How to run vi on startup

Hello,
How can I run my VI immediately on startup without any user action?
BR,
Jick
Solved!
Go to Solution.

You mean on start-up of your computer?
Then you can use a bat-file that calls LabVIEW with the vi-path as parameter. Propably you need to add an delay (ping) to wait until all services are started. Then add this bat to the autostart folder.
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml

Similar Messages

How do I automatically save running config onto startup config?

When I configure onto a router, the configurations are stored in running configuration and it requires for me to run "wr" command to store running configurations onto startup configuration. Thus, this enables the configurations to be retained even after router restart.
Is there any mechanism, wherein any configuration that I do on the router, should by default be written onto startup configuration, without me explicitly invoking the "wr" command every time.

Hi,
As mentioned, there are several ways to do a periodic backup. You have commands that range from two lines to several lines. I use the following to do a write mem every 6 hours daily.
kron occurrence daily1 at 00:00 recurring
policy-list save-config
kron occurrence daily2 at 06:00 recurring
policy-list save-config
kron occurrence daily3 at 12:00 recurring
policy-list save-config
kron occurrence daily4 at 18:00 recurring
policy-list save-config
kron policy-list save-config
cli write memory
If you want to do a write mem every one hour, You can use the following commands
event manager applet WR_Conf
event timer cron name WR_Conf cron-entry " 25 * * * *"
action 1.0 cli command "enable"
action 1.1 cli command "wr"
action 1.2 syslog msg "Config has been saved by EEM script"
Thanks,

How to run JRE from an external USB disk

Hi
I wanted to put up a tomcat servlet engine that could run from a USB harddisk without any previous installment on the host machine. The OS of the host machine would be windows 2000.
My first question would be; is that possible ?
I think that when i install JRE environment on some w2k machine som registry stuff is created. And my problem here would be, how to run the java without any registry updates and directly from the USB stick that i insert into the machine.
And my second would be; what should i install of java on the USB to make this work?
Grateful for any input on this, or any pointers.
Best regards
Abid

You would need the whole JRE on the media, and I would also assume the the full SDK/JDK as many servlet containers use the SDK's java compiler if you're doing JSPs.
You would then simply install your servlet container and your .war files. Now I believe that registry settings are not mandatory but one must ensure the PATH, JAVA_HOME, and CLASSPATH environment variables are set accordingly, thus a startup script (.bat/.cmd) would be necessary to create the OS environment, spawn the JRE and in turn invoke the servlet container.
I've never done this with tomcat, but I've done very similar things with Jetty FYI.

URGENT:PLEASE TELL ME HOW TO RUN BOTH "ITEXT & MYFACES1.0" TOGETHER?

URGENT: HELP PLEASE. ITEXT AND MYFACES1.0.9 COMBINATION USE BLOCKS THE PDF GENERATED ITEXT.
We are using ITEXT for PDF report generation in JSF web appliaction, We needed to implement the Fileupload, we tried both MYFACES1.0.9 and TOMAHAWK, both ways we also got the file uploading working. For this we needed to add the filter in the web.xml file ( <filter-name>ExtensionsFilter</filter-name> as below). NOW by doing this, it BLOCKS THE PDF OUTPUT OF THE ITEXT and the result in sumthing like corrupted PDF is spitted in the browser (%PDF-1.4 %Ã¢Ã£Ã Ã 2 0 obj <>stream Ã¿ÃÃ¿Ã JFIFï¿½ ï¿½`ï¿½`ï¿½ï¿................................................)
When i remove the MYFACES1.0.9 only then the good PDF output is viewable in the BROWSER.
PLEASE TELL ME HOW TO RUN BOTH ITEXT(for pdf report) and MYFACES1.0.9 (for fileuploading) TOGETHER?????
========================
<?xml version = '1.0' encoding = 'windows-1252'?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd" version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee">
<description>Empty web.xml file for Web Application</description>
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>*.faces</url-pattern>
</servlet-mapping>
<session-config>
<session-timeout>35</session-timeout>
</session-config>
<mime-mapping>
<extension>html</extension>
<mime-type>text/html</mime-type>
</mime-mapping>
<mime-mapping>
<extension>txt</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
<filter>
<filter-name>ExtensionsFilter</filter-name>
<filter-class>
org.apache.myfaces.component.html.util.ExtensionsFilter
</filter-class>
<init-param>
<param-name>uploadMaxFileSize</param-name>
<param-value>10m</param-value>
</init-param>
<init-param>
<param-name>uploadThresholdSize</param-name>
<param-value>100k</param-value>
</init-param>
</filter>
<filter-mapping>
<filter-name>ExtensionsFilter</filter-name>
<servlet-name>Faces Servlet</servlet-name>
</filter-mapping>
</web-app>
========================

calm down!
You always have the option of dumping the file uploading component and just using the Apache FileUpload API in a servlet - then you'll have full control over what happens when without any additional configuration needed.

