)
play(l2);
else if (playerLevel == 3)
play(l3);
else
play(onTheFly);
if (lastLevel == playerLevel)
System.out.print("Play the level again");
else
System.out.print("Play next level");
System.out.print("(y/n)? ");
choice = reader.readChar();
if (choice == 'N' || choice == 'n')
quit = true;
//Playing each level the same
public void play (TextShuffleLevel theLevel)
int numGuesses = 0;
int numCorrect = 0;
String userString = "";
System.out.println("What " + theLevel.getJumbleLength() + "-letter words can you get out of " +
theLevel.getJumble() + "?\n");
while (numGuesses < 5 && numCorrect < theLevel.getNumberOfMatches())
System.out.print("Enter a string: ");
userString = reader.readString();
if (theLevel.findMatch(userString) == true)
System.out.println("Great! A match!");
numCorrect = numCorrect + 1;
else
System.out.println("Drat... not a match");
numGuesses = numGuesses + 1;
if (numCorrect == theLevel.getNumberOfMatches())
System.out.println("Terrific! You are ready to try a harder jumble");
playerLevel = playerLevel + 1;
/* FOR TESTING ONLY -- TO BE REMOVED FOR RELEASE */
public static void main (String [] args)
TextShuffleGame tsg = new TextShuffleGame();
tsg.go();
class CinReader
private static final int INT_MESSAGE = 0;
private static final int DOUBLE_MESSAGE = 1;
private static final int CHAR_MESSAGE = 2;
private static final int STRING_MESSAGE = 3;
private static final int BOOLEAN_MESSAGE = 4;
private static final String DEFAULT_ERROR_MESSAGE = "Please reenter. ";
private String prompt = "> ";
private String [] errorMessages;
public CinReader ()
prompt = "> ";
setDefaultMessages();
public CinReader (String newPrompt)
prompt = newPrompt;
setDefaultMessages();
public CinReader (String newPrompt, String [] newErrorMessages)
prompt = newPrompt;
if (newErrorMessages != null)
setErrorMessages(newErrorMessages);
else
setDefaultMessages();
public void setPrompt (String newPrompt)
prompt = newPrompt;
public void setErrorMessages (String [] newErrorMessages)
if (newErrorMessages != null)
int diff = errorMessages.length - newErrorMessages.length;
// NEED A MINIMUM OF 5 ERROR MESSAGES TO AVOID ERRORS
if (diff > 0)
errorMessages = new String[5];
for (int i=0; i<5; i++)
if (i < newErrorMessages.length)
errorMessages[i] = new String(newErrorMessages[i]);
else
errorMessages[i] = new String(DEFAULT_ERROR_MESSAGE);
else
errorMessages = newErrorMessages;
public void setErrorMessage (int idx, String msg)
if (idx >= 0 && idx < errorMessages.length)
errorMessages[idx] = msg;
public void setErrorMessageString (String msg)
errorMessages[STRING_MESSAGE] = msg;
public void setErrorMessageInt (String msg)
errorMessages[INT_MESSAGE] = msg;
public void setErrorMessageDouble (String msg)
errorMessages[DOUBLE_MESSAGE] = msg;
public void setErrorMessageChar (String msg)
errorMessages[CHAR_MESSAGE] = msg;
public void setErrorMessageBoolean (String msg)
errorMessages[BOOLEAN_MESSAGE] = msg;
public String readString()
char theChar = 'x';
String result = "";
boolean done = false;
while (!done)
theChar = nextChar();
if (theChar == '\n')
done = true;
else if (theChar == '\r'){}
else
result = result + theChar;
return result;
public String readString (boolean allowEmpty)
String result = readString();
if (!allowEmpty)
while (result.length() == 0)
System.out.println("Empty input not allowed. " + errorMessages[STRING_MESSAGE]);
System.out.print(prompt);
result = readString();
return result;
public String readString (int charLimit)
String result = readString();
if (result.length() > charLimit)
result = result.substring(0, charLimit);
return result;
public String readString (boolean allowEmpty, int charLimit)
String result = readString(allowEmpty);
if (result.length() > charLimit)
result = result.substring(0, charLimit);
return result;
public int readInt()
String inputString = "";
int number = 0;
boolean done = false;
while (!done)
try
inputString = readString();
inputString = inputString.trim();
number = (Integer.valueOf(inputString).intValue());
done = true;
catch (NumberFormatException e)
System.out.println("Input is not an integer. " + errorMessages[INT_MESSAGE]);
System.out.print(prompt);
return number;
