How to search the data of a WLI Workflow Instance
Is there a way to do any of the following in WLI 70?
a) access the data stored in a workflow instance as filesystem files so awk can be run against them to find specific occurrences of xml data elements?
b) perform a search upon the data stored in a workflow instance to find specific occurrences of xml data elements?
Hi Olivier,
Thanks for the reply.
I think using the File Control could work like you said if we could change the JPD, I also think some public API (perhaps an observer of some type) would work as you suggested.
However, this is one of our older prod apps (thankfully nearing retirement) and we really don't like to make changes unless we really really need to (few support resources are available, especially testers).
Also, and sorry if my initial post wasn't very clear about this, we want to search the past history of workflow instance data, not the new incoming data.
Any other ideas?
Similar Messages
-
How to search the data of a completed process?
Hello,
I want to know if it is possible and how can I search for the information of a completed process.
Best Regards
SUHere you go ...
http://help.sap.com/saphelp_nw72/helpdata/en/98/b872739db2469fb9dd945d2162fef2/frameset.htm
Regards,
Mahesh -
How to read the data in excel sheet
Dear sir,
How to read the data in excel sheet when i recieve a data serial communication... ie i have store a data in excel such that
Cell A Cell B
A Apple
B Ball
C Cat
D Doll
when i recieve A from serial communication i have to display Apple, and when i recieve B i have to display Ball and so on..Hi,
I would recommend you to have a look at the VI attached. It makes use of a VI named 'Read from Spreadsheet' to read the row and column data from the tab delimited excel file. The read data is then searched for the Alphabet specified and finally returns you the corresponding string. The test file used to validate the operation of the VI is also attached.
Trust this would help you solve the issue.
Regards,
Sagar G Yadav | Application Engineer | National Instruments
Attachments:
read_from_excel.vi 10 KB
Book1.txt 1 KB -
How to get the data from pcl2 cluster for TCRT table.
Hi frndz,
How to get the data from pcl2 cluster for tcrt table for us payroll.
Thanks in advance.
Harisumanth.ChPL take a look at the sample Program EXAMPLE_PNP_GET_PAYROLL in your system. There are numerous other ways to read payroll results.. Pl use the search forum option & you sure will get a lot of hits..
~Suresh -
How to Hightlight the Data in Jsp Page
How to Hightlight the Data in Jsp Page,
I am doing doing search page,based on values given search page those are sent to servlet,in servlet based on some conditions if particuler id i am getting then i am redirecting to Respective jsp page with highlight the data from database..
Thanks in advance..."Highlighting data in JSP sounds strange".
Without looking at your search specific algorithms I feel you are finally going to display a page (HTML content) to user which contains highlighted text. Highlighting is not directly related to server side language you use (JSP, ASP, PHP etc.). This is purely HTML and CSS. However, server side script (such as JSP) should generate HTML content for getting highlight effect.
Following HTML shows highlighted text using background-color property on span element.
<html>
<head>
<title></title>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
</head>
<body>
<p style="font-size:1.1em">This is a long paragraph which contains <span style="background-color: yellow;">highlighted text</span> and non highlighted text.</p>
</body>
</html>Thanks,
Mrityunjoy
Edited by: mrityunjoy on 14 Jun, 2010 3:30 AM -
How to find the data loaded from r/3 to bw
hi
how to find the data loaded from r/3 to bw is correct . i am not able to find which feild in the query is connected to which feild in the r/3 . where i am geting the data from r/3 . is there any process to find which feild and table the data is comming from . plz help
thanks in advance to u allHi Veda ... the mapping between R/3 fields and BW InfoObjects should take place in Transfer Rules. Other transformation could take place in Update Rule.
So you could proceed this way: look at InfoProvider Data Model and see if the Query does perform any calculation (even with Virtual keyfigures / chars). Than go back to Update Rules and search for other calculation / transformation. At least there are Tranfer Rule and eventually DataSource / Extraction Enhancements.
As you can easily get there are many points where you have to look for ... it's a quite complex work but very usefull.
Once you will have identified all mappings / transfromation see if BW data matchs R/3 (considering calculations ...)
Good job
GFV -
How to load the data from informatica into bw & how to report the data
Hi friends,
how to load the data from informatica into bw & how to report the data
using cognos.(i.e how to access the data in sap bw using cognos 8 BI suite).
Thanks,
madhu.Inorder to report BW data into Cognos you can extract data from using Open Hub to the DB table from which Cognos reads.