How to run a spool program in unix environment within a shell script

Hi
I have written a spool program , which i run from SQL * PLUS
using
@'path of the spool file having extension .sql'
Now i want to include this spool program within the shell script , please help me , how to do it.
Thanks in advance ..

user8703472 wrote:
Thank You Sir for the reply .
#!/bin/ksh
ORACLE_SID=<SID>; export ORACLE_SID
ORACLE_HOME=<ORACLE_HOME>; export ORACLE_HOME
$sqlplus / as sysdba <<-EOFSQL1 >> output.log 2>&1
spool /tmp/a.log
select * from v\$instance
spool off;
EOFSQL1
Please explain me this statement $sqlplus / as sysdba
and also what a.log contains .
i have the user id and password for the DB.
should i write something like this
$sqlplus -Uusername -Ppassword -Sservername
i know how to run a procedure from isql(sybase DB)
Ahh.... but oracle is not just sybase under a different name.
It would be a good investment in your career to go to tahiti.oracle.com. Drill down to your product and version. There you will find the complete doc library.
You should spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there. Learning where to look things up in the documentation is time well spent on your career.
For your immediate task, spend a few minutes looking through the SQLPlus User Guide and Reference.
Then set yourself a plan to dig deeper.
- Read a chapter a day from the Concepts Manual.
- Look in your alert log and find all the non-default initialization parms listed at instance startup. Then read up on each one of them in the Reference Manual. Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files, then bounce what you see there in the network administrators manual.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
But this project , i need to run the spool program from with in a shell script .We see what you mean, but the term "spool program" has no meaning in Oracle and only serves to cloud the issue. I know you are used to using this term with other products, but "When in Rome ...."
>
Thank You in advance ..

How do I disable Fennec startup cmd window?

Hi,
When you run Fennec windows version everytime, you should see a cmd window startup first then Fennec browser popup. How do I disable Fennec startup cmd window and just lunch Fennec browser?
Thanks,
Newmore

This is expected. The desktop version is for developers to test the code without needing an Android device in front of them.

How do i disable the startup splash screen in elements 9

How do i disable the startup splash screen in elements 9

Try making a direct shortcut for the Organizer and Editor. Make sure you have the correct file path as there is more than one exe file. You can then launch the programs directly from the desktop bypassing the welcome screen. This is generally better as the welcome screen leaves background processes running.
On Windows, Right click anywhere on the desktop and select New >> Shortcut
Then click the browse button and navigate to:
"C:\Program Files\Adobe\Elements 9 Organizer\PhotoshopElementsOrganizer.exe"
Then click Next; then click Finish
Then make a direct shortcut for the Editor in a similar manner.
On Windows, Right click anywhere on the desktop and select New >> Shortcut
Then click the browse button and navigate to:
"C:\Program Files\Adobe\Photoshop Elements 9\PhotoshopElementsEditor.exe"
Then click Next; then click Finish
N.B. on 64 bit systems navigate to Program Files (x86)

How to run servlet by using main?

How can I use main to run servlet?
I cannot put request and response object into doGet(request, response) method
I want this because I want to run this servlet daily and I plan to put it in cron job
Calvin

