How to Send WSU:TimeStamp dynamically in BPEL 11g

I have requirement to send <wsu:Timestamp> dynamically like creation and expiration must be having 5 min difference.
<wsu:Timestamp>
<wsu:Created>*2012-06-08T09:18:14Z*</wsu:Created>
<wsu:Expires>*2012-06-08T09:23:14Z*</wsu:Expires>
</wsu:Timestamp>
how to send 5 minutes difference in WSS policies.

Hi,
I have created a task flow which will contain all merchant details, and i try to drag this task flow as html form with post request, then i am getting error like nested forms in that page. can any one help how can achive this.
my requirement is: when user click on submit button then i need to invoke http post request which needs to embedded username and pwd with my form data. it's very urgent pls respond if any one knows.

Similar Messages

How to send workitem to dynamic agents

Hi all,
This is my problem, I have to send workitem to dynamic agents (number of agents vary).
I have the approver details in the workflow container, now i have to send the workitem to the apporvers, since the number of approver varies i am using while loop and i am doing container opreration for each loop. I have the apporvers details in a multiline container based upon this i have to send workitem to the first approver and after his decision i have send workitem to second approver and it goes on.
Regards
Balaji E.

Hi all,
After struggling for 2 day i found the solution for my problem.
My Problem:
I get the approver details from a function module and i call this function module in a method and through a task i pass the multiline container element (which is holding approvers details) to my workflow container. My problem is i dont know how to loop this multiline container element in my loop (while).
Solution:
There is a macro to copy one container element to another container element it may a multiline container too.
SWC_COPY_ELEMENT <SourceContainer> <SourceElement> <TargetContainer> <TargetElement>.
i used this macro while i run the method at first time and i copy this value to another container (multiline) element at this step itself.
In my next step i pass only the loop number (i have a workflow container element. and i increment this container element for each loop) to the method and in that method i read the multiline container element based on this loop number and i pass the result value to task-->workflow.
From here i proceed further.
Thanks all of you.
SDN Forum helped me a lot in this issue.
Regards,
Balaji E.

How to send html email notification in bpel

hi gurus,
i want to send html email notification from bpel.
before, i already successful send html email with attachment, but when i send an email without attachment, then the body message will turn into a plain text.
as i check from the email accepted, email with attachment will have a mime type "text/html" but if no attachment then it will be "text/plain"
from the bpel configuration, by default the mime type already set to "text/html; charset=UTF-8", below is the sample configuration in my bpel process
[quote]
<copy>
                                <from>string('text/html; charset=UTF-8')</from>
                                <to variable="varNotificationReq"
                                    part="EmailPayload">
                                    <query>ns10:Content/ns10:MimeType</query>
                                </to>
                            </copy>
[/quote]
i think this suppose to be a easy configuration, but i'm not sure whether i miss something in configuration the email process or this is a bugs in bpel.
environment:
linux
jdev 11.1.1.6
do u guys ever facing a same problem or have a solution to this ? please throw some light.
thanks
===
update, i found a temporary solutions.
so i add a attachment from the process design, and then i change it from the source.
[quote]
<copy>
                                <from>
                                    <literal>
                                        <Content xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">
                                            <MimeType xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">multipart/alternative</MimeType>
                                            <ContentBody xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">
                                                <MultiPart xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">
                                                    <BodyPart xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">
                                                        <MimeType xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"/>
                                                        <ContentBody xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"/>
                                                        <BodyPartName xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"/>
                                                    </BodyPart>
                                                </MultiPart>
                                            </ContentBody>
                                        </Content>
                                    </literal>
                                </from>
                                <to variable="varNotificationReq"
                                    part="EmailPayload">
                                    <query>ns10:Content</query>
                                </to>
                            </copy>
<copy>
                                <from>string('text/html; charset=UTF-8')</from>
                                <to variable="varNotificationReq"
                                    part="EmailPayload">
                                    <query>ns10:Content/ns10:ContentBody/ns10:MultiPart/ns10:BodyPart[1]/ns10:MimeType</query>
                                </to>
                            </copy>
                            <copy>
                                <from>string('your message')</from>
                                <to variable="varNotificationReq"
                                    part="EmailPayload">
                                    <query>ns10:Content/ns10:ContentBody/ns10:MultiPart/ns10:BodyPart[1]/ns10:ContentBody</query>
                                </to>
                            </copy>
[/quote]
make sure you put the mime type multipart/alternative into the email payload content. by default, when you add attachment, it will generate mime type multipart mixed automatically.
if you don't change it to multipart/alternative, your email will show a attachment, but actually your email doesn't contain any attachment.
and then for the message and mimetype make sure you have that ns10:bodypart, because this email already been set as a multipart email.
when you add attachment, by default it will generate 2 body part, first one is for the body message and the second one is for the attachment. since i only want to use the body message only, then i have to erase the second bodypart
with this workaround, i can send a html email without attachment perfectly.
but i have to take note, when i updating the email process from process design, then the source will be generated again automatically, and the edited one will be replaced.
thanks.

