How to select Card manager on Default JavaCard simulator from NetBeans 7.2

Hi
I'm trying to resolve three questions
1) to find FAQ/Manual about simulator included into 3.0.2 JavaCard Connected platform
2) which commands for Card Manager of simulated default JavaCard are supported
3) how to upload simple applet (ex. HelloWorld from JavaCard 3.0.2) using Card Manager applet simulated on Default javaCard Connected platfrom simulator available from NetBeans 7.2
Thaaaanks

From my understanding, NetBeans uses the CREF executable from the JCDK for simulation. You can check the documentation (developer guide etc) from the JCDK for more details. The CREF emulator uses a custom applet loader so it does not use standard GP commands and will be different to a real card. As for loading your applet, you should be able to run from NB and it will start your emulator and deploy your code. I do not use netbeans so cannot really comment further.
- Shane

Similar Messages

Unable to select Card Manager or invalid FCI

Hi,
I have JCOP41V231 but I can not upload the CAP file.
When I try to select the Card Manager I get an error 6A82.(see trace bellow)
I asked the card supplier and he answer:
"our all samples have not initialized. so you can cannot select the card manager.
if the card have not initialized, and you can select wrong card manager, the card will be damage.
please initialize the card."
How can I initialize the card ?
Is there a special tool to do that?
/term "winscard:4|SCM Microsystems Inc. SCR33x USB Smart Card Reader 0"
--Opening terminal
/card -a a000000003000000 -c com.ibm.jc.CardManager
resetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B FA 13 00 00 81 31 FE 45 4A 43 4F 50 34 31 56 ;.....1.EJCOP41V
32 33 31 97 231.
IOCTL().
ATR:
T = 1
=> 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
(9682 usec)
<= 6A 82 j.
Status: File not found
jcshell: Unable to select Card Manager or invalid FCI: Unknown Global Platform Java Card.
Subsequent commands might fail! Inspection might not be possible!
??> set-key 1/1/DES-ECB/404142434445464748494a4b4c4d4e4f 1/2/DES-ECB/404142434445464748494a4b4c4d4e4f 1/3/DES-ECB/404142434445464748494a4b4c4d4e4f
??> init-update 1
=> 80 50 01 00 08 0A D3 1F 2B 09 F1 CD E2 00 .P......+.....
(8444 usec)
<= 6A 81 j.
Status: Function not supported
jcshell: Error code: 6a81 (Function not supported)
jcshell: Wrong response APDU: 6A81
Unexpected error; aborting execution

Hi,
I think that you didnt prepersonalisation. Once pre-personalisation you can enter card manager.

HOW TO SELECT MIN VALUE UNDER DEFAULT TAG OF SELECT LIST

GREETINGS,
I M USING APEX 4.1 AND CREATED SELECT LIST ON PAGE, I WANT TO SHOW MIN VALUE OF THE SELECT LIST FOR THAT I WROTE IN THAT SELECT LIST PROPERTIEC UNDER DEFAULT TAG MIN; AND CHOOSE PL/SQL EXPRESSION BUT ITS GIVING ERROR "Error computing item default value for page item P1_PRODUCT."
BUT IF I HARCORE THE VALUE CONTANING IN MY DATA LIKE PRODUCT ID = 1, I HARDCODED IN DEFAULT VALUE 1 AND SELECT PL/SQL EXPRESSION IT WORKS.
BUT ITS NOT DONE LIKE THIS I WANT TO SELECT BY DEFAULT MIN VALUE OF THE SELECT LIST, SO THAT THE DATA SHOULD BE DISPLAYED ACCORDING TO THAT.
THE EXACT REQUIREMNT IS TO ENTER THE SELECT LIST DEFULAT VALUE IN SESSION SO THAT DATA IS TO BE DISPLAYED