Hi
Perhaps you cannot run servlet without using browser. But you can make that program as an application in order to run in Dos or Unix shell.
But still you can run servlet without using browser How?
You can debug servlets with the same jdb commands you use to debug an applet or an application. The JavaTM Servlet Development Kit (JSDK) provides a standalone program
called servletrunner that lets you run a servlet without a web browser. On most systems, this program simply runs the java sun.servlet.http.HttpServer command. You
can, therefore, start a jdb session with the HttpServer class.
A key point to remember when debugging servlets is that Java Web server and servletrunner achieve servlet loading and unloading by not including the servlets directory on
the CLASSPATH. This means the servlets are loaded using a custom classloader and not the default system classloader.
Running servletrunner in Debug Mode
Running Java Web ServerTM in Debug Mode
Running servletrunner in Debug Mode
In this example, the servlets examples directory is included on the CLASSPATH. You can configure the CLASSPATH for debug mode as follows:
Unix
$ export CLASSPATH=./lib/jsdk.jar:./examples:$CLASSPATH
Windows
$ set CLASSPATH=lib\jsdk.jar;examples;%classpath%
To start the servletrunner program you can either run the supplied startup script called servletrunner or just supply the servletrunner classes as a parameter to jdb. This
example uses the parameter to servletrunner.
$ jdb sun.servlet.http.HttpServer
Initializing jdb...
0xee2fa2f8:class(sun.servlet.http.HttpServer)
> stop in SnoopServlet.doGet
Breakpoint set in SnoopServlet.doGet
> run
run sun.servlet.http.HttpServer
running ...
main[1] servletrunner starting with settings:
port = 8080
backlog = 50
max handlers = 100
timeout = 5000
servlet dir = ./examples
document dir = ./examples
servlet propfile = ./examples/servlet.properties
To run SnoopServlet in debug mode, enter the following URL in a browser where yourmachine is the machine where you started servlet runner and 8080 is the port number
displayed in the settings output.
http://yourmachine:8080/servlet/SnoopServlet
In this example jdb stops at the first line of the servlet's doGet method. The browser will wait for a response from your servlet until a timeout is reached.
main[1] SnoopServlet: init
Breakpoint hit: SnoopServlet.doGet (SnoopServlet:45)
Thread-105[1]
We can use the list command to work out where jdb has stopped in the source.
Thread-105[1] list
41 throws ServletException, IOException
42 {
43 PrintWriter out;
44
45 => res.setContentType("text/html");
46 out = res.getWriter ();
47
48 out.println("<html>");
49 out.println("<head>
<title>Snoop Servlet
</title></head>");
Thread-105[1]
The servlet can continue using the cont command.
Thread-105[1] cont
Running Java Web Server in Debug Mode
The JSDK release does not contain classes available in the Java Web server and it also has its own special servlet configuration. If you cannot run your servlet from
servletrunner, then the other option is to run the Java Web server in debug mode.
To do this add the -debug flag for the first parameter after the java program. For example in the script bin/js change the JAVA line to look like the following. In releases prior
to the Java 2 platform release, you will also need to change the program pointed to by the variable $JAVA to java_g instead of java.
Before:
exec $JAVA $THREADS $JITCOMPILER $COMPILER $MS $MX \
After:
exec $JAVA -debug $THREADS $JITCOMPILER
$COMPILER $MS $MX \
Here is how to remotely connect to the Java Web Server. The agent password is generated on the standard output from the Java Web Server so it can be redirected into a file
somewhere. You can find out where by checking the Java Web Server startup scripts.
jdb -host localhost -password <the agent password>
The servlets are loaded by a separate classloader if they are contained in the servlets directory, which is not on the CLASSPATH used when starting the Java Web server.
Unfortunately, when debugging remotely with jdb, you cannot control the custom classloader and request it to load the servlet, so you have to either include the servlets
directory on the CLASSPATH for debugging or load the servlet by requesting it through a web browser and then placing a breakpoint once the servlet has run.
In this next example, the jdc.WebServer.PasswordServlet is included on the CLASSPATH when Java Web server starts. The example sets a breakpoint to stop in the service
method of this servlet, which is the main processing method of this servlet.
The Java Web Server standard output produces this message, which lets you proceed with the remote jdb session:
Agent password=3yg23k
$ jdb -host localhost -password 3yg23k
Initializing jdb...
> stop in jdc.WebServer.PasswordServlet:service
Breakpoint set in jdc.WebServer.PasswordServlet.service
> stop
Current breakpoints set:
jdc.WebServer.PasswordServlet:111
The second stop lists the current breakpoints in this session and shows the line number where the breakpoint is set. You can now call the servlet through your HTML page. In
this example, the servlet is run as a POST operation
<FORM METHOD="post" action="/servlet/PasswordServlet">
<INPUT TYPE=TEXT SIZE=15 Name="user" Value="">
<INPUT TYPE=SUBMIT Name="Submit" Value="Submit">
</FORM>
You get control of the Java Web Server thread when the breakpoint is reached, and you can continue debugging using the same techniques as used in the Remote Debugging
section.
Breakpoint hit: jdc.WebServer.PasswordServlet.service
(PasswordServlet:111) webpageservice Handler[1] where
[1] jdc.WebServer.PasswordServlet.service
(PasswordServlet:111)
[2] javax.servlet.http.HttpServlet.service
(HttpServlet:588)
[3] com.sun.server.ServletState.callService
(ServletState:204)
[4] com.sun.server.ServletManager.callServletService
(ServletManager:940)
[5] com.sun.server.http.InvokerServlet.service
(InvokerServlet:101)
A common problem when using the Java WebServer and other servlet environments is that Exceptions are thrown but are caught and handled outside the scope of your servlet.
The catch command allows you to trap all these exceptions.
webpageservice Handler[1] catch java.io.IOException
webpageservice Handler[1]
Exception: java.io.FileNotFoundException
at com.sun.server.http.FileServlet.sendResponse(
FileServlet.java:153)
at com.sun.server.http.FileServlet.service(
FileServlet.java:114)
at com.sun.server.webserver.FileServlet.service(
FileServlet.java:202)
at javax.servlet.http.HttpServlet.service(
HttpServlet.java:588)
at com.sun.server.ServletManager.callServletService(
ServletManager.java:936)
at com.sun.server.webserver.HttpServiceHandler
.handleRequest(HttpServiceHandler.java:416)
at com.sun.server.webserver.HttpServiceHandler
.handleRequest(HttpServiceHandler.java:246)
at com.sun.server.HandlerThread.run(
HandlerThread.java:154)
This simple example was generated when the file was not found, but this technique can be used for problems with posted data. Remember to use cont to allow the web server
to proceed. To clear this trap use the ignore command.
webpageservice Handler[1] ignore java.io.IOException
webpageservice Handler[1] catch
webpageservice Handler[1]
I hope this will help you.
Thanks
Bakrudeen

