How to run TestStand script on a remote system from a TestStand script?

I would like to run a test stand script on a remote system from within another TestStand script. How can this be done?

Hi EyaID,
I believe you are looking for the Remote Sequence Call feature. Look at this last paragraph in this knowledge base and section 5-18 of the TestStand Reference Manual for more help:
How can I Call an External Sequence with Parameters when the Sequence is Located on Another Computer...
Regards,

Similar Messages

How to call a RFC of a remote system from an ABAP webdynpro component

Dear Experts,
I am a newbie in ABAP Webdynpro.
I am working on a requirement where I have a webdynpro component on ECC system.I need to call a RFC located on CRM system from my webdynpro component on the ECC system.
How do I do that ?? Please help.
Regards,
Mamai.

Calling RFC from some other system is same as local except the difference is that you have to give destination name while calling.
And the regarding the method of calling it depends on your FM.
if it is big RFC with complex structure, you can create the service call for it with destination given as RFC desitination.
if it is simple straight forward RFC you can directly call it.
for creating RFC service call call use this method
1. Starting the Wizard
To start the wizard, position the cursor on the Web Dynpro component to be edited in the object list at the left margin of the
workbench window. Open its context menu and choose the entry Create->Service Call. The wizard is started and leads you
through the creation process.
Press Continue.
2. Choice of Controller
On the second dialog window of the wizard, you can choose whether the service call is to be embedded in an existing
controller or whether a new controller is to be created for this purpose. Service calls can only always be embedded in
global controllers u2013 that is, in the component controller or in additionally created custom controllers. It is not possible, to
embed service calls in view controllers.
a. Select radio button Use Existent Controller
b. Do not change the default entry for component: <CC name>
c. Enter for controller COMPONENTCONTROLLER
d. Press Continue.
3. Service Type and Service Selection
a. You now select, which service type should be used for this service call. Select radio button Function Module. Fill the
destination here. Press Continue.
b. Select the service: for Function Module enter <RFC name>. Press Continue.
4. The Required Methods and Context Elements
On the two subsequent dialog windows, default values are listed for giving names to the context nodes and attributes
required by the service call as well as to the required methods. The proposed names are based on the names of the
embedded service, but you can change them as required. However, heed the respective notes in the corresponding dialog
box.
a. Adapt Context: Select from Nodes/Attributes . Press Continue.
b. Specify Method Name: leave all entries as provided: Component: Controller: COMPONENTCONTROLLER Method: EXCUTE_ Press Continue.
5. Completing the Choice
When you have confirmed the last dialog box, the generation is triggered. Afterwards you now have the required methods
and contexts at your disposal for using them within your Web Dynpro component.
or if you want to call directly the use the call statement with destination

Powershell: how to run vbs script with switches.

Background: To remove a specific service, I usually log into a server, go to path c$\Program files\HP... find a specific vbs, and run it using CMD.exe.
Now, I'm new to powershell, so I'm looking into automating this job. When I use CMD, I run cscript path\serviceinstall.vbs
-r.
How do I add cscript switches to powershell?
IF
((test-path -path "servername\C$\Program Files\...") -eq "true")
invoke-command -scriptblock ""servername\C$\Program Files\...\serviceinstall.vbs -r?

