How to schedule a load job from bi to r3 daily ? What are the available opt
I think we can create a PC for the same so should we code an ABAP routine with include to do the process. So can it be scheduled daily, what are the other option in BI7 other than PC ?
Hi Manohar,
To make the data source Real-Time enabled you need to run a small program which updates the REALTIME flag in ROOSOURCE table. Program is as below.
report z_rda_flag.
tables : roosource.
parameters : p_oltpsr like roosource-oltpsource.
update roosource set realtime = 'X'
where oltpsource = p_oltpsr
and objvers = 'A'.
Enter the data source name in the selection screen and run the program.
Now go back to SE16 and see the contents of 0FI_GL_4 inROOSOURCE.
You can see that the program has updated REALTIME flag for the datasource 0FI_GL_4.
hope this answer solves ur issue
u can do this only for an ODs and not for a cube. will let u know if there are any other options for a cube.
assign values to the answers as its the way of thanking in SDN.
regards,
Ranjith
Similar Messages
-
I am about to change internet service providers and will be dropping two e-mail addresses that I use as Apple ID’s. One is used solely for iTunes and the other is used for iCloud, mail, calendars, etc. The second has two iCloud email address as aliases. I will be going to a new ISP and will establish an e-mail address from that ISP as a backup in case the iCloud addresses are not available.
It has been suggested to me that I should continue to use the e-mail addresses from the old ISP as my Apple ID’s. And that I use the e-mail address from the new ISP as a rescue e-mail address for those Apple ID’s to get any communications relating to the ID’s. That seems like a simple and straight-forward way of handling the change and would minimize the chance of complications from changing the Apple ID’s. But, are there any downsides to handling the change in this way? If so, what are they?You can continue to use them as Apple ID's, change the rescue address (as you know)
You can use your iCloud address, but it won't be an alias, it's a full email address. -
I am trying to up load videos that I have taken on my IPod to my photo stream. I need the videos to some how be uploaded automatically so I can get them to my PC. I have Windows 7 operating system. I cannot add the videos to the photo stream folder because I took them before I added photo stream to my IPod. I have already downloaded the icloud control panel 2.0 to my PC and have the settings set on both of the devices. I don't know if I can't upload them to photo stream or if I can use something else? Please help. My daughter takes lessons everyday and we have to be able to get them to my IPad, PC and other devices. Thank you.
Only photos can be uploaded to Photo Stream.
No videos. -
Hi
I bought a new Mac and I want to transfer my Adobe Creative Suit CS6 to it from my old one. What are the correct steps? Please note that I don't have a CD because I downloaded it via the net. It was an upgrade for the student edition. I heard something about deactivation and reactivation but I don't want to do something wrong then lose my precious software. Please help. Thanks.You can download the software and install it using the page linked below.
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You are allowed to have the software installed and activated on two machines, so there should be no reason to deactivate it on your other machine, or at least you can wait until you see it loaded and working on the new one. -
While transporting the objects from dev to q or production what are the err
Hi all,
While transporting the objects from one system to another what are the errors we get?
Thanks
Kiran KumarHi Kiran,
The purpose of the Forums is to help people with problems, not to "fish" for answers to what appear to be interview questions. There are many ways to become educated in SAP Administration, such as training classes and help documetnation. Please choose these avenues for your questions instead of making these kind of posts in the Forums.
Best Regards,
Matt -
What are the methods called while navigating from one applet to another one
Hi All,
Could any one brief me about "When you navigate from one applet to another what are the methods called ?".
Thanks in advance.
Best Regards,
N.Madhusudhanan.http://forum.java.sun.com/thread.jsp?forum=421&thread=426771&tstart=0&trange=100
-
What are the possible errors that can happen in data loads(rsmo monitor)?
hi all,
what could be the error that could result in red color in the RSMO monitor of data load transaction?
1. request everything ok
(what are the possible error type which make here red)
2. extraction everything ok
(what are the possible error type which make here red)
3. transfer (idocs and trfc) error occured?
(what are the possible error type which make here red)
4. processing
- data package
5. process chain
(what are the possible error type which make here red)
6 other messages.
(what are the possible error type which make here red)
thanks
poojaHi,
I can tell you the most common reasons of these failures.
1. request everything ok
Here it will be telling you if the request was properly send to source system and got triggered there.
2. extraction everything ok
In this step the actual extraction of data happens, issue slike sysfail or CPIC error may cause this to fail.
3. transfer (idocs and trfc) error occured?
When extraction is complete and data is being send to BW. But if dur to some reason it fails, error may come here.
4. processing
Processing in BW fails for each data packet is displayed here.