How to Run Jar in Background process

Hi,
I am develop one application in java,
I have some problem in my application,
whats my problem is, I want to run my jar file
in system background, that is when i was start the system
my jar gets ready to run the application,
Can any one please give some idea to how to run my jar in
background task and how to start the jar when the system
start.
Thanks in advance,
Regards,
Ganesh Kumar.L

Hi
It has been a while since you asked your question- I hope you still need the solution. Java typically does not support this because it is platform specific. I don't know what operating system you are working on. I assume Windows. There are numerous ways to do this in Windows. The easiest is to copy the program into the startup folder. The directory is: C:\Documents and Settings\All Users\Start Menu\Programs\Startup. Another way, less visible to the user, is to make an entry in the registry. If you place the location of the program as data in a key in HKLM\Software\Microsoft\Windows\Current\Version\Run of the registry, it will start with the system. This is hard to do in Java (for obvious reasons) however it is not impossible. You can use JNI which is really difficult to learn and hard to implement or you can use
Process p=Runtime.getRunTime().exec({"reg.exe","add HKLM..."});This will execute the Windows utility reg.exe with the arguments provided by the second in the array of Strings. Documentation on reg.exe can be found through the command prompt. There are other ways such as modifying Autoexec.bat however they are less reliable
Hope I helped

Reg: How to Run a Script File in WebLogic Server 10.3.3

Hi WebLogic Experts,
In our project we are using WebLogic Serve 10.3.3. I need to run one script file. could you please suggest me where should i need to place that script file in WebLogic Server 10.3.3 and How to run & stop that Script file.?
please experts i waiting for your's reply..
Thanks & Regards,
Induja..

1. You can put a command line into startWebLogic.sh to start your script file.
2. In your proyect you can create a java class to run the script file.
3. You can create a java class to run the script file an setup it like a startup class into weblogic server.
4. You can create a java class to run the script file an setup it like a job scheduler into weblogic server.
In what time you need run this script file?

How to set the JVM Startup Options?

Hi,
I want to know how to set the JVM Startup Options...
The idea is, I want to test how the remote clients can access an EJB that is running on a different machine... Remote client here means, I have a java client application that runs on one machine and that contacts an EJB thats running on a different machine... I posted this question in J2EE forum and I got this reply...
If you need to access EJB components that are residing in a remote system other than the system where the application client is being developed, set the values for the Java Virtual Machine startup options:
jvmarg value = "-Dorg.omg.CORBA.ORBInitialHost=${ORBhost}"
jvmarg value = "-Dorg.omg.CORBA.ORBInitialPort=${ORBport}"
Now how to set the JVM Startup Options? I know my server ORBHost Name and the ORBPort..
Anybody to help !!!
Thanks in advance,
Karthik

java -Dorg.omg.CORBA.ORBInitialHost=${ORBhost} -Dorg.omg.CORBA.ORBInitialPort=${ORBport} <the main class>
That should do it..

