How to send a Control or frame Back(send to back)

Hi all ,
I have a Graphic Frame I want to sent this control back i.e implementing "Send to Back". How to do it progammatically from my plugin

Have a look at Arranger.
Ian

Similar Messages

How to achieve precise control of frames flv?

How to achieve precise control of frames flv?

Thanks for that suggestion, but still it did not work. I am working on a theory that certain adjustments to the embedded text pane didn't get properly propagated up the component hierarchy. I wouldn't be surprised if something broke the component communication.
The curious thing is that the scrollpane seems to know how big the viewport is, but the scrollbar finds the wrong "0" point.
I am making a little progress. I will post my solution here, if and when I find it.

How to adjust each layer so frames end at chosen position

Greetings,
How can I drag the key frames back within each of the layers below so that they all end on the final scene. Currently when I hit play, the clip runs till the last key frame and the other layers that don't run that length disappear. How can I best fix this?
Many thanks in advance

I don't know how it works if you happen to be using the newer tweens, but to have something remain as it was when its tween ended I would normally just right click the last frame that I want occupied and choose the "Insert Frame" command. That last frame would be frame 72 for what you show/want. You would need to get rid of any blank keyframes at the end which most of your layers appear to have.
Just as an example, for the layer named "layer 2, I would right click frame 67 and choose "Clear Keyframe" to get rid of the blank keyframe. Then I would right click frame 66 and choose "Remove Tween". Then I would right click frame 72 and choose "Insert Frame" That should result in the contents of frame 66 remaining thru frame 72.

HOW TO SEND XML BACK TO PRINT? (See Inside thread for more info)

Hello Everybody,
Because there is not a lot of documentation on if_fp and if_fp_pdf_object
I found out that i can retrive my PDF from the ADS with the following code:
    data:
    lo_fp                 TYPE REF TO if_fp ,
    lo_pdfobj             TYPE REF TO if_fp_pdf_object,
pdf_xstring           TYPE xstring,
    xml_data              TYPE xstring,
    lv_xml_data_string    TYPE string.
            Get FP reference
lo_fp = cl_fp=>get_reference( ).
            Create PDF Object using destination 'ADS' (<-- this is how it is defined in SM59)
lo_pdfobj = lo_fp->create_pdf_object( connection = 'ADS' ).
            set document
lo_pdfobj->set_document(
EXPORTING
    pdfdata = fp_formoutput-pdf ). " fp_formoutput-pdf is of type xstring
            Tell PDF object to extract data
lo_pdfobj->set_extractdata( )." obsolate!!!
call METHOD lo_pdfobj->set_task_extractdata( ).
            Execute the call to ADS
lo_pdfobj->execute( ).
lo_pdfobj->get_data(
IMPORTING
    formdata = xml_data ).
After this i can manipulate xml_data but dont know how to send it back to print...
Can you direct me to the solution please?
Thank you in advance,
Eran Fox
p.s.:
Component version    SAP ECC 6.0
Unicode System         No
Database system      ORACLE
Release                     10.2.0.2.0
Kernel release           700

Hi Billy
Yikes - how embarassing ! Thanks for pointing out my beginners mistake there. I've fixed my code - and also implemented the substitutions of parameters like you suggested - I like that approach.
Unfortunately the end result is no better - the line
utl_http.read_text(resp,response_text);
Still returns nothing back
The headers that are coming back are
Date: Thu, 04 Jul 2013 08:31:56 GMT
Server: Apache/2.2.16 (Ubuntu)
X-Powered-By: PHP/5.3.3-1ubuntu9.3
Expires: Thu, 19 Nov 1981 08:52:00 GMT
Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0
Pragma: no-cache
Vary: Accept-Encoding
Content-Length: 0
Content-Type: text/html; charset=UTF-8
Connection: close
I guess I will need to try chasing it with the fastsms vendor so see if they can check my incoming request and see if there are any glaring problems. I know the xml is correct as I am now logging the xml string just before I send it and when I take that string and put it in their test form it works perfectly - something else in the puzzle is missing. I've had no experience using utl_http before - perhaps it's no possible to read the xml repsonse using this ?
Anyway, thanks for your help Billy.
ps - How do you paste your code into your message to get that formatting ?
Cheers,
Brent

How to send HTML to a frame

I want to know how to send and HTML page generated by a servlet into a specific frame of the client browser.