public int readInt(int min, int max)
String inputString = "";
int number = 0;
boolean done = false;
while (!done)
try
inputString = readString();
inputString = inputString.trim();
number = (Integer.valueOf(inputString).intValue());
if (number < min || number > max)
System.out.println("Please enter an integer between " + min + " and " + max);
else
done = true;
catch (NumberFormatException e)
System.out.println("Input is not an integer. " + errorMessages[INT_MESSAGE]);
System.out.print(prompt);
return number;
public double readDouble()
String inputString = "";
double number = 0;
boolean done = false;
while (!done)
try
inputString = readString();
inputString = inputString.trim();
number = (Double.valueOf(inputString).doubleValue());
done = true;
catch (NumberFormatException e)
System.out.println("Input is not an integer. " + errorMessages[DOUBLE_MESSAGE]);
System.out.print(prompt);
return number;
public char readChar()
boolean done = false;
String inputString = "";
char nonWhite = 'x';
while (!done)
inputString = readString();
inputString = inputString.trim();
if (inputString.length() != 1)
System.out.println("Input must be a single character. " + errorMessages[CHAR_MESSAGE]);
System.out.print(prompt);
else
nonWhite = (inputString.charAt(0));
done = true;
return nonWhite;
public char readChar (String range)
char theChar = 'x';
boolean done = false;
while (!done)
theChar = readChar();
for (int i=0; i<range.length(); i++)
if (theChar == range.charAt(i))
done = true;
break;
if (!done)
System.out.print("Invalid input. Please enter one of the following -> ");
for (int i=0; i<range.length(); i++)
System.out.print(range.charAt(i) + " ");
System.out.print("\n" + prompt);
return theChar;
public boolean readBoolean()
boolean done = false;
String inputString = "";
boolean result = false;
while (!done)
inputString = readString(false);
inputString = inputString.trim();
if (inputString.equalsIgnoreCase("true") || inputString.equalsIgnoreCase("t"))
result = true;
done = true;
else if (inputString.equalsIgnoreCase("false") || inputString.equalsIgnoreCase("f"))
result = false;
done = true;
else
System.out.println("Input must be [t]rue or [f]alse. " + errorMessages[BOOLEAN_MESSAGE]);
System.out.print(prompt);
return result;
private void setDefaultMessages ()
errorMessages = new String[5];
for (int i=0; i < errorMessages.length; i++)
errorMessages[i] = new String(DEFAULT_ERROR_MESSAGE);
private char nextChar()
int charAsInt = -1;
try
charAsInt = System.in.read();
catch(IOException e)
System.out.println(e.getMessage());
System.out.println("Fatal error. Exiting program.");
System.exit(0);
return (char)charAsInt;
Hope that helps. -
How to run the program in background job,program should run in 3 days.
Dear Gurus,
i have a program , that program should run approximately 3 days to get the result.
i scheduled this program as a background job.
how can i run sto5 t-code for this same program.
i that case how we can trace the output.
Experts please help me out.
Thank u very much.
Regards
sudheerHello Sudheer,
The trace can be set on background jobs by using ST12 transaction. Please make sure that the trace is activated for only few minutes in production environment.
Contact your basis team to activate trace on background job and the transaction used is ST12.
Thanks -
Appcomp error when running design program
Hi, I am trying to run an embroidery digitizing program in Windows XP (I have Boot Camp). Program is Design Shop v. 9. It appeared to install correctly, and I have since installed a newer version. The program uses a dongle and when the program is opened and you begin to use it it crashes and gives me this error message. C:\DOCUME~1\carol\locks~1\temp\c5ba_appcompat.txt
Program runs successfully on pc.
I know there are others using this program on a mac. I appreciate any help in making this my actual work machine and not just the most expensive itunes system around.Hi Carol and welcome to Discussions,
googling for c5ba_appcompat.txt gave this link to a Spyware/Malware analysis website: http://www.spywarelib.com/remove--Trojan-Backdoor-bifrose-etv.html
Could be one reason why it crashes.