How to run Struts program with the help of tomcat

Hello Everybody
This is Adesh.I am a newcomer of java and facing a problem with struts, so if any one know how to set the path of struts and how to run struts program, so plz inform me.
THX in Advance.............................................

struts-config.xml
<struts-config>
<action-mappings>
     <action path = "/welcome"
                type = "Welcome"
                scope="session">
            <forward name="success" path=".welcome"/>
            <forward name="failure" path=".base.error"/>
     </action>
</action-mappings>
    <plug-in className="org.apache.struts.tiles.TilesPlugin">
        <set-property property="definitions-config" value="/WEB-INF/tiles-defs.xml"/>
        <set-property property="definitions-debug" value="1"/>
        <set-property property="definitions-parser-details" value="0"/>
        <set-property property="definitions-parser-validate" value="true"/>
    </plug-in>
</struts-config>tiles-defs.xml
<tiles-definitions>
     <definition name = ".base" path = "/include/template.jsp">
          <put name = "title" value = "${title}"/>
          <put name = "header" value = "/include/top.jsp"/>
          <put name = "body" value = "${body}"/>
          <put name = "footer" value = "/include/footer.jsp"/>
     </definition>
</tiles-definitions>web.xml
<servlet>
        <servlet-name>action</servlet-name>
        <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
        <init-param>
            <param-name>config</param-name>
            <param-value>/WEB-INF/struts-config.xml</param-value>
        </init-param>
<init-param>
            <param-name>definitions-config</param-name>
            <param-value>/WEB-INF/tiles-defs.xml</param-value>
        </init-param>
        <load-on-startup>1</load-on-startup>
    </servlet>
<servlet>
        <servlet-name>init</servlet-name>
        <servlet-class>Init</servlet-class>
        <load-on-startup>2</load-on-startup>
    </servlet>
    <servlet-mapping>
        <servlet-name>action</servlet-name>
        <url-pattern>*.do</url-pattern>
    </servlet-mapping>
<jsp-config>
    <taglib>
        <taglib-uri>/WEB-INF/struts-bean.tld</taglib-uri>
        <taglib-location>/WEB-INF/struts-bean.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/struts-html.tld</taglib-uri>
        <taglib-location>/WEB-INF/struts-html.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/struts-logic.tld</taglib-uri>
        <taglib-location>/WEB-INF/struts-logic.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/wall.tld</taglib-uri>
        <taglib-location>/WEB-INF/wall.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/c.tld</taglib-uri>
        <taglib-location>/WEB-INF/c.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/fn.tld</taglib-uri>
        <taglib-location>/WEB-INF/fn.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/fmt.tld</taglib-uri>
        <taglib-location>/WEB-INF/fmt.tld</taglib-location>
    </taglib>
</jsp-config>
    <resource-ref>
        <description>DB Connection</description>
        <res-ref-name>jdbc/SQLServerDB</res-ref-name>
        <res-type>javax.sql.DataSource</res-type>
        <res-auth>Container</res-auth>
    </resource-ref>
</web-app>This should help....

How to run rmiregistry each time windows starts

Can anybody tell me how to run rmiregistry each time windows starts.
I want to start my RMIserver automatically to work.First I need to start rmiregistry then I want to start my RMIServer class as windows service.

Stick a shorcut to it in your Startup folder or create a new Key in the registry @ HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
If you have arguements to rimreg (like port number) create a .bat script and use that to launch it.

How to run jakarta-Tomacat-3.2.3

jakarta-tomcat-3.2.3 is aleready installed in /root/ directory (linux)
now only i know it is for servlets.plz any one hepl me how to
run tomcat and where should store servlet programs and how to execute,run
these servlet programs
with regards!
chandra

Go to C:\jakarta-tomcat-3.2.3\bin and double click on startup.
Store your compiled servlet classes in C:\jakarta-tomcat-3.2.3\webapps\examples\WEB-INF\classes.
call the servlet like http://localhost:8080/examples/servlet/YourClassname.
You can also store the classes in other directories, but u have to set it at the server.
best of luck!!!

How to get to user startup folder in windows 7

How to get to user startup folder in windows 7

Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription. This is a standard response I’ve written up in advance to help many people (thousands, really.)
who post their question in this forum in error, but please don’t ignore it. The links I share below I’ve collected to help you get right where you need to go with your issue.
For technical issues with Microsoft products that you would run into as an
end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an
IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize! Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing.
If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you! It’s called the Where is the forum for…? forum and it’s here:
http://social.msdn.microsoft.com/forums/en-us/whatforum/
Moving to off topic.
Thanks, Mike
MSDN and TechNet Subscriptions Support

How to run vi on startup

Similar Messages

Maybe you are looking for