1. You cannot run VBS as a scriptblock.
2. If youactually were to have read the full help ypu would have seen how to use the command.
3. Given you initial questin and the vague answers you gave there is nothing any could do to help you.
If you do not give accurate information you will not likely get answers that are helpful.
I recommend starting at the beginning and learning PowerShell basics. If you had done that you would know that a script block is not a quoted string with vbscript in it or the path to a file.
When working with any technology it is important to read the instructions carefully. It is also useful to knowhow to do basic research on the technology you are trying to learn.
There are 15 examples in PowerShell V2 for Invoke-Command. Here they are as captured directly from PowerShell V2. (The is no update-help on V2. All help is built in.)
-------------------------- EXAMPLE 1 --------------------------
C:\PS>invoke-command -filepath c:\scripts\test.ps1 -computerName Server01
Disks: C:, D:, E:
Status: Warning, Normal, Normal
Description
This command runs the Test.ps1 script on the Server01 computer.
The command uses the FilePath parameter to specify a script that is located on the local computer. The script runs
on the remote computer and the results are returned to the local computer.
-------------------------- EXAMPLE 2 --------------------------
C:\PS>invoke-command -computername server01 -credential domain01\user01 -scriptblock {get-culture}
Description
This command runs a Get-Culture command on the Server01 remote computer.
It uses the ComputerName parameter to specify the computer name and the Credential parameter to run the command in
the security context of "Domain01\User01," a user with permission to run commands. It uses the ScriptBlock paramete
r to specify the command to be run on the remote computer.
In response, Windows PowerShell displays a dialog box that requests the password and an authentication method for t
he User01 account. It then runs the command on the Server01 computer and returns the result.
-------------------------- EXAMPLE 3 --------------------------
C:\PS>$s = new-pssession -computername server02 -credential domain01\user01
C:\PS> invoke-command -session $s -scriptblock {get-culture}
Description
This example runs the same "Get-Culture" command in a session (a persistent connection) on the Server02 remote comp
uter. Typically, you create a session only when you are running a series of commands on the remote computer.
The first command uses the New-PSSession cmdlet to create a session on the Server02 remote computer. Then, it saves
the session in the $s variable.
The second command uses the Invoke-Command cmdlet to run the Get-Culture command on Server02. It uses the Session p
arameter to specify the session saved in the $s variable.
In response, Windows PowerShell runs the command in the session on the Server02 computer.
-------------------------- EXAMPLE 4 --------------------------
C:\PS>invoke-command -computername Server02 -scriptblock {$p = get-process powershell}
C:\PS> invoke-command -computername Server02 -scriptblock {$p.virtualmemorysize}
C:\PS>
C:\PS> $s = new-pssession -computername Server02
C:\PS> invoke-command -session $s -scriptblock {$p = get-process powershell}
C:\PS> invoke-command -session $s -scriptblock {$p.virtualmemorysize}
17930240
Description
This example compares the effects of using ComputerName and Session parameters of Invoke-Command. It shows how to u
se a session to run a series of commands that share the same data.
The first two commands use the ComputerName parameter of Invoke-Command to run commands on the Server02 remote comp
uter. The first command uses the Get-Process command to get the PowerShell process on the remote computer and to sa
ve it in the $p variable. The second command gets the value of the VirtualMemorySize property of the PowerShell pro
cess.
The first command succeeds. But, the second command fails because when you use the ComputerName parameter, Windows
PowerShell creates a connection just to run the command. Then, it closes the connection when the command is complet
e. The $p variable was created in one connection, but it does not exist in the connection created for the second co
mmand.
The problem is solved by creating a session (a persistent connection) on the remote computer and by running both of
the related commands in the same session.
The third command uses the New-PSSession cmdlet to create a session on the Server02 computer. Then it saves the ses
sion in the $s variable. The fourth and fifth commands repeat the series of commands used in the first set, but in
this case, the Invoke-Command command uses the Session parameter to run both of the commands in the same session.
In this case, because both commands run in the same session, the commands succeed, and the $p value remains active
in the $s session for later use.
-------------------------- EXAMPLE 5 --------------------------
C:\PS>$command = { get-eventlog -log "windows powershell" | where {$_.message -like "*certificate*"} }
C:\PS> invoke-command -computername S1, S2 -scriptblock $command
Description
This example shows how to enter a command that is saved in a local variable.
When the entire command is saved in a local variable, you can specify the variable as the value of the ScriptBlock
parameter. You do not have to use the "param" keyword or the ArgumentList variable to submit the value of the local
variable.
The first command saves a Get-Eventlog command in the $command variable. The command is formatted as a script block
The second command uses the Invoke-Command cmdlet to run the command in $command on the S1 and S2 remote computers.
-------------------------- EXAMPLE 6 --------------------------
C:\PS>invoke-command -computername server01, server02, TST-0143, localhost -configurationname MySession.PowerShell
-scriptblock {get-eventlog "windows powershell"}
Description
This example demonstrates how to use the Invoke-Command cmdlet to run a single command on multiple computers.
