How to set the defined last day of a month

Hi, I'm stuck with something. I want to set the desired last day of month to the calendar. How can I do so?
For example: The last friday of january 2006, the last saturday of june 2005, last monday of december 2012

set the calendar to the last day of the month (getActualMaximum(..))
determine the DAY_OF_WEEK of the above (dow1)
determine the DAY_OF_WEEK you want to set (dow2)
calendar.add(datefield,-dow1+dow2)
if(dow2 > dow1) calendar.add(dateField,-7)

Similar Messages

  • Defining last day of previous month in ABAP

    All,
    I am a BW guy and hardly know ABAP. I have a requirement where I have to calculate last day of previous month and use it in the routines of the transformations.
    I have decided to define the Last day of previous month in Start routine and then use the global variable in Transformations to calculate further.
    The logic that i have used is outlined below.
             Define G_DATE in global declaration for further use in Transformations.
    In the Routine section,
            Assign G_DATE to SY-DATUM
            G_DATE + 6(2) = '01' (Replace last to field of date with '01' to establish first day of the current month)
            G_DATE = G_DATAE - 1 (To get to last day of previous month)
    My dilemma is to implement this in ABAP in Start routine of transformations. Please include the exact ABAP code that would be needed in Declarations and Routine section.
    Thanks in advance.

    Hi..,
    Go with the function module: LAST_DAY_OF_MONTHS
    So, Just determine the last month from the sy-datum and then use above function module and pick the last date of the month.
    Thanks,
    Naveen Inuganti.

  • How to create appointment occurs last day of each month

    Hi Preston,
    I am trying to create a monthly recurring appointment occurs on last day of every month in .Net. E.g. start at May 31, 2010 end at May 31 2011 every month.
    I specified the frequency as monthly, byMonthDay[0] = (sbyte)31. But this only generates the instances on those months contain the 31th day. My question is how to also create instances on 30th day for those months don't contain the 31th day.
    Thanks,
    John

    The recurrence rule logic is patterned after the recurrence
    logic in iCalendar (http://www.ietf.org/rfc/rfc2445.txt)
    If you have questions, first look there. Then look at the
    schema itself.
    In the schema the definition of DayOfMonth will handle
    negative numbers:
    <xs:simpleType name="DayOfMonth">
    <xs:restriction base="xs:byte">
    <xs:minInclusive value="-31"/>
    <xs:maxInclusive value="31"/>
    </xs:restriction>
    </xs:simpleType>
    <xs:complexType name="DayOfMonthList">
    <xs:sequence>
    <xs:element name="day" type="tns:DayOfMonth" minOccurs="0"
    maxOccurs="unbounded"/>
    </xs:sequence>
    </xs:complexType>
    So, the last day of the month would be -1. The second
    to last day would be -2 and so on.
    >>> On Wednesday, May 26, 2010 at 11:56 AM, Johnny
    77<[email protected]> wrote:
    > Hi Preston,
    >
    > I am trying to create a monthly recurring appointment occurs on last
    > day of every month in .Net. E.g. start at May 31, 2010 end at May 31
    > 2011 every month.
    >
    > I specified the frequency as monthly, byMonthDay[0] = (sbyte)31. But
    > this only generates the instances on those months contain the 31th day.
    > My question is how to also create instances on 30th day for those months
    > don't contain the 31th day.
    >
    > Thanks,
    > John

  • How to get the number of days in a month?

    hi all
    is there any way to get the number of days in a given month with a given year? for instance, if year is 2004 and the month is July or February, how can i get the number of days? thanks.

    Gee, I don't know ... Maybe this:
    Calendar cal = Calendar.newInstance();
    cal.set(Calendar.YEAR, 2004);
    cal.set(Calendar.MONTH, Calendar.FEBUARY);
    System.out.println("max days in month: " + cal.getActualMaximum(Calendar.DAY_OF_MONTH));
    Do you not bother reading what people have already posted? Read the API docs on the Calendar class.

  • How to find first and last day of previous month?.