Make sure you upload all of the images used in your email to a server you control. Then, change your image paths to point to those uploaded images with absolute links.
You will get marked as spam if you attempt to send images as attachments to a large list of recipients and most email clients won't download images to begin with, so make sure your html email makes sense with broken pictures.
CSS support is spotty across email clients, if you use css, make sure it's inline, not embedded in the <head> or externally linked in the <head>. Some email clients strip out the <head> section entirely.
Basically, you need to design your html email as if you haven't moved out of the 90's yet, as far as web design is concerned, in order to get maximum cross client compatibility.
Then, when you're ready, I would suggest using a service like www.icontact.com or www.constantcontact.com if your subscriber list is anywhere over 100 or so recipients.

How to send mails to dynamic receivers using XSLT mapping

Hi All,
I have a problem with the mail attributes in xslt mapping. I have a condition on a source field, based on which the "TO" attribute should vary.
For Example : If ROOT/HEADER/XYZ = 001 then receiver should be some abc email id
If ROOT/HEADER/XYZ = 002 then receiver should be
pqr email id.
Can anyone help me out of this
Thanks in advance.
Regards,
Lakshmi.

Hi Lakshmi,
you have to create an appropriate mapping for this. As said, the mentioned mail package format will be your message. The message will be analyzed by the mail adapter and after this the TO field will be filled with the correct value you will use. The structure inserted into the content fields will be send in the mail body or, if set in the configuration, as an attachement of the mail (as far as i know (-; )
Example:
Original structure:
<ContentStructure>
<ValueA>ID1</ValueA>
<ValueB>XYZ</ValueB>
</ContentStructure>
Extract of an XSLT-Mapping (as an example, you can use the mapping type you prefer):
<ns:Mail xmlns:ns="http://sap.com/xi/XI/Mail/30">
<Subject>Subject</Subject>
<From>namea(at)company.com</From>
<To>
    <xsl:choose>
      <xsl:when test="ContentStructure/ValueA='ID1'">
        nameb(at)companyb.com
      </xsl:when>
      <xsl:when test="ContentStructure/ValueA='ID2'">
        namec(at)companyc.com
      </xsl:when>
    </xsl:choose>
</To>
<Reply_To />
<Content_Type>text/plain</Content_Type>
<Content>
    This is the content.
</Content>
</ns:Mail>
If you try something like this, you will be able to set the TO email address dynamical.
Rregards,
Lars

How to call the WS in BPEL 11g

Hi,
I have a WS externally provided, which need the following soap header...
<soap:Header><fmw-context xmlns="http://xmlns.oracle.com/fmw/context/1.0"/><wsse:Security soap:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:UsernameToken>
<wsse:Username>MASKED</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">MASKED</wsse:Password>
</wsse:UsernameToken>
</wsse:Security></soap:Header>
Please let me know how do i call the WS in BPEL 11g.
Please let me know the entire solution, kind of urgent...
Thanks,
Rosh

Hi All,
got the solution.
Its working...
http://soa-howto.blogspot.com/2008/09/how-to-set-security-credentials.html
Thanks,
Rosh

How to Send Notification to Manager of the Employee using Dynamic Action..

