How to set iPad VPN dns
I want to connect my company VPN, after I Login to VPN, I can not use DNS name to find my web application. It seems the DNS name can be resolve. But if I use other device such android system it work without this problem.
The following is the basic setup for DDNS on the AirPort using AirPort Utility v5x:
AirPort Utility > Select the base station > Manual Setup >AirPort > Base Station tab > Edit ...
Use dynamic global hostname (checked)
Hostname: <enter your DDNS service domain here>
User: <enter your DDNS user account name>
Password: <enter your DDNS user account password>
Click "Done."
AirPort Utility > Select the base station > Manual Setup > Disks > File Sharing tab > Share disks over the Internet with Bonjour (checked)
Similar Messages
-
Hi everybody,
could anybody help me to set up Dynamic DNS in the Airport Extreme? I am using Airport Utility 5.5.3
I also have dlink dns service active
Thank You
Manolo FernándezThe following is the basic setup for DDNS on the AirPort using AirPort Utility v5x:
AirPort Utility > Select the base station > Manual Setup >AirPort > Base Station tab > Edit ...
Use dynamic global hostname (checked)
Hostname: <enter your DDNS service domain here>
User: <enter your DDNS user account name>
Password: <enter your DDNS user account password>
Click "Done."
AirPort Utility > Select the base station > Manual Setup > Disks > File Sharing tab > Share disks over the Internet with Bonjour (checked) -
Hello,
I'm having trouble setting up a VPN using MAC OSX 10.4.11 Server. I have and XSAN system and one of my volumes has been down for quite a while now. There is a very kind MAC IT professional that is willing to help be troubleshoot my system but he needs to be able to access my system remotely. I am able to connect the MDC to DSL but I haven't been able to set up the VPN. Please help, this is an emergency. Thanks!
Marcohave you forwared the ports on your router? Why not let him in via teamviewer? its free and mac compatable
-
How to set up vpn on MacBook Pro?
or choose safe vpn, for watching uk tv abroad?
Hello misterbrown11,
Thank you for using Apple Support Communities.
For more information, take a look at:
OS X Mavericks: Set up a connection to a virtual private network
http://support.apple.com/kb/PH14079
Have a nice day,
Mario -
How to set iPad safari browser to work as offline?
I downloaded a webpage. Want to put it on iPad. It's working fine. When i open the page it shows me the content of downloaded page for a sec. After that page is changing automatically with below message.
Cannot Open Page
Safari cannot open the page because it is not connected to the internet.
Is there any option to set browser to Work As Offline?
Thank YouAs far as I remember this feature will be implemented on iOS 5.
What you do is saving the page as HMTL to the local memory, so you are not able to open it by entering the web-adress.
Best regards
Grisu -
How to set iPad Mini to download files over 50MB?
I am downloading GarageBand to the iPad Mini and it says I need to connect using Wi-Fi to download files over 50MB, the question is why do I need to connect to a Wi-Fi Station? I have an unlimited LTE connection, what am I paying it for if I need to connect to a Wi-Fi to download files?
You can try using a MiFi.
http://en.wikipedia.org/wiki/MiFi -
How can I set iPad and iPhone with IOS6 to do not remember wifi and proxy credential
My company want to implement the Password Policy to limit the failure logon count.
Such as Lock users if they try logon with invalid password for 3 times.
The problem occur on iPad and iPhone my iPad using IOS6. and user had change their password.
iPad and iPhone remember the Wifi and proxy credential. and try to connect with the saved credential.
I monitor on my system and found Wifi connection try 2 times with saved credential and prompt for new password
When I enter the corrected new password . So I the proxy server detected the invalid login 3 times or more and lock those account.
So could anyone told me on how to set iPad and iPhone to do not save the user credential... ?
