How to search the data of a completed process?

Hello,
I want to know if it is possible and how can I search for the information of a completed process.
Best Regards
SU

Here you go ...
http://help.sap.com/saphelp_nw72/helpdata/en/98/b872739db2469fb9dd945d2162fef2/frameset.htm
Regards,
Mahesh

Similar Messages

How to search the data of a WLI Workflow Instance

Is there a way to do any of the following in WLI 70?
a) access the data stored in a workflow instance as filesystem files so awk can be run against them to find specific occurrences of xml data elements?
b) perform a search upon the data stored in a workflow instance to find specific occurrences of xml data elements?

Hi Olivier,
Thanks for the reply.
I think using the File Control could work like you said if we could change the JPD, I also think some public API (perhaps an observer of some type) would work as you suggested.
However, this is one of our older prod apps (thankfully nearing retirement) and we really don't like to make changes unless we really really need to (few support resources are available, especially testers).
Also, and sorry if my initial post wasn't very clear about this, we want to search the past history of workflow instance data, not the new incoming data.
Any other ideas?

How to read the data in excel sheet

Dear sir,
How to read the data in excel sheet when i recieve a data serial communication... ie i have store a data in excel such that
Cell A Cell B
A Apple
B Ball
C Cat
D Doll
when i recieve A from serial communication i have to display Apple, and when i recieve B i have to display Ball and so on..

Hi,
I would recommend you to have a look at the VI attached. It makes use of a VI named 'Read from Spreadsheet' to read the row and column data from the tab delimited excel file. The read data is then searched for the Alphabet specified and finally returns you the corresponding string. The test file used to validate the operation of the VI is also attached.
Trust this would help you solve the issue.
Regards,
Sagar G Yadav | Application Engineer | National Instruments
Attachments:
read_from_excel.vi ‏10 KB
Book1.txt ‏1 KB

How to get the data from pcl2 cluster for TCRT table.

Hi frndz,
How to get the data from pcl2 cluster for tcrt table for us payroll.
Thanks in advance.
Harisumanth.Ch

PL take a look at the sample Program EXAMPLE_PNP_GET_PAYROLL in your system. There are numerous other ways to read payroll results.. Pl use the search forum option & you sure will get a lot of hits..
~Suresh

How to store the data coming from network analyser into a text or excel file

Hii everyone
I'm using Agilent 8719ET network analyser and wish to store the data coming from netowrk analyser into a text file/ excel file.
Presently I'm able to get the data on Labview graph using GPIB . Can anyone suggest how to go ahead after collect data sub vi. How can the data be stored into a file apart from showing on the graph?
Attached is the vi for kind consideration...
Looking for help
Regards
Rohit
Attachments:
Agilent 87XX Series Exceed Max Meas.vi ‏43 KB

First let me say that your code really looks pretty good. The data handling could be made more efficient by calculating the number of datapoints that are going to be in the completed dataset and preallocating the entire array -- but depending upon your answer to my questions, the logic in the lower shift register may be going away - so we won't worry about that right now.
The thing I need to know before addressing the data storage question is: Each time you call "Collect and Display Data.vi", how many element are in the array? Are you reading single data points, or a group of data? (BTW: if the answer to that question is obvious based on the way the other VIs are setup, I don't have the drivers so I can't tell what the setup values are.) Second, how fast does the loop iterate? Are we talking msec per loop?, seconds? fortnights?
The issues here are two-fold: how much data? and how fast is it coming? The answer to these will tell you how to save the data.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How to Hightlight the Data in Jsp Page

How to Hightlight the Data in Jsp Page,
I am doing doing search page,based on values given search page those are sent to servlet,in servlet based on some conditions if particuler id i am getting then i am redirecting to Respective jsp page with highlight the data from database..
Thanks in advance...

"Highlighting data in JSP sounds strange".
Without looking at your search specific algorithms I feel you are finally going to display a page (HTML content) to user which contains highlighted text. Highlighting is not directly related to server side language you use (JSP, ASP, PHP etc.). This is purely HTML and CSS. However, server side script (such as JSP) should generate HTML content for getting highlight effect.
Following HTML shows highlighted text using background-color property on span element.
<html>
<head>
    <title></title>
    <meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
</head>
<body>
      <p style="font-size:1.1em">This is a long paragraph which contains <span style="background-color: yellow;">highlighted text</span> and non highlighted text.</p>
</body>
</html>Thanks,
Mrityunjoy
Edited by: mrityunjoy on 14 Jun, 2010 3:30 AM

How to recover the data from a dropped table in production/archive mode

How to recover the data/change on a table that was dropped by accident.
The database is on archive mode.