But it is also possible, that this .txt file contains viable informations why the program crashes (e.g. some sort of crash report).
Might be a good idea to contact the manufacturer of DesignShop about this error.
Regards
Stefan -
Resman has fatal errors when run from start menu
I have a VME chassis connected to my computer via an NI MXI-2 bus. When I run resman out of MAX, it works fine. When it automatically runs on startup or when I run it from the start menu, it bombs out with a windows fatal error. This has happened for years, on multiple different computers. This isn't a huge deal, so I haven't investigated it before. Is this a known bug? Is there a way to fix this annoyance? I'm running latest driver versions of everything, although the VXI driver has remained static for quite some time from NI.
I just discovered the different operation today - start menu vs. in MAX. I think it may be a clue...This is somewhat of a known issue. Take a look at the following KB:
http://digital.ni.com/public.nsf/allkb/851CD72FA50001B0862571100081237B?OpenDocument
Chad B. » National Instruments » ni.com -
ReplaceAll() error when run the program
Hi everyone, I am developing an application to replace one string by another string with the method replaceAll() or replaceFirst() on NWDS v2.0.14.
I have changed the Java Build Path from jdk1.3 to j2sdk 1.4.2_10 in order to make those two methods available.
There is no problem in build and deployment. But when execute this application I get an error telling there is no such method. When I comment out the line with the method in the code I can run this application without any error. I am sure the error is caused by the method.
Can you tell me how to fix this problem? Should jdk of Java engine on server be upgraded?
Any hint will be appreciated.
Kind regards.
WangAs you use NWDS 2.0.14 I guess you also run SP14 of your engine, so your engine should already run on top of JDK 1.4.
You can add a line like this to your code to verify it:
System.getProperty("java.version")
Regards,
Dieter -
Error When Running ANY Program
Anytime I try to run ANY Java program, i get the following error:
Exception in thread "main" java.lang.NoClassDefFoundError: Program Name
I am POSITIVE I have compiled the programs and the *.class file appears. Anyone have any idea whats going on?Anytime I try to run ANY Java program, i get the
following error:
Exception in thread "main"
java.lang.NoClassDefFoundError: Program Name
I am POSITIVE I have compiled the programs and the
*.class file appears. Anyone have any idea whats going
on?I just ran across what appears to be the exact same problem. The solution was to clear the CLASSPATH variable in the registry first, by entering "set classpath=", then calling the program with "java <program name>". In your case:set classpath=
java InvoiceAppType both in the directory where InvoiceApp.class is located. If, for some reason, that doesn't work, try:set classpath=<path to library directory of Java installation>
set classpath=
java InvoiceAppAn example of the library directory of the Java installation would be "\Program Files\Java\j2re1.4.2_02\lib"
A more permanent solution would be to remove the CLASSPATH key from the registry (the one under the SYSTEM category). This should also cause any other Java program to run correctly. However, the above should take care of the problem in the short-term.
Here is the link to the thread, in case it might help you out further:
http://forum.java.sun.com/thread.jsp?forum=32&thread=467639&tstart=0&trange=15
Best of luck, and hope this helps. -
Error when running RFUMSV50 program (no output)
Hi Experts ;
The RFUMSV50 program does not generate transfer lines of deferred VAT ,
The context is the following one:
Code VAT Created with code target VAT, general account of VAT also created,
Rule of deferred VAT created and activated for the company code in question, with marks to compensate for check.
The data of tests are the following ones:
Creation of an invoice via the FB60,
Integral payment of the invoice via F-53,
Creation of the confirmation of the operation in bank via the manual statement FF67,
Clearing of the intermediate banking account with the bank account via F-03.
After all these elements, by executing the RFUMSV50 program, I have nothing in result.
There somebody who had the same problem, could help us?
Thank you.