Thanks very much
WeerayutEnable Airplane mode, then turn on WiFi
-
How we set up multiple websites on OSX Server
BACKGROUND
After fiddling and futzing around for weeks (actually since last year) I've finally figured out how to set up multiple websites (virtual sites) using one port and one IP address. While there seems to be lots of discussion on this topic, it seems that the basic assumption is that one knows everything about websites, DNS and all that stuff, which I do not.
When our network was originally established the engineer set up a wiki and also configured webmail, so we had two sites, one secured for mail and the other open for Calendar and the wiki. We were not hosting any websites locally because our school website is hosted by a company in New England.
This year I wanted to set up websites for teachers and students. As great as the wiki is, there are some things it just can't do as well as a website. So I figured if I set up the sites teachers could link back and forth from one to the other. In addition kids could now start to use a real website instead of the cobbled together file mess I had when we ran a Windows network. Also iWeb is a much more accessible tool than FrontPage.
SERVER SIDE:
Snow Leopard Server - 10.6.4
There are two - actually three pieces if you want your iWeb clients to connect to the server: Server Side Web Services, DNS and, in my case, FTP.
================================================ SERVER SIDE - WEB SERVICES
If you haven't turned on Web services, you'll need to open Server Admin and do that. If you don't know how to set up web services - just reply and I'll step you through that as well.
Once web services are set up and turned on, you'll see it listed under your server’s name in the Server Admin sidebar. Click on "Web" and then click on the "Sites" tab at the top of page. This is where you list all your sites.
Click the plus button and enter the fully qualified name of your site, for example: "students.myschool.org". Don't use the defaults here (no name) - that's what got me in trouble before. BE SPECIFIC!
You'll be looking at the "General" tab (the other tabs, "Options", "Realms", etc. we'll deal with in a second).
On the "General Tab", the default IP address ("any") and port (80) is just fine. We'll run everything over port 80. (Apache figures all the virtual site stuff out - you don't need your rocket science degree for that.)
"Web Folder:" is important because this is how you'll "segment" your websites. While I would NEVER do this again, we have a solid state hard drive for the OS and a RAID array for our data files. IF you have that, make sure you do NOT use the default "Web Folder" because it will store all your files on your solid state drive. There may not be enough room, over time, on that drive. I've not experienced it yet, but it's my understanding that if the drive fills up, the server shuts down.
I store my web sites on a folder on the RAID array.
Everything else on that tab can be left as the default. (Just make sure that you have an "index.html" or "index.php" file in your web folder root, but iWeb will take care of that for you.)
I would put in your email address in the "Administrator Email:" field.
Under "Options" you really don't have to put anything. I've tested making websites with iWeb and it doesn't appear that anything needs to be checked.
Nothing needs to be entered in "Realms" as well from what I see working w/ iWeb.
The defaults in "Logging" are fine.
You can leave "Security" alone, but we do have a (self-issued) certificate listed for our webmail site.
"Aliases" is important. Under "Web Server Aliases" you enter how you want the site to respond to when users type in a URL in their web browsers.
When our web server was initially set up the engineer set up "wiki.myschool.org" on port 80 and "mail.myschool.org" on port 443. In the aliases section was nothing but a "*" (the wildcard character). That means, from what I can figure out, that the webserver will respond to these sites regardless of what is typed in the URL. (Well, something like that - point is, if you create OTHER websites, you'll NEVER get to them because the wildcard character in the "Aliases" section, in effect, grabs those web requests and redirects them to the sites that are already there.
In my case I deleted both of those wild card characters. For my "wiki.myschool.org" site, I entered "mail.myschool.org". That means if you type EITHER "wiki." or "mail.", go to the site that’s stored in the “Web Folder” we set up when those sites were created.
For "mail.myschool.org" I just DELETED the wildcard character. I wanted that site (since it was secured) only to respond to "mail." - nothing else. (You're not going to that secured site for any other reason than to get your mail.)
"Proxy" can be left blank. Have no idea what that does. As time permits I'll do some research and figure out what it's used for.