Oracle Version. ? If 10g.
Try this Way
SQL> create table taj as select * from all_objects where rownum <= 100;
Table created.
SQL> drop table taj ;
Table dropped.
SQL> show recyclebin
ORIGINAL NAME    RECYCLEBIN NAME                OBJECT TYPE DROP TIME
TAJ              BIN$b3MmS7kYS9ClMvKm0bu8Vw==$0 TABLE        2006-09-10:16:02:58
SQL> flashback table taj to before drop;
Flashback complete.
SQL> show recyclebin;
SQL> desc taj;
Name                                      Null?    Type
OWNER                                              VARCHAR2(30)
OBJECT_NAME                                        VARCHAR2(30)
SUBOBJECT_NAME                                     VARCHAR2(30)
OBJECT_ID                                          NUMBER
DATA_OBJECT_ID                                     NUMBER
OBJECT_TYPE                                        VARCHAR2(19)
CREATED                                            DATE
LAST_DDL_TIME                                      DATE
TIMESTAMP                                          VARCHAR2(19)
STATUS                                             VARCHAR2(7)
TEMPORARY                                          VARCHAR2(1)
GENERATED                                          VARCHAR2(1)
SECONDARY                                          VARCHAR2(1)
SQL>M.S.Taj

How to find the data loaded from r/3 to bw

hi
how to find the data loaded from r/3 to bw is correct . i am not able to find which feild in the query is connected to which feild in the r/3 . where i am geting the data from r/3 . is there any process to find which feild and table the data is comming from . plz help
thanks in advance to u all

Hi Veda ... the mapping between R/3 fields and BW InfoObjects should take place in Transfer Rules. Other transformation could take place in Update Rule.
So you could proceed this way: look at InfoProvider Data Model and see if the Query does perform any calculation (even with Virtual keyfigures / chars). Than go back to Update Rules and search for other calculation / transformation. At least there are Tranfer Rule and eventually DataSource / Extraction Enhancements.
As you can easily get there are many points where you have to look for ... it's a quite complex work but very usefull.
Once you will have identified all mappings / transfromation see if BW data matchs R/3 (considering calculations ...)
Good job
GFV

How to load the data from informatica into bw & how to report the data

Hi friends,
how to load the data from informatica into bw & how to report the data
using cognos.(i.e how to access the data in sap bw using cognos 8 BI suite).
Thanks,
madhu.

Inorder to report BW data into Cognos you can extract data from using Open Hub to the DB table from which Cognos reads.
For BW informatic integration refer following docs:
http://www.aman.co.il/aman/pfd/DataInteg_BR.q103cd.pdf.pdf
http://h71028.www7.hp.com/enterprise/cache/3889-0-0-225-121.html
http://devnet.informatica.com/learning/ePresentations.asp
http://72.14.203.104/search?q=cache:C741L86Q19oJ:devnet.informatica.com/showcase/resources/Essbase_DataSheet.pdfinformaticapowerconnect(BI)&hl=en&gl=in&ct=clnk&cd=3
http://www.informatica.com/customers/utilities_energy/fpl_group.htm
http://www.informatica.com/solutions/resource_center/technote_sapbw_65241004.pdf#search=%22Informatica%20to%20Bw%22

