Unable to access to GemXpresso Card Manager with JCOP 312 pluggin

Hello all,
I´m using JCOP 312 to install applets in GemXpresso 211 cards but I´m not able to achieve it. Before I achieved to install applets with JCOP 312 in JCOP 211 cards without problems. I read in others threads of this forum that it´s possible to install applets in GemXpresso cards with JCOP using com.ibm.jc.GX211CardManager class in JCOP configuration in addition to change Card Manager AID.
I don´t have the com.ibm.jc.GX211CardManager class so I can´t test this issue. does anyone have this class? I woul´d very appreciated if anyone could pass me this class.
I don´t know no other form to use GemXpresso cards with JCOP 312 eclipse pluggin.
Thanks in advance.

Yes Safarmer, this is the point, "to determine what these setting are" :-). I know to configure JCOP plugin parameters in accordance with javacard type,
but the problem is find out values of these parameters (AID Card Manager, key values,...).
Steps I do to test JCOP cards are depicted below:
/card -a a000000003000000 -c com.ibm.jc.CardManagerresetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B 66 00 FF 4A 43 4F 50 32 30 ;f..JCOP20
ATR: T=0, N=-1, Hist="JCOP20"
=> 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
(92851 usec)
<= 6F 19 84 08 A0 00 00 00 03 00 00 00 A5 0D 9F 6E o..............n
06 40 51 30 23 20 17 9F 65 01 FF 90 00 [.@Q0|mailto:.@Q0]# ..e....
Status: No Error
cm> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
cm> init-update 255
=> 80 50 00 00 08 FA 65 9D CE FA 89 4B BC 00 .P....e....K..
(116982 usec)
<= 00 00 61 73 02 05 76 90 99 52 FF 01 0D A4 66 E3 ..as..v..R....f.
7F D6 2E 15 C5 D3 3D 2A C0 69 98 AE 90 00 ......=*.i....
Status: No Error
As you see, there isn´t any problem to access to this card with JCOP.
Steps I do to test GemXpresso cards are depicted below:
/card -a a000000003000000 -c com.ibm.jc.CardManagerATR: 3F6D000080318065B00501025E83009000
ATR: T=0, N=0, Hist=80318065B00501025E83009000
jcshell: Unable to select Card Manager or invalid FCI: Unknown Global Platform Java Card.
Subsequent commands might fail! Inspection might not be possible!
??> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
??> init-update 255
jcshell: Error code: -5 (Authentication failed)
jcshell: Wrong response APDU: 434D03070001297400BD0D019EED3933FC1384F99315DD3552508A529000
Unexpected error; aborting execution
As you see, there are problems to access to this card with GemXpresso card, basically it´s not be able to select Card Manager.
I know I should to change AID Card Manager and Card Manager class to this: "/card -a A000000018434D - c com.ibm.jc.GX211CardManager" but the point is
I don´t have GX211CardManager class. Moreover I don´t know values of the keys to use with this cards type.
Regards.

Similar Messages

I am unable to access rotten tomato film clips with safari

I am unable to access rotten tomato film clips with Mac 10.6.8 with Safari server 5.1.10 Only a black screen shows. I have latest version of Adobe flash installed. I have allowed in my Safari preferences to allow Java and all other plug ins.

Safari 5.1.10 is not being updated and doesn't meet all current web requirements. Try another browser as a test.
Firefox

HT204266 I have redeemed points on my account but, when I try to buy a song I tunes doesnt use them it tries to access the credit card associated with the account for payment.

I have redeemed points on my account but, when I try to buy a song I tunes doesnt use them it tries to access the credit card associated with the account for payment. How do I tell this thing to use the points instead. duh

By 'redeemed points' I assume that you mean that you've redeemed an iTunes gift card onto your account (?). If you do then are you trying to buy songs for yourself or are you trying to gift them - you can only gift items from a credit card, an account's balance can't be used for gifting. If you are buying for yourseflt and you are being asked to enter/verify a credit card number then are you currently in the country where your iTunes account is based ?

I am curently unable to access facebook or google blogger with firefox.

I can currently unable to access blogger (page blank ), facebook (page is disordered) and my gmail account (won't load) on firefox, but can on Chrome. This problem emerged suddenly; I could access these pages fine until a couple of days ago.

hello, try to [[Clear the cache - Delete temporary Internet files to fix common website issues|clear the cache]] & [[Delete cookies to remove the information websites have stored on your computer|cookies from google.com/facebook.com]] and reload the pages. if this doesn't solve the issue, also go through the steps covered in [[Websites look wrong or appear differently than they should]]...