"Web Services" is if you want to provide any MORE services to this particular site. Most likely you'll want to uncheck all the boxes. For our "wiki." site, we have checked "Wikis", "Blogs", and "Calendar". For our "mail." site we have those checked PLUS "Mail".
I would create a separate "Web Folder" for each of your sites. I don't know if that's a requirement but for housekeeping purposes, I would keep the sites separated. And I SUSPECT that it's "best practice" to separate your wiki from your other websites.
SERVER SIDE - DNS
OK...now you have to make your site reachable and the only way to do that is to set up DNS so that folks don't need to type in the IP address of your web server. You need to set up DNS inside your network and, if you want folks in the outside world to reach your website, you'll need to set up an external DNS as well. I'm going to cover INTERNAL DNS - if you don't know how to set up EXTERNAL DNS - reply or email me and I'll post those instructions.
Most likely you have already created Zones for you network...all you really need to do is create "Aliases" so that when you type "students.myschool.org" your web browser will know that site resides on IP address XXX.XXX.XXX.XXX.
If you've set up Zones then you already have a "Machine" setting that translates your server’s name to an IP address and vice versa.
All you need to do is create an "Alias" (CNAME) record for, in this case, "students". You’ll see the choices for types of records when you click the "Add Record" button.
There are only two fields to configure for a record: "Alias Name" - in this case "students" and "Destination" - in this case "servername.myschool.org". (You've already entered a machine record that says "servername" = 192.168.1.x.)
That's it for Internal DNS.
SERVER SIDE - FTP
Now you have to get iWeb to communicate with the webserver.
There are only three ways iWeb will communicate with webservers: MobileMe, Local Folder and FTP Server.
Local Folder is really only practical if you want to host a website on a laptop (I was blown away initially when I found out that all Macs had a built-in web server - how neat is that?). I think there are some very cool things teachers could do with configuration, and, of course, you wouldn't need to set up any web services on the web server, but that's for another discussion. You need to set up FTP services on the web server.
Turn on and enable FTP on your webserver.
You can leave the defaults for "General", "Messages" and "Logging". "Advanced" is the only thing you want to set. I set "Authenticated Users See:" to "Home Folder Only". I set the "FTP Root" to the same root folder in which I plan to store my web sites (/VOLUMES/RAID Array/WebServer/Documents). This setting sets that folder only to be accessible via FTP.
I would suggest returning to your DNS settings and adding one more "Alias". Set "ftp." to point to your webserver. Why? So folks can edit their sites from home (see below).
CAVEAT: If you are running FTP on other servers, make sure that the settings here do not conflict with the settings on the other servers. For example, I'm running FTP on my file server so that my scanners can communicate with it. However, I configure my FTP settings by machine name and NOT "ftp.myschool.org".
================================================
CLIENT SIDE - CONFIGURING iWEB
Now you have to configure iWeb so that it will communicate with your server.
Click on the "Site" icon so that "Site Publishing Settings" appears.
Publishing:
"Publish to:" = "FTP Server"
You can set the "Site name:" and "Contact email:" to whatever you want. But see below!
FTP Server Settings:
"Server address"=ftp.myschool.org (you could also enter in servername.myschool.org or the IP address. However, if you want folks to be able to work on the site from home, you will need to configure external DNS for that. If you use the IP address, you're out of luck for remote access to the site. (You can do it but it's beyond the scope of this discussion.)
"Username" & "Password" should be your user's network login credentials.
"Directory/Path" - this is important. Remember, you set your "FTP Root" to be "/VOLUMES/RAID Array/WebServer/Documents". If you leave this field blank then the website will be dumped into this folder. If you are only setting up one site, that may be OK. However I wanted to set up a "students" site folder, a "faculty" site folder and a separate site for our literary magazine.
THEREFORE: I have, in my ..../Documents folder (on the server), a "students" folder, a "faculty" folder, and a "litmag" folder.