The command uses the ComputerName parameter to specify the computers. The computer names are presented in a comma-s
eparated list. The list of computers includes the "localhost" value, which represents the local computer.
The command uses the ConfigurationName parameter to specify an alternate session configuration for Windows PowerShe
ll and the ScriptBlock parameter to specify the command.
In this example, the command in the script block gets the events in the Windows PowerShell event log on each remote
computer.
-------------------------- EXAMPLE 7 --------------------------
C:\PS>$version = invoke-command -computername (get-content machines.txt) -scriptblock {(get-host).version}
Description
This command gets the version of the Windows PowerShell host running on 200 remote computers.
Because only one command is run, it is not necessary to create persistent connections (sessions) to each of the com
puters. Instead, the command uses the ComputerName parameter to indicate the computers.
The command uses the Invoke-Command cmdlet to run a Get-Host command. It uses dot notation to get the Version prope
rty of the Windows PowerShell host.
To specify the computers, it uses the Get-Content cmdlet to get the contents of the Machine.txt file, a file of com
puter names.
These commands run synchronously (one at a time). When the commands complete, the output of the commands from all o
f the computers is saved in the $version variable. The output includes the name of the computer from which the data
originated.
-------------------------- EXAMPLE 8 --------------------------
C:\PS>$s = new-pssession -computername Server01, Server02
C:\PS> invoke-command -session $s -scriptblock {get-eventlog system} -AsJob
Id Name State HasMoreData Location Command
1 Job1 Running True Server01,Server02 get-eventlog system
C:\PS> $j = Get-Job
C:\PS> $j | format-list -property *
HasMoreData : True
StatusMessage :
Location : Server01,Server02
Command : get-eventlog system
JobStateInfo : Running
Finished : System.Threading.ManualResetEvent
InstanceId : e124bb59-8cb2-498b-a0d2-2e07d4e030ca
Id : 1
Name : Job1
ChildJobs : {Job2, Job3}
Output : {}
Error : {}
Progress : {}
Verbose : {}
Debug : {}
Warning : {}
StateChanged :
C:\PS> $results = $j | Receive-Job
Description
These commands run a background job on two remote computers. Because the Invoke-Command command uses the AsJob para
meter, the commands run on the remote computers, but the job actually resides on the local computer and the results
are transmitted to the local computer.
The first command uses the New-PSSession cmdlet to create sessions on the Server01 and Server02 remote computers.
The second command uses the Invoke-Command cmdlet to run a background job in each of the sessions. The command uses
the AsJob parameter to run the command as a background job. This command returns a job object that contains two ch
ild job objects, one for each of the jobs run on the two remote computers.
The third command uses a Get-Job command to save the job object in the $j variable.
The fourth command uses a pipeline operator (|) to send the value of the $j variable to the Format-List cmdlet, whi
ch displays all properties of the job object in a list.
The fifth command gets the results of the jobs. It pipes the job object in $j to the Receive-Job cmdlet and stores
the results in the $results variable.
-------------------------- EXAMPLE 9 --------------------------
C:\PS>$MWFO-LOg = Microsoft-Windows-Forwarding/Operational
C:\PS> invoke-command -computername server01 -scriptblock {param($log, $num) get-eventlog -logname $log -newest $nu
m} -ArgumentList $MWFO-log, 10
Description
This example shows how to include the values of local variables in a command run on a remote computer.
The first command saves the name of the Microsoft-Windows-Forwarding/Operational event log in the $MWFO-Log variabl
e.
The second command uses the Invoke-Command cmdlet to run a Get-EventLog command on the Server01 remote computer tha
t gets the 10 newest events from the Microsoft-Windows-Forwarding/Operational event log on Server01.
This command uses the "param" keyword to create two variables, $log and $num, that are used as placeholders in the
Get-EventLog command. These placeholders have arbitrary names that do not need to match the names of the local vari
ables that supply their values.
The values of the ArgumentList parameter demonstrate the two different ways to specify values in the argument list.
The value of the $log placeholder is the $MFWO-Log variable, which is defined in the first command. The value of t
he $num variable is 10.
Before the command is sent to the remote computer, the variables are replaced with the specified values.
-------------------------- EXAMPLE 10 --------------------------
C:\PS>invoke-command -computername S1, S2 -scriptblock {get-process powershell}
PSComputerName Handles NPM(K) PM(K) WS(K) VM(M) CPU(s) Id ProcessName
S1 575 15 45100 40988 200 4.68 1392 powershell
S2 777 14 35100 30988 150 3.68 67 powershell
C:\PS> invoke-command -computername S1, S2 -scriptblock {get-process powershell} -HideComputerName
Handles NPM(K) PM(K) WS(K) VM(M) CPU(s) Id ProcessName
575 15 45100 40988 200 4.68 1392 powershell
777 14 35100 30988 150 3.68 67 powershell
Description
This example shows the effect of using the HideComputerName parameter of Invoke-Command.
The first two commands use the Invoke-Command cmdlet to run a Get-Process command for the PowerShell process. The o
utput of the first command includes the PsComputerName property, which contains the name of the computer on which t
he command ran. The output of the second command, which uses the HideComputerName parameter, does not include the P
sComputerName column.
Using the HideComputerName parameter does not change the object. You can still use the Format cmdlets to display th
e PsComputerName property of any of the affected objects.
-------------------------- EXAMPLE 11 --------------------------
