How to set folder view to text wrap the tittles?

Hi!
I always use folder view to go through my documents, but some of the folder names are too big so it only shows the beggining and the end of each tittle. So it looks like this...
How can I change that to show more lines and wrap the texts?
kind of like this when you select it, but with more lines?

Maybe this:
Show Full File & Folder Names on the Mac Desktop
Show Long File & Folder Names on the Mac OS X Desktop

Similar Messages

  • How to set different view parameter programmatically in the same task flow

    Hello everyone,
    I have a view activity A that calls another view activity B with a link. In this link the action is set to a method (I use JSFUtils class: http://jdeveloper-adf.googlecode.com/svn/trunk/TGPrototype2/ViewController/src/com/tgslc/defaultManagement/utils/JSFUtils.java):
    public String goToB() {
    String paramToPass = "someParameterTakenInSomeWay";
    JSFUtils.setExpressionValue("#{pathToViewB_pageBPageDef.paramName}",paramToPass);
    return "openActivityB";
    where openActivityB is the control flow case to call B.
    In the B pageDef file I have set a parameter "paramName" without any value:
    <?xml version="1.0" encoding="UTF-8" ?>
    <pageDefinition xmlns="http://xmlns.oracle.com/adfm/uimodel"
    version="11.1.1.59.23" id="pageBPageDef">
    <parameters>
    <parameter id="paramName"
    value=""/>
    </parameters>
    <executables/>
    <bindings/>
    </pageDefinition>
    But at running time I have a oracle.jbo.expr.JIEvalException:
    JBO-25077: Name paramName not found in the specified object: pathToViewB_pageBPageDef.
    The question is: how can I set the parameter programmatically from the view activity A?
    Note that I use this method to set the parameter because in the real application I have many "view activity A" that will call B, but all of these have to set this parameter.
    I use JDeveloper 11.1.1.4.
    Thanks in advance,
    Baduel

    Hi,
    this is because PageDef B represents a binding container that is not active to the time you try to call it. The binding container becomes available when navigating to the page but not before. Instead:
    1. define a managed bean in pageFlowScope and expose a setter/getter method to hold the value to pass on
    2. Reference the managed bean in pageFlowScope from the attributebinding NDValue property using EL
    3. Set the managed bean value before navigating to view B
    Frank

  • 10.6.6 - How to set custom view options for specific folders

    How is it that Windows has had the ability to ability to set custom folder view options forever and OSX can't. What is the big deal? Just do it. Whenever I set the folder view options it changes the view for all the folders. I can do folder specific changes as long as the finder window is open then I close it and open it again every folder is the same again. It's just an annoyance and it's something so rudimentary it's embarrassing.

    Try the following:
    I want to have, say, one folder in list view
    Open that folder, set it to list view, type command-J, and in the view-options window that opens, check the box at the top for "Always open in list view".
    then the subfolder of that folder I want to have in cover flow view. permanently.
    Open that folder, change it to cover-flow view, and in the view-options window check the box at the top for "Always open in cover-flow."
    Those two folders should "remember" the custom views that were set for them.
    There's additional discussion about the meaning of the"Use as defaults" button in this thread
    http://discussions.apple.com/thread.jspa?messageID=13063792
    My own take is that folders that have not been customized by checking the "Always open in xxx view" box will by default open in the same view (icon vs list vs column, etc) that was in effect for the previously opened folder. *Within each view*, you can set the default parameters (text size, etc) for a new folder by setting up a folder the way you like and then checking the view options box for "Use as defaults" at the bottom.

  • How to repair Folder view after Move

    After several moves of pictures to a new disc (via File, Move within Photoshop Elements Organiser 9) the folder view no longer shows the correct photos.
    The photos are in the correct locations and the properties also show the correct location.
    If I select a directory in folder view however, several photos are shown that are not in that directory.
    I tried to repair the catalog, but that didn't change the problem.
    Any ideas?
    I am very much missing a facility in the Organiser to move directories, a complete directory tree or just the disk letter of my catalog.

    See:
    http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Move_your_photos
    (still true in PSE9)
    and
    http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Folder_Location_view
    I have found many posts about this bug and I am not sure its reasons have been understood, since it seems very difficult to reproduce the situation when it does appear. I am not sure how to correct that bug. I have never had such a problem because I work normally in thumbnail view, although the folder view is useful for me in certain circumstances.
    Moving the folders by drag and drop in the left panel in folder views should work.
    Moving folders from a drive to another should also work.

