How to set JVM max memory setting in JBoss?

We have an old deployment of LiveCycle 7.2 running on Windows 2003 / JBoss.  The max memory is reported as 508mb on the JBoss Management Console.   Anyone have any idea how to change this value.   I tried modifying the jvm.cfg file as well as run.conf in JBoss and modify JAVA_OPTS but it didn't seem to make a difference. 

Seems its in the Windows registry at
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\JBoss for Adobe LiveCycle\Parameters

Similar Messages

  • How to change JVM max memory size in R3 ?

    Hi, I want to change JVM parameters in R3. Can I do that by em console?

    Seems its in the Windows registry at
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\JBoss for Adobe LiveCycle\Parameters

  • How to Determine Safe Max Memory Limit?

    From what I understand, the amount of memory available to your AIR game on a device will vary depending on how many other apps the user is running, the type of device, etc. 
    So with this in mind, how does one define a safe max memory limit for a given device? What percentage of a device's total RAM can we assume we have access to? 
    Here are the iOS RAM Specs
    iPod (4th Gen): 128Mb.
    iPad 1: 256 MB
    iPad 2, iPod Touch (5th Gen): 512 MB
    iPad3: 1 GB 
    I already have highly optimized texture atlases using PVRTC ATF for best use of memory, but if you've ever worked with a passionate creative department, you'll know they always want more. I need to be able to tell them exactly how many spritesheets they have to work with for a given device - how would I do this? 
    NOTE: iPhones/iPod Touches/iPads all have a Unified Memory Architecture which mean that both the CPU and GPU share system memory, which means there is no dedicated GPU GRAM on these devices. So the RAM listed above, I assume, is shared by both the game logic and the GPU.

    Update, I've found an Objective C post on Stack Overflow that answers this question
    Here are the (rough) max memory limits to expect before an out-of-memory crash will occur:
    iPad1: 127MB/256MB (crash amount/total amount)
    iPad2: 275MB/512MB
    iPad3: 645MB/1024MB
    iPhone4: 325MB/512MB
    Note that max memory limit will vary depending on how many apps a user is running, but these figures are a good rough guide. See the Stack Overflow post for more details.

  • How to check JVM used memory in code?

    Hello,
    In my code I want to check JVM used memory and dump to a log file. Is any way to do that?
    Thx a lot!
    SG

    Ok, you've been a forum member for how long? Anyway, look at the javadocs:
    http://java.sun.com/j2se/1.4.2/docs/api/
    See the Runtime class.

  • How to increase jvm heap memory

    hello all,
    we r facing "outofmemory" exception. could any one kindly help us in increasing the jvm's memory in runtime.
    thanks alot
    raghu

    use java with -Xms and -Xmx options.
    see http://java.sun.com/j2se/1.4/docs/tooldocs/windows/java.html
    nk

  • Sql server is using memory more then there max memory setting?

    Hi All,
    today i have faced the different issue..........
    we have one SQl server 2008 prod server... it have memory issue actually  total server memory is 8GB and we have allocated the 6 GB to SQL server,we checked the server no open trans and dont have running jobs also,one database is using the memory high(no
    open trans)... but Sql server has used 6.5 GB (6 GB) and total server used memory is reached to 7.89 GB.
    Please tell me how to find the most costly query in particular database wise and sql server internally behavior ?
    how to troubleshot the  above issue?
    please post the your valuable answers ASAP...
    Thanks,
    RAM