Hi,
you have some options:
1) you can try setting default value of P1_SELECT_PRODUCT item, I was do it
2) or you can try send the value of P1_SELECT_PRODUCT value in URL, like this:
http://apex.oracle.com/pls/apex/f?p=45296:1:0::::P1_SELECT_PRODUCT:4
3) or you can set the session state of P1_SELECT_PRODUCT item on page 101 (login page) by seting this value in Login process on page 101
HELLO kIAS !
SETTING DEAFULT VALUE VALUE OF P1_SELECT_PRODUCT_ITEM IS NOT A SOLUTION ON THIS MATTER, BECASUE P1_SELECT_PRODUCT IS CALLED DYNAMICALY AFTER THE LOGIN DEPEND UPON THE RIGHTS OF THE USER THE SELECT IS POPULATED ID USER IS E.G ABC AND IT DOESBNOT CONTAIN SELECT LIST VALUE 4 THEN IT DISPLAY NOTHING.
AND THIRD POINT MAY BE HELP ME BUT I DONT KNOW HOW TO SET SESION STATE BECASUE WHEN I GO TO LOGIN PAGE AND CREATE SESSION STATE PROCESS FOLLOWING RADIO BUTTOPN APPEARS
Clear Cache For Applications (removes all session state for listed applications)
Clear Cache For Current Application (removes all session state for current application)
Clear Cache For Current Session (removes all state for current session)
Clear Cache for Items (ITEM,ITEM,ITEM)
Clear Cache for all Items on Pages (PageID,PageID,PageID)
Reset Preferences (remove all preferences for current user)
Set Preference to value of Item (PreferenceName:ITEM)
Set Preference to value of Item if item is not null (PreferenceName:ITEM)
WHICH ONE I HAVE TO SELECT ?

How disable internet download manager's video download option from my youtube videos?

Hi to all
i want disable IDM(internet download manager)'s download video option from my youtube videos.
please tell me is there any process to do that?
any another mothods also cann't download my youtube videos.
THANKS IN ADVANCE

you are using youtube API so the question is that you can't do anything as they'll continue using HTTP protocol which is stateless and thus can be downloaded !
A workaround you can do is to make browser detection script in javascript which will detect presence of IDM Plugin ... Once you detect the presence of IDM then you can disable the video embedding and not enable it till the user manually disables the IDM Plugin

Have 2 Printers, How to select different one as default?

Hi there,
Our office has two printers, an HP officejet 8600 and an HP officejet 7500 E910. My colleague and I originally only had the driver software for the 8600, and are both connected wirelessly to both printers. In order to print A3 size paper, we downloaded the driver software for the 7500. Now both of our computers automatically use the 7500 printer as the default. This is no good because it is our bosses printer, which is often in a locked office and we don't want to waste the ink or paper if we can't access it etc. etc and aren't thinking to select the 8600 printer.
So my question is, how can we make our computers automatically select the 8600 as our default printer?
Thanks
R
This question was solved.
View Solution.

What operating system? In Windows 7 you would click Start, Devices and Printers, right click on the Officejet Pro 8600 and select "Set as default printer". Other Windows operaing systems would be similar, I do not know about Mac.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How to use the windows phone default media player from my app

hello every one,
I build a windows phone 8 app , and i used this code, to play a video in the phone media player (didn't want to use MediaElement)
using Microsoft.Phone.Tasks;MediaPlayerLauncher mediaPlayerLauncher = new MediaPlayerLauncher();
i just see that in windows phone 8.1 i can't use this namespace and a lot of others, (I didn't understand why...)
and i want to lunch a video in the phone media player instead using a MediaElment
how can i do it?
thanks,
Or

Hi Or,
Using
Launcher class is fine (not sure if you are playing with 8.1 Silverlight or runtime), you can launcher default system app by following code:
var success = await Windows.System.Launcher.LaunchFileAsync(file);
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

URGENT: How to selectively migrate composite instances and task data from one env to another

Gurus,
We've come across a situation whereby we need to migrate instance data (including Human Task related) of some specific composites from one environment to another.
(Environment is equivalent here to a different domain installation on different physical server.)
Is this possible in some standard way like using Oracle import-export utility or script?
If not, how can this be achieved?
Thanks in advance for any help you can provide on this.
With regards-
Ashish