  • How to set a specific starting time for the falling snow code snippet

    Hi everyone
    I want to use the falling snow code snipet but I don't want it it to start as soon the movie starts.
    So how to set a specific time to start the falling snow?
    Thanks
    Patricia

    put the code (that's not in a function body and excluding variable declarations and import statements) in a function body and call it using the timer class.

  • How user can get a Sales Text for the any Line Item in the Billing?

    Salute Masters ! !
    How user can get a Sales Text for the any Line Item in the Billing?
    It's coming for other Order (Line Item for Bought out Item at Project Site - Some Item they procure at project site & complete the task).
    Where I can configure in system for all.
    Rgds
    Srivastav
    09973504950

    Hi,
    Sales text can be copied from customer to order , order to delivery and delivery to billing .
    Check the T-code : VOTXN , do the customization as per your requirement.
    check the below link :
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/dd/55f993545a11d1a7020000e829fd11/content.htm

  • In flex, How to set a value to one parameter, the parameter defined in a cffunction in a cfc file

    In flex, How to set a value to one parameter, the parameter
    defined in a cffunction in a cfc file, In the cffunction there are
    much cfargument, I want set a value to one of them, such as the
    cfc:
    <cffunction access="remote" name="myShow" output="false"
    returntype="struct">
    <cfargument name="ID" type="numeric" default=0>
    <cfargument name="GoodsID" type="string" default="">
    <cfargument name="DestTime" type="string" default="">
    <cfargument name="DestCount" type="numeric" default=1>
    How I set a value to only parameter one of them , such as set
    GoodsID when use mx:remoteObject.
    Thanks for your help

    Got maybe a solution for you, I have just tested it.
    So, the idea is to use intermediate variables. Imagine Var1 and Var2 variables that you refresh with your more or less complicated queries. Then what you can do is to refresh your final variable Var3 with a query using your intermediate variables. Here is an example for Oracle:
    select #Var1+#Var2 from dual
    This way you can make a chain of dependent variables: Var3 is using Var2 and Var2 is using Var1.
    Hope it helps.
    Shamil

  • How to set a specific width to all the TextInputs used in a mxml file on its creation complete?

    How to set a specific width to all the TextInputs used in a mxml file on its creation complete?

    Hi subhajit nag,
    I think the best approach would what I say is if you can make use of a Global variable or using a Singleton class having a variable which can be accessed globally through out the application.
    Below is the sample what I am talking to:
    So in below example you can access the variables textInputWidth and textInputHeight globally throghout the application since you have decalred them in main mxml file.
    You can access these variabled in another mxml file as Application.application.textInputWidth and Application.application.textInputHeight. So if at all you are required to modify these values you are only required to modify at a single place in main mxml file..thats it.
    If you are use any Singleton classes like ModelLocator you can place these variables in this class and refer from that class.
    Hope this resoved your problem..
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical">
    <mx:Script>
      <![CDATA[
       [Bindable]private var textInputWidth:int = 250;
       [Bindable]private var textInputHeight:int = 25;
      ]]>
    </mx:Script>
    <mx:Canvas id="canvas1">
      <mx:TextInput id="txt1" width="{textInputWidth}" height="{textInputHeight}"/> 
    </mx:Canvas>
    <mx:Canvas id="canvas2">
      <mx:TextInput id="txt2" width="{textInputWidth}" height="{textInputHeight}"/> 
    </mx:Canvas>
    <mx:Canvas id="canvas3">
      <mx:TextInput id="txt3" width="{textInputWidth}" height="{textInputHeight}"/> 
    </mx:Canvas>
    <mx:TextInput id="txt4" width="{textInputWidth}" height="{textInputHeight}"/>
    <mx:TextInput id="txt5" width="{textInputWidth}" height="{textInputHeight}"/>
    </mx:Application>
    If this post answers your question or helps, please kindly mark it as such.
    Thanks,
    Bhasker Chari 

  • How to Set Up 2 Skype Accounts on the Same MacBook Pro Computer

    How to Set Up 2 Skype Accounts on the Same MacBook Pro Computer

    http://community.skype.com/t5/Mac/How-can-I-run-two-Skype-accounts-on-a-Mac/td-p /169126
    http://everydaylife.globalpost.com/run-two-skype-accounts-same-mac-computer-3524 6.html
    http://www.profesional.co.cr/technology/multiple-skype-accounts-mac-os-or-window s-same-time/
    Note that you posted in the Mac Pro desktop forum

  • How to Set JFilechooser to show file with the same extension in the filetyp

    How to Set JFilechooser to show file with the same extension in the filetypes??
    help

    I also don't understand, but if you mean how to display only files with a certain extension in your JFileChooser then you should have a look at the JFileChooser API:
    http://java.sun.com/j2se/1.5.0/docs/api/javax/swing/JFileChooser.html
    The introduction shows an example of how to do that.