    Based on current month, I want to find start and end day of
    previous month.
    For example,
    For august, Start date is July 1st and End date July 31st.
    How can i get first of previous month as start date and last
    day of the previous month as end date?.
    Same way,
    i want to find start date of current month and end date of
    next month.
    Example:
    For august,
    i want to get start date, august 1st and end date : september
    30.
    How can i do this from current date or now().
    I am looking for best and easy way to find start and end
    dates..
    Thanks

    <cfset today = now()>
    <cfset firstOfThisMonth = createDate(year(today),
    month(today), 1)>
    <cfset lastOfNextMonth = dateAdd("d", -1, dateAdd("m", 2,
    firstOfThisMonth))>
    <cfoutput>
    today = #today#<br>
    firstOfThisMonth = #firstOfThisMonth#<br>
    lastOfNextMonth = #lastOfNextMonth#<br>
    </cfoutput>
    Edit - To find the start and end day of previous month, get
    the first of THIS month. Use Subtract 1 month ("m") to get the
    start date. Subtract 1 day ("d") to get the end date.

  • How to set the date picker to display only months?

    I am trying to set the date picker in SSRS 2012 to allow the user just to select the months:  and when I run my store procedure I get a can't convert data type from nvarchar to datetime.  If I don't comment out of the Where Clause, nothing
    is returned if I leave the Where Clause in.
    Alter
    PROCEDURE RollingReportList
    AS
    BEGIN
    SET NOCOUNT
    ON;
    SELECT
    distinct
       [ItemDescription]
    ,[QuantityOrdered]
      ,QuanitityCost
    = [QuantityOrdered]
    * [Price]
    ,Convert(datetime,(CONVERT(CHAR(4),PE.[LastUpdated],107) 
    + '-'
    + (right(CONVERT(CHAR(4),PE.[LastUpdated],112),2)))) 
    as CurrentMonth 
    ,Convert(datetime,(CONVERT(CHAR(3),Datename(MONTH,DATEADD(MONTH,1,PE.LastUpdated)),107) 
    + '-'
    + (right(CONVERT(CHAR(4),PE.[LastUpdated],112),2))))
    as NextMonth
      ,Name
    FROM
    [HQStore].[dbo].[PurchaseOrderEntry]
    as PE
    inner join
    [HQStore].[dbo].[PurchaseOrder]
    as PO
    on  PE.[PurchaseOrderID]
    = PO.[ID]
    inner join
    [HQStore].[dbo].[Store]
    as ST
    on PE.[storeid]=ST.ID
    Where 
    (@Start
    = '01/01/2009'
    and  @Last
    =  '12/31/2010')
    End
    Go
     Exec
    RollingReportList
    Any Help?

    Try the below....
    Where  (@Start = '20090101' and  @Last =  '20101231')
    SELECT FORMAT(getdate(), 'MM')
    02
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • How to get the number of days of a month belonging to a date interval

    Hi, i am getting mad around a problem, i have 2 dates and a month, i wanto to retrieve the number of days belonging to the month that are in the interval.
    eg:
    month january 2011 . begin_date = 11/JAN/2011, END_DATE 30/MAY/2011 result is 21
    month january 2011 . begin_date = 11/DEC/2010, END_DATE 10/JAN/2011 result 10
    month january 2011 .begin_date = 02/FEB/2011 , END_DATE 25/may/2011 result 0
    month january 2011. begin_date = 03/JAN/2011 , END DATE 05/JAN/2011 result 3
    and so on ...
    i appreciate any suggestion
    thank you
    Andrea

    Oh, I didnt see your result.
    SQL> with t as
      2  (select  to_date('11/01/11','dd/mm/yy') from_dt,
      3           to_date('30/05/11','dd/mm/yy') to_dt,
      4           'Jan-11' mnth from dual
      5           union all
      6           select  to_date('11/12/10','dd/mm/yy') from_dt,
      7           to_date('10/01/11','dd/mm/yy') to_dt,
      8           'Jan-11' mnth from dual
      9           union all
    10           select  to_date('02/02/11','dd/mm/yy') from_dt,
    11           to_date('25/05/11','dd/mm/yy') to_dt,
    12           'Jan-11' mnth from dual
    13           union all
    14           select  to_date('03/01/11','dd/mm/yy') from_dt,
    15           to_date('05/01/11','dd/mm/yy') to_dt,
    16           'Jan-11' mnth from dual
    17           )
    18  select from_dt,to_dt,mnth,
    19         greatest(
    20              least(last_day(to_date(mnth,'Mon-yy')),to_dt)
    21              -
    22              greatest(to_date(mnth,'Mon-yy'),from_dt)+1
    23                 ,0) cnt
    24  from t;
    FROM_DT   TO_DT     MNTH          CNT
    11-JAN-11 30-MAY-11 Jan-11         21
    11-DEC-10 10-JAN-11 Jan-11         10
    02-FEB-11 25-MAY-11 Jan-11          0
    03-JAN-11 05-JAN-11 Jan-11          3