C:\PS>invoke-command -comp (get-content servers.txt) -filepath c:\scripts\sample.ps1 -argumentlist Process, Service
Description
This example uses the Invoke-Command cmdlet to run the Sample.ps1 script on all of the computers listed in the Serv
ers.txt file. The command uses the FilePath parameter to specify the script file. This command allows you to run th
e script on the remote computers, even if the script file is not accessible to the remote computers.
When you submit the command, the content of the Sample.ps1 file is copied into a script block and the script block
is run on each of the remote computers. This procedure is equivalent to using the ScriptBlock parameter to submit t
he contents of the script.
-------------------------- EXAMPLE 12 --------------------------
C:\PS>$LiveCred = Get-Credential
C:\PS> Invoke-Command -ConfigurationName Microsoft.Exchange `
-ConnectionUri https://ps.exchangelabs.com/powershell `
-Credential $LiveCred -Authentication Basic `
-scriptblock {Invoke-Command {Set-Mailbox dan -DisplayName "Dan Park"}
Description
This example shows how to run a command on a remote computer that is identified by a URI (Internet address). This p
articular example runs a Set-Mailbox command on a remote Exchange server. The backtick (`) in the command is the Wi
ndows PowerShell continuation character.
The first command uses the Get-Credential cmdlet to store Windows Live ID credentials in the $LiveCred variab the c
redentials dialog box appears, enter Windows Live ID credentials.
The second command uses the Invoke-Command cmdlet to run a Set-Mailbox command. The command uses the ConfigurationN
ame parameter to specify that the command should run in a session that uses the Microsoft.Exchange session configur
ation. The ConnectionURI parameter specifies the URL of the Exchange server endpoint.
The credential parameter specifies tle. Whenhe Windows Live credentials stored in the $LiveCred variable. The Authe
nticationMechanism parameter specifies the use of basic authentication. The ScriptBlock parameter specifies a scrip
t block that contains the command.
-------------------------- EXAMPLE 13 --------------------------
C:\PS>$max = New-PSSessionOption -MaximumRedirection 1
C:\PS> Invoke-Command -ConnectionUri https://ps.exchangelabs.com/powershell `
-scriptblock {Invoke-Command {Get-Mailbox dan} `
-AllowRedirection -SessionOption $max
Description
This command shows how to use the AllowRedirection and SessionOption parameters to manage URI redirection in a remo
te command.
The first command uses the New-PSSessionOption cmdlet to create a PSSessionOpption object that it saves in the $max
variable. The command uses the MaximumRedirection parameter to set the MaximumConnectionRedirectionCount property
of the PSSessionOption object to 1.
The second command uses the Invoke-Command cmdlet to run a Get-Mailbox command on a remote server running Microsoft
Exchange Server. The command uses the AllowRedirection parameter to provide explicit permission to redirect the co
nnection to an alternate endpoint. It also uses the SessionOption parameter to specify the session object in the $m
ax variable.
As a result, if the remote computer specified by the ConnectionURI parameter returns a redirection message, Windows
PowerShell will redirect the connection, but if the new destination returns another redirection message, the redir
ection count value of 1 is exceeded, and Invoke-Command returns a non-terminating error.
-------------------------- EXAMPLE 14 --------------------------
C:\PS>$so = New-PSSessionOption -SkipCACheck
PS C:\> invoke-command $s { get-hotfix } -SessionOption $so -credential server01\user01
Description
This example shows how to create and use a SessionOption parameter.
The first command uses the New-PSSessionOption cmdlet to create a session option. It saves the resulting SessionOpt
ion object in the $so parameter.
The second command uses the Invoke-Command cmdlet to run a Get-Hotfix command remotely. The value of the SessionOpt
ion parameter is the SessionOption object in the $so variable.
-------------------------- EXAMPLE 15 --------------------------
C:\PS>enable-wsmanCredSSP -delegate server02
C:\PS> connect-wsman Server02
C:\PS> set-item wsman:\server02*\service\auth\credSSP -value $true
C:\PS> $s = new-pssession server02
C:\PS> invoke-command -session $s -script {get-item \\Net03\Scripts\LogFiles.ps1} -authentication credssp -credenti
al domain01\admin01
Description
This example shows how to access a network share from within a remote session.
The command requires that CredSSP delegation be enabled in the client settings on the local computer and in the ser
vice settings on the remote computer. To run the commands in this example, you must be a member of the Administrato
rs group on the local computer and the remote computer.
The first command uses the Enable-WSManCredSSP cmdlet to enable CredSSP delegation from the Server01 local computer
to the Server02 remote computer. This configures the CredSSP client setting on the local computer.
The second command uses the Connect-WSman cmdlet to connect to the Server02 computer. This action adds a node for t
he Server02 computer to the WSMan: drive on the local computer, allowing you to view and change the WS-Management s
ettings on the Server02 computer.
The third command uses the Set-Item cmdlet to change the value of the CredSSP item in the Service node of the Serve
r02 computer to True. This action enables CredSSP in the service settings on the remote computer.
The fourth command uses the New-PSSession cmdlet to create a PSSession on the Server02 computer. It saves the PSSes
sion in the $s variable.
The fifth command uses the Invoke-Command cmdlet to run a Get-Item command in the session in $s that gets a script
from the Net03\Scripts network share. The command uses the Credential parameter and it uses the Authentication para
meter with a value of CredSSP.
I suggest spending som etime learning the basics. It will save you a lot of frustration in the future.
¯\_(ツ)_/¯

