How to see old successfully delivered messages in Adapter Engine

We are unable to see the messages that were successfully delivered by Adapter Engine more than a day.Ho do we see old successfully delivered messages by Adapter Engine.We are only able to see the messages that were 1 day old.We are using PI 7.1.
We are able to see the older messages in Integration Engine as per the config in sxmb_adm.
Any Help greatly appreciated.
Thanks,
Aravind

Only message that contain error,holding,not delivered are getting persisted not the sucessfully delivered ones.
Is there any Archiving scheduled for your Adapter Engine?
I want to see the old messages that were delivered sucessfully
In Message Monitoring Itself select Archive (instaed of Database) and make a search.....if archiving is scheduled then you should be able to see the messages by this option.
Regards,
Abhishek.

Similar Messages

Can no longer see old or saved messages in iphone mail inbox

I updated my phones software yesterday upon request and now i can no longer see old or saved messages in my inbox. I can see the n ew ones when they arrive, and this problem is restricted only to the inbox as i can see messages in the junk and sent folders fine.
Hope someone can help!

Try a reset of the device by pressing and holding the home and power button for 15-20 seconds until the white Apple logo appears.

How to restart the Successfully processed messages

Hi,
I have IDOC to File Scenario
we posted the idoc from R/3 and it has processed successfully.
Now again i want to process that idoc again with out going to R/3.
How to restart the Successfully processed message from MONI.
we have one option in MONI Restart. this is not working for Successfully processed messages.
How to achieve this
Regards
Suman

Hello Suman..
XI: Restarting successfully processed messages..
Go through this : Michal Krawczyk Blog This will really helpful to you..
/people/michal.krawczyk2/blog/2005/11/09/xi-restarting-successfully-processed-messages
Reward Points If it is Helpful...
Thanks,
Satya Kumar..

Unable to cancel messages in adapter engine

Hello,
We have implemented an interface with file connector. Since one week, all messages are hanged in the adapter engine with status TO BE DELIVERED.
I tried to cancel but the folowing error message appears :
Could not fail message. Reason: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not fail message 0013211d-2dc8-1def-a8a4-938b4635c3af(INBOUND), as triggered by admin action. Reason: Predecessor not in final state.
This interface is a proxy from ECC6-->csv file and i can't see the corresponding messaging in any queues SMQ1..
They are only available in the RWB/message monitoring/adapter engine
Can you tell me how to process these messages or cancel ?
Regards

Hi
Messages will go in to the state Tobe delivered if there are no threads available for the particular adapter.. and lack of threads is due to the state of the messages in DLNG...
Check the messages which are in DLNG and the reason behing long time for processing the same..(can be restart of the target system...)
if you get the error saying predecessor is not in final state...
for this you need to check the parent message in the queue which is causing this. this can be done using messaging system url
http://host:port/MessagingSystem/
go here and check the tab EOIO message ..... and there check the messages which are blocked and check the queue names if need to find the paticular queue..and reprocess if the error occured can be rectified...
HTH
Rajesh

SOAP messages not visible in RWB - Message Monitoring - Adapter Engine

Hi,
following scenario:
ERP is sending IDocs to PI.
Within PI an integration process sends the IDoc data through a SOAP (WS) receiver channel to a system far far away.
In RWB -> Communication Channel Monitoring I can see all delivered messages selecting my SOAP channel.
But:
I can´t see the SOAP messages in RWB -> Message Monitoring -> Messages of Adapter Engine.
In RWB -> Message Monitoring -> Messages of Integration Engine I only see SOAP messages with status "Error".
Successful column is empty.
Do I have to adjust some system / monitoring parameters also seeing SOAP messages in RWB->Message Monitoring?
Thanks in advance,
André

Hi Ravi,
thanks.
But there are thousands of successful messages delivered to the receiver.
These successful messages can only be seen in the Channel Monitoring.
I can´t find these successful messages in Message Monitoring.
Only some with status "Error" are displayed.
Strange...
Cheers,
André

Cannot resend messages in adapter engine

Hi all,
I encountered thousand messages in adapter engine yesterday with error category: XI_J2EE_ADAPTER_ENGINE, error code: JMS_TRANSMISSION_ERROR.
First I checked the affected communication channel, and there was an error in MQ side. Also, our database crashed. But these issues were resolved already. Then I tried to resend the messages, but still it ended up in system error. As I looked in the log,
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Connector for ConnectionProfile of channel: JMS_--_Receiveron node: -having object id: - encountered error: MQJMS2007: failed to send message to MQ queue in sending to destination queue:///?targetClient=1, the message message: JMS Message class: jms_text JMSType: null JMSDeliveryMode: 2 JMSExpiration: 0 JMSPriority: 4 JMSMessageID: null JMSTimestamp: 1193614619284 JMSCorrelationID:--
Exception caught by adapter framework: Connector for ConnectionProfile of channel: JMS_----
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Pending message discovered: -
.The channel is configured throw an recoverable, temporary error for this warning (default). Decide whether you want to bypass this message. If so, set the Pending Handling channel parameter to 'Bypass' and restart the message afterwards.
Exception caught by adapter framework: Pending message discovered: -
.The channel is configured throw an recoverable, temporary error for this warning (default). Decide whether you want to bypass this message. If so, set the Pending Handling channel parameter to 'Bypass' and restart the message afterwards.
Every time I tried to resend the message, it ended up in error stated above. But there are successful messages today which means that the communication channel is working fine.
How can I resend the messages stucked in the adapter engine? Hope someone can help me.
Thanks a lot in advance.

