How to set a keyframe with setValueAtTime for only one axis?

Hi,
I´d like to set a keyframe for the layer´s scale, anchor point values but separately. Let´s say I want to add the following keyframes to a layer:
time: 0, value: 100, axis: X
time: 0.3, value: 10, axis: Y
time: 1, value: 110, axis: X
If I use setValueAtTime(time ,[x, y]) it always places a keyframe for both axis.
How can I set a keyframe with setValueAtTime for only one axis?
Regards,
Thomas

Dan, thanks for your fast reply. But the problem is a bit difficult to describe for a german like me
I´m try to convert given keyframes from another application. Let me visually show how it handles keyframes that are set on different axis at different times:
X: O---O---O
Y: ---O--O-O
You see when the user sets a keyframe and both axis were modified, both have a keyframe (see the last key). But if only one axis is transformed and the other not, there is only one keyframe. The problem that I try to solve is that AE is only able to set a keyframe for both axis at a given time. So if I set the 3 keyframes of the X axis first, the AE script will set keys on the Y axis simultaneously. That´s bad because it adds keyframe to the other axis where there is no value "cache". So if I would set all keyframes it would look like this:
X: O--•O-•-O
Y: •--O•-O-O
The small dots indicate those "forced" in-between keys.
So is there a "native" scripting way to separate the dimensions (like the position prop) for other props and add independent keyframes?

Similar Messages

[iPhone] Enable paging for only one axis?

Hi! Basically what I am looking to do is exactly like the AIM application where I want to have a paging effect horizontally, but I want to scroll vertically.
Unfortunately, the best I can come up with is a scrollview inside another scrollview. This doesn't seem to work as the inner scrollview (that controls vertical scrolling) doesn't pick up any touches when it's inside the paging scrollview.
I was wondering whether it really is two scrollviews or whether I can enable paging for only one axis.
How would I go about programming this?
Thanks!

{quote}You need to have only one scrollview that handles the vertical scrolling. Then add code to the touchesBegan:withEvent: method to detect a horizontal swipe. When you detect one, programmatically animate the page change.{quote}
I had the same question as this topic and this answer was what I ended up doing.

Lion iCal: How to view many calendars, but reminders for only one

I'm in an all MAC office setting. I havea MacBook Pro 15 with Lion OS. I get pop up reminders for the seven colleagues whose calendars I have selected. I only want pop up reminders for my own calendar, but don't see any way to make that happen. Opening the "REMINDERS" drop down box at the top of the right hand sidebar removes calendar entries from view (not what I want) and has the same functionality as the "Calendars" button at the top left of the iCal window. Any recommendations would be deeply appreciated.

What exactly is the "Location" calendar? Is it an actual .ics calendar? Or is it a list of locations in directory? If it's not actually a calendar, then it won't show up in the Calendar application. If you want to connect to your LDAP server, you can do that, and it will show up in Address Book, but I don't think locations will be seen. I have not confirmed this though.

How to make different inside/outside margins for only one section?

I'm creating a Pages template and want to have several different section layouts. I've figured out most of them, but haven't been able to get one section to work as I want it.
The problem is that I want a 3 inch left margin on odd-numbered pages, and a 3 inch right margin on even-numbered pages, but for this section only (because it will have graphic objects in those margins). Other sections should have standard symmetrical margins.
I figure this should be possible, but I'm not selecting the right combination of properties. I tried searching the help file for "gutter", which is what the command was back in PageMaker, but couldn't find anything.

With your cursor in the section you want to change the margins, go to the layout inspector (second icon) & click Section. The second selection under Configuration is Left and right pages are different. Then in Layout the left & right margin settings are named inside & outside. You can see the effect by displaying your document 2-up.

Create user with select privilege only one schema

can someone tell me how i can create user with select priviliges only one schema.
i don't want the user to have any select privileges with other schema.
can someone advise me.
Thansk

In general, you would do something like
CREATE ROLE abc_read_only;
FOR x IN (SELECT * FROM dba_tables WHERE owner='ABC')
LOOP
EXECUTE IMMEDIATE 'GRANT SELECT ON abc.' || x.table_name || ' TO abc_read_only';
END LOOP;
CREATE USER your_user ...;
GRANT abc_read_only TO your_userYou create a role, grant the role SELECT access to all the tables in the ABC schema (you can extend this to grant access to views, functions, etc depending on the requirements), and then grant that role to your user.
Justin

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
thank you!

Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Click Wireless Options near the bottom of the next window
Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
Click Save, then click Update and wait a full minute for the Express to restart
Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name. 2.4 GHz devices will connect to your "other" network name.

How to set up SAPconnect with email server

Hi,
Does any one know <b>how to set up SAPconnect with email server</b>
We are using workflow and when it fails it we are sending the notification mail to the user on his company mail id, i.e. [email protected]
This is working in the current production system. We are doing the new development which will replace the current production system. The existing Basis team does not know how it was setup in production system and how to set it up in the new system.
When we send any mail notification from workflow we can see the mail in SCOT transaction but it is not received at the specified mail address.
Can any one provide the configuration steps or any document for this.
Thanks in advance..
Pratik

Hi Pratik,
Check the following link:-
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
these link will help u to config SMTP.
And one more thing u have to do..
Go to SE11 n open Table sxnodes in change mode.
And change F_ESMTP field to false i.e. BLANK for the Field NODE = SMTP.
Hope this will work For U.
Regards
Sachin Dhingra

How to Set A Default Start Time For New Events In Calendar?

How to Set A Default Start Time For New Events In Calendar?

John,
Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
Works just fine. Snippet from the listener follows
BindingContext bindingContext = BindingContext.getCurrent();+
*if ( bindingContext != null ) {*+
DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
Row currentRow = iterator.getCurrentRow();+
if ( currentRow.getAttribute("StartDate") == null)+
currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
if (currentRow.getAttribute("EndDate")==null)+
currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
*}*

How to set a new SCSI number for a second drive?

How to set a new SCSI number for a second drive?
Walter

Walter,
This web site gives a good diagram:
http://www.hitachigst.com/hdd/support/dpes/dpesjum.htm
On a Quantum hard disk drive - they were the original equipment manufacturer (OEM) hard drive provider for Apple, you will see three or four pairs of pins on the green circuit board. They are labled:
AO . .
A1 . .
A2 . .
If no pins are connected, you have SCSI ID Zero This was the standard setting from the factory.
If you short out the pins beside AO .__. , you have designated SCSI ID One.
If you short out the pins beside A1 .__. , you have designated SCSI ID Two.
If you short out the pins beside A2 .__. , you have designated SCSI ID Four.
These values can be added together to get other SCSI IDs. If you have a jumper beside AO AND A1, that will add up to SCSI ID Three.
Some of the quantum drives used tiny black plastic jumpers with tiny metal contacts. I have yet to find a store that sells the tiny ones. I get my larger jumpers from old PC motherboards that are being thrown away. A small piece of aluminum foil will work as a jumper in a pinch. Just make sure it soed not fall off and short something else out!
Jim
PS
CD-ROM drives are set at the factory as ID 3. Internal drives are set at ID 0. I set my external SCSI drive at SCSI 1 so it does not conflict with the internal drive. Internal Zip drives are set at ID 5 and external Zip drives let you choose between 5 and 6. I set my burners at ID 4. Come up with a master plan for your devices like scanners and burners. Apple System Profiler will give you info on the device ID. If the computer fails to boot, turn off all but one SCSI device and make sure of its ID. Then check each subsequent device by powering up only one device at a time while booting from a CD at ID #3.

How to set a default Billing type for a particular Delivery type

Dear All,
How to set a default billing type for a particular delivery type.
My requirement is, we are creating delivery for a Stock Transport Order. Delivery type is NL and the Purchase order type is UB.
When we are creating Billing, it should take Billing type "ZSTO" by default, which is the customised Billing type.
Where we have to do this setting?
In case of normal sales order, this control will be available in the Sales order document types.
In case STO, how to set a default billing type for a delivery type (NL).
Regards,
Rajesh