Hi,
If your SharePoint environment supports InfoPath Forms, then you can customize the form and add rules to make the list items as read only when user A submits the form.
you can then write a form load event to check the logged in user using username() function. This logic can be implemented in variety of ways, like setting a flag when User A submits the form, or storing user A username in a form variable etc., else comparing
User A and User B values within form Load event.
Another way of doing this is using Views or grouping all of the User A fields within a section etc.,
The above would take care of Form logic, and for the workflow, you can use SharePoint designer to create a custom workflow, where it will run on onItemCreate and onItemChange events.
The logic for workflow would be if the form Submitted for the first time, the workflow will start and send an email to User B, and when User B submits the Data then onItemChange change event will start the workflow to send an email to approver to approve
the data.
here are some links for your reference -
http://office.microsoft.com/en-us/infopath-help/add-formulas-and-functions-in-infopath-2010-HA101821255.aspx
http://office.microsoft.com/en-us/videos/video-create-an-approval-workflow-in-sharepoint-designer-2010-VA101897477.aspx
http://blogs.technet.com/b/meacoex/archive/2010/11/01/get-manager-approval-in-sharepoint-designer-2010-step-by-step.aspx
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

How to select max (field) and one more field from table?

Hi experts!
I need to select maximum value of ENDDA from PA0023 and BRANC of max ENDDA.
How can I do that ?
When I trying this code:
This is the code:
SELECT MAX( endda ) branc
FROM pa0023
INTO (pa0023-endda, pa0023-branc).
I get error message:
The field "PA0023~BRANC" from the SELECT list is missing
in the GROUP BY clause. Addition INTO wa or INTO (g1,...,gn) is required.
So what is the problem?
Thanks forehead.

Hi
Though am not totally sure of your requirement, check below code samples without any syntax errors:
1. As per you current coding:
TABLES: pa0023.
SELECT MAX( endda ) branc
       FROM pa0023
       INTO (pa0023-endda, pa0023-branc)
       GROUP BY branc.
ENDSELECT.
2. Above code results only on one record where as the criteria can be more than one. Eg: for a specific data more than one record can exist. Below code helps you handle the same:
TABLES: pa0023.
TYPES: BEGIN OF t_pa0023,
         endda TYPE endda,
         branc TYPE brsch,
       END OF t_pa0023.
DATA: i_pa0023 TYPE TABLE OF t_pa0023,
      wa_pa0023 TYPE t_pa0023.
SELECT MAX( endda ) branc
       FROM pa0023
       INTO TABLE i_pa0023
       GROUP BY branc.
LOOP AT i_pa0023 INTO wa_pa0023.
ENDLOOP.
3. If the requirement is to get the Industry Key for the record with highest End Date. We can acheive it by using subquery something like:
TABLES: pa0023.
SELECT SINGLE endda branc
       FROM pa0023
       INTO (pa0023-endda, pa0023-branc)
       WHERE endda = ( SELECT MAX( endda ) FROM pa0023 ).
Kind Regards
Eswar

How can I change my Iphone default email send from an alias to the address I want?

My Iphone sends my emails "FROM" an alias address I have within my ISP email account. I don't want this alias to be used as the default send. It seems my IPad works fine as does my Imac and Macbook PRO. The Iphone is the only one that does this.
Any help will be greatly appreciated.
thanks,

Open iTunes on your Mac, click "iTunes Store" on the upper right, then click "Account" on the middle right. Sign in there. That will make the signed in account the "primary".

How to Use Solution Manager to collect Status Reports from Consultants

Hi,
I am planning to use Solution Manager for collecting the weekly status reports from my consultants and maintain it as a repository . Please let me know the best way of doing this in SOLMAN. There should be mailing options too.
BR,
Raj

Hi Rajasan,
to be able to meet this requirement, you need to set up plan working load in admin tab for your resource, they need to update actual data based on the work completion, you will get status of work,
if you require email, you need to set-up scot, then develop a program with execution scheduling
please check and revert
Anil

Help: How to get rid off the default Window menu from FORM screen?

Hi,
I am working on a FORM application. On the very top left of the FORM screen, there is a default Window menu with:
Cascade
Tile Horizontally
Tile Vertically
etc.
The end user will never use it for this application. To make the screen look nicer, is there a way to hid or get rid off it?
Also if possible, I want to hid or get rid off very top "Oracle Developer Forms Runtime - Web"
Thanks.
Jimmy

Also if possible, I want to hid or get rid off very top "Oracle Developer Forms Runtime - Web"I see you are running with separate frame. In the When-new-form-instance trigger, use
Set_Window_Property(Forms_MDI_Window, Title, "xyz" );
to change the window title.

How can I remotely manage boss's iPhone 5 from Mac?

