How to run multiple packages in one process chain

Hi,
we want to run a script logic with badi, followed by a standard move function. The BADI will perform a check and generate an error. If no error occurs, the move can continue ...
We created our own process chain, which is in fact the combination of a script logic and a move. The data package has underlaying syntax.
Problem is that the data package does not trigger the process chain ... Nothing happens when running it. When checking the status, nothing gets in here ... We assigned the correct process chain and get message a postivie message when running the package... Is this not possible?
PROMPT(COPYMOVEINPUT,%SELECTION%,%TOSELECTION%,"Selecteer de gegevens waarvoor een omboeking dient te gebeuren","%CATEGORY_DIM%,%ENTITY_DIM%,PRODUCTIEHUIS,PRODUCTIEWIJZE,NET,KWADRANT")
INFO(%TEMPNO1%,%INCREASENO%)
INFO(%ACTNO%,%INCREASENO%)
INFO(%EQU%,=)
INFO(%TAB%,;)
TASK(ZBPC_RUN_LOGIC,TAB,%TAB%)
TASK(ZBPC_RUN_LOGIC,EQU,%EQU%)
TASK(ZBPC_RUN_LOGIC,SUSER,%USER%)
TASK(ZBPC_RUN_LOGIC,SAPPSET,%APPSET%)
TASK(ZBPC_RUN_LOGIC,SAPP,%APP%)
TASK(ZBPC_RUN_LOGIC,SELECTION,%SELECTION%)
TASK(ZBPC_RUN_LOGIC,LOGICFILENAME,STOCK.LGF)
TASK(/CPMB/CM_CONVERT,OUTPUTNO,%TEMPNO1%)
TASK(/CPMB/CM_CONVERT,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/CM_CONVERT,SAPPSET,%APPSET%)
TASK(/CPMB/CM_CONVERT,SAPP,%APP%)
TASK(/CPMB/CM_CONVERT,SELECTION,%SELECTION%)
TASK(/CPMB/CM_CONVERT,TOSELECTION,%TOSELECTION%)
TASK(/CPMB/CM_CONVERT,CLEARDATA,0)
TASK(/CPMB/CLEAR_SOURCE_CUBE,CHECKLCK,1)
TASK(/CPMB/CLEAR_SOURCE_CUBE,SELECTION,%TOSELECTION%)
TASK(/CPMB/APPEND_LOAD,INPUTNO,%TEMPNO1%)
TASK(/CPMB/APPEND_LOAD,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/APPEND_LOAD,RUNLOGIC,%RUNLOGIC%)
TASK(/CPMB/APPEND_LOAD,CHECKLCK,1)
TASK(/CPMB/APPEND_LOAD,CLEARDATA,0)
TASK(/CPMB/CLEAR_CUBE,CHECKLCK,1)
TASK(/CPMB/CLEAR_CUBE,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/CLEAR_CUBE,SELECTION,%SELECTION%)

Hi Sheldon,
we never have issues when we combine standard objects, like a cliear with a load inforprovider, or the master data integration you mentioned in your document. However, from the moment we combine a script logic with a standard package (like a move) it does not work .The data package contains the task needed for the script and for the move. the process chain is called up but always comes in error in the first step (BPC modify dynamically ) ... there is also no log when checking the view status ...
I can sent you some screenshots if you like ...
D

Similar Messages

How to run multiple sqls in one jasper report

Hello!
Is there any one that can help me in integrating/ viewing my xml file to the web. I have my GUI in jsp format, the jsp makes a call to the bean class and then finally bean class hit my reports java class.The report java class generates the report and shows it in the new window.
The problem is with writing mutiple sql queries and showing the result from multiple sql queires in one report.
I do not know how to write multiple queries for just 1 report. I can give a simple example of my problem also.
My report is as follows:
First Name Middle Name Last name
Sandeep Pathak
Now First and Middle Name come from 1st sql query and Last Name comes from 2nd sql query.
I want to join the result obtained from both the sql queries in one Jasper Report (not as 2 separate sections but as one section).
My problem is how to view my report in the web. furthermore, how to make complex query in jasperassistant, like multiple table in one query, because i�m integrating multiple query in one form or sheets of paper.
Please help me in this.
Thanks
Sandeep
Calance
India

Hi Sheldon,
we never have issues when we combine standard objects, like a cliear with a load inforprovider, or the master data integration you mentioned in your document. However, from the moment we combine a script logic with a standard package (like a move) it does not work .The data package contains the task needed for the script and for the move. the process chain is called up but always comes in error in the first step (BPC modify dynamically ) ... there is also no log when checking the view status ...
I can sent you some screenshots if you like ...
D

How to run multiple reports From One Form with 1 report object?