Unable to access my Administrator User Account with my CORRECT password.

The correct password for the Peter Thiess Administrator User account is bandicoot. All I get is the jiggle. I managed to change the password for the account by booting up with OS X Installer disk with the "C" key. Went to Utilities - reset password. Changed password in appropriate fields, added a hint and clicked Save. When I logged on again, the account accepted the new password with the note:
"you are unable to log in to the user account Peter Thiess at this time"...and THEN the screen jiggled.
Still no access to all my main stuff including my iTunes library that I built over the past 4 yrs.
Some weeks ago I opened my secondary acct. (Peter Alexander), which I created for house guests to play. Since I never use this account, I wanted to refresh my memory as to what I had on it. While I was here, I decided to delete "cache" and "cookies" from 2 libraries in the account. I also placed 2 or 3 folders that "seemed" empty (0Mb was in the bottom of the window of the files) in the trash. I don't remember where I plucked those folders from, from Peter Alexander acct. (If a folder is in the computer, even if it seems empty - there must have been a reason for it to be there.) Put them all in Trash and chose the Secure Delete Trash. The beachball started spinning...too long. Attempted to Stop Emptying Trash, so I could swith over to plain old Empty Trash and be done with it. Wasn't allowed to and the beachball kept spinning. This was taking too long, and I wanted to log into my main Peter Thiess Administrator account again. Attempted Restart - spinning ball. Attempted Shut Down, Log Out Peter Thiess, and Force Quit...more spinning bball. Finally I just held down the Power button. That turned it off.
Rebooted. Went back to the Peter Alexander account to finish emptying Trash. Trash finally emptied. Clicked Restart, got back to the opening window with both my accounts listed and clicked
Peter Thiess this time. Entered correct password and got "Peter Thiess does not have account privileges at this time" Tried several times, same result each time. Went to Help, then System Prefs, and finally Accounts, and discovered the Peter Thiess Administrator account was de-selected (gray instead of black lettering)?? Anyway, I tried several more times with my known, positively password-then tried some variations until the window "you tried passwords too many times, try again later".
Took the laptop to the MacSupportStore in Brooklyn, and due to a misunderstanding had the password to the Peter Alexander account, instead of the Peter Thiess account changed. When this mistake was pointed out, they investigated the correct account this time and told me the HD is dying, and that it would cost @ $400 for data rescue/retreval and a new HD. Not having any discretionary funds, I opted to get a Mercury external 500Gb HD instead. I want to rescue my data from my Peter Thiess Administrator account before the internal HD totally gives up the ghost. Suggestions? With deepest appreciation, Peter Thiess (alias - joblo22)

>spins round a few times and then requests them again
Mac Spinning Wheel https://forums.adobe.com/message/5470608
-Similar in Windows https://forums.adobe.com/message/5853430
or
Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
-and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
-and 'looping' https://forums.adobe.com/thread/1504792

Unable to access the Oracle Enterprise Manager for Application Server 10g

Hi,
can an one help me in accessing the Application server enterprise manager console?
I started the enterprise manager using the command "emctl start iasconsole" from bin. it started the OEM 10g AS control. when I am trying to access the site it throws an error saying "The page cannot be displayed". can any one tell me how to trouble shoot the scenario.
The installation was on Unix.
Regards,
Jay.

I would try,
1. If your installation is on RedHat or linux varient make sure that the Apache from the linux is not running, (httpd is stopped)
2. check the hosts file verify that it contains the ip and (appserver name) not just the loopback.
3. make sure you are using the :1810 port
also, check the logs using a tail to see if your having errors in the network card binding.

Unable to pair BB Smart Card Reader with Pc/Laptop

Hi, I have 2 new BB smart card readers (SCR) and Im trying to pair with the PC and I can not. The SCR software can not detect the SCR. I put the ID of the device on the software and is trying to looking for it but can not. It says "Unable to connect to the specified Blackberry smart card reader". I have another SCR and I don't have problems to pair with the computer only with the new ones. The SCR have the last OS. Do you know what could be the problem? I think is a bug of the new SCR.

mzamora wrote:
Andy, may be nothing so where can I post it? Is there a general discussion?
Hello,
if I were you, I'd post in the "General Blackberry Smartphone Functions and Features" forum.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

IronPort WSA with Authentication unable to access 2 character domain names with 2 character TLDNs

I've discovered an issue requiring user authentication and some of the short url sites likes e2.ma will not load in Internet Explorer explicitly configured to go through an IronPort WSA. In testing with bogus domains (a.to, aa.to) it seems the issue is if the domain name is 1-2 characters and the top level domain name is also 2 characters long. Longer domains (aaa.to) work and return an IronPort error for DNS_FAIL. Does anyone know of a workaround to not have to allow all these as unauthenticated destinations?

