How to set queue name thru JCD

Hi All,
I have a scenario where depending on Input message type tag I have to send message to respective queue.
Please advise me on this if any body have idea / worked on it.
Thanks in advance.

Then remember to add a "dummy" queue to your Connectivity Map, as you can't left it unspecified. Usually connect it to a "qDummy" or whatever, which in reality is never used, but CM always needs one for configuration or your deployment will fail.

Similar Messages

How to set queue names dynamically for MQ Adapter - SAP XI

Hi Friends
I have a scenario where I should send a message to multiple queues ( more like broadcasting ) using a single communication channel of MQ Adapter. The scenario is like this
1. If the message content contains value '111' then message should go into Queue A, Queue B, Queue C
2. If the message content contains value '222' then message should go into Queue A, Queue B
I will store the content values inside a table ( value and queue names ) and can pick it up inside BPM but want to know how to change the queue name property of MQ series adapter. I will do this inside a loop so the message can be sent to multiple queue names but want to know how to change the queue name property of receiver communciation channel.
I appreciate the help in providing the answer.
thanks
Kannan

Amaresh
Thanks for your answer but my question is specifically targeted towards MQ adapter and the queue name which has to be dynamically changed. I can do the dynamic changes for file adapters but want to know how to change the queue names in message mapping or inside BPM.
regards
Kannan

Set Queue name dynamically in MQ adapter

Hi,
Kindly suggest, how to set Queue name dynamically in Mq adapter.

Hi Ajay,
Thanks for your response.
Below mentioned property value works fine for JMS adapter.
Am looking for the property name of MQ adapter.
Tried to set the queue name to the property jca.mq.ISpec.EnqueueMsgToQ and failed.
Could you please provide the property name for MQ adapter

Can someone tell me how to set my name so when I send a text it shows up instead of my phone number

Can someone tell me how to set my name so when I send a text it shows up instead of my phone number

You can't do that. Only the sending number is transmitted by the carrier with an SMS message. If the recipient has you in their address book, with most smart phones and some others, the name will display, but that's a function of the phone on the receiving end.

How to set dynamic name of the mail attachment according to source file ?

Hi,gurus:
Our scenario is like below:
Sending files from an FTP server to another FTP server without using the integraiton repositary,and the file name is not changed .Now, we want to also send the file to some with by mail adapter.The scenario now works by using two business services in receiver determination.But the name of the attachment is "untitled.xml".We know how to set the file name staticly,but how to set the name dynamicly according to the source file name ?
I have checked miachel's blog "XI: Dynamic name in the mail attachment - pseudo "variable substitution"(/people/michal.krawczyk2/blog/2006/02/23/xi-dynamic-name-in-the-mail-attachment--pseudo-variable-substitution),but how can I get the source file name?
And another question:Must we restart the adapter or j2ee engine to make the user defined module work?

Hi,
>>>but how can I get the source file name?
form dynamicconfiguration (ASMA)
>>>And another question:Must we restart the adapter or j2ee engine to make the user defined module work?
no need for a restart
Regards,
Michal Krawczyk

How to set group name as default value in People Picker in Infopath 2010

How to set group name (shareoint Groupname) as default value in People Picker in Infopath 2010

Under the Developer tab in Infopath you can manage Loading Events, unfortunetly i dont have Visual Studio on this PC so i cant laborate, but i believe it's rather simple to figure out.
Edit: Found a easier way, through Data > Default Values.

How to set the name for an 'unknown' file extension?

Specifics:
I have various file extensions that are recognized by my mac. I would like to know how to create a list of applications that can open it so I do not get a 'There is no Default Application to open this file' error. I would also like to be able to give these file extensions names recognized by the mac.
Just like .txt is a "Textedit Document" and .html is a "HTML Document," I'd like to be able to change the name and assosication of a file and give it its own .icns if possible.
As for the default applications, I know how to set a default application. However, if a mac does not recognize a file extension, adding a new default application to run the file wil actually erase the old one, which is a big pain, especially when your file can be opened with ANY text editor.
I understand that this may involve hacking into the operating system's databases, but if anyone can help, it would be greatly appreciated.

Hi Timo,
My jdev version is 10.1.3.3.0, this is for R12. By PR i mean to say process request and PFR process form request in the controller.
In the Process request of the controller, i am finding the checkbox bean and assigning the firepartialaction for it.
Later in the process form request for the fired event, i am trying to handle the rendered property of the messagetextinput. Is this a right approach?
my code below
public void processRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
super.processRequest(oapagecontext, oawebbean);
OAApplicationModule oaapplicationmodule = oapagecontext.getApplicationModule(oawebbean);
OAMessageCheckBoxBean oamessagecheckboxbean = (OAMessageCheckBoxBean)oawebbean.findChildRecursive("X_FLAG");
if(oamessagecheckboxbean != null)
oapagecontext.writeDiagnostics(this, "Message check box Bean found:", 1);
FirePartialAction firepartialaction = new FirePartialAction("change");
oamessagecheckboxbean.setAttributeValue(PRIMARY_CLIENT_ACTION_ATTR, firepartialaction);
oamessagecheckboxbean.setFireActionForSubmit("change", null, null, true);
oapagecontext.writeDiagnostics(this, "setting fire event", 1);
public void processFormRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
super.processFormRequest(oapagecontext, oawebbean);
oapagecontext.writeDiagnostics(this, "Inside Process Form Request", 1);
if("change".equals(oapagecontext.getParameter(OAWebBeanConstants.EVENT_PARAM)))
OAMessageTextInputBean bean = (OAMessageTextInputBean)oawebbean.findChildRecursive("X_NUMBER");
if(bean!=null){
bean.setRendered(Boolean.TRUE);}
Thanks,
Malar

How to set Alias name for URL or change URL..