SO...in my "Directory/Path:" field, I have "/faculty". That means the full path to this website is "ftp root/faculty" or "/VOLUMES/RAID Array/WebServer/Documents/faculty" (You don't need a trailing "/" character. iWeb will automatically append the folder for you user depending on what you entered in "Site Name:" in the "Publishing" area.
Website URL:
This is the root website depending on whether it is "students" or "faculty". Since iWeb will append the site name to this root website, I accomplished what I hoped to accomplish in this post (http://discussions.apple.com/message.jspa?messageID=12288561#12288561).
Faculty sites will be @ http://faculty.myschool.org/username. Students @ http://students.myschool.org/username. PERFECT!
iWeb is such a GREAT tool - NOW the kids can start using it!
I want to reiterate that this works for our school but it should work for you as well. There may be better ways to do this but it works for us.
Hope this has been helpful and you won't have to spend weeks trying to figure this all out by yourself!OK...here's how we did it.
To get access to the website you created from outside your network there are a couple of steps.
First, you have to have a STATIC IP address from your ISP. If you have a T1 circuit, no problem...you usually get a couple of static IPs you can use. However, if you have a cable modem circuit, most likely you have a dynamic IP address which changes when you connect to the internet. Usually a static IP will cost a bit more because the ISP has to go through a couple of steps to set it up for you. But once you have the address, you now have a way for folks outside your network to connect with you.
(I’m also assuming that you use a router of some sort through which traffic flows out to the internet and that you aren’t using connection sharing or something like that.)
The next thing you need to do is have your new static IP address associated with the server on which you are hosting your website. You've probably already done that if your website works inside your network. However, you've associated a private ip (192.168.x.x, etc.) to your web server. That doesn't mean anything to folks on the outside because private IP addresses are just that - private - folks can't access them. (I won't get into VPN because that's a whole other topic.)
The way you associate your new static IP address to your web server is through some sort of dns application from your ISP. For example, we use TierraNet to manage our external DNS information. They have a web interface control panel that is very similar to the DNS interface for XServer. You can create CNAME records (aliases - other ways that folks can access your servers).
Basically you create an "A" (CNAME) record with a fully qualified domain name (e.g. webserver.myschool.org) and point it to your public IP address (XXX.XXX.XXX.XXX) which you just got from your ISP. It's going to take a while (24-48 hours) for this change to take effect. BTW, you can create as many “A” records as you want. For example mail.myschool.com and wiki.myschool.com could point to the same place.
You want to make sure that the fully qualified domain name you enter in the external dns utility matches the name you used when you created your internal dns records on your XServer.
OK...so now folks can get to your domain - but, remember, you have a private network IP scheme between them and you. You now have to tell your router that when web traffic arrives, allow it inside the network and direct it to your web server.
Let's say your public IP address is 205.100.112.50 and your web server is 192.168.0.5.
You have to create, in your router’s "Security Zone" (router companies call them different things) a couple of rules. Usually the first rule is: "Let everything inside the network get out to the web." You've probably already done that if folks inside the network can reach the internet.
You then have to tell the router to allow web traffic (port 80) into your network AND redirect that traffic to 192.168.0.5.
We use AdTran routers and they have a web interface which allows you to write "rules" affecting public and private traffic. Public is folks outside the network, private is folks inside.
AdTran calls them "Security Zones" and you modify those zones with policies.
So my "Policy" would say, in the above example, redirect traffic from my public IP (205.100.112.50) -> to my web server -> (192.168.0.5).
THEN you have to modify this policy with what AdTran calls "Traffic Selectors". You've said, OK, you can get in, but WHAT can get in?
The "Traffic Selector" is written to say: "Permit" "TCP" traffic from 205.100.112.50 only through Port 80. (That's the port that web traffic goes over. If you wanted a secure website, you'd add another traffic selector that opens port 443, for example.)