Hi ALL!
i want to run multiple reports (in 10g technology) from 1 Form having only 1 report object.
i.e
IF parameter=yes THEN
Rpt_new should run
Else
Rpt_old should run
END IF;
How can i do this?
thanks
rana

Rana,
I found this in the Forms online Help. You could easily found it yourself. Don't be afraid of pressing CTRL-H:
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME, 'yourreportsfilename.rdf')Regards,
Martin Malmstrom

How to run multiple scripts in sql*plus?

I would like to run 2 scripts in sql*plus, how do I do this? I tried the following, but it won't run.
create table student_new
AS
select *
from student
insert into student_new
(last_name, first_name
values
(Crop, Jenny)
The above are the two scripts I want to run, what am I doing wrong.
Thanks

Do you have a solution to run multiple scripts continuosly, one after the other as one script.
Say I have file1.sql file2.sql, file3.sql.
I want to create a script run.sql, where this will run file1.sql,file2.sql,file3.sql one after other without any one running one after the other like follows:
run.sql should have
begin
@file1.sql
@file2.sql
@file3.sql
dbms_output.put_line(select sysdate from dual);
end;
If I run run.sql all the three scripts should be executed successfully and then display the current time . All these files have update statements(50,000 updates each file).
Very urgetn. Can some one hlpe, please.
Thanks in advance.

Best way to control and run multiple (up to 20) processes independantly in LV

Hi all,
I'm trying to build an application in LV to independantly control and run multiple (up to 20) processes, ie, it should be able to start and stop any of the processes at any given time. What would the best way to code for this? Off the top of my head would be to use a unique notifier to control each of the process, but I'm thinking that the code upkeep may be a handful with this number of notifiers being defined. Are there better ways of doing this?
Appreciate any help and insight on this.Thanks a bunch in advance!
Solved!
Go to Solution.

I forgot some more important questions:
How large is your development group?
How much "discipline" do you want to program into the Process Commands framework? For instance, is it OK for any VI to command a process into a certain state, or should your program generate a broken wire or run-time error if a command is sent from a non-authorized source?
Where do your needs fall on this spectrum: simplicity that gets the job done and the product out the door and will probably not need much maintenance or upgrading, or flexible framework that will likely undergo multiple upgrades or fall into the hands of multiple developers?
a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

Run multiple apps from one browser windows with 9ias r2

We are running 9ias r1 with forms 6i as our production server. Users are able to access one html page with multiple links to their applications. They can run one application, keep it running, navigate back to the html page and run a second application.
We are testing 9ias r2 with forms 9i, but when users try to navigate back to the html page to run the second application the first application closes.
Is there a way to have 9ias r2 work the same as r1 and allow users to run multiple application from one html page?

Hi,
Thank you for posting in Windows Server Forum.
You can take rdp of server 2012 R2 from Fedora Linux desktop by running Yum command or Gnome rdp support. Please check below article for information.
1. How to Use Remote Desktop (rdesktop) in Redhat/Fedora/CentOS
2. Remote desktop from Linux to windows using rdesktop and gnome-rdp
3. XRDP Installation: An Easy Remote Desktop Setup for Linux
Note:
Microsoft is providing this information as a convenience to you.
The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Hope it helps!
Thanks.
Dharmesh Solanki

How to use multiple ipods on one account

I have an Ipod classic and just bought my sons two nano's how do I use these on the same account without changing my account info?

Take a look here:
How to use multiple iPods with one computer
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

How to execute multiple queries in one stored procedure.

Hi,
I am Kumar,
How to execute multiple queries in one stored procedure.
here is the my requirements,
1. get the max value from one table and sum of the that value.
2. insert the values and also sum of the max value.
using stored procedure
I am using SQL server 2000 database.
Please help me.
Advance thanks
by,
Kumar

This is not a java question and it is not even a problem: your only problem is
1) lack of knowledge
2) lack of interest to find a manual
But you are going to have to change both by actually reading a book or a manual that explains the stored procedure language of SQL Server. It is the same as Sybase I think, so you could also look for a manual for that DBMS.

How can I pass parameters from one process flow to another process flow?

How can I pass parameters from one process flow to another process flow (sub process) in warehouse builder? let me know the steps I have to do in warehouse builder.
Thanks in advance,
Kishan

Hi Kishan,
Please post this question to the Warehouse Builder forum:
Warehouse Builder
Thanks, Mark

How to print multiple copies on one page ?