Hi All,
I am sending a notification using the Dynamic Action for an Infotype.. I am able to send mail using distribution list but I have a requirement to send the notification to employee manager. I am able to determine the Line Manager ID calling the subroutine in the dynamic action. But I am not sure how to send the notification to the manager.
If the email's are maintained in distribution list if I specify the text id in the feature M0001 and distribution list the notifications are sent. I am not sure how to pass the line manager id to get the same notification..
I have seen the option REC1 but infotype 0001 in not having the line manager id..

Used the Function Module RH_GET_LEADING_POSITION.
Thanks..

How to send an entire HTML, PHP dynamic page using phpmail()?

How to send an entire HTML, PHP dynamic page using phpmail()
from PHP website, similar to mail this page or send to a friend
link?

Hello,
Please change the mail address
"info[at]furkids[dot]co[dot]za" from this thread ^^^look above^^^
to "[email protected]"
Thank you

How to send pdf attachment through BPEL

Hi All,
I have been looking for a solution to send a pdf as an attachment in bpel. My requirement is,
- Send a SOAP request to 'SendAttachment' bpel service with all the input parameters
- SendAttachment bpel service validates the input and generates the pdf within the bpel process
- SendAttachment bpel has to return the generated pdf as attachment along with response payload.
I did some research but couldn't a relevant scenario. I have no idea about how to start with. Experts, please suggest on how to implement this scenario.
Thanks in advance,
Satya.

Dear Ravi,
I tried to build a small application to handle the above mentioned scenario. But I am unable to send pdf as attachment in BPEL. Below are the details,
1) Created a standalone weblogic webservice(instead of ejb as you mentioned) - 'GetAttachmentService' in eclipse that will create a pdf and send it along with the xml response.
2) In GetAttachmentService, created pdf is converted into byte[] and mapped to a 'base64Binary' element in 'GetAttachmentResponse'.
3) Tested the above webservice successfully using SOAP UI. I am able to see the binary data as one of the elements in GetAttachmentResponse.
4) Now, I have created a composite in SOA suite that will have a webservice adapter(to consume GetAttachmentService) and a BPEL process - 'SendAttachmentBPEL' to read the response elements.
5) SendAttachmentBPEL response has a 'base64Binary' element to hold the binary data from GetAttachmentService response.
6) Modified the SendAttachmentBPEL wsdl to accomodate mime content as below.
7) Since there is mime part in wsdl, EM didn't allow me to test there. So I have used SOAP UI to test SendAttachmentBPEL, I am getting the pdf as binary data in one of the response elements rather as attachment. Please take a look at the below BPEL snippet and suggest if any changes are required.
My objective is when I hit the SendAttachmentBPEL in SOAP UI, I should get back a response along with pdf attachment.
--BPEL snippet
     
     <wsdl:message name="SendAttachment1BPELRequestMessage">
          <wsdl:part name="payload" element="client:process"/>
     </wsdl:message>
     <wsdl:message name="SendAttachment1BPELResponseMessage">
          <wsdl:part name="payload" element="client:processResponse"/>
<wsdl:part name="bin" element="client:processAttachment"/>
     </wsdl:message>
     
     
     <wsdl:portType name="SendAttachment1BPEL">
          <wsdl:operation name="process">
               <wsdl:input message="client:SendAttachment1BPELRequestMessage" />
               <wsdl:output message="client:SendAttachment1BPELResponseMessage"/>
          </wsdl:operation>
     </wsdl:portType>
     
     <plnk:partnerLinkType name="SendAttachment1BPEL">
          <plnk:role name="SendAttachment1BPELProvider" portType="client:SendAttachment1BPEL"/>
     </plnk:partnerLinkType>
<wsdl:binding name="SendAttachment1BPELBinding" type="client:SendAttachment1BPEL">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="process">
<soap:operation style="document"
soapAction="http://xmlns.oracle.com/bpel_104_Arrays/SendAttachmentProject/SendAttachment1BPEL/process"/>
<wsdl:input>
<soap:body use="literal" parts="payload"/>
</wsdl:input>
<wsdl:output>
<mime:multipartRelated>
<mime:part>
<soap:body use="literal" parts="payload"/>
</mime:part>
<mime:part>
<mime:content part="bin" type="application/pdf"/>
</mime:part>
</mime:multipartRelated>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>