I'll tell you I'm no genius when it comes to this. I called AdTran and had them configure my router for me. I told them what I wanted done, they remoted into the router and configured it. But then I could go to the web interface and see what they did and then added rules later on when I wanted, for example, to get access to the network via Apple Remote Desktop or VPN into the network on my iPad.
I'd bet that your router has a maintenance agreement that includes this service and if it doesn't it should have.
I did find that I still had issues when I tried to set this up originally and it had to do with the ORDER of the policies. I can’t remember exactly what the issue was, but, effectively one of the policies highjacked traffic before the policy that I wanted got triggered. Simply moving them around in the list fixed that issue. So if you have this set up but still can’t access the site, check the order of your rules.
I don’t know if that helps or not, but I try to think about this stuff conceptually and then get someone to help me with the details. I work with this stuff so infrequently that I forgot how I did something 6 months or a year ago. I’m in the process of creating a wiki for the school which documents all this stuff, but that’s a major undertaking.
Cheers,
John -
Setting up SLS & DNS in particular
I would really appreciate some step-by-step guidance on setting up SLS and DNS in particular. I've read all Apple's documentation and dozens of guides and discussions but remain confused about several points, and my set-up still isn't working correctly.
I have the latest SLS on a Mac Mini, which is behind my Draytek 2820vn router. I have 3 Mac clients (all 10.6.6) and 3 OSX devices. I primarily want to share address books and both share and sync (between devices) iCal. I want to be able to do this from outside my LAN, so need to run Mobile Access.
I have a static IP address from my ISP, to which my sub-domain (e.g. network.mydomain.com) points via DNS with my domain registrar.
I seem to have DNS running ok on the server, at least for my LAN (the -checkhostname and dig commands all return the right results). I can get my clients to log on to the network from within the LAN but not get iCal or the address books playing along.
I have enabled port redirection in my router for:
* iCal Server SSL on 8443
* Address Book Server SSL on 8843
* DNS on 53
* Web service on 80
* HTTPS on 443
I prefer to use SSL for maximum security (though am not sure if I also need to open up the non-SSL ports for these services).
So my questions are:
1. Do I need to redirect any other ports?
2. Do I need a reverse DNS with my ISP (i.e. external to my LAN), for the services I am wanting to run?
3. Do I have to enter the static IP address of the SLS in my router as the primary DNS, with my external DNS as the secondary? (I have done this.)
4. How should I configure the firewall on SLS, given its location behind the Draytek? I want a very secure set-up.
5. Does anyone have any other pointers on getting everything to work with this particular arrangement?
Many thanks for any expert feedback. Please note that I'm pretty Mac-proficient for a amateur, but have never set up a server before, so have a limited grasp of the lingo and things like command line.
Many thanks.* iCal Server SSL on 8443
* Address Book Server SSL on 8843
* DNS on 53
Close that DNS port. You don't want to be fielding in-bound DNS translations.
* Web service on 80
Unless you're planning to serve web sites, close that.
* HTTPS on 443
Ibid.
I prefer to use SSL for maximum security (though am not sure if I also need to open up the non-SSL ports for these services).
[What IP ports need to be opened|http://support.apple.com/kb/ts1629] depends on what services are required, and whether or not you're using a VPN.
1. Do I need to redirect any other ports?
That's one only you can answer, as it is dependent on what you want to do here.
A different question that you want to consider for cases such as this is "how can I close more ports?".
The usual answer is via VPN.
One of many other answers can include a firewall with DMZ capabilities, and a network where you park the server in its own network jail. (A DMZ is a two-firewall firewall box; where you can have an untrusted WAN network, a slightly trusted but still restricted DMZ, and a more trusted internal LAN.)
2. Do I need a reverse DNS with my ISP (i.e. external to my LAN), for the services I am wanting to run?
For secure services, you'll want reverse DNS. That can include ssl services, though (with control over your clients and the boxes that are attempting to connect your LAN) it's not critical.