How to run a script on Oracle server from isqlplus

Hi I am trying to run a script on my workstation from Oracle server through isqlplus workarea. I entered following command and get the following error. i have enabled isqlplus URL by editing web.xml file already. Can please someone help how to run the script?
@http://myaixserver.com:5560/scripts/Databasestartupstages.sql;
SP2-0920: HTTP error 'page not found (505)' on attempt to open URL

So far, you haven't specified your rdbms version and isqlplus behaved differently on a 9iR1, 9iR2 from the one release on 10gR1/R2. on 9i it was a servlet based on a JServ servlet executor machine, meanwhile on 10g it is a J2EE compliant application deployed on an OC4J container, so configuration is different.
You may want to take a look at these references -->
* Starting iSQL*Plus from a URL
* Creating Reports using iSQL*Plus
~ Madrid

How to run a script from Calculation Manager

Hi All,
I would like to know how to run a script made by using Calculation Manager. I have converted a simple rule script which has just one statement(HS.EXP "A#Sales = 100") in "Sub Calculate()" by using FMRulesMigrator.exe and then imported, deployed to an application. when I execute "Calculate" from a Data Grid, the rule didn't take effect to application data. If I load the script by using classic rule editor, it works fine.
Is there anything I have to know to run a rule script which is made by using Calculation Manager?
Thanks in advance.
CY.

Hi,
Refer the following the link for calling logic from new custom buttons using VBA.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f085dd92-a40c-2c10-dcb1-a7c24476b23a
hpe this ll help.
thnks.

How to create the log file in remote system using log4j.

Hi,
How to create the log file in remote system using log4j. please give me a sample code or related links.The below example i used for create the log file in remote system but it return the below exception.Is there any authandication parameter for accessing the remote path? Please help.
public class Logging
Logger log=null;
FileAppender fileapp=null;
public Logging(String classname)
try
log = Logger.getLogger(classname);
String path=" [\\192.168.0.14\\c$\\LOG\\d9\\May_08_2008_log.txt|file://\\192.168.0.14\\c$\\LOG\\d9\\May_08_2008_log.txt]";
fileapp = new FileAppender(new PatternLayout("%r [%t] %-5p %c %x - %m%n"),path, true);
log.addAppender(fileapp);
log.info("Logger initilized");
}catch(Exception ex)
ex.printStackTrace();
java.io.FileNotFoundException: \\192.168.0.14\c$\LOG\d9\May_08_2008_log.txt (The network path was not found)
at java.io.FileOutputStream.openAppend(Native Method)
at java.io.FileOutputStream.<init>(Unknown Source)
at java.io.FileOutputStream.<init>(Unknown Source)
at org.apache.log4j.FileAppender.setFile(FileAppender.java:290)
at org.apache.log4j.FileAppender.<init>(FileAppender.java:109)
at annwyn.logger.BioCapLogger.<init>(Logging.java:23)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Please help.
Thanks in advance.
Saravanan.K

Sorry path is missing for the above request.
path="\\192.168.0.14\c$\LOG\d9\May_08_2008_log.txt ";
please help.
Saravanan.K

How to run a JAR file in Unix system?

hi there
ca anyone tell me how to run a JAR file in unix system or X window, thank you

You want to create an executable JAR file? You do it in the following way.
Create a manifest file such as manif.txt and the contents should contain
Main-Class: foo
assuming foo is the name of your main class. Then create the jar as follows
jar cvfm foo.jar manif.txt foo.class
I hope that helps you!
you can find more info here http://java.sun.com/docs/books/tutorial/jar/

How to call an EXE file on a remote system from SAP system?

Hi Friends,
I want to execute an EXE file existing on the remote system from SAP system. Could some one give me an idea of how to execute that?
Thanx in advance,
Ram

Hi Ram,
Try this
SXPG_COMMAND_EXECUTE
Reward if this helps,
Satish

How to boot only one group in remote machine from master machine

Hi,
I want to know the command to boot entire remote machine from master machine and how to boot only one group for remote machine from master machine.
Thanks
Amit

You can boot the entire remote machine (after booting the Master machine) as follows:
tmboot -B <lmid of remote machine> -l <lmid of remote machine>.
For all the available tmboot options see http://download.oracle.com/docs/cd/E18050_01/tuxedo/docs11gr1/rfcm/rfcmd.html#wp1032112
Regards,
Malcolm.