    Please refer to what Olaf said briefly.Buffer pool in SQL server only caters to memory requests which requires pages <8 KB . Almost all requests are satisfies by buffer pool and generally request for memory is small and so buffer pool satisfies the requests.
    However there are some direct memory allocation by windows API which is done by windows for requests which  requires memory greater than 8 KB. This memory wont come from buffer pool and this would be counted in memory utilized by SQL server. SQL
    CLR,XML, linked Server, all takes memory outside buffer pool in SQL Server 2008. This behavior changed in 2012 so my statement only applies to SQL server 2005/2008 and 2008 R2.
    I would run below to check SQL server memory utilization.
    select
    (physical_memory_in_use_kb/1024)Memory_usedby_Sqlserver_MB,
    (locked_page_allocations_kb/1024 )Locked_pages_used_Sqlserver_MB,
    (total_virtual_address_space_kb/1024 )Total_VAS_in_MB,
    process_physical_memory_low,
    process_virtual_memory_low
    from sys. dm_os_process_memory
    I am sure you must be using some features mentioned above.You were worried that even though there is no query running on SQL server it has still holded up the memory. This is default behavior and this is how memory management in SQL Server works. It will
    not release memory untill SQLOS asks it to do so which is told by windows OS thorugh some flag that it is facing memory pressure.
    Please read below for more details on memory. There is section to test whether system is facing memory crunch please read that as well.
    http://social.technet.microsoft.com/wiki/contents/articles/22316.sql-server-memory-and-troubleshooting.aspx
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
    My TechNet Wiki Articles

  • Max Memory Settings Not Working (SQL Server 2008 R2)

    I have 12 GB ram in sql server 2008 R2 of 64 bit server (Windows 2008 R2).
    I have set the Max memory setting to 12288 MB Memory setting.
    Still the usage of sql server process is around 14  GB.
    Is Max memory setting not working?
    I have also enabled AWE after all it is 64 bit.
    Thanks

    Problem is that: my OS is halting due to this RAM. I have 16 GB of ram and assigning 12 GB to SQL SERVER and rest is using for OS. Please guide me how to get information about actual memory usage from all sql server processes. like
    all CLR etc 
    Hi,
    Are you also running SSIS/SSAS/SSRS with database engine services. What do you mean by OS is halting ?
    If you want to check whether SQL Server is facing memory crunch please have a look at perfmon counters from
    this link
    Sys.dm_OS_memory_clerks would be DMV helpful in tracking memory utilized by various processes
    I have also enabled AWE after all it is 64 bit. Thanks
    Please note AWE doe snot have any notable affect in 64 bit system.
    Below will tell you memory used by SQLCLR
    select single_pages_kb + multi_pages_kb + virtual_memory_committed_kb from sys.dm_os_memory_clerks where type = 'MEMORYCLERK_SQLCLR'
    Below query will give you memory consumed by various clerk
    SELECT type, SUM(multi_pages_kb)
    FROM sys.dm_os_memory_clerks
    WHERE multi_pages_kb <> 0
    GROUP BY type
    ORDER BY SUM(multi_pages_kb) DESC
    Can you reduce max server memory to 11 G and see if it gives some relief
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • VM Hangs Following Change To Max memory

    Hi,
    Hoping someone can shed some light on this issue. I'm running OEL 5u5 x64 ( installed using OVM ) on Oracle VM 2.2. I've installed the OS with no bother. I've then powered off the VM, and increased the Max Memory setting. The VM will now no longer boot past the image loader.
    Returning the Max Memory setting to it's original value, fixes everything. I've tested this on existing, and new VM's.
    Any ideas?
    Thanks
    John

    OK, fixed this issue. Found a solution in the release notes for Oracle VM Server 2.2.1 ( section 6.24 ).
    However, does anyone know how to make changes to the vm's config file via OVM?

  • How do I set-up my memory amount for max speed for FCP and Motion

    Hey all, I have a Dual 2.3 G5 with (8 Gigs) Ram. I'm working with a new client. I want to set up my memory or whatever else to provide MAXIMUM processing power for FCP and MOTION. Does anyone have any recommended settings. I've maxed-our RAM. My card is (ATI Radeon 9600-128MB of VRAM)
    Is there a setting in FCP that allows more processing power to be applied to that application ?
    Appreciate any replies

    Most of FCP's speed in performing functions is directly related to processor speed. The only way to increase performance would be to use a Mac with faster processors. Performance is also related to data throughput, so if you're working with high data rate video formats, a fast RAID and/or SATA (or eSATA) media storage solution would help.
    The exception to FCP performance is when rendering/processing FX Plugs; they are dependent on the power of the graphics card.
    Motion is mostly dependent on the power of the graphics card.
    There is no way that I'm aware of that you can speed up RAM. Having the extra RAM will just mean that you can successfully work with more applications open at the same time.
    -DH

  • How to I import MAX 4.6 config files into MAX 5.5? Missing Data Neighborhood. Strain gage set up is different.

