How to set order of data entry in a table?

a simple question, i know, but i cannot seem to find out how to do it...
if i want to enter data in a two column table, how do i force Numbers to move the data entry box in a specified way on "enter", so i want to enter data in a1, b1, a2, b2, a3, b3 etc and want the correct cell is active after hitting enter. in excel, you just highlight the area you want to fill. this doesnt seem to work in numbers. any ideas?
TIA
nicco

i rechecked that, yes, i must have been using enter.
but still 2 keys on opposite sides of the keyboard

Similar Messages

T.code KO88: how to set the document date?

Hi All,
could anyone tell me how to set the document date in the t.code KO88?
Thanks
Gandalf

Hi,
Normally, the system define the posting date based the date when document entered into Financial Accounting or cost accounting. Based on posting date,system will define the posting period and fiscal year.
Posting date can be different from Entry date ( the date date entered into SAP system), where no influence from user, and it can also different from Document date. Document date is the of original document was created.
Hope this will give you clearer overview of dates which are used in system.
Regards,
Irhasni

How to set a change pointer for a perticular table?

Hi,
Please let me know how to set a change pointer for a perticular table.

what do you mean by 'change pointer'? normally this idiom is used for sending ÍDOCs from one system/client/org-unit to another ...
do you generally want to record changes to a specific table? then set parameter rec/client using RZ10 for your instance profiles and restart the instances in order for the parameter to take effect.
set the table to 'record all changes' using SE11.
you might re-consider if the table has a lot of data and is accessed very often for performance-resons.
change protocols can be evaluated using tx, SCU3.

Transport data entries along with table

How can we transport data entries along with table?
Do I need to declare of specific type??
Thank you,
AP

Hi,
If you have created a table maintenance..
You can use SM30..
Press maintain button..
In the menu..Table view -> transport...Then select the entries include them in the CR.
If the transport menu is not enabled..
Go to SE11..
In the table maintenance generator...Choose the radio button which says "Standard recording routine" and then save..
Now the transport menu option will be enabled..
Thanks,
Naren

How can we delete the data in e-fact table.

how can we delete the data in e-fact table.

hii,
You cannot delete the request individually but you can one of the following:
1. Do a selective deletion from the cube. RSA1 -> Cube -> Contents -> selective deletion.
2. Delete all the data in the cube and then reconstruct only the required request ids. This would work only if you have the PSA available for all the requests.
3. Reverse posting is another possibility.
hope it helps,
partha

How to add a new data element for existing table filed(Primary key field)

Hi Experts,
How to add a new data element for existing table field(Primary key field)
For this filed ther is no foreign key relation ships and even check table.
while activating table it is giving message like below.
can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)
Primary key change not permitted for value table /TC/VENDOR
Check on table /TC/VENDOR resulted in errors
Thanks
Ravi

Hi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob

How to find out when data was deleted from table in oracle and Who deleted that

HI Experts,
Help me for below query:
how to find out when data was deleted from table in oracle and Who deleted that ?
I did that to fidn out some data from dba_tab_modifications, but I m not sure that what timestamp shows, wether it shows for update,insert or delete time ?
SQL> select TABLE_OWNER,TABLE_NAME,INSERTS,UPDATES,DELETES,TIMESTAMP,DROP_SEGMENTS,TRUNCATED from dba_tab_modifications where TABLE_NAME='F9001';
TABLE_OWNER                    TABLE_NAME                        INSERTS    UPDATES    DELETES     TIMESTAMP         DROP_SEGMENTS TRU
PRODCTL                        F9001                                                     1683         46       2171            11-12-13 18:23:39             0                   NO
Audit is enable in my enviroment?
customer is facing the issue and data missing in the table and I told him that yes there is a delete at 11-12-13 18:23:39 in table after seeing the DELETS column and timestamp in dba_tab_modifications, but not sure I am right or not
SQL> show parameter audit
NAME                                 TYPE        VALUE
audit_file_dest                      string      /oracle/admin/pbowe/adump
audit_sys_operations                 boolean     TRUE
audit_syslog_level                   string
audit_trail                          string      DB, EXTENDED
please help
Thanks
Sam

LOGMiner --> Using LogMiner to Analyze Redo Log Files
AUDIT --> Configuring and Administering Auditing

How to load text file data to Oracle Database table?

By using Oracle Forms, how to load text file data to Oracle Database table?

Metalink note 33247.1 explains how to use text_io as suggested by Robin to read the file into a Multi-Row block. However, that article was written for forms 4.5 and uses CREATE_RECORD in a loop. There was another article, 91513.1 describing the more elegant method of 'querying' the file into the block by transactional triggers. Unfortunately this more recent article has disappeared without trace and Oracle deny its existence. I know it existed as I have a printed copy in front of me, and very useful it is too.