How to print multiple copies of one document on one page ?
in coreldraw I used to make the document -for example a business card 5x9 - and when sending to print it automatically placed the number of cards that would fit in my A4 sheet.
how do I make the same operation in Indesign.
thanks

Hi, Peter S.
>I can see that as a shortcut to printing a page of different cards for multiple people, but to do a simple n-up of a single card it seems overly complex to me. What am I missing?
* It's just an alternative to copy/paste and step/repeat.
* For a one-time only use, perhaps it's a little more complex than necessary. But for any future needs, only the content of the data file needs to be changed, either by editing, or by pointing to a new data file. If different cards for multiple people becomes necessary, it's ready to go.
Regards,
Peter Gold
KnowHow ProServices

How to scan multiple pages in one file

I would like to know how to scan multiple pages into one file. There is no add button that comes up. I have a HP Officejet 8600 and a macbook pro. Please help, this would really help me out.

Open Preview and use its "Import From Scanner" option in the File menu. This will launch the scanning interface, which has some standard and basic scanning controls. If you choose "PDF" as the file format to save as, then you will see an option to scan all images to one file. When you do this, you will scan and edit them individually, but Preview will save them to the same file when saved.

HT4059 I'm trying to organize my PDFs in iBooks on my ipad2 and I can't figure out how to combine multiple PDFs into one. Any thoughts?

I'm trying to organize my PDFs in iBooks on my ipad2 and can't figure out how to combine multiple PDFs into one. Any thoughts?

I'm trying to organize my PDFs in iBooks on my ipad2 and can't figure out how to combine multiple PDFs into one. Any thoughts?

How to run the package programs in eclipse ?

hi all,
how to run the package programs in eclipse ?
plz clarify...
regards
balakrishna.m

package source code is
package package1;
public class ClassaA
          public void displayA()
               System.out.println("class A");
     }java source code is import package1.ClassA;
     class Packagetest1
          public static void main(String args[])
               ClassA objectA = new ClassA();
               objectA.displayA();
     }if i write the notepad means its executing successfully..
but in eclips is not working..
plz help me..

Stopping one process chain when another is running

Hi All,
We have two process chains which are inter dependent.
One process chain has to be scheduled hourly & another daily.
I would like to know the way to stop the hourly running process chain when the daily process chain is running.
& the daily process chain run time will be varying like 1-2 hours.
Please help me to solve this problem
REDDY

Hi,
You can do it.
1.Create one Table with Flag (Values 0 or 1), and give Table maintaince also in SM30.
2.Craeate one program to check the Table Flag = 0 or 1. If it is 0 then trigger Event then that event will trigger Hourly Process Chain. You need to schedule this Program Hourly. (Your Hourly PC wil work based on Events)
3. Craete Daily Process Chain, once it will start it will update teh Flag =1 then once it will reach the last node it will turn the flag = 0.
Start
    |
Update Flag = 1 in table (Program)
    |
Load data
    |
Update Flag = 0 in table (Program)
4. So every hour your program will run (in Step 2), it will check table Entry and trigger Event.
The code is like below
Report1.
IF Flag = 0 Then
*Raise Event
DATA: EVENTID LIKE TBTCJOB-EVENTID.
DATA: EVENTPARM LIKE TBTCJOB-EVENTPARM.
      EVENTID = 'ZEVENT1'.
      EVENTPARM = 'ZEVENTPARAM'.
CALL FUNCTION 'RSSM_EVENT_RAISE'
          EXPORTING
            I_EVENTID                    = EVENTID
            I_EVENTPARM                  = EVENTPARM
         EXCEPTIONS
           BAD_EVENTID                  = 1
           EVENTID_DOES_NOT_EXIST       = 2
           EVENTID_MISSING              = 3
           RAISE_FAILED                 = 4
           OTHERS                       = 5
        IF SY-SUBRC <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
ELSE
Exit
endif
Note: It will Work try it. Don't forget to give SE30 access to table, because some time if you want to maintain Flag value manually, you required it.
Thanks
Reddy
Edited by: Surendra Reddy on Mar 9, 2009 11:09 AM

Hp printer f4488 HOW TO SCAN MULTIPLE SHEET IN ONE ATTACHMENT

hp printer f4488 HOW TO SCAN MULTIPLE SHEET IN ONE ATTACHMENT Kindly suggest if any solution are their for above subject..

Open Preview and use its "Import From Scanner" option in the File menu. This will launch the scanning interface, which has some standard and basic scanning controls. If you choose "PDF" as the file format to save as, then you will see an option to scan all images to one file. When you do this, you will scan and edit them individually, but Preview will save them to the same file when saved.

How to run multiple packages in one process chain

Similar Messages

Maybe you are looking for