If you are sending the data to the servlet using a form tag, just specify the target inside the form tag and your servlet will display the output in that frame.

How to send Earphones back to Apple(Warranty)??

Hi, i got a problem with my earphone.
my left earphone was garbled so i went to this website and ordered new ones for free(I still have warranty). Everything is fine so far, I got the new earphones and they work, but I don't know how to send the broken ones back. Apple said that I would get instructions how to send them back, but i didnt get any, only a letter that I dont have to pay anything because of my warranty.
So now Im trying to find out if the carrier matters and what carrier it is. I really dont know what to do. My repair status number is D10792823.
Im really mad right now because if I dont get my earphones sent to Apple I have to pay a $29 non-return fee.
Hope somebody can help me.
Marcel
(Sry for my post in the others thread, I didnt know how to open a new thread)

If you need to send them back, there will be shipping label under the one that shipped them to your house. Peel off the top label.
You would use the same carrier.
Everything is already paid for so don't fill out new forms and don't pay anything.
You can go here -> https://support.apple.com/repairstatus/Main
and check on the status. It should show Awaiting customer return (or something similar) if they want them back.
If in doubt, call 1-800-myapple.

How to send data back to publishing stream

Hi,
Environment: ActionScript3.0, FMS, Flash Project created in Flash Develop
How to send data back to publishing stream? I need to send data back to publishing stream.
Using NetStream.send() we can send data to subscribers but is it possible to send data from subscriber back to publisher using any NetStream method.
One other solution to this is remoteSharedObject, but if it is possible with NetStream class then let me know.
Thanks

There are a number of ways to extract data from CRM On Demand including:
* Export - manual process, generate CSV file containing CRM On Demand data
* List/Analytics - manual process, export the contents of a report of list to a CSV
* Web Services - programmatic, develop an application that queries for data within CRMOD
* Integration Events - programmatic, use workflow to trigger event creation and then poll for events to know when an operation occurs on a record (i.e. Insert of new Account record)
As for getting that data into another system, that will depend on the system and the methods available for inserting data that it makes available.
Hope this helps.
Thanks,
Sean

How do I make a still frame in iMovie and send it to iPhoto?

How do I take a still frame from a movie clip in iMovie and send it to iPhoto?
The goal is when I export my movie to iDVD, I want to use still clips from my movie as the rotating images. Right now it either plays through the DVD in the rotating part or I can drag pictures from iPhoto into the slots.
Thanks!

Have a look at this thread:
http://discussions.apple.com/thread.jspa?threadID=1956321&tstart=0
Ask your question in iMovie Help.
It is an invaluable resource.
Also ask in "Search Discussions" here.
Regards, Z.

HT1048 I ordered a book prom iphoto, and it was support to cost 610 NOK. but apple withdrew the amount 3 times from my acconu. how do I get the 1220 NOK back. who do I talk to or send e-mails to? I can't find any information. thanks!

I ordered a book prom iphoto, and it was support to cost 610 NOK. but apple withdrew the amount 3 times from my acconu. how do I get the 1220 NOK back. who do I talk to or send e-mails to? I can't find any information. thanks!

Greetings,
Contact the Apple Online Store in your region (which I believe is Norway): http://store.apple.com/no/help/contact
or
http://support.apple.com/kb/HE57
Cheers.