How to set a due date in Reminders

Hey guys this had been bugging me for a while so I decided I'd share my findings. This is a pseudo-fix but I think it works for my purposes.
First, the solution:
Open Automator (go into Spotlight and search "Automator")
Create a new service
Under the "Service Receives" dropdown select "none" and make sure it's "every application"
Then in the search bar to the left find "Run AppleScript"
Drag and drop the "Run AppleScript" to the right.
Paste the following code in the "Run AppleScript":
tell application "System Events" to set FrontAppName to name of first process where frontmost is true
if FrontAppName is "Reminders" then
          tell application "Reminders"
                    set newReminder to make new reminder
                    set name of newReminder to "new reminder"
                    set due date of newReminder to current date
          end tell
else
          display dialog "failed to make new reminder!"
end if
Save the service as whatever you'd like, I named mine "new-reminder-with-due-date"
Now close Automator, go to "System Preferences" -> "Keyboard" -> "Shortcuts"
Go to the bottom where it says "Shortcuts..." Add an entry, in the Application say "Reminders"
Then paste the name of the service name you chose earlier (again mine was "new-reminder-with-due-date")
Choose a shortcut to make a new reminder with a due date, For me I chose CMD + SHIFT + n
Close the System Preferences
Now when you use your shortcut in the Reminders app it will create a new Reminder with the due date set as "now"
Change the due date to whatever you want and there you go
Now the explanation. I used references from:
http://www.macstories.net/tutorials/enhancing-reminders-with-applescript-and-mac ros/
http://stackoverflow.com/questions/7570855/where-to-find-what-commands-propertie s-are-available-for-applescript-in-microsof
Basically Reminders happens to have the "due date" property as a scriptable feature. So with AppleScript you can make a new reminder with a due date. I set the date to "Current Date" because I just needed the due date there. You can set the default due date to something else if you'd like but this is at least a solution you can use.
I'm now going to explore how to add a due date to an existing reminder using AppleScript. Hope this helps everyone in the future.

There's a correction to the code. For whatever reason doing it that way still sets it as a "remind me when" parameter. Use the following code instead:
tell application "System Events" to set FrontAppName to name of first process where frontmost is true
if FrontAppName is "Reminders" then
          tell application "Reminders"
                    set duedate to (current date) + (2 * days)
make new reminder with properties {name:"New Reminder", due date:duedate}
          end tell
else
          display dialog "failed to make new reminder!"
end if

Hi i want to know how to set the delivery date as a standard for PO

hi in terms of delivery date how is it possible to set a later date so that I dont need to change it every time I save a purchase order.

Hi,
Your query is not clear. The delivery date is calculated by the system based on the planned delivery period you have entered in material master. Based on this planned delivery time & the PO creation date, system automatically proposes the delivery date, which you need not change.
Pl revert if this does not clear the query.
Regards,
Prashant

How to correctProcess Order confirmation data posted in the previous month

Hi All PP Gurus,
Can anybody tell me the answer of following
How we can correct the process order confirmation data posted in the previous month.

Dear Ashok/Brahmankar,
Actually i am facing the following problem:-
1) If you cancel the confirmation done in the previous month by the tcode CORS, the CO document is posted in the previous period because we cannot change the posting date in CORS. But the previous period is already closed.
Can we change the posting date in CORS manually? Or do you have any other idea?
2) When reading the master data in COR2, I face the error because the status of PO is already set as 'DLV'.
Do we need to read the master data even when the value is changed in KP26?
Thanks,
Narayan

How to set dynamic expiration date in User Task

Hi
I need to set the expiration date of a User Task to a specific date, not a duration. Is it possible to do this?

I have also got a smiliar problem. Does anyone have any further information to how this can be achieved?
I have been able to use the Human Task Wizard screen (<usertask>.task) to hard code the expiration time. Using the Fixed Duration option of days, hours or minutes. I have tried to use the 'By Expression' to do this but have been unable to get it to work. I have tried to select the /task:task/task:systemAttributes/task:expirationDuration or the /task:task/task:systemAttributes/task:expirationDate element within the task workflow xsd but are unsure how to get it to read the date. I have tried to assign a time component to expirationDate and a time period P0DT0H20M to the expirationDuration element.

How to set the Expiration Date for a task which is been assigned explictly.

Hi,
When I assign a task to myself and not work on it for couple of weeks the task is getting released automatically into the original unassigned pool. The TaskActionHandler WSDL is causing that to happen. I don't want a task to be automatically released into the pool when I don't work on it for couple of weeks, how can I make that happen? TaskActionHandler is something which comes with the BPEL so I can't change the way how it behaves. Do I need to set the expiration date or duration explicitly when a task is created?then how do I do that?
If anybody could let me know how to make TaskActionHandler not to release a dehydrated task, I would be glad.
Thanks,
Mythili.