Best regardsHi
Service Tax credit cannot be utilized unless the Vendor Invoice is Paid. This is the reason till the payment is done the service tax Amount will be accumulated in deferred tax account and once the invoice is paid the balance in deferred tax is need to be transferred to respective Service Tax , Educational Cess and higher Education Cess account. There can be various business scenarios for full and Partial Payment to facilitates the transfer of such deferred balance to respective account SAP has come up with some new standard program RFUMSV50 instead of RFUMSV25. To overcome the limitation of this program i.e. not able to take care of more than one tax line item, below the solution is provided with scenarios “Full Payment is made to Vendor Invoice”.
hope this is help ful
thanks
Trinath -
Tsv_tnew_blocks_no_roll_memory error while running a program in background
Hi All,
I have a report which if i run in background is giving me dump.I am getting tsv_tnew_blocks_no_roll_memory error.I checked in debugging and am pasting the code
where it is failing
Fetching delivery history
SELECT ebeln ebelp zekkn vgabe
gjahr belnr buzei bwart
budat menge xblnr lfbnr
FROM ekbe
INTO TABLE t_ekbe
FOR ALL ENTRIES IN t_eket
WHERE ebeln = t_eket-ebeln
AND ebelp = t_eket-ebelp
AND bwart IN r_bwart.
In the internal table t_eket there are 2400000 records.
Also there are many other hufe internal tables in the run time in program.
I think this error is bacause of memory allocation or lack of it.
So any solutions are most welcome.
I have tried using free itab.
Am verifying it now.
Please suggest.
Thanks in advance,
Saket.Is there a way to filter more data in T_EKET.
2400000 in For all entries is too much for a select query.
Regards,
Mohaiyuddin -
Failed to Run OLE Excel program in background JOB (SM36)
Please help.
I have write a program to use OLE to create a Excel file.
The program can run successful in front end workstation. However, when I run the program in background job by SM36.
The statement "CREATE OBJECT EXCEL 'EXCEL.APPLICATION'" return with error "SY-SUBRC = 2".
How can I solve it ?
Can OLE Excel be run on background job ?
Thanks so much,
MarkHi Mark:
Your need is a very common one. I also was asked to generate an Excel in Background.
It is not possible to work with OLE in background mode.
The reason is: In background mode there is no presentation server. OLE is executed in presentation server.
Below I paste the code I wrote to solve my problem.
This class sends a mail with an excel attached. The Excel content will be the internal table you pass to the class. But the Excel is not binary, it is a plain text file, separated by tabulators. Anyway, when you open it with Excel, the columns are properly shown.
Sorry. Comments are in spanish, I don't have time to translate it.
I kindly ask to everybody which want to use it to keep my name in the code.
* Autor: Jordi Escoda, 30/10/2008.
* Descripción: Esta clase genera un correo electrónico destinado a
* una persona, adjuntando el contenido de una tabla interna como
* Excel (campos separados por tabuladores).
* La virtud de esta clase es su sencillez de utilización. Para lanzar
* el mail con el excel adjunto basta con declarar la tabla interna,
* llenarla, colocar el asunto del mensaje, el destinatario, el nombre
* del excel adjunto, y pasar la tabla interna.
* Ejemplo de utilización:
* DATA: lc_mail TYPE REF TO cl_mail_builder_xls_attach.
* DATA: lt_anla TYPE STANDARD TABLE OF anla.
* SELECT * INTO TABLE lt_anla FROM anla.
* CREATE OBJECT lc_mail.
* CALL METHOD lc_mail->set_subject( 'Excel adjunto' ).
* CALL METHOD lc_mail->set_recipient( 'XXX@XXXDOTCOM' ).
* CALL METHOD lc_mail->set_attach_filename( 'ANLA' ).
* APPEND 'Cuerpo del mensaje' TO lt_body.
* APPEND 'Saludos cordiales' TO lt_body.
* CALL METHOD lc_mail->set_bodytext( lt_body ).
* CALL METHOD lc_mail->set_attach_table( lt_anla ).
* CALL METHOD lc_mail->send( ).
* CLASS cl_mail_builder_xls_attach DEFINITION
CLASS cl_mail_builder_xls_attach DEFINITION.
PUBLIC SECTION.
METHODS: set_subject
IMPORTING im_subject TYPE so_obj_des,
set_bodytext
IMPORTING im_body TYPE bcsy_text,
set_recipient
IMPORTING im_recipient TYPE ad_smtpadr,
set_attach_table
IMPORTING im_table TYPE ANY TABLE,
set_attach_filename
IMPORTING im_attach_name TYPE sood-objdes,
send.