This can also happen when you have sysfail in source.
5. process chain
This can show the logs of the chain here and also status of subsequent process.
6 other messages.
Any other error message.
Refer
What is the information we can get the through details tab in RSMO
working with RSMO errors
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also
Data Load Errors
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Data Load issues
Errors in loading
data loading errors
load Errors
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
process chain issues or errors
Hope this helps.
Thanks,
JituK -
How do I contact Skype? What are the terms of use?
1) How do I contact Skype to ask a question?
2) What are the terms of use? I've been directed to two different URLs, each with different agreements.
http://www.skype.com/en/legal/tou/?intsrc=client-_-windows-_-6.18-_-eula#15
http://www.skype.com/en/legal/tou-usa/#21T-C wrote:
1) How do I contact Skype to ask a question?
2) What are the terms of use? I've been directed to two different URLs, each with different agreements.
http://www.skype.com/en/legal/tou/?intsrc=client-_-windows-_-6.18-_-eula#15
http://www.skype.com/en/legal/tou-usa/#21
Hello
1. please contact Skype customer service
2. http://www.skype.com/en/legal/tou/
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you. -
How Can I Run a SQL Loader Job from Schedular
How Can I Run a SQL Loader Job from Schedular , So that It Runs every Day.
Depends on a couple of factors.
If you are on a UNIX platform, you can create a shell script and schedule it with cron.
If you are on a Windows platform, you can create a batch file and schedule it with the Windows scheduler.
Or, if you are on Oracle 9i or 10g, you could use the external table feature instead of SQL*Loader. Then you could write a stored procedure to process the external table and schedule it using the Oracle scheduler (DBMS_JOB). This would probably be my preference. -
How to Schedule SAP background job at OS Level
Hi All,
Can Anyone tell me how to Schedule SAP background job at OS Level (unix).
Regards,
AnilHi Anil,
I donu2019t know your requirements, anyway itu2019s possible to setup your SAP job in order to start after an event, and after that you can get the event triggered from the Operating System in the following way:
- log into you Operating System with the SIDadm user id (at the Operating System level) and go to directory /usr/sap/SID/SYS/exe/run
- Run the SAPEVT executable as follows:
sapevt YOUR_EVENT -t pf=/usr/sap/SID/SYS/profile/DEV_DVEBMGS00_server001 nr=01
This will raise the event, and cause the job scheduled within SAP to execute.
You can periodically execute this job with crontab.
Thanks,
Federico Biavati -
Running a SQL Loaded Job from Schedular
How Can I Run a SQL Loader Job from Schedular ,
Message was edited by:
jusThe trick is to create a wrapper script that is referred to by the PROGRAM object with arguments. The wrapper should do the work.
/usr/local/bin/do_sqlldr.sh:
#!/usr/bin/env ksh
# setup actions
sqlldr control=...
Don't forget to check who is the owner of $ORACLE_HOME/bin/extjob and that the owner is available.
My question is how this can be fitted in an DTAP environment where Developement and Test environment are on the same server and have the same job definitions. Development and Test should use different datafile and logfile locations.
regards,
Ronald
http://ronr.nl/unix-dba -
How to schedule a background Job based on events
Hi,
We are on 4.6 C.
We have a background job that has two ABAP programs.
We need to start the 2nd ABAP program only after the first one has run successfully.
If the second ABAP program does not run, the the job should have a status "FINISHED".
Help appreciated.
Thanks
MalaHi,
How to schedule a background Job based on events,please refer to the follow SAP help:
You can use events that have already been defined, or you can create new events for scheduling background jobs.
If you wish to use new events, do the following to implement the event scheduling:
Define and transport the event as a user event with transaction SM62.
You must define only event IDs; event arguments are not defined in the R/3 System. Instead, you specify event arguments when you schedule a job to wait for an event and when you trigger the event.
If you define a new event, you must also transport it to your production systems. The event transaction does not have a connection to the transport system. Instead, you must create a transport request for the event yourself.
Do this to transport an event:
Create a transport request.
Start the editor in the transport request and enter the following:
R3TR TABU <table name> where table name is BTCSEV for a system event ID, BTCUEV for a user event ID.
Press F2 with the cursor on the table name to call up the screen for specifying the table entries to transport. In this screen, enter the event IDs that you have created.
Save and release the transport request. Ensure that it is imported into your production system(s).
To trigger an event, add:
the function module BP_EVENT_RAISE to your ABAP program, or
the program SAPEVT to your external script, batch file, or program.
When your programs execute these keywords, an event will be triggered in the R/3 background processing system. The event-based scheduler is started immediately. It in turn starts all jobs that were waiting upon the event, subject to normal background processing restrictions, such as the requirement that the job has been released to start.
