Setting The Printer For Reverse Or Mirror Image

Hello,
IM trying to create some T-Shirt Transfers, but I Would Like To Know How To Set The Printer For Reverse Or Mirror Image?
Thanks!

click print, go to 'preferences', under the 'finishing' tab, orientation section your choices should be [ ]portrait, [ ]landscape, [ ]MIRROR IMAGE.

Similar Messages

How do I print as a "reverse or mirror image" on the HP Officejet Pro 8600 model # N911a

How do I print as a "reverse or mirror image" on the HP Officejet Pro 8600 model # N911a

I have spent hours figuring out how to print a t-shirt transfer since my new HP printer doesn't seem to allow for mirror image printing (yet my old HP printer easily let me select this feature). Here's what worked for me, using Word 2010:
Create the text and insert any images into the document as you normally would.
Go to Insert / WordArt and chose a style of lettering (I don’t think it matters what you choose since you will be cutting and pasting the data from 1 above). A text box will appear and a new "double-decker" tab will appear at the right (Drawing Tools on top and Format below).
Copy what you created in step 1 and paste it into the text box.
Click on the Format tab (the cursor must be inside the text box for the Format tab to be visible).
Choose Text Effects / 3-D Options and then 3-D Rotation Options. A dialogue box will open. For the X value, enter 180. Do not enter anything for the other values. Your image should have rotated to mirror image.
Click Close and save your document.
You should now be able to print your document as usual.
Good luck!

Can you set the print margins in Preview?

Simple question: Is there a way to set the print margins when printing an image from Preview?
Thanks,
-ME

EagleSongs wrote:
I can set margins in other programs (like Photoshop, Word, Excel, Firefox, Chrome...), but there does not seem to be a setting for margins when printing from Preview. I don't want to resize the image, just get it to print in a certain position on the paper (template form).
In the case of Photoshop, you are placing an image on a canvas and can position the image to suit. Word and Excel have a Page Setup menu that lets you set the margin positions - which know since you have got the output you wanted. There is no Page Setup menu for most, if not all, Apple applications like Preview. Instead parts of the Page Setup menu have been added to the print dialog but margins is not one of them.
EagleSongs wrote:
However, I was trying to find a way to print from Preview and get it to position the image on the page the way I want.
Understood. Unfortunately you don't get that option in Preview. The image will be centred - both horizontal and vertical - based on the paper size and the printer you have selected in the print dialog. You could create a custom paper size with the margins you want to position the image and then use that custom paper in Preview. But your workaround of using Word gives you more control over the positioning of the image.

Printer properties keeps changing 'Mirror Image' option to ON

I have Word 2003 SP3.
My multifunction printer is HP Officejet Pro L7700.
In printer properties - under the 'advanced' tab, I have 'Mirror Image' set
to OFF.
However, if I make a change under the 'features' tab in pinter properties,
the 'Mirror Image' will change to ON, without me wanting it to.
How can I keep this from happening?
Thank you,
Jamie
This question was solved.
View Solution.

Well, I tried this. As soon as i went into printing shortcuts and changed something, the Mirror Print went back to ON again.
Anyone else? Somehow, I believe this started happening when MS Service Pack 3 was installed.

How do I set the print and paper size in iPhoto 5

Can somebody please help. How do you set up iPhoto 5 so that you define both the the size of the print and the photo paper you use?
For example, I wish to print a 4.5cm x 3.5 cm photo on 6x4 (or 15cm x 10cm to keep all the units the same) paper.
I've seen a post saying how to do it in iPhoto 8, but the drop-downs are different.

I do not remember the locations in iPhoto 5 but there are probably three places to mess with
1 - set the paper size
2 - set the print size
3 - set the paper tray for the printer to use that has the paper size that you set in step 1
these may be in the print sequence or under the file menu as page set up (or similar). If these are not obvious try the Help menu
LN

How to Restrict printing the document using IRM for a Single Document?Allow printing for some documents and restrict the printing for particular documents in same document library?

Can we able to Configure the IRM in Document Level in SharePoint Document libraries?
The document library contains multiple document sets , Can we restrict the printing according to document sets? Allow printing for some documents and restrict the printing for particular documents in same document library
Is this possible?Please suggest.

Yes, that can be done. But note that all administrators will have the same right to print, so you need to make sure the users are not administrators. You can include a macro to disable printing, but if the users disable macro, they can print the documents.
Hence, there is no foolproof way to prevent printing documents. If you still need a foolproof security, PDF format provides password based security (viewing doesn't require a password) that can be implemented to prevent the document from printing,
which doesn't require any special scripts and is tough.
You can have a look at the following links:
http://msdn.microsoft.com/en-us/library/office/ms458245(v=office.14).aspx
http://msgroups.net/microsoft.public.word.docmanagement/prevent-printing-of-docum/91353
http://www.go4sharepoint.com/Forum/prevent-printing-saving-documents-10150.aspx
The following link explains about the security features in PDF. This is for information purpose only and not for promotion of any products:
http://www.pdflib.com/knowledge-base/pdf-security/
Balaji Kundalam

How do I set the print area in Numbers?