Hi,
Make AUTO RELEASE a restricted action for the task by adding the following line:
<restrictedAction>AUTO RELEASE</restrictedAction>
to the <restrictedActions> tag in the task configuration file.
Works effectively.
Alternatively, you can specifiy the auto release durations on a per task priority basis. There is more on that in the BPEL Dev Guide.
Hth, Sjoerd

How to set the expiration date in content server

Hi all,
I wish to set the expiration date as 3 years later the current date. I have current Date in DocCreateDate but I am not able to set it as DocCreateDate + 3 years.
Can anyone tell me how to set it?
Any help appreciated..
Thanks

You will need to use an idocscript function, most likely in a global rule.
One option could be dateCurrent, which can take a number of days to move it forward or back. See http://docs.oracle.com/cd/E23943_01/doc.1111/e10726/c08_config_ref.htm#i1053616

How to change order header data before SAVE in CRM 2007

Hi,
I want to modify service order header value before saving it, to achieve this :
1) Implemented BADI ORDER_SAVE
2) in the method CHECK_BEFORE_SAVE, read order details by using FM CRM_ORDER_READ and done all validations.
3) Now i want modify one field value. how to do that ?
i came to know that by using FM CRM_ORDER_MAINTAIN or CRM_ORDERADM_H_MAINTAIN_OW data can be update/modify.
Is this right ? what are the parameters i need to pass and exactly in which method i have use this FM.
I want to pass the value in CRMT_ORDERADM_H_WRK(ET_ORDERADM_H) structure i.e. only for one filed.
Please let me know how it can be done.
Thanks
Bhanu

Hi,
I am using following code, please correct if it is wrong.
DATA : IS_ORDERADM_H_COM TYPE CRMT_ORDERADM_H_COM,
           CT_ORDERADM_H TYPE CRMT_ORDERADM_H_COMT,
           IT_INPUT_FIELDS    TYPE CRMT_INPUT_FIELD_TAB,
           WA_INPUT_FIELDS    TYPE CRMT_INPUT_FIELD,
           IT_FIELD_NAMES     TYPE CRMT_INPUT_FIELD_NAMES_TAB,
           WA_FIELD_NAMES     TYPE CRMT_INPUT_FIELD_NAMES,
           IT_SERVICE_H       TYPE CRMT_SERVICE_H_COMT,
           WA_SERVICE_H       TYPE CRMT_SERVICE_H_COM.
After reading order header data from "'CRM_ORDER_READ", pass header data to below structure
    MOVE-CORRESPONDING EW_ORDERADM_H TO IS_ORDERADM_H_COM.
   IS_ORDERADM_H_COM-ZZFLD00000Y = '123456'. <== want to save value in this field created on service header screen by using AET
    APPEND IS_ORDERADM_H_COM TO CT_ORDERADM_H.
    WA_SERVICE_H-REF_KIND = 'A'.
    WA_SERVICE_H-REF_GUID = EW_ORDERADM_H-GUID.
    WA_SERVICE_H-MODE     = 'B'.
    APPEND WA_SERVICE_H TO IT_SERVICE_H.
    WA_INPUT_FIELDS-REF_GUID = EW_ORDERADM_H-GUID.
    WA_INPUT_FIELDS-REF_KIND    = 'A'.
    WA_INPUT_FIELDS-OBJECTNAME = 'ORDERADM_H'. <= Is this right ?
   WA_INPUT_FIELDS-LOGICAL_KEY = ? what is nothing but logical key
    WA_FIELD_NAMES-FIELDNAME = 'ZZFLD00000Y'.
    WA_FIELD_NAMES-CHANGEABLE = 'X'.
    APPEND WA_FIELD_NAMES TO IT_FIELD_NAMES.
    WA_INPUT_FIELDS-FIELD_NAMES = IT_FIELD_NAMES.
    APPEND WA_INPUT_FIELDS TO IT_INPUT_FIELDS.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
    EXPORTING
   IT_SERVICE_H                  = IT_SERVICE_H <= is this required ?
    CHANGING
       CT_ORDERADM_H              = CT_ORDERADM_H
      CT_INPUT_FIELDS                = IT_FIELD_NAMES
     EXCEPTIONS
       ERROR_OCCURRED                = 1
       DOCUMENT_LOCKED               = 2
       NO_CHANGE_ALLOWED             = 3
       NO_AUTHORITY                  = 4
       OTHERS                        = 5.
    IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
awaiting for your replies
Thanks
Bhanu
Edited by: Bhanupracash on Apr 6, 2011 2:14 PM

How to set order of data entry in a table?

Similar Messages

Maybe you are looking for