Support pointed me towards that KB article as well, but it is for IE 5 (and fixed in IE 6), but IE 8+ uses a TLD list from Microsoft (visible by using res://urlmon.dll/ietldlist.xml) and I don't control the external website. I'm going to try using an IP address surrogate instead of session cookies for these domains and see if that resolves this.

Unable to access Oracle VM Manager from browser

Hi,
I am unable to access the Oracle VM Manager from my browser at any of the url's e.g. /em; /OVS; /apex
I can connect to my server via putty, so I know the IP address that I am using is correct.
In the /var/ovm-manager/oc4j.log file I get the following message:
ERROR J2EE HTTP-00004 Internal error raised tyring to instantiate web-application: webapp defined in web site OC4J 10g (10.1.3) Default Web Site. Application: datatags does not exist. Error creating Web application: webapp
The oc4j service is running and the ovs-agent service is running but I cannot connect.
I am new to Oracle VM and Linux for that matter so it is entirely possible that something is not configured correctly somewhere
I'll appreciate it if anyone can assist
Thanks

Try this command from the console or SSH to the server:
service iptables stop
If you can then access the URLs you will need to modify iptables to allow port 8888
I think this is the command:
iptables -I INPUT -p tcp --dport 8888 -j ACCEPT
then:
service iptables start
Then try to connect again.

Lenovo G50-30 Unable to access BIOS settings after Windows recovery

Hi
I recently 'downgraded' a recently purchased Lenovo G50-30 with preinstalled Windows 8.1 to Windows 7 using a UEFI USB install on a GPT partition. I also updated the BIOS from A7CN40WW to the latest A7CN43WW and all was working fine. However, after performing a necessary restore of an system image created using the Windows 7 backup and restore tool, I am suddenly unable to access the BIOS settings, either with the novo button (I do get the menu to select BIOS) or with Fn +F2. All that happens is that I receive a blank screen with a static cursor in the upper left corner. I can however still access the boot menu Fn +F12. This is a particular pain as I obviousl can't select USB 3.0 in BIOS.
Any help here would be greatly appreciated.

OK, I managed to clear CMOS by disassembling and desoldering a leg off the the RTC battery but to no avail. The problem seems to be that BIOS a7cn43ww itself has somehow been corupted. In theory this should be able to be resolved by a reflash. The trouble here is there seems to be no way to reflash with a current or previous BIOS version, so I'll have to either wait for a newer version or someone may know better.
C'mon Lenovo support this simply isn't good enough. It's a brand new laptop and I'm considering returning it for a refund.

Unable to access following end point(s)

Hi All,
I am facing very strange thing in my BPEL.
Third party is sending message to my SOA BPEL process.Starting point of the (input variable place) is not showing the message for some inputs from third party.For some input messages of third party, BPEL is taking messages properly and it is also showing messages.It is also executing whole process propely.
But some For some inputs(problem related inputs)It is showing below thing at the input message(receive activity):
<message>SOA returned no detail.</message>
But That BPEL process is having further transform and assign activities in that.The contents of the message is coming in those activities (but strange thing is it is not coming in BPEL intial activity.).
Note : What I observed from some input messages(for BPEL that I am getting problem) , payload size is very high.So SOA is not able to show or load messages properly.
I am also getting'
'Unable to access following end points' along with the errors'.I think it may be related SOA infra memory issue'
Please help me in this as I am stuck in production issue.It is very urgent.
Is there any way I can make my BPEL try access large payloads? I think it is the problem of not accepting large payloads.