PRIVATE SECTION.
CONSTANTS:
c_tab TYPE c VALUE cl_bcs_convert=>gc_tab,
c_crlf TYPE c VALUE cl_bcs_convert=>gc_crlf,
c_singlequote TYPE c VALUE '.
DATA: l_recipient_addr TYPE ad_smtpadr.
DATA: send_request TYPE REF TO cl_bcs,
document TYPE REF TO cl_document_bcs,
recipient TYPE REF TO if_recipient_bcs,
bcs_exception TYPE REF TO cx_bcs.
DATA: binary_content TYPE solix_tab,
size TYPE so_obj_len.
DATA: l_string TYPE string,
l_body_text TYPE bcsy_text,
l_subject TYPE so_obj_des,
l_attach_name TYPE sood-objdes.
METHODS: create_binary_content,
get_dataelement_medium_text
IMPORTING im_table_name TYPE tabname
im_field_name TYPE fieldname
EXPORTING ex_medium_text TYPE scrtext_m.
ENDCLASS. "cl_mail_builder_xls_attach DEFINITION
* CLASS cl_mail_builder_xls_attach IMPLEMENTATION
CLASS cl_mail_builder_xls_attach IMPLEMENTATION.
METHOD set_bodytext.
l_body_text[] = im_body[].
ENDMETHOD. "add_bodytext
METHOD set_subject.
l_subject = im_subject.
ENDMETHOD. "add_subject
METHOD set_attach_filename.
l_attach_name = im_attach_name.
ENDMETHOD. "add_subject
METHOD set_recipient.
l_recipient_addr = im_recipient.
ENDMETHOD. "add_subject
METHOD set_attach_table.
* Rellena en un string el contenido de la tabla interna recibida
DATA: ref_to_struct TYPE REF TO cl_abap_structdescr.
DATA: my_like TYPE fieldname,
nombretabla TYPE tabname,
nombrecampo TYPE fieldname,
texto_mediano TYPE scrtext_m.
DATA: l_idx TYPE i,
l_valorcampo(16) TYPE c,
l_long TYPE i.
FIELD-SYMBOLS: <fs_linea> TYPE ANY,
<fs_campo> TYPE ANY.
FIELD-SYMBOLS: <comp_descr> TYPE abap_compdescr.
CHECK NOT im_table[] IS INITIAL.
* Línea con los nombres de las columnas.
CLEAR l_string.
LOOP AT im_table ASSIGNING <fs_linea>.
* Toma los atributos del componente
ref_to_struct =
cl_abap_structdescr=>describe_by_data( <fs_linea> ).
LOOP AT ref_to_struct->components ASSIGNING <comp_descr>.
ASSIGN COMPONENT <comp_descr>-name
OF STRUCTURE <fs_linea> TO <fs_campo>.
* Obtenemos el origen de donde proviene (like). Ej:BKPF-BUDAT
DESCRIBE FIELD <fs_campo> HELP-ID my_like.
SPLIT my_like AT '-' INTO nombretabla nombrecampo.
CALL METHOD get_dataelement_medium_text
EXPORTING
im_table_name = nombretabla
im_field_name = nombrecampo
IMPORTING
ex_medium_text = texto_mediano.
IF texto_mediano IS INITIAL.
CONCATENATE l_string <comp_descr>-name INTO l_string.
ELSE.
CONCATENATE l_string texto_mediano INTO l_string.
ENDIF.
AT LAST.
CONCATENATE l_string c_crlf INTO l_string.
EXIT.
ENDAT.
CONCATENATE l_string c_tab INTO l_string.
ENDLOOP.
EXIT.
ENDLOOP.
* Contenido de la tabla
LOOP AT im_table ASSIGNING <fs_linea>.
* Toma los atributos del componente
ref_to_struct =
cl_abap_structdescr=>describe_by_data( <fs_linea> ).
LOOP AT ref_to_struct->components ASSIGNING <comp_descr>.
* Asignamos el componente ue tratamos, para obtener
* el valor del mismo
ASSIGN COMPONENT <comp_descr>-name OF STRUCTURE <fs_linea>
TO <fs_campo>.
CASE <comp_descr>-type_kind.
WHEN 'P'. "Packed Number
* Convierte a caracter
WRITE <fs_campo> TO l_valorcampo.