How to send 5th variable to maessage dynamically

how to send 5th variable to maessage dynamically..
we have only 4 like msgv1,msgv2,msgv3,msgv4.......
how to send 5th variable
thanks in advssssss

hi,
as per my knowledge it is not possible because Message texts in table T100 can contain up to four ampersand characters (&) as placeholders. You can replace these at runtime using the WITH addition in the MESSAGE statement:
MESSAGE ... WITH f1 ... f4.
The contents of fields f1 ... f4 are then inserted sequentially into the message text in place of the placeholders.
for more information on messages follow this link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbaaaf35c111d1829f0000e829fbfe/content.htm
regards,
Ashok reddy

How to send Dynamic Interactive Forms through mail?

Hi all,
I'm trying to sent Interactive Forms as attachment through mails.
Everything works fine as long as the Content of this Interactive Form stays static.
When I add dynamic elements and test this in SFP, they work.
However when they get sent by mail, the dynamic content is lost and gets back Static.
Does anyone has ABAP code or any other solutions so that the PDF gets send as an Dynamic Form?
Thanks in advance.
Kind Regards,
Maarten

Hi,
I'm working from the Web UI. This is BSP. Here I add 2 Methods (GET_PDF and SEND_MAIL).
The GET_PDF gets all data for the form and then sends the FORMOUTPUT to the SEND_MAIL method.
Here I add the PDF as following:
First I convert it to BINARY and then I add it as attachment.
Do I need to add it as another TYPE or ....
+ CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
      BUFFER                = ip_formoutput-PDF "PDF file from function module
    APPEND_TO_TABLE       = ' '
IMPORTING
    OUTPUT_LENGTH         =
    TABLES
      BINARY_TAB            = lt_att_content_hex
lo_document->add_attachment(
    EXPORTING
      i_attachment_type    = 'PDF'
      i_attachment_subject = 'Your appointment Details'
      i_att_content_hex    = lt_att_content_hex ).+
Kind Regards,
Maarten

How to send only one (of several) attachment from a receiver email adapter?

Hi all,
I have been working with the SAP XI email adapter for some time and now I encountered the following challenge:
I am receiving a message via email from a partner, call some modules which lead to the generation of 5 attachments in total for the incoming message.
I then map the MainDocument to a CONTRL message and return it to the sender using the dynamic parameters of both the sender and the receiver email cc.
I am filling these parameters inside the message mapping; so far I am not using the mailpackage xsd (the only things out of the ordinary are checked boxes for "use adapter specific parameters", "variable transport" and "keep attachments").
My problem is that the email receiver cc now generates an email with 5 attachments when I need it to add only the CONTRL (aka MainDocument) as attachment to this email.
Do you know if there is a way to tell the receiver cc to only use one attachment (or to remove attachments from the original message, f.ex. inside the message mapping)?
Thanks and cheers!
Stefan

Hi Stefan,
>>>>Do you know if there is a way to tell the receiver cc to only use one attachment (or to remove attachments from the original message, f.ex. inside the message mapping)?
1. It cannot be done in a mapping
2. have a look at mz blog
how simple it is to write an adapter that will do what you need
(just check the delete part of this blog):
/people/michal.krawczyk2/blog/2006/02/23/xi-dynamic-name-in-the-mail-attachment--pseudo-variable-substitution
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

How to send file to FTP on conditional basis.