For BW informatic integration refer following docs:
http://www.aman.co.il/aman/pfd/DataInteg_BR.q103cd.pdf.pdf
http://h71028.www7.hp.com/enterprise/cache/3889-0-0-225-121.html
http://devnet.informatica.com/learning/ePresentations.asp
http://72.14.203.104/search?q=cache:C741L86Q19oJ:devnet.informatica.com/showcase/resources/Essbase_DataSheet.pdfinformaticapowerconnect(BI)&hl=en&gl=in&ct=clnk&cd=3
http://www.informatica.com/customers/utilities_energy/fpl_group.htm
http://www.informatica.com/solutions/resource_center/technote_sapbw_65241004.pdf#search=%22Informatica%20to%20Bw%22 -
Hi all, I'm new to using the labview, and I have some trouble doing my project using the labview software.
I have been trying to use the spectrum analyzer (Anritsu MS2661C) which connect to computer using the GPIB connection.
I have got the instrument driver which can write and control the instrument using Labview 2010.
and my Question is how do read the data or result from the spectrum analyzer and send it to the microsoft excel?
Do I need to use other software or programming to do this step?
If anyone know how is this done, please let me know.
Regards,
EryHi ery,
In order to send data that you have read in from an instrument to Excel, the most convenient way to do this would be to use our Report Generation Toolkit. The Report Generation Toolkit is a very useful tool that allows you to interface to Microsoft Office software from LabVIEW, including Word and Excel. I am not sure if you are familiar with this, but I have attached a link that explains more about the Report Generation Toolkit below.
Another way would be to use the Write To Spreadsheet File VI. While this will store your data to a spreadsheet data file, it will not allow you to programmatically perform any Excel formatting like the Report Generation Toolkit offers. I have also attached a link to some information on the Write To Spreadsheet VI below.
Also, be sure to check out the Example Finder in LabVIEW for a number of examples on how to write data to a spreadsheet file. From LabVIEW, you can go to Help»Find Examples to launch the Example Finder. From there, you can search for "spreadsheet," which should populate examples for use in different applications. I hope this helps, ery. Please let me know if you have any further questions about these!
NI LabVIEW Report Generation Toolkit for Microsoft Office
Write To Spreadsheet File VI
Taylor G.
Product Support Engineer
National Instruments
www.ni.com/support -
How to update the data the transparent table CKMLMV013 ?
How to update the data the transparent table CKMLMV013 ?
can you please replay asap.
thanks,
sambaHi,
if you do a "where used" search of the table CKMLMV013 you will see that it is updated in several places:
e.g. fm CKML_ORDER_CONNECTION_UPDATE
Have a look at those places where the table is updated.
Best regards. -
How to pass the data from a input table to RFC data service?
Hi,
I am doing a prototype with VC, I'm wondering how VC pass the data from a table view to a backend data service? For example, I have one RFC in the backend system with a tabel type importing parameter, now I want to pass all the data from an input table view to the RFC, I guess it's possible but I don't know how to do it.
I try to create some events between the input table and data service, but seems there is no a system event can export the whole table to the backend data service.
Thanks for your answer.Thanks for your answer, I tried the solution 2, I create "Submit" button, and ser the mapping scope to be "All data rows", it only works when I select at least one row, otherwise the data would not be passed.
Another question is I have serveral imported table parameter, for each table I have one "submit" event, I want these tables to be submitted at the same time, but if I click the submit button in one table toolbar, I can only submit the table data which has a submit button clicked, for other tables, the data is not passed, how can I achieve it?
Thanks. -
How to select the data from a Maintainance View into an internal table
Hi All,
Can anybody tell me how to select the data from a Maintainance View into an internal table.
Thanks,
srinivas.HI,
You can not retrieve data from A mentenance view.
For detail check this link,
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
Regards,
Anirban -
How to download the data which is in the table?
how to download the data which is in the table?
every field data in the table i want to download and once the download is finished then i have to set the flag as 'download is finished ' as one field in table?
can any one help me in this.
Phani.
Edited by: phani kumarDurusoju on Jan 9, 2008 6:36 AMOne way is to Download the data Directly from the database table using the path SE11->Give table name ->Execute -> system ->List ->Save ->Local File
There u can downlaad the data .
The ither way is to use the code
The Following Code will be helpfull to You
Data :ITAB TYPE TRUXS_T_TEXT_DATA,
FILE TYPE STRING.
C_ASC TYPE CHAR10 VALUE 'ASC',
DATA: L_STATUS TYPE C,
L_MESSAGE TYPE PMST_RAW_MESSAGE,
L_SUBJECT TYPE SO_OBJ_DES.
DATA: L_FILELENGTH TYPE I.
PERFORM download_to_pc
TABLES
itab
USING
filename
c_asc
c_x
CHANGING
l_status
l_message
l_filelength.
FORM DOWNLOAD_TO_PC TABLES DOWNLOADTAB
USING FILENAME
FILETYPE TYPE CHAR10
DELIMITED
CHANGING STATUS
MESSAGE TYPE PMST_RAW_MESSAGE
FILELENGTH TYPE I.