There is a customization available here no default or hard coded
Normally in a sales doc type we mention which billing type system has to pick
If the billing happens from a PO which billing type system will take depends on the controls set in the areas mentioned below
Go to your delivery type OVLK (say your delivery type is NL)
In that there is a field called default order qty in the order reference tab (say if you maintained DL there)
This DL is called PSEUDO order type
Then in VOV8 for DL based on the billing types mentioned ,system will take the billing doc
For delivery related billing say if you mention say ZF8 in the details of DL in VOV8(provided you have created ZF8)
Then while you bill the delivery doc of NL system will take ZF8
For intercompany delivery you can create ZIV billing type also Pure customization
PO is linked to delivery type ( MM spro settings)--Del type linked to order (pseudo) type---in order type (pseudo) we mention the billing types. Here the flow is bit different that pure SD flow
Though the invoice is crated by manually putting customized Biiling Type and A/Cing doc also generated, but in the VF04 still system shows the same deliveries pending with Billing Type (F2).
This manual is not reqd if the said assignments are done properly
Hope it can assist you.
Thanks & Regards
JP
Edited by: J Prakash on Jun 23, 2010 4:05 PM

How to set background as white colour for Bitmap images in sapscripts?

Hi,
Can anyone let me know that How to set background as white colour for Bitmap images in sapscripts?Actually,I am getting grey as background as defualt for my Bitmap images.
Sorry,in my previous question,I posted viceversa.I am mistaken.
Thanks,
Balaji

Hi,
The problem can be solved by changing the way you save the original image.
Take a look at this thread which explains;
Problem with logo
Regards,
Nick

How to set the short cut key for buttons

Hi
I dont know how to set the short cut keys for the button...can u pls help me out

Do you mean a short cut key for buttons at client side (web browser)? If yes, you could do it with JavaScript~~~ ^o^

HT3546 So i recently bought an Apple AirPort Extreme BaseStation (the mushroom shaped one) and was wondering if someone could tell me where and how to find a power cord and how to set it up with my Macintosh (2011 edition with 1.7.5) Thankyou! :)

So i recently bought an Apple AirPort Extreme BaseStation (the mushroom shaped one) and was wondering if someone could tell me where and how to find a power cord and how to set it up with my Macintosh (2011 edition with 1.7.5) Thankyou!

Welcome!
Last question first, as we need to know what operating system that the Mac is using.
If you are not sure, click the Apple icon in the upper left corner of the screen, then click About This Mac, and post back with the OS X Version number that you see there.
Two possible solutions on the power cord
ORIGINAL OEM APPLE AIRPORT EXTREME BASE STATION POWER SUPPLY AC ADAPTER A1202 if you want a white power supply and white power cord to match up with the Apple device
AC adapter for Apple AirPort A1034 Extreme B... if you don't care what color the supply and cord might be
If you don't already have a Setup Guide.....look here:
AirPort Extreme Base Station Setup Guide v4.2 (Manual)

How to set weblogic 5 or 6 for XSQL servlet

how to set weblogic 5 or 6 for XSQL Servlet

DO you have servlets which print utf-8 data to the client?
If yes then you can just call response.setContentType("text/html;
charset=UTF-8");
and the response will look as expected.
for jsps :
<%@ page contentType="text/html; charset=UTF-8" %> should do the trick.
Nagesh
Michael wrote:
I have the same problem with 7.0. Did you fine a solution?
I'll be very interested to know how you fixed it.
"Danh Hoai" <[email protected]> wrote:
Hi all,
Does anybody know how to set up Weblogic 5.1 server in order to display
UTF8
characters such as Japanese characters?
I am able to display utf8 in Tomcat but not in Weblogic. All I did for
Tomcat is to change the content type of the servlets.
Thank you for your help.
Danh

How to set this filters with 'or' relationship

Hi Pros,
      I have a query as follows, rows and columns are all in structures.
                                                   regular_employees
             active_employees
             lay_off_employees
     I want to set up filter as ' employ_status = 0 or employ_subgroup =2' for this query, please tell me how to set this filters with 'or' relationship.

Hi Yifei,
Create a formula and enter this (let's name this FORMULA_KF):
((EMPLOY_STATUS = 0) OR (EMPLOY_SUBGROUP = 2)) * enter value IF_TRUE + enter value IF_FALSE
Then create the condition to HIDE the rows having those values to be filtered (if this is your purpose)..
Like,
FORMULA_KF <> 1
Is this what you want mate?
Regards,
Loed

How to set a keyframe with setValueAtTime for only one axis?

Similar Messages

Maybe you are looking for