How to set Dynamic screen resolution in flex..?
Hi All.,
I am developing a flex application in adobe flex4. to set the application height is 100% width is 100% and using <flexmdi:MDICanvas> to set the height 780 ,so application get displayed on normal window correctly., But i try to press f11 key the screen size is expanded at the time application size is set exactly, MdiCanvass size is not expanding on screen resolution.
My question is how can I make sure that the application should look uniform across different platform/different browsers and different monitors to display screen resolution auto adjust in mdi canvass also.
With Regards.,
LinFlex-
Hi,
Use the below syntax...
CALL TRANSACTION tcode... OPTIONS FROM opt
... OPTIONS FROM opt
Effect
Allows you to control processing using the values of the componetns of the structure opt, which must have the ABAP Dictionary type CTU_PARAMS. The components have the following meanings:
DISMODE
Display mode (like the MODE addition)
UPDMODE
Update mode (like the UPDATE addition)
CATTMODE
CATT mode (controls a CATT)
CATT mode can have the following values:
' ' No CATT active
'N' CATT without single-screen control
'A' CATT with single-screen control
DEFSIZE
Use default window size
RACOMMIT
Do not end transaction at COMMIT WORK
NOBINPT
No batch input mode (that is, SY-BINPT = SPACE)
NOBIEND
No batch input mode after the end of BDC data.
The components DEFSIZE , RACOMMIT, NOBINPT, and NOBIEND always take the following values:
'X' Yes
' ' No
If you do not use the OPTIONS FROM addition, the following control parameter settings apply:
DISMODE
From addition MODE
UPDMODE
From addition UPDATE
CATTMODE
No CATT active
DEFSIZE
Do not use default window size
RACOMMIT
Successful end on COMMIT WORK
NOBINPT
Batch input mode active ( SY-BINPT = X
NOBIEND
Batch input mode remains active after the BDC data
Jogdand M B
Similar Messages
-
How to set up screen resolution for actual size zoom?
I have a monitor with 109 ppi resolution, and I`ve already set this resolution in photoshop and acrobat preferences, but i can`t find where in illustrator cs5 it can be set up, so i would be able to preview my artworks in correct actual print size.
Go to Edit > Preferences > User Interface and select Scale to lower supported Scale factor.
This will reset adjust the UI to 100%. You can hover over the info icon and see more details.
This happens because your OS scaling level is higher.
Good Luck. -
How do i fix screen resolution message
Your screen resolution is set below our minimum recommendation of 1024 x 600 pixels.
my screen resolution is already set at it's highest: There is a screen resolution problem Your screen resolution is set below our minimum recommendation of 1024 x 600 pixels. You can continue with your current settings, but the newest version of Yahoo! Mail may not display properly. Try increasing your screen's resolution (In Windows or Mac OS Help, search for "screen resolution"). If you're using most versions of Windows, here's how: Right-click on the Windows desktop and choose Properties. In the Display Properties dialog box, click the Settings tab. Use the slider to set your Screen resolution to 1024 x 600 pixels (or higher)There is a screen resolution problem Your screen resolution is set below our minimum recommendation of 1024 x 600 pixels. You can continue with your current settings, but the newest version of Yahoo! Mail may not display properly. Try increasing your screen's resolution (In Windows or Mac OS Help, search for "screen resolution"). If you're using most versions of Windows, here's how: Right-click on the Windows desktop and choose Properties. In the Display Properties dialog box, click the Settings tab. Use the slider to set your Screen resolution to 1024 x 600 pixels (or higher)..Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages -
What should I set me screen resolution to in photoshop CC with my late 2009 27" iMac?
What should I set me screen resolution to in photoshop CC with my late 2009 27" iMac?
If its native resolution is 2560x1440 then some people do find it marginal with a 27 inch screen, but I'd have thought it workable if you know where everything is. People are using that screen res on tiny laptops, but to be fair, they are not much liking it with Photoshop.
I don't know how Retina support works with CC, but I wonder if you could force it on your iMac?
Any Mac users out there know how Retina support works? -
How to change the screen resolution in Sparc workstation.
I am using the CDE screen to login. I need to set the screen resolution to 1100*864. How to set?
solaris 10 current setting is 1280*1024.Specs for Ultra20 machine list ATI graphics as " onboard " chipset and the availability of four (4) other plug-in cards as options.
Depending on the installed graphics card, you must seek different commands, etc. for each change of resolution.
If you do not have the original manuals that accompanied the unit, check Sun`s site for documentation. They list an abundance of info and the " Getting Started " book gives indepth details about setting up the various graphics options for proper use with the various operating systems. ....................... John. -
How we will maintain screen resolution for tmaintaining able control in BDC
how we will maintain screen resolution for tmaintaining able control in BDC. can you give the code or how we have to set it
Hi,
You need to use the CTU_PARAM options with the call transaction method.This is used if you would like to do a commit work once call trnasaction is done. This has also got very important property, for example if your Screen resolution is different from others then the screen (Application) will be different that is you'll be having say 5 lines in your screen where as your friend will be having 8 or 10 so your program might fail in this case. If you set variable DEFSIZE as 'X' it will always use the default screen size and hence avoids error.