DATA: L_FILE TYPE STRING,
L_SEP.
L_FILE = FILENAME.
IF NOT DELIMITED IS INITIAL.
L_SEP = 'X'.
ENDIF.
STATUS = 'S'.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = L_FILE
FILETYPE = FILETYPE
WRITE_FIELD_SEPARATOR = L_SEP
IMPORTING
FILELENGTH = FILELENGTH
TABLES
DATA_TAB = DOWNLOADTAB
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22.
IF SY-SUBRC <> 0.
STATUS = 'E'.
CASE SY-SUBRC.
WHEN 1.
MESSAGE = 'gui_download::file write error'.
WHEN 2.
MESSAGE = 'gui_download::no batch'.
WHEN 3.
MESSAGE = 'gui_download::gui refuse file transfer'.
WHEN 4.
MESSAGE = 'gui_download::invalid type'.
WHEN 5.
MESSAGE = 'gui_download::no authority'.
WHEN 6.
MESSAGE = 'gui_download::unknown error'.
WHEN 7.
MESSAGE = 'gui_download::header not allowed'.
WHEN 8.
MESSAGE = 'gui_download::separator not allowed'.
WHEN 9.
MESSAGE = 'gui_download::filesize not allowed'.
WHEN 10.
MESSAGE = 'gui_download::header too long'.
WHEN 11.
MESSAGE = 'gui_download::dp error create'.
WHEN 12.
MESSAGE = 'gui_download::dp error send'.
WHEN 13.
MESSAGE = 'gui_download::dp error send'.
WHEN 14.
MESSAGE = 'gui_download::ubknown dp error'.
WHEN 15.
MESSAGE = 'gui_download::access denied'.
WHEN 16.
MESSAGE = 'gui_download::dp out of memory'.
WHEN 17.
MESSAGE = 'gui_download::disk full'.
WHEN 18.
MESSAGE = 'gui_download::dp timeout'.
WHEN 19.
MESSAGE = 'gui_download::file not found'.
WHEN 20.
MESSAGE = 'gui_download::dataprovider exception'.
WHEN 21.
MESSAGE = 'gui_download::control flush error'.
WHEN 22.
MESSAGE = 'gui_download::Error'.
ENDCASE.
ENDIF.
ENDFORM. "download_to_pc
At The End Reward points.
Please it's Required.
Thanks ,
Rahul -
How to add the date field in the dso and info cube
Hi all.
I am new to bi 7. in the earlier version v hav to button to add the date field. but in the bi 7 der is no option so can any body tell me how to add the date field in the data targets
Thanks & Regard
KKmy prob is solved
KK -
How to get the data from multiple nodes to one table
Hi All,
How to get the data from multiple nodes to one table.examples nodes are like A B C D E relation also maintained
Regards,
IndraHI Indra,
From Node A, get the values of the attributes as
lo_NodeA->GET_STATIC_ATTRIBUTES( IMPORTING STATIC_ATTRIBUTES = ls_attributesA ).
Similarily get all the node values from B, C, D and E.
Finally append all your ls records to the table.
Hope you are clear.
BR,
RAM. -
How to get the data from Pooled Table T157E.
Hi Experts,
How to get the data from Pooled Table T157E.
Any help.
Thanks in Advance,
Ur's Harsha.create some internal table similar to T157E and pass all data as per SPRAS.
After that use internal table in your program as per the requirement.
Regds,
Anil
Maybe you are looking for
-
ICal: Changing the assigned calendar of an event sends out a new invite to all participants
iCal version 5.0.3: I have multiple accounts set up (iCloud, shared, Exchange) in iCal. I've noticed that when I receive an invite that is assigned to the wrong calendar (e.g. to my icloud calendar) and I then change the assigned calendar to the Exch
-
6600GT and Widescreen monitor w/ DVI
I just picked up a Viewsonic 20" widescreen LCD running at 1680x1050 and am having trouble getting getting it to work with the DVi connection on my MSI 6600GT vid card. Got everything working fine under VGA but if I try to switch to the DVI input it
-
Different applications context in iStore
Vi have implemented severel minisites in iStore and have a question regarding using different context for different minisites. Is it possible to configure the iStore in a way that different minisites can have different applications context? For insta
-
Final Cut Express - Aspect Ratio
Where do I set the aspect ratio in Final Cut Express? I find that often I import 4:3 clips, and FCE wants me to work with them in a 16:9 Sequence, so I get letter boxing. Sometimes, FCE seems smart enough and says "hey should I fix this", but sometim
-
Different CCR result when compared to OM17 result
Hello All , What currently we have seen is when we manually delete stock in SAP APO using RLC DELETE and run CCR report it shows that the Stock is INCONSISTENT but when we run the OM17 for STOCKS it shows that STOCK is CONSISTEN