  • How to set the value of Day in JSpinner of format DD:HH:mm

    Hi All,
    I am trying to implement a spinner of format day:HH:mm but the problem is that I didn't any function by which I can set some dynamic value in Day (for initial display).
    I can set some value in hour and minute by using
    Date fDate = new Date();
    fDate.setHours(hh_int); // hh_int is some dynamic value
    fDate.setMinutes(mm_int); // mm_int is some dynamic value
    but I didn't get any function like setDay(int_value);
    Please let me know how can I do it.

    Take a look at java.util.Calendar.

  • How do I set a reminder for the last day of every month

    Have I missed something? But how do you set a reminder for the last day of every month to recurr indefinatley in iOS6? Sorry if this is really simple but I just can't seem to work it out. Any help gratefully received.

    Hey Mattye88 not sure if you have seen but actully you can do this, but for some reason you have to use Siri.  If you bring up Siri and say "set a reminder ever 4 weeks from next wednesday to check the gas meter" it will set one and it will work just fine, I have reminders to water a Bonsai every three days and it works fine it just shows as custom repeat on the user interface.  Alas it seems you can not use Siri to set one for the end of the month though which is why I am in this threed.  Still hope it helps you to know how to sort this problem atleast.

  • How to get the last day of a month?

    HI,
    I want to know how to get the last day of a month.
    In my JClient form, I tried to get it by using oracle.sql.Date method, that is:
    lastday=oracle.sql.Date anydate.lastDayOfMonth();
    But it does not work. The result is lastday=anydate.
    Why?
    Stephen

    You can use the Calender class...
    Calendar c = Calendar.getInstance();
    and then something like...
    c.add(c.MONTH, 1);
    int dayOfMonth = c.get(Calender.MONTH);
    c.add(c.DAY_OF_MONTH, - (dayOfMonth-1) );
    other usefull functions are:
    System.out.println(" YEAR : " + c.get(Calendar.YEAR));
    System.out.println(" MONTH : " + c.get(Calendar.MONTH));
    System.out.println(" DAY_OF_MONTH : " + c.get(Calendar.DAY_OF_MONTH));
    System.out.println(" DAY_OF_WEEK : " + c.get(Calendar.DAY_OF_WEEK));
    System.out.println(" DAY_OF_YEAR : " + c.get(Calendar.DAY_OF_YEAR));
    System.out.println(" WEEK_OF_YEAR : " + c.get(Calendar.WEEK_OF_YEAR));
    System.out.println(" WEEK_OF_MONTH : " + c.get(Calendar.WEEK_OF_MONTH));
    System.out.println(" DAY_OF_WEEK_IN_MONTH : " + c.get(Calendar.DAY_OF_WEEK_IN_MONTH));
    System.out.println(" HOUR : " + c.get(Calendar.HOUR));
    System.out.println(" AM_PM : " + c.get(Calendar.AM_PM));
    System.out.println(" HOUR_OF_DAY (24-hour): " + c.get(Calendar.HOUR_OF_DAY));
    System.out.println(" MINUTE : " + c.get(Calendar.MINUTE));
    System.out.println(" SECOND : " + c.get(Calendar.SECOND));
    System.out.println();*/

  • How to set the default value of an item type DATE PICKER to the day of yest

    Hi
    How to set the default value of an item type DATE PICKER to the day of yesterday ?
    Thank you very much !
    Christian.

    Hi Christian,
    Have a look at this thread Re: Default the Date Picker to Today
    It covers this issue in detail.
    Regards
    Paul

  • Define event to repeat on the last day of each month?

    (I've searched the forum and can't find this question addressed)
    I want to create a repeating event for the last day of each month. Is this possible?

    Unfortunately Apple does not have an option available that allows you to add an event repeating on the last day of the month. An "OK" way around this would be to repeat on the 1st of every month and send a reminder a day earlier. I know this is less then perfect but the only option currently available. If you happen to find a 3rd party program that allows such integration please don't hesitate to mention it here as I have been looking for this sort of option for quite some time now!

  • How to set the Rman backup parameter.

    Hi,
    Can U guide me how to set the Rman backup path,control file auto backup & others parameter.