CONCATENATE l_string l_valorcampo INTO l_string.
WHEN OTHERS.
l_long = STRLEN( <fs_campo> ).
IF l_long > 11 AND <fs_campo> CO ' 0123456789'.
* El Excel muestra un número tal como 190000000006
* en formato 1,9E+11.
* Para eviarlo, los números de más de 11 dígitos los
* concatenamos con comillas simples.
CONCATENATE l_string c_singlequote
<fs_campo> c_singlequote INTO l_string.
ELSE.
CONCATENATE l_string <fs_campo> INTO l_string.
ENDIF.
ENDCASE.
AT LAST.
* Añade CRLF
CONCATENATE l_string c_crlf INTO l_string.
EXIT.
ENDAT.
* Añade tabulador
CONCATENATE l_string c_tab INTO l_string.
ENDLOOP.
ENDLOOP.
create_binary_content( ).
ENDMETHOD. "set_attach_table
METHOD create_binary_content.
DATA: l_size TYPE so_obj_len.
* convert the text string into UTF-16LE binary data including
* byte-order-mark. Mircosoft Excel prefers these settings
* all this is done by new class cl_bcs_convert (see note 1151257)
TRY.
cl_bcs_convert=>string_to_solix(
EXPORTING
iv_string = l_string
iv_codepage = '4103' "suitable for MS Excel, leave empty
iv_add_bom = 'X' "for other doc types
IMPORTING
et_solix = binary_content
ev_size = size ).
CATCH cx_bcs.
MESSAGE e445(so).
ENDTRY.
ENDMETHOD. "create_binary_content
METHOD send.
DATA: l_sent_to_all TYPE os_boolean.
TRY.
* create persistent send request
send_request = cl_bcs=>create_persistent( ).
* create and set document with attachment
* create document object
document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = l_body_text
i_subject = l_subject ).
* add the spread sheet as attachment to document object
document->add_attachment(
i_attachment_type = 'xls'
i_attachment_subject = l_attach_name
i_attachment_size = size
i_att_content_hex = binary_content ).
* add document object to send request
send_request->set_document( document ).
* add recipient (e-mail address)
recipient =
cl_cam_address_bcs=>create_internet_address(
l_recipient_addr ).
* add recipient object to send request
send_request->add_recipient( recipient ).
* send document
l_sent_to_all = send_request->send(
i_with_error_screen = 'X' ).
COMMIT WORK.
IF l_sent_to_all IS INITIAL.
MESSAGE i500(sbcoms) WITH l_recipient_addr.
ELSE.
MESSAGE s022(so).
ENDIF.
CATCH cx_bcs INTO bcs_exception.
MESSAGE i865(so) WITH bcs_exception->error_type.
ENDTRY.
ENDMETHOD. "lcl_mail_xls_attachment
METHOD get_dataelement_medium_text.
DATA: lt_fld_info TYPE STANDARD TABLE OF dfies,
wa_fld_info TYPE dfies.
* Busca en el diccionario los datos del campo
CALL FUNCTION 'DDIF_FIELDINFO_GET'
EXPORTING
tabname = im_table_name
fieldname = im_field_name
langu = sy-langu
TABLES
dfies_tab = lt_fld_info
EXCEPTIONS
not_found = 1
internal_error = 2
OTHERS = 3.
CLEAR ex_medium_text.
IF sy-subrc = 0.
READ TABLE lt_fld_info INDEX 1 INTO wa_fld_info.
* Si lo ha podido tomar del diccionario...
IF NOT wa_fld_info-scrtext_m IS INITIAL.
* Toma el nombre del nombre de campo del diccionario
ex_medium_text = wa_fld_info-scrtext_m.
ENDIF.
ENDIF.