How to send the email alert to some users (defined users hasn't post document to a library within a specified time frame)

Hi,
Native alert on a document library can setup to email to the predefined user when any changes on the document.
However, I would like to setup a document library and alert me when
[email protected] [email protected]
[email protected] hasn't yet put a document to the library by 2014-07-01 (e.g today is 2014-06-26). The reminder email will send to
[email protected] [email protected] on 2 days before the dead line (ie. 2014-06-29) because
[email protected] and [email protected] hasn't put their file to the library on or after 2014-06-29..
Thanks

Hi,
http://stackoverflow.com/questions/17571562/creating-email-alert-workflow-for-sharepoint-file-libraries
http://stackoverflow.com/questions/18868479/how-to-send-automatic-email-notification-to-user-two-days-before-expiry-date
http://social.msdn.microsoft.com/Forums/en-US/acb12dd2-d6a5-4b7e-b233-037558bfa2e5/start-workflow-x-days-before-expiry-date?forum=sharepointcustomizationlegacy
Please remember to click 'Mark as Answer' on the answer if it helps you

How to send command to the control board?

Hello everyone
I am developing pci-7344`s driver under RTX.It says in the DDK that
command and data passed to or from the controller is handled in a
packet format. A packet consists of resourceID,commandID,data etc.Now I
know the information of resourceID,commandID,data etc.DDK or the
hardware user manual does not mention how to send them in a packet.
Moreover The command buffer register is 16-bit.
I try to send them one by one but it indicates "modal error" in the
csr.Since I have not programmed "error-handling" part of the driver ,so
I do not know what the error codes are.
Hope some advice on how to send the command packet? It is best if there
is an example !!
Thank you!!!

Sandy,
Here is a modified version of the example I suggested. It includes the option of using the parallel port for communication. I am in the process of getting some example ZPL for you for the label formats that you are using.This example should give you everything you need to communicate with the printer.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot
Attachments:
Basic Serial Write and Read (8.6).vi ‏24 KB

How to send XML using UTL_HTTP

I am trying to workout how to send XML data to a webserver using UTL_HTTP but am not getting any reply
I need to submit the following XML document to a server "http://api.fastsms.co.uk/api/xmlapi.php" Their instructions are "The XML Document should be posted unencoded, with a UTF-8 character set as parameter 'xml'"
If I submit the following XML on their test form
<?xml version="1.0"?>
<apirequest version="1">
<user>
<username>**USER**</username>
<password>**PASSWORD**</password>
</user>
<application>
<name>Example Application</name>
<version>1.0</version>
</application>
<inboundcheck lastid="10711399"/>
</apirequest>
I get an XML response back with the messages in my inbox.
This is the code I am trying to use to accomplish the same from PL/SQL : I know a response is coming back as there is header information - just no content. What am I doing wrong ?
l_xml VARCHAR2(5000);
req utl_http.req;
resp utl_http.resp;
header_name VARCHAR2(256); -- Response header name
header_value VARCHAR2(1024); -- Response header value
response_text VARCHAR2(4000); -- Response body
l_url VARCHAR2(100);
BEGIN
l_xml := 'xml=<?xml version="1.0"?>';
l_xml := '<apirequest version="1">';
l_xml := '<user>';
l_xml := '<username>**USER**</username>';
l_xml := '<password>**PASSWORD**</password>';
l_xml := '</user>';
l_xml := '<application>';
l_xml := '<name>Example Application</name>';
l_xml := '<version>1.0</version>';
l_xml := '</application>';
l_xml := '<inboundcheck lastid="10711399"/>';
l_xml := '</apirequest>';
-- Open HTTP connection
l_url := 'http://api.fastsms.co.uk/api/xmlapi.php';
req := utl_http.begin_request(l_url,'POST',utl_http.HTTP_VERSION_1_1);
-- Set headers for type and length
utl_http.set_header(req,'Content-Type','application/x-www-form-urlencoded');
utl_http.set_header(req,'Content-Length',to_char(length(l_xml)));
-- Write parameter
utl_http.write_text(req,l_xml);
-- Read response file
resp := utl_http.get_response(req);
-- Print out the response headers
FOR i IN 1 .. utl_http.get_header_count(resp) LOOP
    utl_http.get_header(resp,i,header_name,header_value);
    logging_pkg.info(header_name || ': ' || header_value);
END LOOP;
-- Print out the response body
BEGIN
    LOOP
      utl_http.read_text(resp,response_text);
      logging_pkg.info(response_text);
    END LOOP;
EXCEPTION
    WHEN utl_http.end_of_body THEN
      logging_pkg.info('End of body');
END;
-- close http connection
utl_http.end_response(resp);
EXCEPTION
    WHEN utl_http.end_of_body THEN
      utl_http.end_response(resp);
END;
Cheers,
Brent