    Hi,
    Go through this,
    Show all configurable settings:
    RMAN>SHOW ALL;
    Write disk backups to the /rmanback directory: (%U will be replaced with unique filenames)
    RMAN> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/rmanback/%U';
    Backup using a flash recovery area rather than disk
    RMAN> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT CLEAR;
    Configure RMAN to back up the control file after each backup
    RMAN> CONFIGURE CONTROLFILE AUTOBACKUP ON;
    By default, RMAN automatically names control file backups and stores them in the flashrecovery area.
    To configure RMAN to write control file backups to the /backup directory:( %F will generate a unique filename)
    RMAN> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backup/controlfile%F';
    Ensure that RMAN retains all backups needed to recover the database to any point in time in the last 7 days:
    RMAN> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
    Retain three backups of each datafile:
    RMAN> CONFIGURE RETENTION POLICY TO REDUNDANCY 3;
    Delete backups no longer required by the retention policy:
    RMAN> DELETE OBSOLETE;
    To override the configured retention policy for individual backups - use BACKUP.. KEEP (or CHANGE.. KEEP)
    Configure backups to run in parallel by assigning two sbt channels:
    RMAN> CONFIGURE DEVICE TYPE sbt PARALLELISM 2;
    Reset any CONFIGURE setting to its default by running the command with the CLEAR option
    RMAN> CONFIGURE CHANNEL DEVICE TYPE sbt CLEAR;
    RMAN> CONFIGURE RETENTION POLICY CLEAR;
    Regards,
    oraclekt
    Edited by: oraclekt on Sep 1, 2010 9:58 PM

  • HT4623 Hi!My iPAD lost its charge fast !!I've got an iPAD capacity 57,1GB and it has available 55,1GB ,version 7.0.4 .I'd like to know how long does the battery last when it is 100 % charged.

    Hi!I've just installed the iOS 7.0.4 operating system and the battery lost its charge at an incredibly speed.I'd like to know how long does the battery last if everything is right when it has 100% charge.Thanks!

    I`m `propping` up this thread to to the top of the forums again as it`s been three months and not a single community member or Apple support personnel have replied, which I find discouraging.
    I`ve tried everything - both the iOS device(s) and Apple TV have been upgraded (albeit reluctantly) to the latest versions, since iOS 7 looks like crap compared to iOS 6. Both use the same WiFi network. Bluetooth is set to `off`, as per the online tutorials on the Apple Support page.
    I also tried shutting all of them down, including the router, waiting 30 seconds and turning the router, then the Apple TV then the iOS device on sequentially with 30 seconds in between each, again as per this discussion forum, and still nothing.
    Why can Apple not make a technology, such as AirPlay, work with greater than 10%?
    Any other ideas?
    Come on, people.
    Thanks,
    Doug

  • How to set the report path in a model plugin

    I am trying to figure out how to set the report path in a process model plug-in. I can seem to figure out how to get access to it. It seems like this would be a reasonable thing to do since the plug-ins are for results processing. Does anyone know how to do this? We typically use the Sequential process model but I am trying to keep my plug-in as independent of that as possible. 
    Thanks.
    Solved!
    Go to Solution.

    If I understand, you want your plug-in, when enabled, to alter the settings of any other instances of the NI report plug-in such that their reports share the same directory as your plug-in is configured to use.
    If so, your plug-in can access and modify the settings of all other plug-in instances. All instances are passed to all plug-in entries point in the plugins array sub-property of the ModelConfiguration parameter. You can iterate through this array. Any element of the array with a Base.SequenceFilename equal to "NI_ReportGenerator.seq" is an instance of the NI report plug-in. Its report options are stored in the element under PluginSpecific.Options.
    You can change the report options to what ever you want. Note that the ReportOptions model callback is called from the Initialize model-plugin entry point, so you might want to ensure that your changes are applied after that, so they aren't overwritten. To do that, you could make your changes in the the Initialize entry point of your plug-in, and ensure that your plugin runs last. To make it run last, you could set the FileGlobals.ModelPluginComponentDescription.Default.Base.RunOrder in your plug-in file to a value greater than 0, such as 1.0 (see TestStand Help>>Fundamentals>>Process Model Architecture>>Process Model Plug-in Architecture>>Structure of Plug-in Sequence Files>>Model Plug-in Entry Points>>Order of Entry Point Execution at Run Time).

Maybe you are looking for