Hi:
I am using Apache Tomcat as web server, it contains multiple web applications.
Url for one of this application is, e.g. http://localhost:8080/myapplication. This particular url work fine.
But i want to use only mypage word instead of all the above url.
So how to set or map this?
Thank You,
Anup Desai.

Thank you.
I tried to set the displayname (using setPersonal function)
Still its not working.
I feel it is because during authentication we give the login name (which is taken as the display name).
Is there any way to change without touching configuration level properties in exchange server 2007.
thanks in advance

How to set Workstation Name on Solaris 10?

Hi.
I have problems with setting workstation name.
I tryed to do it with Management Console, but system crashed, because there was missmatch between the name in few files. So I installed Solaris 10 again.
How to change workstation name?
Thank you.

Thank you.
There are two /etc/hostname files, they are empty: hostname and hostname6.
/etc/hosts has what I need to change.
I was unable to find /etc/nodename.
Will it work, if I'll change only /etc/hosts and make "hostname <new hostname>"?
In previous time when my system crashed, I changed: /etc/hosts, but it didn't work.

How to set column names when not using object of row data in constructer

hello i am using JTable constructer as
public JTable(int numRows,
int numColumns)
can i set column names for the columns .How?

hi,
sure you can: Create a subclass of DefaultTableModel and overwrite the method public String getColumnName(int) which returns the column name of a specific column. Then use this subclass as the data model for the table.
best regards, Michael

JList: how a set a "name" and "value" for a element

my JList
DefaultListModel listMBuddy;
JList listBuddy;
listMBuddy = new DefaultListModel();
listBuddy = new JList(listMBuddy);
listMBuddy.insertElementAt("buddy name 1", listMBuddy.size());
listMBuddy.insertElementAt("buddy name 2", listMBuddy.size());
listMBuddy.insertElementAt("buddy name 3", listMBuddy.size());a string "buddy name 1" will be show in JList, it is like a name of element.
how i set value for "buddy name 1"? like html
<select>
<option value="5">buddy name 1</option>
<option value="7">buddy name 2</option>
<option value="2">buddy name 3</option>
</select>
thanks

You have to write your own renderer.
example:
public class MyListsRenderer extends JPanel implements ListCellRenderer {
     JTextArea t;
     private LinkedHashMap<Integer, String> departmentsList;
     private LinkedHashMap<Integer, Boolean> checkedList;
     public MyListsRenderer(int tabSize) {
          t = new JTextArea();
          t.setTabSize(tabSize);
     public Component getListCellRendererComponent(JList list, Object value,
               int index, boolean isSelected, boolean cellHasFocus) {
          Integer id = (Integer) value;
          // you need to create class that get an id (value) and return name
          //this is my example:
          String name = Contacts.getInstance().getContacts().get(
                    (Integer) value);
          t.setText(name);//this is the text in the list row
          add(t);
          return this;
}

Java Callout - how to set Sender Name by InstanceName

I have a following code on Java Callout executed on Listening Channel:
import oracle.tip.b2b.message.InstanceMessage;
import oracle.tip.b2b.model.instance.Instancemessage;
// some other imports //
public class GetPartner implements Callout {
public void execute(CalloutContext calloutContext, List input,
List output) throws CalloutDomainException,
CalloutSystemException {
Logger log = Logger.getLogger(TransportCallout.class.getName());
DiagnosticService.log("MKRTransportCallout: Init");
try {
log.setLevel(Level.INFO);
CalloutMessage message =
(CalloutMessage)input.get(0);
Instancemessage inst = new Instancemessage();
InstanceMessage instance = new InstanceMessage(inst);
String name = instance.getSenderId();
String name2 = instance.getSenderName();
log.info("SENDER ID FROM JAVA CALL " + name);
log.info("SENDER NAME FROM JAVA CALL " + name2);
Both logged values are null.
My question is - how to connect CalloutMessage variable with Instancemessage variable via Java code?
My variable "inst" is null, because the context from variable "message" is not related with it - there is no connection between CalloutMessage and Instancemessage. How to set connection like this?

just a short addition. At the moment i use the following code to generate a MimeMessage:
try
            // Get session
            Session session = Session.getDefaultInstance(MailQueue.props, null);
            // Define message
            this.message = new MimeMessage(session);
            message.setFrom(new InternetAddress(from));
            message.setRecipients(Message.RecipientType.TO, InternetAddress.parse(to, false));
            message.setSubject(subject);
            // pass the mail content and set the Mime Typ
            message.setContent(msg, MimeTyp);
        catch (MessagingException me)
        }

How to set Queue size in JBoss?

Hi all,
I have defined a new queue in JBoss.
I need to set the size of this queue.
How to set the size of a queue in jboss?..... Which XML file should be modfied for this?
Please help me

Yes You changed session timeout for jmx-console but not your application. I assume You wanted for your app. go: jboss-4.0.2\server\default\deploy\jbossweb-tomcat55.sar\conf\web.xml

How to set the name of the spool's record in report

Hello everyone:
    I have just met a problem in setting a name of a spool record in report.
   Does anyone have an idea?
Thanks for your help...

Hello everyone:
    I have just met a problem in setting a name of a spool record in report.
   Does anyone have an idea?
Thanks for your help...

How to set file name and destination folder without user interaction

how can I set the file name and destination folder to generate a pdf file like "c:\myfolder\document.pdf" in this folder automatically.
Is there a tag in .joboptions ?
Goal: User click print button. In the background a pdf will be generated in e.g. "C:\myfolder\document.pdf".
that`s it.
I know that the query dialog for save as can be turned off. But the file name depends on the application.
Thanks for your help.
TK

Hello,
Please post this in PI forums
Regards, Anil

How to set queue name thru JCD

Similar Messages

Maybe you are looking for