Hi Billy
Yikes - how embarassing ! Thanks for pointing out my beginners mistake there. I've fixed my code - and also implemented the substitutions of parameters like you suggested - I like that approach.
Unfortunately the end result is no better - the line
utl_http.read_text(resp,response_text);
Still returns nothing back
The headers that are coming back are
Date: Thu, 04 Jul 2013 08:31:56 GMT
Server: Apache/2.2.16 (Ubuntu)
X-Powered-By: PHP/5.3.3-1ubuntu9.3
Expires: Thu, 19 Nov 1981 08:52:00 GMT
Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0
Pragma: no-cache
Vary: Accept-Encoding
Content-Length: 0
Content-Type: text/html; charset=UTF-8
Connection: close
I guess I will need to try chasing it with the fastsms vendor so see if they can check my incoming request and see if there are any glaring problems. I know the xml is correct as I am now logging the xml string just before I send it and when I take that string and put it in their test form it works perfectly - something else in the puzzle is missing. I've had no experience using utl_http before - perhaps it's no possible to read the xml repsonse using this ?
Anyway, thanks for your help Billy.
ps - How do you paste your code into your message to get that formatting ?
Cheers,
Brent

Firefox 6 forces you to log into e-mail again & again, since you can't view an e-mail & simply close that tab.. I want to close the tab, not exit the function I am in. How do I uninstall Firefox 6 & go back to the previous version?

With Firefox 6, you can't close the tab you are in and remain in the program; opting to close one e-mail means you are forced to exit the (e-mail) program completely and then go back into it...this is ridiculous if you are trying to read all your e-mails...not have this issue. How do I uninstall Firefox 6 & go back to the previous version?

I am unwilling to attempt navigation away from these sites. The pop-ups that occur on the attempt to leave a site or to close the browser are exit traps offering incentive to stay.
Once upon a time, when the internet was less dangerous, I would be willing to close the exit pop-ups. Now, after twice being infected with malware trying to close the pop-ups, I now force close whichever browser I am using.
Recently, I clicked on the red X to close one pop-up, and it installed a trojan that I had to pay to be removed. When I clicked on 'Leave' in another exit pop, it didn't exit and it turned out I was giving permission to run a script file. Now that criminals have learned these exit pop-ups can be used to force a click action, the sites using them have become dangerous.
If I force the browser to close using Task manager, Please tell me how to stop FireFox from sending me directly back to the same site because it mistakenly believes it crashed when it did not. I forced it to close because I was on a site that had taken control of my browser and was not allowing me to leave the site.
No other browser sends me back to the potentially dangerous sites. I prefer Firefox, but the new version must have a setting that allows me to get safely away from a problem site?