  • My friend has an iPhone but doesn't use iMessage. How can I send her regular texts with the new iOS 7 update?

    My friend has an iPhone but doesn't use iMessage. How can I send her regular texts with the new iOS 7 update?

    That's because her phone is recognized in the Apple database as an iPhone.  It should eventually convert to SMS but that's above my level of expertise here so hopefully someone else can come along and help you further.  She could just turn on iMessage and solve the problem. Ha!
    Good luck!

  • HT3477 Again, another page saying that the device supports WiFi guests it but HOW to set it up? Where in the ultility is it?

    Again, another page saying that the device supports WiFi guests it but HOW to set it up? Where in the ultility is it?

    Open AirPort Utility and click Manual Setup
    Click the Guest Network tab below the icons
    If the Guest Network tab does not appear, you have the Time Capsule connected to a modem/router, not a simple modem. The Guest Network cannot be enabled unless you have the Time Capsule connected to a simple modem.

  • How can I choose 60x60 pixel in Automator's Set Folder Views?

    Hi, I was looking for something that can change Folder Views for several folders at once; I think Automator can help me do that, but I'm stuck on two problems:
    1. It doesn't allow me to choose 60x60 pixel, only 56x56 or 64x64.
    2. It doesn't allow me to set the grid spacing.
    Is there a way to choose 60x60 in automator (it is selectable in Finder's Show View Options)? If it's not possible, what's the most likely workaround? Applescript? Or perhaps some 3rd party apps?
    Thank you for your time.

    Try looking into ' *mac os x: batch rename freeware* ' via google search?
    http://www.google.com/#hl=en&expIds=27022&sugexp=leprodsca4&xhr=t&q=MacOS+X%3A+batch+rename+freeware&cp=31&pf=p&sclient=psy&aq=f&aqi=&aql=f&oq=Mac+OS+X :+batch+renamefreeware&gs_rfai=&pbx=1&fp=8bc48c66f0d3c525
    An example of a batch rename file utility that may (or not) be of some use...
    • NameChanger - MRR Software:
    http://www.mrrsoftware.com/MRRSoftware/NameChanger.html
    • Name Mangler - Elegant batch file renamer: low cost, fair trial period
    http://manytricks.com/namemangler/ - this may be worth a try.
    There also are some instructions or ideas online and in your Help viewer on how to use
    Automator to do these kinds of tasks within the supplied & supported Mac OS X system.
    Or other methods within the various OS X unix systems to create a workflow.
    Good luck & happy computing!

  • Trying to set a hyperlink when text wraps to next line

    I'm trying to set a hyperlink in InDesign. The URL text wraps to the next line. One time this worked fine and the link was correct. For two other instances, it did not work. When I checked the link in the PDF file, it only "grabbed" the first portion of the hyperlink address. Anything after the first "/" was lost. Is there a way to make sure the entire URL address gets included in the hyperlink? Thank you!

    Acrobat has trouble autorecognizing URLs that break across lines. You ned to create a "real" hyperlink from the text in ID, then include them in the export. If you don't know how to do that, see the Help.

  • Kde4 folder view icon text

    I'm still getting used to kde4, and at first I hated it but now it's slowly starting to grow on me. My question is: is there a way to change how much text is displayed and the spacing of icons in the "folder view" widget. Right now folder view displays the first 8 characters of a file, and that's not quite enough.

    hrsvan wrote:
    I got kde 4.2 today and the problem even got worse, now I cannot go into any configuration-menu... and at one point I couldn't even get into kde..! I installed gnome, which runs just fine, but I want back and toy around with kde. I've tried completely removing kde from my computer, but the same problem I get when I install it again.
    I did a 'locate kde' which shows a lot of kde-things even though it should be removed from the system.
    I am thinking of doing a complete archlinux reinstall, but that is against my principles... so, how can I completely remove kde from my computer and start all over again?
    Oh boy, no need for this.  It won't even help you a thing.  Just mv you .kde4 folder to i.e. _kde4_bak.  This resets completely.
    HTH,
    -- Maik

Maybe you are looking for