May be when u tried to send the message some of the message got stuck in AE due to some Error.
As I no the message can stuck in AE when....Target Systems is down, Test data is not valid for receiver..then few of the messages goes in System Error and later message come in waiting/Holding/To be Delieverd state...
Check all the messages that has in System Error status...
Thanks
Farooq.

Archiving message in Adapter Engine in XI 3.0

Dear all,
Could you please explain the procedure of Archiving Messages in Adapter Engine in XI 3.0.
I have read many blogs regarding deleting messages in Adapter Engine, but nowhere i can see about Archiving.
I have been told that activating and scheduling "Default Version Archive Job" in RWB->Components->Adapter Engine->Background Processing would solve the purpose.
But while activating, i am unale to set rules, as it gives error " Rules are not allowed for jobs with set 'archive edited messages only' flag."
Thanks and regards

Hi,
Please check the [link|http://www.****************/Tutorials/XI/Archiving/Index.htm]
Also check this
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50?quicklink=index&overridelayout=true
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=147266890
Regards,
Naveen.

Message in adapter engine

Hi all,
We monitor messages in adapter engine through RWB.
Can anyone tell me where these messages are stored?

hi,
it has the misconception that RWB uses the same data base as of sxmb_moni.
but this is not true. actually RWB has a java componenet and IE is a abap componenet.
RWB getting tha data from SXMB_MONI db(abap table) through the jrfc call and storing it into the XI_AF_MSG table. this can be verified because, when u try to fatch payload for the sych message in RWB ,it is showing payload is deleted to save memory . but the same message with the payload can be displayed at SXMB_MONI .but for this u need to set the retention period at sxmb_adm---intigration engine configuration.by default value for this is 0 days.please have a look of below link.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/xi%252btables
the XI_AF_MSG_AUDIT table stored the detail of all the audit log.thats why the no of entrieds in this table is more than XI_AF_MSG table.
now Q is how to access these DB.
these DB can be access through the DB tool say SQLplus.
to get the total no of entries byststus u can use the fllowing query.
select status, count(1) as
current_number from sap[sid]db.xi_af_msg
group by status;
regards,
navneet

CPALookupException while sending a Test message to Adapter engine

Hello Experts,
I am getting following exception while sending a test message to Adapter engine through Runtime Workbench.
Error while sending message: com.sap.engine.interfaces.messaging.api.exception.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve outbound binding for the given P/S/A values: FP=<Configured Party>;TP=;FS=<Configured Communication component>;TS=;AN=<Configured Outbound Interface>;ANS=<Configured Namespace>
This scenario works fine when I submits the message through Integration engine. So ID configuration is perfect. Also cache contents are upto date.
Thanks in advance.
Regards
Rajeev

Error is clearly saying that it is unable to find receiver agreement for that particular interface.
Please check your receiver agreement for the interface.
If your receiver agreement is fine then do CPA cache refresh using following URL:-
http://<host>:<port>/CPACache/refresh?mode=full

Automatic restart of Error-Message in Adapter-Engine (Job?)

Hi,
we are working on PI 7.11 and facing following problem:
Often in message-monitoring error-messages are forgotten because of wrong date-selections by the monitorer (not enough days back). It would be very nice, if there is a function witch is repeating error-messages in adapter-engine automaticly and witch can be scheduled.
Does anybody know something about an excisting program / function on PI?
Regards
Jürg

Hi,
By default if any failure occurs in adapter engine (in case of receiver,during delivery to target system)
it will retry 3 times after a period interval of 5 minutes..this is by default even this can be change if needed with the help of the proeprties at NWA/VA...
but in case of failures at IE level (mappings,...) then you need to schedule the report RSXMB_RESTART_MESSAGES....
search SDN if like to know more about the reports...
HTH
Rajesh

PI 7.1 - Message Monitoring - Adapter Engine (Database Overview)

Hi Friends,
In Message Monitoring --> Adapter Engine --> Database (Overview) is not working. It throws the following error message.
no_connection Exception Message: RemoteException in Method: CentralViewManager: getIProfiles( IApplication, boolean ). Communication-related failure. Message: java.rmi.RemoteException: Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.wsdl2java.ClientProtocolException: An error occured while reading data from the destination sap.com/com.sap.aii.af.service.profile.proxy/com.sap.aii.af.service.statistic.proxy.ProfileProcessor/basicPort_Document. The error was: com.sap.security.core.server.destinations.api.DestinationException An error occurred while reading the destination sap.com/com.sap.aii.af.service.profile.proxy/com.sap.aii.af.service.statistic.proxy.ProfileProcessor/basicPort_Document, type WebService. The error was Internal error during the decryption process...
But, Adapter Engine --> Database option is working. What could be the problem ?
Kindly clarify, friends.
Kind regards,
Jegathees P.