How to send joystick data over TCP connection

Hi all,
I am a long time Labview discussion forum user for learning, but this is my first time posting a question, I hope somebody can help me!
In the attached VI I am trying to send data from a joystick over a TCP connection. I can send data fine using the TCP examples (in fact the majority of my VI is just a copy of the example). However I am to the point where I do not know how to send all the data necessary (3 axis data, 12 buttons, and the POV data) over TCP. Strings, clusters, and arrays were never my strong suite and converting between them is a nightmare for me.
Basically I am trying to send each axis data (X,Y, and Z), button data (12 buttons), and POV data (the POV data will be calculated to adjust the position of a camera, so the immediate data is not important, I will add functions to add the change in the button movements to write a standing position for two servos [pan and tilt], for which that I will need to send over the TCP connection) over the TCP connection to control various cameras and motors. I don't know if it is posible to send that much data over a TCP connection in one write VI through a string, and also how to separate the string on the other side in order to control the client VI.
Again, the actual TCP communication I get, and can operate fine, just formatting all the data into a string (or whatever is required) so that I can unpack on the other side is the issue here.
Another question I have (not impotant to get the program running just might make it easier on me) is can a TCP server (which sends the data to the client) also recieve data back from the client on the same port ( for example sensor data and digital positions [on,off])? Or do I need to set up two TCP communication loops with the first client acting as the server on a different port than the first, which then sends the data to the original server, which also has a client TCP configuration in another loop? I hope this makes sense...
One final question.....I already have a solution to this but using labview for the entirety of this project would be nice. I use skype to stream 1080p video from a webcam to my computer so I can view live feed. Can labview do this? This would be awesome if so, I am just not sure if the communication protocols in use could support real time (or as close as possible to streaming) for 1080p video.
Thanks all in advance for your help,
Physicsnole
Attachments:
cameraserver.vi ‏24 KB
cameraclient.vi ‏18 KB

Physicsnole wrote:
In the attached VI I am trying to send data from a joystick over a TCP connection. I can send data fine using the TCP examples (in fact the majority of my VI is just a copy of the example). However I am to the point where I do not know how to send all the data necessary (3 axis data, 12 buttons, and the POV data) over TCP. Strings, clusters, and arrays were never my strong suite and converting between them is a nightmare for me.
Well, you cast the axis info cluster to a string, but then you cast it back to an array of DBL. Thatr's not compatible. You should probably cast it back to an "axis info" cluster of exactly the same type. Go the the other VI and right-click the cluster wire to create a constant. Now move that diagram cluster constant to the other VI and use it as type.
Your default ports don't seem to match. You seem to have client and server roles confused. In the sever you create a listener, but then you start sending packets, even though no connection is established. The connection needs to be initiated by the client.
Your client stops the loop the first time a timeout is encountered. Shouldn't that be more permanent? Also, please retain code clarity and avoid unecessary complexities. For example, replace the "not or" with a plain "or" and change the loop to "stop if true"
Physicsnole wrote:
Basically I am trying to send each axis data (X,Y, and Z), button data (12 buttons), and POV data (the POV data will be calculated to adjust the position of a camera, so the immediate data is not important, I will add functions to add the change in the button movements to write a standing position for two servos [pan and tilt], for which that I will need to send over the TCP connection) over the TCP connection to control various cameras and motors. I don't know if it is posible to send that much data over a TCP connection in one write VI through a string, and also how to separate the string on the other side in order to control the client VI.
You can send as much as you want. The casting to/from string is the same as described above.
Physicsnole wrote:
Another question I have (not impotant to get the program running just might make it easier on me) is can a TCP server (which sends the data to the client) also recieve data back from the client on the same port ( for example sensor data and digital positions [on,off])? Or do I need to set up two TCP communication loops with the first client acting as the server on a different port than the first, which then sends the data to the original server, which also has a client TCP configuration in another loop? I hope this makes sense..
The primary function of a "server" is to wait for a connection and then communicate with the client once a conenction is established. An established TCP/IP connection is fully two-way and both sides can send and receive.
LabVIEW Champion . Do more with less code and in less time .

How to send a unique hardware identifier

How to send a unique hardware identifier

Please take each of the following steps that you haven't already tried until the problem is resolved.
Step 1
Follow the directions in this support article.
Step 2
Associate your Apple ID with your user account. Then sign in to the App Store with the same ID.
Step 3
Triple-click anywhere in the line below on this page to select it:
/Library/Caches/com.apple.appstore/adoption.plist
Right-click or control-click the line and select
Services ▹ Reveal
from the contextual menu.* A folder may open with a file named "adoption.plist" selected. If it does, move the file to the Trash. You may be prompted for your administrator password. Log out, log back in, and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 4
Contact Mac App Store Customer Service.

How to send a Control or frame Back(send to back)

Similar Messages

Maybe you are looking for