How to export All computer list with operating system from AD and all attributes like disable or enable and OU location also?

how to export All computer list with operating system from AD and all attributes like disable or enable and OU location also?
I have tried with dsquery below but status is not showing there.
dsquery * -filter "(objectCategory=computer)" -attr name operatingSystem

last logon user name - not really stored (or lined) with computer object. However, you can get this info during the logon process or from the computer. Here is method:
http://portal.sivarajan.com/2010/07/user-profile-and-os-info-powershell.html
Santhosh Sivarajan | Houston, TX | www.sivarajan.com
ITIL,MCITP,MCTS,MCSE (W2K3/W2K/NT4),MCSA(W2K3/W2K/MSG),Network+,CCNA
Windows Server 2012 Book - Migrating from 2008 to Windows Server 2012
Blogs: Blogs
Twitter: Twitter
LinkedIn: LinkedIn
Facebook: Facebook
Microsoft Virtual Academy:
Microsoft Virtual Academy
This posting is provided AS IS with no warranties, and confers no rights.

Applescript: How to run a script once upon logon for multiple users

I'm deploying a NetRestore image to about 150 Macs which will be using Active Directory and I've designed a custom default user for each new user. However, our system requires a specialized certificate that has to be installed on the local login.keychain for each user otherwise network connectivity is impacted.
I've tried to use the security command through Terminal to install the certificate, but no matter what combination of commands, I cannot seem to get that to work properly even with an already-created user. While it will often say it's installed, the cert will not actually show up in the login keychain in Keychain Access. And the network connectivity is still impacted.
So instead, I created a brief AppleScript that just gives the user brief instructions to click "Add" on the prompt for which Keychain to add the cert and then "Always Trust" for the "This cert is not verified" prompt. Then it launches Keychain Access. Originally, I was going to have it actually click the buttons for the user, but I realized trying to get the whole Accessibility apps and assitive devices to work on every new user would be a nightmare.
I created the script on another 10.9 Mac using Automator to make it an actual application. I've used the instructions in OS X: Using AppleScript with Accessibility and Security features in Mavericks to sign it and I'm using root to move it from its network location into the Applications folder. I've adjusted the permissions to allow all Admin users to r/w (along with everyone else). To the root user, it shows as a usable application, but every other user on the Mac sees it as damaged/incomplete.
What I want to do is add it to the default Login Items, so I can run the final AppleScript command to simply remove the login items listing. That way I don't need to worry about it running again, but it's still available for the next user to sign onto the deployed Mac.
I know it's a little convoluted, but this is the final piece to the NetRestore deployment I've been working on for months. Any suggestions on how to make this work (or even a completely different solution) would be greatly appreciated.
Here was the original shell script in case you're curious.
#!/bin/bash
## Prompt for current user admin for use in Certificate Install
while :; do # Loop until valid input is entered or Cancel is pressed.
    localpass=$(osascript -e 'Tell application "System Events" to display dialog "Enter your password for Lync Setup:" default answer "" with hidden answer' -e 'text returned of result' 2>/dev/null)
    if (( $? )); then exit 1; fi # Abort, if user pressed Cancel.
    localpass=$(echo -n "$localpass" | sed 's/^ *//' | sed 's/ *$//') # Trim leading and trailing whitespace.
    if [[ -z "$localpass" ]]; then
        # The user left the password field blank.
        osascript -e 'Tell application "System Events" to display alert "You must enter the local user password; please try again." as warning' >/dev/null
        # Continue loop to prompt again.
    else
        # Valid input: exit loop and continue.
        break
    fi
done
echo $localpass | sudo security import /'StartupFiles'/bn-virtual.crt ~/Library/Keychain/login.keychain
osascript -e 'tell Application "System Events" to delete every login item whose name is "LyncCert"
And this is the AppleScript itself. (I used the \ to make it easier to read. The first line is actually one complete command)
display dialog "Click OK to start installing Mac Network Certificate." & return & return & \
"In the following prompts, click the 'Add' then 'Always Trust'." & return & return & \
After you have clicked 'Always Trust', quit Keychain Access." default button 1 with title \
"Mac Network Certificate Install"
activate application "Keychain Access"
tell application "Finder" to open POSIX file "/StartupFiles/bn-virtualcar.crt"
tell application "System Events" to delete login item "Lync-AppleScript"
end
Thank you for your help!

I have run into this same issue. Are you trying to run the script one time as a new user logs in or everytime a user logs in?

How to run multiple scripts in sql*plus?