Hello friend,
May be it is related with connection problem check with your basis people .
Regards,
Ravi.

Can anyone tell me how to see old devices that I had on my itunes account.

Well my apartment was broken into and I cant find some of the reciepts to my items like my ipad and my two ipods. can anyone tell me how i can see old items that were on my itunes account?

You can change the play order of playlists.
Put the songs in the order you want.
Right click on the playlist name and select Copy to Playlist order.
Then sync the iPod.

Problem With Seeing Message in Adapter Engine

Hello Everyone,
We are facing a strange problem while running an Integration Process, BPM in PI. In the process, we are trying to read a .CSV File and convert it into a .XML File via FCC. The .CSV file is placed in the XI box itself, under a certain directory. We have configured the process such that whenever the .CSV file is read, its attributes are set to 'read only'. After configuring the process, the required XML file did not show up. So we checked that whether the .CSV file was read and it showed up attributes of 'read only'.We cross checked
 -First by going to SXMB_MONI; here it said 'No messages available for selection'
 -Then by examining the 'channel monitoring' in AE; where we found both the sender and receiver channel are showing green. The sender channel first shows up that 'Processing started' and then 'Processing Completed Successfully'. The receiver channel does not show up any messages.
 -we checked for the XML messages that are in the Adapter in IDX5; it shows 'no messages selected'.
 -We anticipated that it may be a cache problem and cleared all the caches; but when we tried to clear the Adapter Framework Cache, it popped up an authorization error and the problem persisted.
We are using NW2004s with SP6 at the ABAP and BASIS stack and SP 9 at the Java Stack. Also, all the required connections made in SM59 are in order.
Now, What can be the problem? Is it the difference in SP level that is causing the problem? Or is it something else? What have we missed? Guys, please help us solve this problem.
Need Help. Pleae Reply. Points will be awarded.
Thanking in anticipation.
Amitabha

Hi Shabarish,
1.Document name is indeed the name of message type in our case.
2. We did not use delete mode; but once the file was read- we manually changed its attributes from 'RA' to 'A'..and it became 'RA' again after 2 seconds; which is our polling interval.
3. And we have discovered that the file is being read properly..because we can see the XML payload of it and it contains the correct data.But still it does neither show up in SXMB_MONI..nor in IDX5.
Can you please tell us what are the necessary roles for the User PIAFUSER? We suspect that somewhere's an authorization error we are getting; because the AF cache refresh attempt shows "Forbidden" and we are getting an error in Tcode SXI_SHOW_MESSAGE as:
AE_DETAILS_GET_ERROR: no_adapter_engine_found: Unable to find Adapter Engine:; Stack trace shows:Error while reading access data (URL, user, password) for the Adapter Engine

EO Messages with Delivering Status in Adapter Engine

Hi All,
We have a scenario DB-DB Asy with Java Proxies. Proxies are there to accept the messages from Sender DB and insert in target DB. Get the response from target DB and insert back that to Sender DB.
Actually the scenario is Syn, but we made it as Asynchronous by implementing Java Proxies.
Now we are using EO mode in Sender JDBC channel. We have 17 interfaces in the similar pattern. We are using one common XI receiver channel for all these 17 interfaces.
If one message got struck, then rest other Proxies are not getting triggered and not able to resend the message ( ofcourse I know I cannot resend with Delivering Status). But not sure what causes the messages to failed with Delivering Status mode.
Any pointers would be highly appreciated.
Will increase of Parallel Queues really solve my problem? If it fails in Prod, its a big problem for us as we dont want to lose the data. Now everytime we are restarting the Message service server.
Regards,
Srinivas

Normally if there is any problem in target then you will see the adapter engine message as delivering
after the no of retires set then status will go to system error
during this entry check the CC used what is the error causing for that ?
HTH
Rajesh

How can I find sync message in Adapter Engine Table

Hi,
I see async message in Table(XI_AF_MSG , XI_AF_MSG_AUDIT)
But don't see sync message.
Where is sync message stored in Adapter Engine?
Can anybody help me!!

Hi,
Refer this Doc..
http://help.sap.com/bp_bpmv130/Documentation/Operation/TuningGuide.pdf
regards,
vasanth.

How to see old successfully delivered messages in Adapter Engine

Similar Messages

Maybe you are looking for