How to retrieve the data from SAP-BAPI by using VB Code

Hi ,
I am new to BAPI.
V have created an application in Visual Basic with the following fields
EmpNo , EmpName, Addr1, Addr2, City and Phone (Only for Test)
We have written the code for SAVING the data into SAP. Already we have
constructed a table with the respective fields in SAP.
For that we ourself created our own BAPI Structure / Function Group /
Function Module/ Business Object - RELEASED related elements.
1)Established the connection successfully.
2)Stored the data into SAP Successfully and v r in need of
3)HOW TO RETRIEVE THE DATA FROM SAP (USING GETLIST.....GETDETAIL....)
Following is the code :
'BAPI Structure : ZBAPIEMP
'Function Group : ZBAPIEMP
'Function Module : ZBAPI_EMP_CREATEFROMDATA
'Business Object : ZBAPIEMP
'Function Module : ZBAPI_EMP_GETLIST
Dim bapictrl As Object
Dim oconnection As Object
Dim boEmp As Object
Dim oZEmp_Header As Object
Dim oImpStruct As Object
Dim oExpStruct As Object
Dim oreturn As Object
Dim x As String
Private Sub Form_Load()
Set bapictrl = CreateObject("SAP.BAPI.1")
Set oconnection = bapictrl.Connection
oconnection.logon
Set boEmp = bapictrl.GetSAPObject("ZBAPIEMP")
Set oZEmp_Header = bapictrl.DimAs(boEmp, "CreateFromData", "EmployeeHeader")
Set oImpStruct = bapictrl.DimAs(boEmp, "GetList", "EmployeeDispStruct")
End Sub
Private Sub cmdSave_Click()
    oZEmp_Header.Value("EMPNO") = txtEmpNo.Text
    oZEmp_Header.Value("EMPNAME") = txtEmpName.Text
    oZEmp_Header.Value("ADDR1") = txtAddr1.Text
    oZEmp_Header.Value("ADDR2") = txtAddr2.Text
    oZEmp_Header.Value("CITY") = txtCity.Text
    oZEmp_Header.Value("PHONE") = txtPhone.Text
    boEmp.CreateFromData EmployeeHeader:=oZEmp_Header, Return:=oreturn
    x = oreturn.Value("Message")
    If x = "" Then
        MsgBox "Transaction Completed!..."
    Else
        MsgBox x
    End If
End Sub
Private Sub cmdView_Click()
End Sub
COULD ANYBODY GUIDE ME, HOW TO RETRIEVE THE DATA FROM BAPI, FOR THE WRITTEN CODE.

I didn't seen any other answers but here's how it's been done previously in our organization for a custom BAPI. In this example, we give material and language to return the part description. It's not specific to your project but may give you ideas..
-Tim
Option Compare Database
Dim SAPLOGIN As Boolean
Dim FunctionCtrl As Object
Dim SapConnection As Object
Sub SAPLOGOUT()
On Error GoTo LogoutFehler
    SapConnection.logoff
    SAPLOGIN = False
Exit Sub
LogoutFehler:
    If Err.Number = 91 Then
        Exit Sub
    Else
        MsgBox Err.Description, vbCritical, "Fehler-Nr." & CStr(Err.Number) & " bei SAP-Logout"
    End If
End Sub
Function SAPLOG() As Boolean
'Verbindungsobjekt setzen (Property von FunctionCtrl)
   Set FunctionCtrl = CreateObject("SAP.Functions")
   Set SapConnection = FunctionCtrl.Connection
'Logon mit Initialwerten
   SapConnection.Client = "010"
   SapConnection.Language = "EN"
   SapConnection.System = "PR1"
   SapConnection.SystemNumber = "00"
   'SapConnection.Password = ""
   SapConnection.GroupName = "PR1"
   SapConnection.HostName = "168.9.25.120"
   SapConnection.MessageServer = "168.9.25.120"
     If SapConnection.Logon(0, False) <> True Then 'Logon mit Dialog
         Set SapConnection = Nothing
         DoCmd.Hourglass False
         MsgBox "No connection to SAP R/3 !"
         SAPLOGIN = False
         SAPLOG = False
         Exit Function
      End If
    SAPLOG = True
End Function
Function MatDescr(MatNr As String)
Dim func1 As Object
Dim row As Object, X As Integer, ErsteNr As String
Dim DatensatzZähler As Long
Dim RowField(1 To 50, 0 To 1) As String, RowLine As Long
    If Not SAPLOGIN Then
        If Not SAPLOG() Then
            MsgBox "No connection to SAP !", 16
            SAPLOGOUT
            Exit Function
        End If
    End If
' Instanziieren des Function-Objektes
Set func1 = FunctionCtrl.Add("Z_BAPI_READ_MAKT")
' Export-Paramter definieren
func1.exports("MATNR") = MatNr
func1.exports("SPRAS") = "EN"
DoEvents
If Not func1.call Then
    If func1.exception <> "" Then
        MsgBox "Communication Error with RFC " & func1.exception
    End If
    DoCmd.Hourglass False
    SAPLOGOUT
    Exit Function
Else
MatDescr = func1.imports("MAKTX")
End If
If MatDescr = "" Then
    MatDescr = "PART NO. NOT FOUND"
End If
End Function

