How to set-up new Airport Express to extend range of Airport Extreme

Purchased a new Airport Express to use it as a range extender on existing home network with an operating Airport Extreme base station. While I've read instructions, I'm unclear whether the Express needs to be connected by ethernet cable for its initial setup, or can I simply plug it and initialize it wirelessly onto the same household network? (I've tried the latter but without success).

to edex67 and Bob Timmons:
My objective is to extend the wireless range of the Airport Extreme base station wirelessly - so I do appreciate that the Airport Express would needsto be located haflway between the base station and the "dead zone" area.
The suggestion of using a Powerline ethernet connection to the Airport Express has merit (especially as I have one available).
I continue to use OSX 10.6.8 - does this affect my set-up in any way?
My problem had been - and remains - how to configure the Airport Express in range extend mode - I did click these boxes on both the Extreme base station and the Express, however the Express still has flashing amber lights and error codes - one indicating no internet availability on the Airport Express.

Similar Messages

Airport Express to Extend Range of Airport Extreme 802.11 ac???

Hi:
We just installed a new Airport Extreme 802.11 ac. I would like to extend range within the house with our older Airport Express. I plug in the Airport Express (model A1264) 1 m away from the Extreme, but the light just blinks yellow on the Express. When one turns to Airport Utility, the box in the top left (Other Wi-Fi Devices) shows no other discovered options. Is this 802.11 n Express not compatible with my new 802.11 ac extreme, or am I doing something stupid/wrong?
Thanks!

Tried soft and hard reboots on the Express. I now have a slowly flashing yellow light.
But, Airport Utility under the tab "Other Wi-Fi Devices" still lists nothing.
Airport Utility in the main window has a globe with a green dot next to the word "Internet" under it.
There is a vertical line under the globe going to an icon of my brand new Airport Extreme that has a green dot under it and the name of the Airport Extreme.
My iMac is connected to the internet via an ethernet cable (Wi-Fi is off).
This is the same configuration I had with my old Base Station, but for some reason the Airport Express doesn't show up in Airport Utility with my new Airport Extreme as the base station and I have no idea how to use Airport Express as a range extender.
Again, thank you for your advice and help.

I have an airport extreme attached to cable, then one airport express to extend the range. when i try to add an additional airport express to extend range in another area of house, can't get it to work. unility says it has found a new base station

i have an airport extreme attached to cable, then one airport express to extend the range. when i try to add an additional airport express to extend range in another area of house, can't get it to work. utility says it has found a new base station and asks if i want to use it. if i click yes, then the old setup is disabled.

Ok, thanks for clarifying which models you have. Please see the following Apple Support article on how to configure these older base stations for a Wireless Distribution System (WDS).

Original Airport Express to extend range of non-Apple WiFi network

I own one of the original Aiport Express devices in addition to an Actiontec PK5000 modem/router. I would like to use the Airport Express to extend the range of the non-Apple router/wifi network.
I heard it is possible to do this using a direct connection with an ethernet cable. Is this possible?
Thanks

With the AirPort Express (AX) powered up, hold in the reset button for 8-10 seconds and then release. Allow a minute for the AX to restart.
Connect the AX to the Actiontec gateway with the Ethernet cable, which I assume is working correctly.
Open AirPort Utility and click Continue to follow the guided setup to "Create a wireless network". Use the exact same wireless network name, WPA2 Security, and wireless network password as the Actiontec network.
AirPort Utility should recommend "Bridge Mode" for the AX, which is the correct setting.
Once the AX is updated with the new settings, be sure to power cycle the entire network. That means powering everything off, waiting a minute, then powering up the Actiontec first for a minute, then the AX, then each device one at time until everything is powered back up.
If the Actiontec is using standard wireless settings, the network will behave as if it is one large wireless network.

AIRPORT EXPRESS TO EXTEND RANGE OF BT HOMEHUB ( UK )

Hello , Can anyone help me out please ?
I have just switched to BT HOME HUB and would like to use airport express to extend the range . Spent ages with tech support and me trying out different options but had no luck . Does any one know if this is possible and if so please let me know how ?
Thanks
Chris

Is your modem a BT Voyager 2100? If not, then the answer is no.
The AirPort Express (AX) can only extend a wireless network when it is connected to a wireless network using Apple's WDS. Most 3rd party wireless base stations are NOT compatible.

How to use Airport Express to extend range in conjunction with Belkin N Wireless Router

I would like to know how I can extend the range of my Belkin N1 Wireless Router using the the Apple Airport Express? I saw a similar post to this question but the results talk about using this in conjunction with time capsule - I only have a Belkin router and the Airport Express.
If so, can someone help me to find out which settings/configuration I need to set of my Router and Airport Express in order the extend the range of my network.
Thank you in advance for your support.