I would like to run 2 scripts in sql*plus, how do I do this? I tried the following, but it won't run.
create table student_new
AS
select *
from student
insert into student_new
(last_name, first_name
values
(Crop, Jenny)
The above are the two scripts I want to run, what am I doing wrong.
Thanks

Do you have a solution to run multiple scripts continuosly, one after the other as one script.
Say I have file1.sql file2.sql, file3.sql.
I want to create a script run.sql, where this will run file1.sql,file2.sql,file3.sql one after other without any one running one after the other like follows:
run.sql should have
begin
@file1.sql
@file2.sql
@file3.sql
dbms_output.put_line(select sysdate from dual);
end;
If I run run.sql all the three scripts should be executed successfully and then display the current time . All these files have update statements(50,000 updates each file).
Very urgetn. Can some one hlpe, please.
Thanks in advance.

How to run Powershell script (function) through Windows Task Schduler ??

Hello All,
i have Powershell script which is created as a function. I have to give parameters to run the script. And it is working fine. Now i want to run this script through windows task scheduler but it is not working. I dont know how to call powershell function
through task scheduler.
From command line i run it like this:
. c:\script\Get-ServiceStatusReport.ps1
dir function:get-service*
Get-ServiceStatusReport -ComputerList C:\script\server.txt -includeService "Exchange","W32Time" -To [email protected] -From [email protected] -SMTPMail mail01.xxx.gov.pk
In windows Task scheduler I am giving this: it runs but i dont receive any output :
Program/Script:
C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
Parameter:
-file ". 'Get-ServiceStatusReport.ps1 -ComputerList C:\script\server.txt -includeService "Exchange","W32Time" -To [email protected] -From [email protected] -SMTPMail mail01.xxx.gov.pk'"
Please HELP !!!

Thanks for the reply:
The script is already saved as Get-ServiceStatusReport.ps1 .
On powershell it does not run like .\Get-ServiceStatusReport.ps1 (parameter).
But i have to call it as function:
Like this:
Get-ServiceStatusReport -ComputerList C:\script\server.txt -includeService "Exchange","W32Time" -To [email protected] -From [email protected] -SMTPMail mail01.xxx.gov.pk
As you said:
I tried to run it like this:
Program/Script:
C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
Parameter:
-file "c:\script\Get-ServiceStatusReport.ps1 -ComputerList C:\script\server.txt -includeService "Exchange","W32Time" -To [email protected] -From [email protected] -SMTPMail mail01.xxx.gov.pk'"
But its not working , on scheduler its giving error: (0xFFFD0000)
Please HELP !!!
WHOLE SCRIPT:
function Get-ServiceStatusReport
param(
[String]$ComputerList,[String[]]$includeService,[String]$To,[String]$From,[string]$SMTPMail
$script:list = $ComputerList
$ServiceFileName= "c:\ServiceFileName.htm"
New-Item -ItemType file $ServiceFilename -Force
# Function to write the HTML Header to the file
Function writeHtmlHeader
param($fileName)
$date = ( get-date ).ToString('yyyy/MM/dd')
Add-Content $fileName "<html>"
Add-Content $fileName "<head>"
Add-Content $fileName "<meta http-equiv='Content-Type' content='text/html; charset=iso-8859-1'>"
Add-Content $fileName '<title>Service Status Report </title>'
add-content $fileName '<STYLE TYPE="text/css">'
add-content $fileName ""
add-content $fileName "</style>"
Add-Content $fileName "</head>"
Add-Content $fileName "<body>"
add-content $fileName "<table width='100%'>"
add-content $fileName "<tr bgcolor='#CCCCCC'>"
add-content $fileName "<td colspan='4' height='25' align='center'>"
add-content $fileName "<font face='tahoma' color='#003399' size='4'><strong>Service Stauts Report - $date</strong></font>"
add-content $fileName "</td>"
add-content $fileName "</tr>"
add-content $fileName "</table>"
# Function to write the HTML Header to the file
Function writeTableHeader
param($fileName)
Add-Content $fileName "<tr bgcolor=#CCCCCC>"
Add-Content $fileName "<td width='10%' align='center'>ServerName</td>"
Add-Content $fileName "<td width='50%' align='center'>Service Name</td>"
Add-Content $fileName "<td width='10%' align='center'>status</td>"
Add-Content $fileName "</tr>"
Function writeHtmlFooter
param($fileName)
Add-Content $fileName "</body>"
Add-Content $fileName "</html>"
Function writeDiskInfo
param($filename,$Servername,$name,$Status)
if( $status -eq "Stopped")
Add-Content $fileName "<tr>"
Add-Content $fileName "<td bgcolor='#FF0000' align=left ><b>$servername</td>"
Add-Content $fileName "<td bgcolor='#FF0000' align=left ><b>$name</td>"
Add-Content $fileName "<td bgcolor='#FF0000' align=left ><b>$Status</td>"
Add-Content $fileName "</tr>"
else
Add-Content $fileName "<tr>"
Add-Content $fileName "<td >$servername</td>"
Add-Content $fileName "<td >$name</td>"
Add-Content $fileName "<td >$Status</td>"
Add-Content $fileName "</tr>"
writeHtmlHeader $ServiceFileName
Add-Content $ServiceFileName "<table width='100%'><tbody>"
Add-Content $ServiceFileName "<tr bgcolor='#CCCCCC'>"
Add-Content $ServiceFileName "<td width='100%' align='center' colSpan=3><font face='tahoma' color='#003399' size='2'><strong> Service Details</strong></font></td>"
Add-Content $ServiceFileName "</tr>"
writeTableHeader $ServiceFileName
#Change value of the following parameter as needed
$InlcudeArray=@()
#List of programs to exclude
#$InlcudeArray = $inlcudeService
Foreach($ServerName in (Get-Content $script:list))
$service = Get-Service -ComputerName $servername
if ($Service -ne $NULL)
foreach ($item in $service)
#$item.DisplayName
Foreach($include in $includeService)
write-host $inlcude
if(($item.serviceName).Contains($include) -eq $TRUE)
Write-Host $item.MachineName $item.name $item.Status
writeDiskInfo $ServiceFileName $item.MachineName $item.name $item.Status
Add-Content $ServiceFileName "</table>"
writeHtmlFooter $ServiceFileName
function Validate-IsEmail ([string]$Email)
return $Email -match "^(?("")("".+?""@)|(([0-9a-zA-Z]((\.(?!\.))|[-!#\$%&'\*\+/=\?\^`\{\}\|~\w])*)(?<=[0-9a-zA-Z])@))(?(\[)(\[(\d{1,3}\.){3}\d{1,3}\])|(([0-9a-zA-Z][-\w]*[0-9a-zA-Z]\.)+[a-zA-Z]{2,6}))$"
Function sendEmail
param($from,$to,$subject,$smtphost,$htmlFileName)
[string]$receipients="$to"
$body = Get-Content $htmlFileName
$body = New-Object System.Net.Mail.MailMessage $from, $receipients, $subject, $body
$body.isBodyhtml = $true
$smtpServer = $MailServer
$smtp = new-object Net.Mail.SmtpClient($smtphost)
$validfrom= Validate-IsEmail $from
if($validfrom -eq $TRUE)
$validTo= Validate-IsEmail $to
if($validTo -eq $TRUE)
$smtp.UseDefaultCredentials = $true;
$smtp.Send($body)
write-output "Email Sent!!"
else
write-output "Invalid entries, Try again!!"
$date = ( get-date ).ToString('yyyy/MM/dd')
sendEmail -from $From -to $to -subject "Service Status - $Date" -smtphost $SMTPMail -htmlfilename $ServiceFilename