How to read the data in spectrum analyzer (Anritsu MS2661C) and put it in Excel using Labview

Hi all, I'm new to using the labview, and I have some trouble doing my project using the labview software.
I have been trying to use the spectrum analyzer (Anritsu MS2661C) which connect to computer using the GPIB connection.
I have got the instrument driver which can write and control the instrument using Labview 2010.
and my Question is how do read the data or result from the spectrum analyzer and send it to the microsoft excel?
Do I need to use other software or programming to do this step?
If anyone know how is this done, please let me know.
Regards,
Ery

Hi ery,
In order to send data that you have read in from an instrument to Excel, the most convenient way to do this would be to use our Report Generation Toolkit. The Report Generation Toolkit is a very useful tool that allows you to interface to Microsoft Office software from LabVIEW, including Word and Excel. I am not sure if you are familiar with this, but I have attached a link that explains more about the Report Generation Toolkit below.
Another way would be to use the Write To Spreadsheet File VI. While this will store your data to a spreadsheet data file, it will not allow you to programmatically perform any Excel formatting like the Report Generation Toolkit offers. I have also attached a link to some information on the Write To Spreadsheet VI below.
Also, be sure to check out the Example Finder in LabVIEW for a number of examples on how to write data to a spreadsheet file. From LabVIEW, you can go to Help»Find Examples to launch the Example Finder. From there, you can search for "spreadsheet," which should populate examples for use in different applications. I hope this helps, ery. Please let me know if you have any further questions about these!
NI LabVIEW Report Generation Toolkit for Microsoft Office
Write To Spreadsheet File VI
Taylor G.
Product Support Engineer
National Instruments
www.ni.com/support

How to capture the date and time of a background job

Hi experts,
How to capture the date and time of a background job?
How to find whether it is runned succesfully or not?
If it is not successful how to put error message?
ASAP
Thanx in advance,
Sudha

To Display the STATUS of the JOB which is exectued in background
CLEAR : wa_jobsteplist.
REFRESH : i_jobsteplist.
WRITE:/ 'DISPLAYING JOB STATUS'.
CALL FUNCTION 'BP_JOB_READ'
    EXPORTING
      job_read_jobcount           = w_jobcount
      job_read_jobname            = w_jobname
      job_read_opcode             = '20'
    JOB_STEP_NUMBER             =
   IMPORTING
     job_read_jobhead            = wa_jobhead
   TABLES
     job_read_steplist           = i_jobsteplist
CHANGING
   RET                         =
   EXCEPTIONS
     invalid_opcode              = 1
     job_doesnt_exist            = 2
     job_doesnt_have_steps       = 3
     OTHERS                      = 4
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
To Display the status text as per the status type
CASE wa_jobhead-status.
    WHEN 'S'. WRITE: / 'Scheduled'.
    WHEN 'R'. WRITE: / 'Released'.
    WHEN 'F'. WRITE: / 'Completed'.
    WHEN 'A'. WRITE: / 'Cancelled'.
    WHEN OTHERS.
ENDCASE.

How to automate the data load process using data load file & task Scheduler

Hi,
I am doing Automated Process to load the data in Hyperion Planning application with the help of data_Load.bat file & Task Scheduler.
I have created Data_Load.bat file but rest of the process i am unable complete.
So could you help me , how to automate the data load process using Data_load.bat file & task Scheduler or what are the rest of the file is require to achieve this.
Thanks

To follow up on your question are you using the maxl scripts for the dataload?
If so I have seen and issue within the batch (ex: load_data.bat) that if you do not have the full maxl script path with a batch when running it through event task scheduler the task will work but the log and/ or error file will not be created. Meaning the batch claims it ran from the task scheduler although it didn't do what you needed it to.
If you are using maxl use this as the batch
"essmsh C:\data\DataLoad.mxl" Or you can also use the full path for the maxl either way works. The only reason I would think that the maxl may then not work is if you do not have the batch updated to call on all the maxl PATH changes or if you need to update your environment variables to correct the essmsh command to work in a command prompt.