Hi SAP Guru's,
Can somebody please tell me how to create a file on conditional basis in FTP.
My requirement is that I have to create a file in different directory according to the sender port field.
Interface
IDOC -
> XI -
> File
SNDPRN(DGE008,DGE006,..............) now I need to create the file according to the SNDPRN field.
Example
SNDPRN (DGE006)----
> Target (DGE006/xyz/abc/filename.xml)
SNDPRN (DGE008)----
> Target(DGE008/xyz/abc/filename.xml)
Also how do I send the data to the specific directory because I only get the SNDPRN(DGE008) from the idoc but how to send the data to /xyz/abc/ directory.
I have tried dynamic configuration but it is not working.
DynamicConfiguration conf = (DynamicConfiguration)
container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","Directory");
String MyDirName=DirName;
String ourSourceFileName = conf.put(key,MyDirName);
return "";
Error in Adapter Monitoring
Could not process due to error: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: The Adapter Message Property 'Directory' was configured as mandatory element, but was not supplied in the XI Message header
CAN SOMEBODY PLEASE HELP ME.
Edited by: Muhammad iqbal on Jul 12, 2010 3:04 PM

Off course I did.
I have done the following in Int Rep.
Step 1,
Create an udf for dynamic configuration and mapped it with the MT
DynamicConfiguration conf = (DynamicConfiguration)
container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","Directory");
String MyDirName=DirName;
conf.put(key,MyDirName);
return "";
Steps in Int Dir
Target Directory: /
File Name: filename.xml
Use Adapter Specific Message Attribute = checked
Fail if Adapter Specific Message Attribute missing = checked
Directory = checked
Error in Adapter Monitoring
Could not process due to error: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: The Adapter Message Property 'Directory' was configured as mandatory element, but was not supplied in the XI Message header
CAN SOMEBODY HELP ME IN THIS MATTER.

How to send only part of a sequence to Encore?

Hi
I'm new to CS5.5 and I've been trying to figure out how to send only part of a sequence to Encore from PPro. I see in the Help file that it says this can be done but it doesn't explain how to do this (or I haven't been able to find where it's explained). When I use "send to Encore" with dynamic link it sends the whole sequence even though I've tried marking in/out or marking the section I want with the work area bar. Is it not possible to do this using dynamic link?
Thanks!
Steve

Playing around with this a bit I found another method in addition to the one you described. I found I can mark part of the sequence with the work area bar and then use Export. The Export screen has an option to send the entire sequence or only the part under the work bar. Then I imported it into Encore and since it was exported with final disc settings Encore didn't have to encode it.
But I think I will send in a feature request. Hopefully a lot of other people will also ask for this.
Thanks
Steve

How to send multiple attachment s with a mail??

Hi,
How to send multiple attachments with a mail??
Situation::
In my case i have 5 internal tables populated dynamically in the report.
I want to send them in .TXT format as attachment with 1 mail.
Can anybody tell me in 'SO_NEW_DOCUMENT_ATT_SEND_API1',
how we add multiple attachmants to table objin???
thanks,
deepak