Schedule the jobs that are to run when your events are triggered.
You can schedule jobs for one-time start or to be started whenever an event is triggered.
Regards,
collysun -
How to schedule a background job in realtime
Hi,
Can you tell me how to schedule a background job in realtime.
give some example scenerios in scheduling the background jobs in realtime.
Thanks.
sam.And also.....
There are two ways for you to handle,
one manually setting up the job through SM36 which is better and convinient,
secondly through program using FM's JOB_OPEN, SUBMIT, JOB_CLOSE.
Find below steps in doing both:
Procedure 1:
1. Goto Trans -> SM36
2. Define a job with the program and variant if any
3. Click on start condition in application tool bar
4. In the pop-up window, click on Date/Time
5. Below you can see a check box "Periodic Job"
6. Next click on Period Values
7. Select "Other Period"
8. Now give '15' for Minutes
9. Save the job
Procedure 2 via Program:
Below is a sample code for the same. Note the ZTEMP2 is the program i am scheduling with 15mins frequency.
DATA: P_JOBCNT LIKE TBTCJOB-JOBCOUNT,
L_RELEASE(1) TYPE c.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
JOBNAME = 'ZTEMP2'
IMPORTING
JOBCOUNT = P_JOBCNT
EXCEPTIONS
CANT_CREATE_JOB = 1
INVALID_JOB_DATA = 2
JOBNAME_MISSING = 3
OTHERS = 4.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SUBMIT ZTEMP2 VIA JOB 'ZTEMP2' NUMBER P_JOBCNT
TO SAP-SPOOL WITHOUT SPOOL DYNPRO
WITH DESTINATION = 'HPMISPRT'
WITH IMMEDIATELY = SPACE
WITH KEEP_IN_SPOOL = 'X' AND RETURN.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
JOBCOUNT = P_JOBCNT
JOBNAME = 'ZTEMP2'
STRTIMMED = 'X'
PRDMINS = 15
IMPORTING
JOB_WAS_RELEASED = L_RELEASE
EXCEPTIONS
CANT_START_IMMEDIATE = 1
INVALID_STARTDATE = 2
JOBNAME_MISSING = 3
JOB_CLOSE_FAILED = 4
JOB_NOSTEPS = 5
JOB_NOTEX = 6
LOCK_FAILED = 7
INVALID_TARGET = 8
OTHERS = 9.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Hope the above helps you.
***********reward points,if found useful -
Hi
How to schedule a V3 job in ECC to execute at reqular intervals
ThanksHi
As already answered it could be scheduled using job control option relating to datasource in R/3 system.
In addition to these you can also set the V3 jobs if you have an external job controlling system which would execute V3 programs are regular interval as desired.
Various V3 programs as as:
RMBWV303 V3 job for Inventory
RMBWV312 V3 job for Deliveries
RMBWV313 V3 job for Invoices
RMBWV308 V3 job for Shipments
RMBWV318 V3 Job for Services
RMBWV311 V3 Job for Orders
RMBWV302 V3 Job for Purchase
Regards
Ashish -
How do u down load music from your flash drive to your older ipod nano 2gb
how do u down load music from a flash drive to an older apple ipod nano 2gb
You import it into iTunes and then sync the iPod.
(78749)
Maybe you are looking for
-
Help with a 2013 Mac Pro kernel panic?
I've been working with Apple Support to nail down a kernal panic without much luck. The machine is shutting down/restarting a few times a day. Hardware test is negative and I've rebuilt Maverick. I thought it might be a firewire drive that I had co
-
MyPlugin is not loading in Upgrade flow in some machine.
Hi , I have created a Plugin which works in both Reader 9 and X. In most of the test machine MyPlugin appears in Toolbar Panel(Reader X and Reader 9) for both Fresh install and Upgrade install of MyProduct. In some test machine MyPlugin appears in
-
Hi, We are doing a fresh PI Installation with ABAP + JAVA stacks with HP-UX and Oracle 10g database, when the installation is going on we are facing problems due to missing java library file when sapinst trying to configure UME. There is no log viewe
-
Play's Fine on Mine But Not on Thier's
Okay, this is my situation. I have a presentation that I have imported from PowerPoint with audio that I have on the Captivate 4 timeline. I have gone into and edited the entry and exit anmimations in the PowerPoint presentation from the Captivate
-
Setup WRT160N only for business hours
I looking to set up my Wireless router to be only Active wireless signal from 6 am to 6 pm Monday thru friday. I want to do this keep my Work network more secure. Does any one know how to set this up. Thanks Jim