I work for a world renowned artist managing all data including that on his iPhone 5. Is there a way to manage apps, storage space, and configurations remotely?

No.

Unable to access to GemXpresso Card Manager with JCOP 312 pluggin

Hello all,
I´m using JCOP 312 to install applets in GemXpresso 211 cards but I´m not able to achieve it. Before I achieved to install applets with JCOP 312 in JCOP 211 cards without problems. I read in others threads of this forum that it´s possible to install applets in GemXpresso cards with JCOP using com.ibm.jc.GX211CardManager class in JCOP configuration in addition to change Card Manager AID.
I don´t have the com.ibm.jc.GX211CardManager class so I can´t test this issue. does anyone have this class? I woul´d very appreciated if anyone could pass me this class.
I don´t know no other form to use GemXpresso cards with JCOP 312 eclipse pluggin.
Thanks in advance.

Yes Safarmer, this is the point, "to determine what these setting are" :-). I know to configure JCOP plugin parameters in accordance with javacard type,
but the problem is find out values of these parameters (AID Card Manager, key values,...).
Steps I do to test JCOP cards are depicted below:
/card -a a000000003000000 -c com.ibm.jc.CardManagerresetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B 66 00 FF 4A 43 4F 50 32 30 ;f..JCOP20
ATR: T=0, N=-1, Hist="JCOP20"
=> 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
(92851 usec)
<= 6F 19 84 08 A0 00 00 00 03 00 00 00 A5 0D 9F 6E o..............n
06 40 51 30 23 20 17 9F 65 01 FF 90 00 [.@Q0|mailto:.@Q0]# ..e....
Status: No Error
cm> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
cm> init-update 255
=> 80 50 00 00 08 FA 65 9D CE FA 89 4B BC 00 .P....e....K..
(116982 usec)
<= 00 00 61 73 02 05 76 90 99 52 FF 01 0D A4 66 E3 ..as..v..R....f.
7F D6 2E 15 C5 D3 3D 2A C0 69 98 AE 90 00 ......=*.i....
Status: No Error
As you see, there isn´t any problem to access to this card with JCOP.
Steps I do to test GemXpresso cards are depicted below:
/card -a a000000003000000 -c com.ibm.jc.CardManagerATR: 3F6D000080318065B00501025E83009000
ATR: T=0, N=0, Hist=80318065B00501025E83009000
jcshell: Unable to select Card Manager or invalid FCI: Unknown Global Platform Java Card.
Subsequent commands might fail! Inspection might not be possible!
??> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
??> init-update 255
jcshell: Error code: -5 (Authentication failed)
jcshell: Wrong response APDU: 434D03070001297400BD0D019EED3933FC1384F99315DD3552508A529000
Unexpected error; aborting execution
As you see, there are problems to access to this card with GemXpresso card, basically it´s not be able to select Card Manager.
I know I should to change AID Card Manager and Card Manager class to this: "/card -a A000000018434D - c com.ibm.jc.GX211CardManager" but the point is
I don´t have GX211CardManager class. Moreover I don´t know values of the keys to use with this cards type.
Regards.

How to Change the Default SSH Port from Terminal ? now showing default SSH Port 22 i need change it pls help me how can do

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

How to select all the colomns_names from a table, with their datatypes ..

hi :)
i would like to know, how to select in SQL all the columns names from a table with their datatypes so that i get something like this :
Table 1 : table_name
the column ID has the Datatype NUMBER
the column name has the Datatype Varchar2
Table 2 : table_name
the column check has the Datatype NUMBER
the column air has the Datatype Varchar2
and that has to be for all the tables that i own ! ..
P. S : i m trying to do this with java, so it s would be enough if you just tell me how to select all the tables_names with all their colums_names and with all their datatypes ! ..
thank you :)
i ve heard it can be done with USER_TABLES .. but i have no idea how :( ..
Edited by: user8865125 on 17.05.2011 12:22

Hi,
The data dictionary view USER_TAB_COLUMNS has one row for every column in every table in your schema. The columns TABLE_NAME, COLUMN_NAME and DATA_TYPE have all the information you need.
Another data dictionary view, USER_TABLES, may be useful, too. It has one row pre table.

How to select Card manager on Default JavaCard simulator from NetBeans 7.2

Similar Messages

Maybe you are looking for