Hi Deepak,
Please find the sample code for sending mail with multiple attachment.
Report ZPAN_02M                                        *
REPORT zpan_02m                                .
*-MAIN DECLARATION----
DATA: docdata    LIKE sodocchgi1,
      objpack    LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
      objhead    LIKE solisti1   OCCURS 1 WITH HEADER LINE,
      objtxt     LIKE solisti1   OCCURS 10 WITH HEADER LINE,
      objbin     LIKE solisti1   OCCURS 10 WITH HEADER LINE,
      objhex     LIKE solix      OCCURS 10 WITH HEADER LINE,
      reclist    LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
*-OTHER DECLARATIONS----
DATA : listobject   LIKE abaplist OCCURS 1 WITH HEADER LINE.
DATA : tab_lines(3) TYPE n.
DATA : att_type     LIKE soodk-objtp.
*OBJBIN = ' | '. APPEND OBJBIN.
*---For simple attachment -
DATA : BEGIN OF wi_data OCCURS 0,
         c1(10),
         c2(10),
       END OF wi_data.
wi_data-c1 = 'Line 1'.   wi_data-c2 = 'Line 1'. APPEND wi_data.
wi_data-c1 = 'Line 2'.   wi_data-c2 = 'Line 2'. APPEND wi_data.
wi_data-c1 = 'Line 3'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 4'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 5'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 6'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 7'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 8'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 9'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 10'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 11'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 12'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 13'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 14'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 15'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 16'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 17'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 18'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 19'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 20'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 21'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 22'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 23'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 24'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 25'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 26'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
class cl_abap_char_utilities definition load.
constants:
    con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
    con_cret type c value cl_abap_char_utilities=>CR_LF,
    con_nwln type c value cl_abap_char_utilities=>NEWLINE.
LOOP AT wi_data.
CONCATENATE wi_data-c1 con_tab
              wi_data-c2
            INTO objbin.
condense objbin.
CONCATENATE con_cret objbin INTO objbin.
APPEND objbin.
ENDLOOP.
*---CREATE MESSAGE : DOCDATA -
Name
docdata-obj_name = 'TEST_ALI'.
Subject
docdata-obj_descr = 'Test including ALI/HTML Attachment'.
*---CREATE MESSAGE : BODY -
objtxt = 'Test Document.'.
APPEND objtxt.
objtxt = 'You will find an ALI/HTML attachment in this message.'.
APPEND objtxt.
objtxt = 'Have a nice day.'.
APPEND objtxt.
*-CREATE PACKING LIST-----TEXT--
objpack-head_start = 1.
DESCRIBE TABLE objtxt LINES tab_lines.
READ     TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num   = 0.
objpack-body_start = 1.
objpack-body_num   = tab_lines.
objpack-doc_type   = 'RAW'.
APPEND objpack.
*-CREATE PACKING LIST-----ATTACHMENT--
att_type = 'XLS'.
DESCRIBE TABLE objbin LINES tab_lines.
READ     TABLE objbin INDEX tab_lines.
objpack-doc_size = ( ( tab_lines / 2 ) - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num   = 0.
objpack-body_start = 1.
objpack-body_num   = tab_lines / 2.
objpack-doc_type   = att_type.
objpack-obj_name   = 'ATTACHMENT 1'.
objpack-obj_descr = 'Attached Document 1'.
APPEND objpack.
att_type = 'XLS'.
objpack-doc_size = ( ( tab_lines / 2 ) - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 14.
objpack-head_num   = 14.
objpack-body_start = 14.
objpack-body_num   = tab_lines / 2.
objpack-doc_type   = att_type.
objpack-obj_name   = 'ATTACHMENT 2'.
objpack-obj_descr = 'Attached Document 2'.
APPEND objpack.
*-CREATE RECEIVER LIST----
reclist-receiver = '[email protected]'. reclist-rec_type = 'U'.
APPEND reclist.
reclist-receiver = sy-uname.               reclist-rec_type = 'B'.
APPEND reclist.
*-SEND MESSAGE----
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
    document_data                     = docdata
    put_in_outbox                     = 'X'
    commit_work                       = 'X'
IMPORTING
SENT_TO_ALL                       =
NEW_OBJECT_ID                     =
TABLES
    packing_list                      = objpack
    object_header                     = objhead
    contents_bin                      = objbin
    contents_txt                      = objtxt
CONTENTS_HEX                      = objhex
OBJECT_PARA                       =
OBJECT_PARB                       =
    receivers                         = reclist
   EXCEPTIONS
     too_many_receivers               = 1
     document_not_sent                = 2
     document_type_not_exist          = 3
     operation_no_authorization       = 4
     parameter_error                  = 5
     x_error                          = 6
     enqueue_error                    = 7
     OTHERS                           = 8.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
              WITH output = 'X'
              AND RETURN.
Hope this is enough for you...
Enjoy SAP.
Pankaj Singh.

How to Send a mail whenever employee is Hired

Dear Experts,
How to send a mail to concern mangaer whenever a nes PERNR ( Employee ) is hired?
Regards,
sudher

Hi,
I was just going to suggest use dynamic actions.
Alternatievely you can abuse a custom function module on SWEHR3 instead of determining which event to send it could also just send an email.
Kind regards, Rob Dielemans

How to Send WSU:TimeStamp dynamically in BPEL 11g

Similar Messages

Maybe you are looking for