Use CALL TRANSACTION 'XXX' OPTIONS FROM w_ctu_params.( type CTU_PARAMS)
This structure contains the follwing.
DISMODE : Display mode (like the MODE addition)
UPDMODE: Update mode (like the UPDATE addition)
CATTMODE: CATT mode (controls a CATT)
CATT mode can have the following values:
' ' No CATT active
'N' CATT without single-screen control
'A' CATT with single-screen control
DEFSIZE : Use default window size (Here we are handling those transaction by giving default window size)
RACOMMIT: Do not end transaction at COMMIT WORK
NOBINPT : No batch input mode (that is, SY-BINPT = SPACE)
NOBIEND : No batch input mode after the end of BDC data.
The components DEFSIZE , RACOMMIT, NOBINPT, and NOBIEND always take the following values:
'X' Yes
This might help u in better understanding...
Re: regarding bdc
Re: ctu_params
Regards
Sudheer -
Hello Everyone!!! I am having tough times solving query on Dynamic Screen Resolution in J2ME. How can you create an application in J2ME that automatically adjusts to the screen resolution to the phone it is being installed. That means if the resolution is small the layout automatically adjusts to the screen resolution and if its bigger then accordingly... Please help....
If you can use a UI framework/toolkit I suggest LWUIT. If not, code using proportions. Avoid absolute values of x, y, width and height. I made a sample at http://smallandadaptive.blogspot.com/2010/12/bar-chart.html
-
How to set dynamic parameter in list of values in parameter property
Hi,
I am using cr4e-all-in-one-win_2.0.1version.I have created .rpt file in that how to set dynamic parameters(from database) in list of values parameter property
Regards,
amolHi,
I am using cr4e-all-in-one-win_2.0.1version.I have created .rpt file in that how to set dynamic parameters(from database) in list of values parameter property
Regards,
amol -
How to set the screen size with nested Iview screen
Can someone show me how to set the screen size with nested IView screen.
at the moment i only try it with trial and error untill it looks somewhat close. Is there a property in VC to set the size for Height and width.
The same question is for the form. the form elements inside the form is easy but the actual form is still a challenge.Hi,
Yes you are correct ,Still the Form and iview are not able to change thier Layout Structure using a Propery.
it is available with VC7.1
Govindu -
How to set full screen camera on ios 8 on iphone5s
How to set full screen camera on iphone 5s having an ios8
HI,
Give the width in % instead of mentioning in pixels.
ie. for full width, give 100%.
Make sure the layout is GridLayout.
Regards
Fahad Hamsa -
How to set dynamic color , based on xml element
Hi,
We have a requirement, where based on certain conditions, a cell will be shown in a specific color. We would like the coloir to be based on an XML element. The xml element will have values like '#FF00FF' etc..
We tried using xsl attribute with the following syntax ,
<xsl:attribute xdofo:ctx="block"name="color"><?stdcolor?></xsl:attribute><?end if?>
where stdcolor is the xml element, but when we use this , this is giving a syntax error.
Let us know, if this is possible or is there any other alternate way to do this.
Regards,
- Vasu -Hi Vasu,
http://winrichman.blogspot.com/2008/09/how-to-set-dynamic-color-based-on-xml.html
use the following :)
<xsl:attribute xdofo:ctx="block" name="color" ><xsl:value-of select="stdcolor" /></xsl:attribute>
TO get the colors you wanted , you can refer to
http://www.w3schools.com/Html/html_colors.asp -
I have a question that ...
i have 2 options --
when select 1st option , show group1 screen
when select 2nd option, show group2 screen
like the follow ..which is pretty work!....but i have another question that how to set the screen field ..
my question is that if i select group1 screen...i want to set
if S1_EBELN = '' and S1_IHREZ = ''.
message e398 with 'pls input one of these two options!'.
elseif S1_EBELN ne '' and S1_IHREZ ne ''.
message e398 with 'Only one of these two options input is allowed!'.
endif.
i've tried to insert these statement within the LOOP...but not work ......
so can anyone know how to set?
PARAMETERS:
R1 RADIOBUTTON GROUP OPT1 USER-COMMAND R DEFAULT 'X'.
PARAMETERS:
R2 RADIOBUTTON GROUP OPT1.
SELECTION-SCREEN BEGIN OF BLOCK RPT1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS: S1_BUKRS FOR EKKO-BUKRS MODIF ID ABC.
SELECT-OPTIONS: S1_EBELN FOR EKKO-EBELN MODIF ID ABC .
SELECT-OPTIONS: S1_IHREZ FOR EKKO-IHREZ MODIF ID ABC .
SELECTION-SCREEN END OF BLOCK RPT1.
SELECTION-SCREEN BEGIN OF BLOCK RPT2 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS: S2_BUKRS FOR EKKO-BUKRS MODIF ID DEF.
SELECT-OPTIONS: S2_MBLNR FOR MKPF-MBLNR MODIF ID DEF.
SELECT-OPTIONS: S2_XBLNR FOR MKPF-XBLNR MODIF ID DEF .
SELECTION-SCREEN END OF BLOCK RPT2.