Reverse DNS is (far) more central to SMTP services, and to ecommerce, and to any cases where you don't control the remote clients, and where the clients are thus dependent on your forward and reverse DNS, and your certificates matching your DNS.
You need LAN-based DNS with Snow Leopard Server, either on the server or with another DNS server on your LAN. [Here is how to set up LAN DNS|http://labs.hoffmanlabs.com/node/1436]
Your ISP will not typically be in a position to provide DNS translations for the private address space. (That's shared and non-routed IP address space, so your ISP would needs to set up DNS for you.)
3. Do I have to enter the static IP address of the SLS in my router as the primary DNS, with my external DNS as the secondary? (I have done this.)
I don't run hosts as gateways. That's more work, and it's less secure.
4. How should I configure the firewall on SLS, given its location behind the Draytek? I want a very secure set-up.
There's no direct answer for that, and there are many different network designs and many different degrees of risk aversion and different degrees of budgets. For some environments, I run locked down. For others, not so much.
5. Does anyone have any other pointers on getting everything to work with this particular arrangement?
[Here is how to set up LAN DNS|http://labs.hoffmanlabs.com/node/1436], and [here is the public-facing DNS set-up|http://labs.hoffmanlabs.com/node/1594] and [here is a quick intro to networking pieces and parts|http://labs.hoffmanlabs.com/node/275]. -
Could somebody explain to me how to set up a VPN on my iMac and access it on iPhone and computer?
I'm mainly using it to bypass an internet block. Could you explain in detail how to set up a vpn that will also work on iPhone? Do you have any recommended applications for me to install? Thank you
To run a public VPN server behind an NAT gateway, you need to do the following:
1. Give the gateway either a static external address or a dynamic DNS name. The latter must be a DNS record on a public DNS registrar, not on the server itself. Also in the latter case, you must run a background process to keep the DNS record up to date when your IP address changes.
2. Give the VPN server a static address on the local network, and a hostname that is not in the top-level domain "local" (which is reserved for Bonjour.)
3. Forward external UDP ports 500, 1701, and 4500 (for L2TP) and TCP port 1723 (for PPTP) to the corresponding ports on the VPN server.
If your router is an Apple device, select the Network tab in AirPort Utility and click Network Options. In the sheet that opens, check the box marked
Allow incoming IPSec authentication
if it's not already checked, and save the change.
With a third-party router, there may be a similar setting.
4. Configure any firewall in use to pass this traffic.
5. Each client must have an address on a netblock that doesn't overlap the one assigned by the VPN endpoint. For example, if the endpoint assigns addresses in the 10.0.0.0/24 range, and the client has an address on a local network in the 10.0.1.0/24 range, that's OK, but if the local network is 10.0.1.0/16, there will be a conflict. To lessen the chance of such conflicts, it's best to assign addresses in a random sub-block of 10.0.0.0./0 with a 24-bit netmask.
6. "Back to My Mac" on the server is incompatible with the VPN service.
If the server is directly connected to the Internet, see this blog post. -
How to set up a mail server with a private DNS and relay over a public mail
How to set up the mail server that we can send and pick up emails inside and outside?
Our private network has the DNS name dnsname1.private.
We have our privat DNS Server and he can forward requests to outside over our router.
Our public emails are hosted by an internet provider. This dns name is dnsname2.com and dnsname2.org.
How we have to set up our mail server that we can pick up our emails from our public dnsname2.com?
And when we write an email how we have to set up it that the dnsname is dansname2.com and not dnsname1.private?If you want to move your mailservice to your own (internal) server, start by making sure you can recieve traffic on port TCP 25 (SMTP). Some ISPs blocks this port, especially on "non business" connections.
Can you send mail from your LAN directly to where your mail is hosted using port 25 TCP or do you have to relay via your ISP?