    I have been trying to import my config file from MAX 4.6 into a new system running MAX 5.5 and daq 9.8.
    The data neighborhood does not appear, however my application sees the information. How can this be remedied? Start over?  I have a lot of inputs and would rather not have to recreate all of them.
    What is the difference between the strain gage settings in MAX 4.6 and MAX 5.5? The selection box for the bridge in 4.6 has a selection for "let niDAQ choose". Seems that is necessary to use the 4.6 config data. Try though I might, the readings in 5.5 do not match those in 4.6.     Is there a work around fo this? I don't want to have to perform an entire system calibration.
    Thanks
    Chris
    Solved!
    Go to Solution.

    Attached JPG's.
    Here is more information regarding the MAX Strain Set Up.
    Attached are screen shots from MAX 4.6 and MAX 5.5. 
    Hardware:  PXI chassis with bridge to a PC.  SCXI-1520 input card.
    Software: Old system:  Windows XP SP2 running MAX 4.6 with niDAQmx 9.0.2,   programming in LabView 2011
                       New system: Windows 7 running MAX 5.5 with niDAQmx 9.8.  Programming in LabView 2013
    5.5:  What is the gage factor?  Is that the mv/v sensitivity of the load cell?
    5.5:  Asks for Gage resistance, easy to look up and I entered the data, 350.
    5.5:  How do I determine the Initial Voltage?
    5.5:  No choice of using V Excitation for scaling
    5.5:  Is Full Bridge I the same as 4.6 Full Bridge?
    5.5:  Requires use of Strain in scale factor
    4.6:  Requires use of Volts in scale factor (flags an error if I try Strain and requests Volts)
    4.6:  Choosing to use Vex for scaling makes readings look similar to 5.5 readings, but still not correct. ie around -79 in 5.5 and around -50 in 4.6 vs. 5.2 without.
    Is there a way to set MAX 5.5 so that it provides the same starin set  up function as 4.6? If so, what is it?
    Thanks,
    Attachments:
    Max 4.6 Strain Set Up.jpg ‏32 KB
    Max 5.5 Strain Setup.jpg ‏23 KB
    MAX 4.6 Strain Scale 2.JPG ‏165 KB

  • Setting higher MAX resolution in CS6: HOW?

    Hi everyone,
    I work in an industry where soon our Photoshop TIF files will require super high resolution for our pixel mapping. Though our files are not that big size wise (2x2 inches max), they tend to be between 10,160 and 50,000 DPI, depending on the print format we need to achieve. My question is:
    On the current version of CS6, I am not able to import older TIF files with resolutions above 10,000 DPI; they automatically reset to the highest default, 9999.999 DPI. I also am unable to create new files above 9999 DPI. The program says I need to pick an amount between 1 and 9999.999 DPI. We have older machines and versions of CS4/5 that allow us any resolution up to 50,000 DPI, no problem.
    Why can't I find any information on how to get my current CS6 version to not only STOP resizing images to 9999.999 DPI, but also how to increase the max resolution allowed? Setting something like this should NOT be this difficult. Did Adobe make CS6 have a high value of 9999? If so, we need to downgrade to an older version because we need this resolution with our newer projects.
    Please help me find a setting or way to allow my CS6 to both read and create files at resolutions over 10,000. Thanks.

    Might this solution work for you in CS6?
    Create a document double the size you need at 5,000 DPI, then reduce by 50% at the end?
    CS6 13.0.6 screen shot:
    I have no idea if this works for you or not.
    Tuna wrote:
    station_two
    I don't want to go back to an older version, but I am shocked that this recent version (CS6), has limitations on the resolution offered…
    I just want to know why new versions have a max pixel setting…
    LOL !       
    The best answer I can give you is because that's what Adobe wants.  Period.
    "I cannot explain the universe to you, I can only describe it."  That's what my astronomy professor used to say at the ETH just over half a century ago. 
    My experience in the last three decades is that Adobe will extremely rarely address such a question, if ever.