IF R1 = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'DEF'.
screen-input = '1'.
SCREEN-required = '1'.
SCREEN-INVISIBLE = '1'.
screen-input = '0'.
screen-output = '1'.
screen-active = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSEIF R2 = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'ABC' .
screen-active = '0'.
screen-input = '0'.
screen-output = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.Modified ur code .
tables : ekko, mkpf.
PARAMETERS : R1 RADIOBUTTON GROUP RG USER-COMMAND R DEFAULT 'X'.
PARAMETERS : R2 RADIOBUTTON GROUP RG .
SELECTION-SCREEN BEGIN OF BLOCK RPT1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS: S1_BUKRS FOR EKKO-BUKRS MODIF ID ABC.
SELECT-OPTIONS: S1_EBELN FOR EKKO-EBELN MODIF ID ABC .
SELECT-OPTIONS: S1_IHREZ FOR EKKO-IHREZ MODIF ID ABC .
SELECTION-SCREEN END OF BLOCK RPT1.
SELECTION-SCREEN BEGIN OF BLOCK RPT2 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS: S2_BUKRS FOR EKKO-BUKRS MODIF ID DEF.
SELECT-OPTIONS: S2_MBLNR FOR MKPF-MBLNR MODIF ID DEF.
SELECT-OPTIONS: S2_XBLNR FOR MKPF-XBLNR MODIF ID DEF .
SELECTION-SCREEN END OF BLOCK RPT2.
at selection-screen output.
IF R1 = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'DEF' .
screen-active = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF R2 = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'ABC' .
screen-active = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
at selection-screen .
if r1 = 'X'.
if s1_ebeln[] is initial and s1_ihrez[] is initial..
message e001(zxx) with 'pls input one of these two options!'.
endif.
if NOT s1_ebeln[] IS initial.
IF NOT s1_ihrez[] IS INITIAL.
message e001(zxx) with 'only one entry in Ebeln or Ihrez is
allowed'.
ENDIF.
ENDIF.
endif.
START-OF-SELECTION.
WRITE:/ 'hi'.
***add on
split the text into two texts .
<b>if NOT s1_ebeln[] IS initial.
IF NOT s1_ihrez[] IS INITIAL.
message e001(zxx) with text-001 text-002.
*'only one entry in Ebeln = text-001
or Ihrez is allowed'. = text-002.</b>
regards,
vijay -
How to create dynamic screen using module pool programming
Hi,
Could anybody help me how to create dynamic screens?
I am developing a screen with HR Person with assignment info. If PERNR have multiple assignments, i need to show all the details one by one. How to show the details on screen. I need to call one by one assignment information dynamically.
Please suggest me how to do, apart from using table controls.
Thanks,
KamalYou may have the below options:
1) Table Control
2) Individual fields
3) ALV
4) pop-up screen -
Qosmio X500 - How to increase the screen resolution?
Hi,
Does anybody know how to increase the screen resolution? My qosmio X500 is 1920 x 1080 and I want to raise it to 1920 x 1200.
Thank you/RedHey
1) I think the screen brightness is about 180 nits for this qosmio model. If I change the graphics card, can I increase the brightness to 300 NITS levels? If yes, which card do you suggest? If not, how can I achieve this?
2) When I view the screen in 100 % magnitude, then the texts are too small to read. But then when I view the screen in 125 % or higher, then the texts go blurry. Is there a way to avoid this? -
I want to be able to monitor my teen daughter's computer from home using screen sharing. Anyone know how to set up screen sharing when my daughter's school has her computer set up for Apple Remote Desktop?
ARD won't be as smooth as you think over the Internet and be a security risk for your daughter.
Your best bet would be to install nannyware, then when she's asleep you can review the logs.
This is the best and Mac friendly
http://www.internetsafety.com/
Maybe you are looking for
-
Constant Pop-up Warning Message- PhotoshopElementsSyncAgent.exe-No Disk
How can I stop this constant pop-up box from appearing on my computer screen every 30 seconds even when Elements is not running. Never had it before until I turned my computer on in May- I am wondering if something to do with the change over for back
-
Creating a custom datasource. Please help!
Hi Experts, I'm creating a custom datasource in RSO2 to extract data from a custom view based on three z tables. I have filled the view with the join conditions and the fields. After activating it, I have checked the data and it's correct. The proble
-
Vehicle Fuel Consumed Report in SAP
Hi Gurus Is there any report which will show monthly vehicle consumed report Analysis. I have to take the tables equi and imrg but to to link this tables which are in t code ie03 and ik17 it is urgent Thanks in advanced Piroz
-
Differences and Similarities between MIC and PC3.0
Hello Friends, Can anyone please provide me information about the following: 1. Is PC3.0 next version of MIC? 2. Can MIC be upgraded to PC3.0? 3. If yes, how the data is migrated from MIC to PC3.0? 4. What are the master data objects in MIC exactly
-
Using Time Machine to create an OS Clone
Can anyone provide me with either instructions or a link that explains whether you can create a clone backup of your OS. I want to clone my current Leopard OS set up onto an external drive that can be bootable if my internal drive for some reason cra