Reg: How to Run a Script File in WebLogic Server 10.3.3

Hi WebLogic Experts,
In our project we are using WebLogic Serve 10.3.3. I need to run one script file. could you please suggest me where should i need to place that script file in WebLogic Server 10.3.3 and How to run & stop that Script file.?
please experts i waiting for your's reply..
Thanks & Regards,
Induja..

1. You can put a command line into startWebLogic.sh to start your script file.
2. In your proyect you can create a java class to run the script file.
3. You can create a java class to run the script file an setup it like a startup class into weblogic server.
4. You can create a java class to run the script file an setup it like a job scheduler into weblogic server.
In what time you need run this script file?

How to Run 2 Scripts simultaneously:PlayQuicktimeMovieWhileSpeechRecognitio

Basicallly i want to make an interactive game using QT movies and Speechrecognition to control what happens, loading different video clips, changing the speed of the movie while it's playing, playing sounds according to what happens.
So i don't know if i need 2 or 3 scripts runing simultaneously.
But anyways, how would you do it?
Do you need to have one parent script? And if so, how would you do it.. how do you run child scripts within the parent script
This is my basic idea , will it work:
PARENT SCRIPT
-Set GameALIVE to true
Repeat while GameALIVE is true
run GAMESPEECHRECOGNITIONScriptTHat just listens for commands
run Script that plays and controls QT Movies based on what the GAMESPEECHRECOGNITION script gets as input
end true
END PARENT SCRIPT
That's my idea but i have no clue how to do it

I've been waiting for a dualhead2go DP edition too. Arrived today. Just playing with it.
I'd hand on for the Dualhead2Go, that is if you haven't got it already. It's a really nice bit of kit. I'm currently running an inbuilt display and two samsung T260 with resolutions of 1920 by 1200 each as well as the inbuilt display. I haven't yet tried switching to the lower spec graphics card in my MBP but with this one it is working beautifully. I can't imagine a USB external graphics card being anywhere near as good.

How to run TestStand script on a remote system from a TestStand script?

Similar Messages

Maybe you are looking for