How to import the data to Data manager

Hi All,
I am new to MDM and need your help in handling the following issue
In our setup we are sending the Customer master data from R/3->XI->MDM (R/3-> XI IDOCs, XI->MDM XML files).
with the help of extraction job in R/3 IDOCs r generated and XI has onverted these IDOCs to XML Files and created at MDM Server. Now my Question is how to import the Data from these XML files to Data Manager !!!!
Note : Import Map settings are done already in the system.
Can any one help me the steps requeired to get this data to Data manager .
and am I need to do some activity in MDM to import the data to Data manager each and every time or is there any automatic way of doing this .
Please guide me.
Thanks in advance!

Hi MDM User,
Generally there are 2 cases while importing the data,
1) Initial Load
2) Delta Load
Initial Load means importing the data into MDM at first time.This is usually done by manual importing
without using import server.
Delta Load means importing the data into MDM when we have changes to existing data or added new data
to existing data.This is usually done by automatically using import server.
To manually import the data,just create a remote system and port in console and login into import manager
using remote system.Create ,save the map and execute the map.There is no other configurations needed.
To automatically import the data without manual intervention,we go for import server.
To let this happen we need to set some configuarations in mdis.ini file of import server.
Give the repository name,username and password which are set in console for that repository and also
give schedule time based on which import server picks the file from ready folder.
Go to the import manager , change the map and import action depends on your requriment and save that
map.
and also you need to set port type as inbound and automatic and select the map which you saved earlier in
MDM console.
As soon as we start the import server, it picks the file from ready folder of MDM server based on
configurations which we set in mdis.ini file and executes the map.
Here i am giving complete path of ready folder.
SAP MDM 5.5> Server>Distributions>bp1bocap080.bp.co_MSQL> BP3_PoC_Customer> Inbound>Siebel> SIEBEL_OB_CUS_SIEBELCUS01> Ready)
This path has to be given in target directory of receiver communication channel of XI so that it puts XML
file in the above path.
For better understanding,go through below blogs.
/people/balas.gorla/blog/2007/02/05/r3-xi-mdm-outbound-scenario
/people/balas.gorla/blog/2006/09/27/mdm-xi-r3-integration
Hope it helps
Reward points,if found useful
Thanks
Narendra

If Both tables having References then how to insert the data each other

Hai EveryOne..,
My Sample data.,
Create table emp (empno number primary key,ename varchar2(20));
Create table emp_dup (empno number references emp(empno),ename varchar2(20) primary key);
alter table emp add constraint ename_fk foreign key(ename) references emp(ename);
My Question is How to insert the data into these two tables?
Its a *"Circular Reference"* Concept.
Please ...
Thank You!!

You need to set the DEFERRED clause of the constraint when you create your foreign key as DEFERRABLE by which you can move the constraint validation at transaction level.
In an interview point of view that could be a reasonable answer. But in real time this could be strongly questionable.
Here is an example
SQL> create table emp1 (empno number, ename varchar2(10))
2 /
Table created.
SQL> create table emp2 (empno number, ename varchar2(10))
2 /
Table created. Define Primary Key for two tables
SQL> alter table emp1 add constraint emp1_pk primary key (empno)
2 /
Table altered.
SQL> alter table emp2 add constraint emp2_pk primary key (ename)
2 /
Table altered. Add foreign key for two tables with DEFERRED clause set as DEFERRABLE
SQL> alter table emp1 add constraint emp1_fk foreign key (ename) references emp2(ename) initially deferred deferrable
2 /
Table altered.
SQL> alter table emp2 add constraint emp2_fk foreign key (empno) references emp1(empno) initially deferred deferrable
2 /
Table altered. Now here is the test case
SQL> insert into emp1 values (1, 'karthick')
2 /
1 row created.
SQL> commit
2 /
commit
ERROR at line 1:
ORA-02091: transaction rolled back
ORA-02291: integrity constraint (ARBORU.EMP1_FK) violated - parent key not found So the validation is done at Transaction level. Now let insert the value into both tables.
SQL> insert into emp1 values (1, 'karthick')
2 /
1 row created.
SQL> insert into emp2 values (1, 'karthick')
2 /
1 row created.
SQL> commit
2 /
Commit complete.

How to search the data of a completed process?

Similar Messages

Maybe you are looking for