Thank you for your quick reply. Can you please expand upon how to set up the 'bridge' mode?
I tried connecting the AE via Ethernet from the Belkin router but was not successful in being able to get any additional coverage. I feel like I am missing a vital set of instructions with set-up/configuration details.
Thanks again.

Airport express to extend range

I have airport extreme, and a express to extend wifi range.
I bought another express to extend more. But if I understand express doesn't connect in other express am I right ?
Express show in the airport utility with green light but the wifi doesn't work.
can someone help me ?

If you need to cover a long distance than the first option, using a "static" WDS, is the way you would want to go.
Here are the steps to set it up:
(Note: To facilitate the WDS set up, temporarily connect the remote & relay base stations to the AEBSn by Ethernet during the set up phase, and then, relocate them to the desired locations when complete. Also, jot down the AirPort IDs (MAC addresses) for each of the base stations to be used in the WDS. The AirPort ID and is printed on the label on the bottom/side of the base station.)
Main Base Station Setup - AEBSn
o Click the AirPort status menu in the menu bar and choose the wireless network created by the base station you want to set up as the main base station.
o Open AirPort Utility (located in the Utilities folder in the Applications folder on a Macintosh computer, or in Start > All Programs > AirPort on a computer using Windows).
o Select the main base station, and then, choose Manual Setup from the Base
Station menu.
o Enter the base station password if necessary. If the base station is using the default password of public, you will not be prompted for a password.
o Click Wireless in the toolbar, and then, choose “Participate in a WDS network” from the Wireless Mode pop-up menu. Note: You will need to hold down the Option key in order to get this option on the AEBSn, 802.11n AirPort Express Base Station (AXn), or Time Capsule (TC).
o Click WDS and then, choose “WDS main” from the WDS Mode pop-up menu.
o Select the “Allow wireless clients” checkbox if you want client computer to connect to this base station.
o Click the Add "+" button and enter the AirPort ID of the base station you want to connect to this base station.
o Click Update to send the new settings to the base stations in the WDS.
Remote Base Station Setup - AX#1
o Open AirPort Utility; select the remote base station, and then, choose Manual Setup from the Base Station menu.
o Enter the base station password, if necessary.
o Enter the same network password as the main base station, if necessary.
o Click AirPort in the toolbar, and then, click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and then, choose the same channel as the main base station from the Channel pop-up menu.
o Click WDS and choose “WDS remote” from the pop-up menu.
o Enter the AirPort ID of the main base station in the WDS Main field.
o Click Update to transfer the settings to the base station.
Relay Base Station Setup - AX#2
o Open AirPort Utility; select the relay base station, and then, choose Manual Setup from the Base Station menu.
o Enter the same network password as the main base station, if necessary.
o Click AirPort in the toolbar, and then, click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and then, choose the same channel as the main base station from the Channel pop-up menu.
o Click WDS and choose “WDS relay” from the WDS Mode pop-up menu.
o Enter the AirPort ID of the main base station in the Main AirPort ID field.
o Click the Add "+" button and enter the AirPort ID of the remote base station this relay base station will connect to.
o Click Update to transfer the new WDS settings to the relay and remote base stations.
(ref: Pages 42-46 of "Designing AirPort Networks.)

Why does airport express not extend range?

New airport express recognised OK but there is no extension of range. Why might that be?

Try here > Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations

Connecting two Airport Expresses to extend range, please help!

Hello I have two AX, one which is connected to my broadband modem. I would like to use my 2nd AX to extend the range of my first AX, is there anyway this is possible? I've seen a picture of the opening screen for the Airport Express Setup that there is a box to tick, that allows you to do exactly that, but when I open up my setup, no such option exists for me. Anyhelp would be greatly appreciated. I'm using Mac os 10.4.9 (no leopard, no intel)

Yes that is possible if you configure the 2 AirPort Express (AX) to connect wirelessly using WDS.
KB 107454, Using the AirPort Admin Utility to create a WDS network with multiple base stations

HT3728 after soft resetting how to set a new password to my airport express

after soft resetting the airport exppress how to set a new password to my airport express

Hello, MevanK.
Thank you for the question. You may find this article helpful in changing or creating a password for your AirPort Express.
AirPort Utility 6.x: Password-protect your wireless network
http://support.apple.com/kb/PH5119
Cheers,
Jason H.