You have a static public IP? -
How To Set Up Mountain Lion Server/Point DNS to Mac Mini Server
Hello, First of all I have no experience with setting up servers whatsoever. Below is what I have
- Mac Mini with Mountain Lion Server
- Time Capsule as my router
- Comcast as my service provider
My goal is to set up my MacMini as a sharepoint for files and other data with my other partners.
- I have purchased a domaine name from NetworkSolutions. Does this mean that they are my DNS hosting as well? Not really sure. My biggest question is how to point my DNS to my mac mini server correctly.
1. How do you point the DNS to my mac mini server.
2. I've read somewhere to use the IP address from my mac mini server. The only IP address I see is from my Time Capsule (router). I know what my public IP adress is but I am not sure if that's the one to use. I think once I figure this DNS thing I can figure out the rest.
Thanks - Need lots of help.Here's a detailed write-up on setting up internal (private) DNS on OS X Server, and no, you're probably not going to be setting up external DNS on your servers. Your public DNS service will be hosted on and served from the Network Solutions DNS servers.
-
How to set up DNS behind a NAT router...
I am trying to configure DNS in Panther Server as the SOA for my domains and as a LAN name server. I've read several explainations about setting up DNS including technical document 106853 "How to set up DNS in a NAT environment" which says:
Note: For Mac OS X Server 10.3 or later, you should use the Server Admin
application to configure DNS and NAT. Please see the Network Services
Administration Guide for additional information.
Seeing how picky BIND is, this sounds like a good idea, except I can't configure views like that.
Questions:
1) What happens if I create an A record in my main domain for newmac.mydomain.com-->10.0.1.2? People outside the LAN can't get to it, right?
2) Can I create really simple names for the LAN like newmac-->10.0.1.2?
Thanks!You can use "system-config-network" command to configure your DNS configuration.
-
Things have just kind of escalated. We started with the ipad and she really liked it. Then we were given an itv and it worked so nicely with the ipad, that we decided to get her an iphone. We've been buying music, tv shows, movies, taking photos, looking at them on the tv using photostream. But now I'm getting an iphone and plan to by a macbook or mac mini some time soon, and I'm wondering how I can setup my own account but still have all this really nice seamless sharing across devices. If I buy an album on my phone, I'd like to be able to play it on the itv (which is setup with my wifes account). And so forth.
I hope I've explained my concern and someone can point out how to set things up so that things remain as seamless and easy as they are now.
Thanks.Have a look here...
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
SHARING iTunes MUSIC
http://macmost.com/five-ways-to-share-music-in-itunes.html
Also... Create your Own Apple ID for Your iPhone...
It should be Noted that anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622
And... Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
See Here for > How to Use Multiple iDevices with One Computer
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha -
Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks
search google for "iphone remove picture from contact"
Maybe you are looking for
-
Hi experts, I have the field 0fiscyear in my dso and also in the cube. But when creating transformation the field 0fiscyear is present in the dso but not in the cube. So that i am unable to create transformation for 0fiscyear.Anyone please explain me
-
Ipod no longer being recognized by my computer after downloading itune10.2
My iPod 4 - 64 was syncing and fully functional with iTunes version 10.1. The iTunes application suggested I upgrade to version 10.2. While upgrading my computer to iTunes version 10.2, the iTunes install application crashed. I re-downloaded the inst
-
I run win7 64x pro. This is a restatment of problem I posted yesterday I have a hard time believing I'm the first to ever have this problem which is as follows: I used CC Cleaner because of FunMoods, which is the onlt thing I have found that removes
-
How To Buy Flash Media Enterprise Server
Hello, How can we purchase FMES 4 Licenses? Our startup urgently needs it Adobe representatives are not getting back to us Andrey
-
ViewObjectImpl and db connection question
I will be populating the ViewObjectImpl's RowSet from a web service. For simplicity, I create the ViewObjectImpl from an SQL query. There is no Entity Object involved. My question is if I remove the SQL statement from the View.xml file, will the View