ENDMETHOD. "get_dataelement_medium_text
ENDCLASS. "cl_mail_builder_xls_attach IMPLEMENTATION -
How to run a program in background and how to check the output
I have to run my program as background job... it has a selection screen...... and i need to check the output after its complete.
hi,
u need to create one program for this.
tables:btcevtjob.
parameters:job(32).
data:count like btcevtjob-jobcount.
call the function modules JOB_OPEN,JOB_SUBMIT AND JOB_CLOSE
and pass the parameters in those function modules.
once u execute this program,
go with sm37->provide jobname->select the option scheduled
->execute
selct the entry->go with release option.
under releasae select immediate option
save
select the job name again
go with release
status is in finished stage
now go with spool option
give spool no
go for display
o/p displayed.
before this,go for se38->provide the name of program which u want to run in back ground->seelct variants->change->provide variant name->go for create->provide input value->go with attributes->provide description->save
this variant name u have to give in the job_submit fm.
or
se38->program->execute->in back ground
Reward points if useful,
Thanks,
Usha -
SQL serever 2012 Setup has encountered an error when running a windows installer file
I am trying to install SQL server 2012 Express on a windows 7 PC for 2 days now. I feel like banging my head against the wall.
I keep getting the following errors here's the full log
The following error has occurred:
SQL Server Setup has encountered an error when running a Windows Installer file.
Windows Installer error message: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'. Please refer
to Help and Support for more information. HRESULT: 0x8007054F. Windows Installer file: C:\Users\Receno\AppData\Local\Temp\SQL Server 2012\Setup\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi Windows Installer log file: C:\Program Files\Microsoft SQL Server\110\Setup
Bootstrap\Log\20150109_213740\SqlSupport_Cpu64_1_ComponentUpdate_1.log
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDC80C325hmmm..so which hotfix do I apply ?
SQL Server 2012
All (Global) x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
SQL Server 2012
All (Global) x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global) x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global) x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global) x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global)
x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
<input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
<input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
<input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
<input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
<input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
<input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
<input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
<input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global)
x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
<input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
<input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
<input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
<input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
<input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
<input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
<input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
<input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
SQL Server 2012
All (Global)
x64
2012_RTM_DAC_CU11_2908007_11_0_2424_x64
<input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
<input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
<input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
<input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x64
2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
<input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_DAC_CU11_2908007_11_0_2424_x86
<input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
<input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
<input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
SQL Server 2012
All (Global)
x86
SQLServer2012_RTM_CU11_2908007_11_0_2424_x86 -
I have compiled a program for a target after I added a new vi from NI_AALPro.lvlib. The addition worked fine on my development computer but gave me errors when run on the target.
The box displayed:
Missing subVI NI_AALBase.lvlib:1D Linear Evaluation.vi in VI NI_PtbyPt.lvlib:Linear Fit PtbyPt.vi
Missing subVI NI_AALPro.lvlib:MSE.vi in VI NIPtbtPt.lvlib:Linear Fit PtbyPt.vi
What do I need to do to bring the correct library into the transportable code?Hello,
I was unable to reproduce the behavior that you saw. I was able to deploy my application with the Linear Fit PtByPt without issues.
Could you attach the smallest piece of code that reproduces this behavior so that I can test it as well?
Justin Parker
National Instruments
Product Support Engineer
Maybe you are looking for
-
I've been burning discs via ITunes for six months w/o issue. I recently started having a problem: After the cd burning finishes I get a quick audio blast followed by a 'Windows Visual C++' error tab on my bottom toolbar, and a rotating blue hourglass
-
Error when publishing web templates in the portal
hi Gurus, I am getting this error when I try to publish my web report on the portal, Field E_SX_META_DATA not a member of OUTPUT. Can anyone please let me know how to go about fixing this error ? Thanks in advance, Nip
-
Cannot open FF at all, causes pc to freeze. Only happened since recent update
After updating FF, have not been able to load FF. It causes complete pc to freeze. Have tried deleting FF and re installing in Kaspersky, still no luck. Ned to open FF to get to bookmarks. Am having to use chrome for now, but want FF as have used it
-
How to create SSWA plsql function in Oracle Apps of HTML call .html
Hello Team, I am working on Oracle Apps 11i (11.5.10.2) I want to know , what is the process to create a , "SSWA plsql function" in Oracle Apps of type "HTML" and html call tab. How to create that Function and how to attach the PL/SQL code to these f
-
Error in xml parse procedure :
hi, I am trying to read an xml file and insert data into a database table. When I compile the code I get the following warnings : PL/SQL: Item ignored PLS-00201: identifier 'XMLPARSER.PARSER' must be declared PL/SQL: Item ignored PLS-00201: identifie