How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly

I want to extend my wifi off my Time Capsule with an Airport Experess in a part of my house that has no data cable ran to it. How do I do this?
Thanks

No more meseges.
في ٢٦/٠٨/٢٠١٤، الساعة ٢١:٤٥، كتب Apple Support Communities Updates <[email protected]>:
New discussion activity
Bob Timmons has posted in the AirPort community.
How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly
Assuming that you have the model A1264 or A1392 version of the Express, it must be located where it can receive a strong wireless signal from the Time Capsule to be able to extend it correctly.
A good general location would be a point that is about half way between the Time Capsule and other area that needs more wireless coverage.
You will use AirPort Utility on your computer to configure the Express. An iPhone or iPad could be used as well.
We can provide more help....if you need it....but we'll need to know what version of AirPort Utility that you are using on your computer....or whether you want to use an iPhone or iPad to setup the Express.
https://discussions.apple.com/servlet/JiveServlet/downloadImage/2-26506753-46613 2/AboutAirPortUtility.png
To post a reply, go to the discussion in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

How to set up time capsule with existing network that uses airport express/extreme

I have an existing wirelss network using airport express. I want to upgrade to time capsule and use the A/P express upstairs. I dont want to delete the existing network.

I suggest to use your airport express to extend your wireless network that is created by your new time capsule

HT204371 How to setup Airport Express to extend my network range?

I have an Airport Extreme as main router and want to install an Airport Express to extend the range of my wifi. However it only works when connected through an ethernet cable. How can I setup my Airport Express to work wirelessly and extend the wifi range?

I have a Time Capsule in the basement and my daughter is 3 stories up on her iMac and she complains about speed while online. She is about 40 feet up from me with 3 ceilings in between.
It is a nothing short of a miracle that she can get any signal at all under those conditions.
Found an AirPort Express Base Station (the one that looks like a power bar for Apple laptops) - model # is A1084.
Unfortunately, this older version of the Express does not have the capability to "extend a wireless network" using wireless only.
You need the A1264 version, or the "new" AirPort Express (that looks like a miniature Time Capsule) if you want to try to "extend" using wireless only. In this case, you would want to locate the extending device approximately half the distance between the Time Capsule and her computer.
I can't say that this will do a lot to improve things....it's going to be one of those situations where you won't know if it will work until you try.
(or am I better off trying to run a super long Ethernet cable to her somehow?)
This is by far the best choice in terms of performance. There is no signal loss in a wire. She will be amazed at how well and fast her Mac runs this way.

How do I setup airport express to extend my airport extreme

How do I setup airport express to extend the airport extreme

Unfortunately, you are getting incorrect advice here. Might be a good idea to start a new post, since the original thread is long out of date.
First, please confirm that you have a compatible Express with the AirPort Extreme. This would be either the current A1392 version.....or the previous A1264 version.
Next, we need to confirm "how' you want to extend, since you do not mention this in your post.
Are you planning to "extend" by connecting the AirPort Express to the AirPort Extreme using a permanent, wired Ethernet connection (highly recommended).....or.....are you trying to "extend" by having the Express try to connect wirelessly to the AirPort Extreme?

I acquired an airport express to extend my cable modems wireless signal, BUT having difficulty getting set up.

Having trouble getting set up. I'm trying to set up airport express to extend my existing wireless network, so i can get a better signal for my iPad at the other end of the house. I can get a green light on the airport device , but signal is still weak. How do I tell if apple express has been properly set up. Does the apple express need to be connect via ethernet to my cable modem (either for set up or to operate properly)?

I'm trying to set up airport express to extend my existing wireless network
If you are trying to "extend" using wireless only, Apple's "extend a wireless network" feature is a proprietary design that is designed to only work with other Apple routers.
It would be extremely unlikely that the Express could be configured to "extend" a wireless signal from a 3rd party modem/router or gateway.
More likely, the Express has been set up to "join" the wireless network. It does not provide any additional wireless signal in this type of configuration, which is designed for use with AirPlay.
I can get a green light on the airport device , but signal is still weak. How do I tell if apple express has been properly set up.
If you have a Mac laptop handly, you can perform a quick check to see if the Express is actually "extending" the signal.
Locate the laptop near your main router. Hold down the option key on the Mac and click on the fan shaped AirPort icon at the top of the screen. Look for the BSSID and jot down the least few numbers for identification. The BSSID is actually the AirPort ID of the device to which your Mac is connected at that time.
Now move the laptop close to the AirPort Express and perform the same check, If you see the same BSSID, this confirms that the laptop is still connecting to your main router's wireless signal...and the AirPort Express is not "extending" the wireless signal.
If the Express is "extending", you will of course see a different BSSID when you perform the check.
Post back on your results, so we will know how best to proceed if you want to configure the Express to provide more wireless coverage. It will help if you can provide the make and model number of your "modem", which is likely a combination modem/router or gateway type of device.

How to set-up new Airport Express to extend range of Airport Extreme

Similar Messages

Maybe you are looking for