Hi karan,
Thank you very much for your reply to my question.I will also try to change the message size by informing my client SOA admin people according to you.
Regarding the scenario that you are asking , I already mentioned clearly above(When I first posted this question).Anyways I am again copying those details below:
Starting of Scenario explanation:
I am facing very strange thing in my BPEL.
Third party is sending message to my SOA BPEL process.Starting point of the (input variable place) is not showing the message for some inputs from third party.For some input messages of third party, BPEL is taking messages properly and it is also showing messages.It is also executing whole process propely.
But some For some inputs(problem related inputs)It is showing below thing at the input message(receive activity):
<message>SOA returned no detail.</message>
But That BPEL process is having further transform and assign activities in that.The contents of the message is coming in those activities (but strange thing is it is not coming in BPEL intial activity.).
Note : What I observed from some input messages(for BPEL that I am getting problem) , payload size is very high.So SOA is not able to show or load messages properly.
I am also getting'
'Unable to access following end points' along with the errors'.I think it may be related SOA infra memory issue'
Please help me in this as I am stuck in production issue.It is very urgent.
Is there any way I can make my BPEL try access large payloads? I think it is the problem of not accepting large payloads.
ending of Scenario explanation:

Debug STK applet with JCOP 3.0

Hi all
i want to debug my STK applet with JCOP tools in eclipse plugin.but somehow i am not able to debug my SIM toolkit with JCOP.
first ques , is it possible?
right now i m debuging in manu project---->debug
then i m choosing java card application to debug,but its not working:(
how can i proceed step by step for debuging?
one more ques,
is it possible to load applet on java card only with JCOP tools?(means without any s/w like views professional or aspects developer.)
Regards
Divyesh.

Hi all.
I'm having the same problem. I know that a html file is created everytime the applet is invoked (clicking on debug or run) with a diferent name to be called as argument of appletviewer.
But I will join to the question... How can we use our testpage to do a test of a devel applet?
Because mine has to be used with javascript and it's very difficult to test it without a custom test page or appletviewer...
Thank you all

I am unable to access my email. I can sign in with my password, then a message comes up that says "The plug-in for this page has been disabled. Click here to manage your plug-ins." All plug-ins listed are enabled. What am I missing?

I am unable to access my email from Charter.net. I can sign in with my password, then a message comes up which says "The plug-in for this page has been disabled. Click here to manage your plug-ins." All of my plug-ins are enabled. What am I missing?

After a great deal of searching I ran across the suggestion to disable all plug-ins and then, one by one, enable them until finally the problem was solved. I am not sure which plug-in was causing the problem, as I am satisfied to have the problem solved. I am going to leave the rest of the plug-in disabled.

Please help! I'm unable to access content on my iPod Classic while it is connected to iTunes. The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).

I'm unable to access content on my iPod Classic while it is connected to iTunes.
The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).
I can click the tabs Music, Movies etc. but I can't see anywhere to access the files themselves, no music or movies are listed, I only have the option to 'Sync' with the iTunes, which I don't want to do as there is no content on the iTunes!!!
I just downloaded the iTunes program.
Very confused, pleaseee help ...

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Unable to select Card Manager or invalid FCI

Hi,
I have JCOP41V231 but I can not upload the CAP file.
When I try to select the Card Manager I get an error 6A82.(see trace bellow)
I asked the card supplier and he answer:
"our all samples have not initialized. so you can cannot select the card manager.
if the card have not initialized, and you can select wrong card manager, the card will be damage.
please initialize the card."
How can I initialize the card ?
Is there a special tool to do that?
/term "winscard:4|SCM Microsystems Inc. SCR33x USB Smart Card Reader 0"
--Opening terminal
/card -a a000000003000000 -c com.ibm.jc.CardManager
resetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B FA 13 00 00 81 31 FE 45 4A 43 4F 50 34 31 56 ;.....1.EJCOP41V
32 33 31 97 231.
IOCTL().
ATR:
T = 1
=> 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
(9682 usec)
<= 6A 82 j.
Status: File not found
jcshell: Unable to select Card Manager or invalid FCI: Unknown Global Platform Java Card.
Subsequent commands might fail! Inspection might not be possible!
??> set-key 1/1/DES-ECB/404142434445464748494a4b4c4d4e4f 1/2/DES-ECB/404142434445464748494a4b4c4d4e4f 1/3/DES-ECB/404142434445464748494a4b4c4d4e4f
??> init-update 1
=> 80 50 01 00 08 0A D3 1F 2B 09 F1 CD E2 00 .P......+.....
(8444 usec)
<= 6A 81 j.
Status: Function not supported
jcshell: Error code: 6a81 (Function not supported)
jcshell: Wrong response APDU: 6A81
Unexpected error; aborting execution

Hi,
I think that you didnt prepersonalisation. Once pre-personalisation you can enter card manager.

Unable to access to GemXpresso Card Manager with JCOP 312 pluggin

Similar Messages

Maybe you are looking for