  • Possible to set min/max size to a resizable Stage? If so, how?

    Is it possible to set a minimum and maximum size to a resizable Stage? If so, how would this be done? Do I use some kind of onResize event handler or is there some other way?
    Here is a sample code where I have a 500 x 500 px image in a 300 x 300 px scrollable scene that is in a resizable stage. Right now, I am able to resize the stage to any size, but I would like to limit the resizable minimum width and height to 100 x 100 px and limit the resizable maximum width and height to 600 x 600 px.
    import javafx.stage.Stage;
    import javafx.scene.Scene;
    import javafx.scene.control.ScrollView;
    import javafx.scene.control.ScrollBarPolicy;
    import javafx.scene.image.ImageView;
    import javafx.scene.image.Image;
    var scene: Scene;
    Stage {
        resizable: true
        scene: scene = Scene {
            width: 300
            height: 300
            content: ScrollView {
                hbarPolicy: ScrollBarPolicy.ALWAYS
                vbarPolicy: ScrollBarPolicy.ALWAYS
                width: bind scene.width
                height: bind scene.height
                node: ImageView {
                    image: Image { url: "{__DIR__}roses.jpg"}
    }

    Hi, I don't understand how WidgetFX is going to allow me to set min/max size to a resizable Stage. After all, it is a desktop widget platform and I'm not trying to build a desktop widget. None of the demos I've tried use a decorated Stage with platform decorations that can be used to drag and resize the Stage.
    I'm just trying to limit the min/max size of a resizable Stage. If you think WidgetFX will address my problem, I think a better solution is the JavaFX Stage Controller class I found available at http://code.google.com/p/memefx/. However, the JavaFX Stage Controller class still doesn't address the problem I have because it doesn't stop the user from dragging the Stage beyond the size restricted by the min/max height. It only reverts the Stage to the max size after the user already dragged and resized the Stage beyond the max resizable width/height.

  • How to see memory setting of a managed server

    Hello,
    Can anybody explain me how to see Memory settings of a managed server instance in weblogic server using unix box
    Thanks
    Ravi

    Hi,
    The memory setting on the WC_Spaces managed servers can be seen as mentioned below.
    ps -eaf | grep Spaces
    Above command shows something like this at the top of the output:
    /a01/app/oraweb/middle/jrrt-3.1.2-1.6.0/bin/java -jrockit -Xms512m -Xmx1024m -Dweblogic.Name=WC_Spaces1 ...
    Regards
    Sreedhar

  • How to set naming standard that sets max number of words in column name?

    Hi all,
    Is it possible to set naming standard that sets max number of words in colum (or table) name?
    I was looking video (1:08min)
    http://download.oracle.com/otn_hosted_doc/sqldev/UserDefinedDesignRules/UserDefinedDesignRules.html
    And here you can see how rule is triggered.
    "...Name has 2 words; Max permitted - 1".
    Thanks a lot

    Hi,
    you need to create glossary and set it in naming standards for your design.
    This document is still valid - http://www.oracle.com/technetwork/developer-tools/datamodeler/datamodelernamingstandards-167685.pdf
    Naming standard settings are located :
    - DM 3.x - "Preferences>Data Modeler>Naming Standard"
    - DM 4.0 - Design dialog>Settings>Naming Standard
    If you want only check on number of words then glossary can be empty and you can set "Incomplete modifiers" option in that glossary.
    Philip

  • How to set JVM heap?

    Hi,
    I don't know where to set the JVM heap...can anybody give me step by step to set the JVM heap..

    What do you mean by set the heap? Set its size?Yes, what I mean is heap size. I got the problem java.lang.outOfmemory, and try ind the solution. Some of solution said set the heap size but it didn't explain in more detail.
    Look at the arguments to java. (I mean "java" as in
    "java.exe", the JVM executable.)What u mean look at the arguments to java?

Maybe you are looking for