How do I set the print area in Numbers?

Hi Macuser4ever,
Numbers does not have the 'Set Print Area' feature. Numbers is designed around several tables, each with a purpose. For example, Input Table, Big Database, Intermediate Calculations Table (all of which you may not need to print) and a final Summary (Presentation) Table that you may wish to print. The Summary Table can be on its own Sheet. Arrange objects (Summary Table, Charts [graphs] and whatever) on one Sheet and print only that Sheet.
If you are using Numbers 3.x (Layout View and Print View missing) try this User Tip:
Print Layout Guide for Mac Numbers 3.2
Regards,
Ian.

Setting default printer for Black and White

I have no problem setting up my printer to print black and white only using my pc, but am having difficulty setting the default for the printer on my OSX 10.5.2. I've read the posts and can't locate where this setting is done. I even removed the printer and tried readding it without any success. So, how do I set my HP Officejet to print in black and white as a default and allow me to print in color when needed?

You could use the built-in presets facility to make a b&w setting and a color setting. Then when you print, you simply select the appropriate preset. Also, the last preset that you use will be the default next time you print, so this can also help speed up your printing.
Reply if you need instructions for creating presets.
One final point. Some applications, such as MS Office, have a 'Print One Copy' printer icon in the toolbar. When you use this shortcut, the print dialog is not opened - the file simply prints. For these types of application, the preset is not used so that job will print in color if that is the default printer function. But you can change the toolbar icon function so that it opens the print dialog instead of just printing. Again, if you need instruction then please reply.
Pahu

How do we set the permissions for....

Using Acrobat 9, Setting permissions is very confusing!
How do we set the permissions for document so that:
-- the end user needs no password
-- Printing: Allowed
-- Changing the Document: Not Allowed
-- Doument Assembly: Not Allowed
-- Content Copying: Not Allowed
-- Content Copying for Accessability: Not Allowed
-- Page Extraction: Not Allowed
-- Commenting: Allowed
-- Filling of Form Fields: Allowed
-- Signing: Not Allowed
-- Dreating of Template Pages: Not Allowed

Not possible. If you allow filling in forms you must allow signing. BTW, while it is nice to be able to set permissions anything that depends upon passwords that you set is easily overcome by third party utilities. Don't do anything that really depends upon these permissions. If you want to set permissions using the Document Properties Dialog box (control D), then click on the Security button. In the Security Method Dialog box, select password security and fill it out as you need.

Setting Up Printer for Wireless

Hello Again,
I contacted the forum a few months back regarding reconfiguring my printer for a new router after I switched ISP. Regretfully, my issue was never solved. Fast forward a few months and I have purchased a new computer with hopes that I could start from scratch with the installation of the printer to the new network/new computer. No such luck. I am really computer illiterate! Since I did not have a disk for windows 8, I downloaded the Windows 8 HP Driver from hp.com. The printer is showing up in my control panel menu, but it still does not print. What did I do wrong? Please walk me through this process (for dummies) step-by-step. (Equipment: Dell Inspiron 15, 3000 Series, Netgear DSL Router, HP 6988 DeskJet)

Hi there @Rclark22 , nice to see you again!
I read that you had upgraded to a Windows 8 or 8.1 computer and are wanting to use your Deskjet 6988 over the wireless network to your computer.
I will share some information with you.
First of all, there is no full drivers available for the Deskjet 6988 (older printer), with Windows 8/8.1 (newer operating system). Your option to install the printer is with a Windows Update.
See this link. It also has all the information linked inside to install, limitations, printing, etc.
Install a Windows 8 Driver with Windows Update
You can try connecting to the network by following these steps for Windows 7 however, be aware that it may not work on Windows 8. It might be worth a shot!
Setting Up the Printer for a Wired or Wireless Network in Windows 7 for the HP Deskjet 6840 and 6980...
I hope this helps you!
Enjoy your day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How to set the conditions for item deletion approval workflow?

Hi,
I have created approval workflow for item modifications ie, when user try to modify an item, it will send a mail to Project Manager. For that I set the conditions in Change the behavior of the overall task: 1. When the task process starts 2 . When the task
process completes .
Change the behavior of the single task: 1.when a task is Pending.
[I followed this https://www.nothingbutsharepoint.com/sites/eusp/Pages/5-Steps-to-Enhance-SharePoint-2010-Approval-Workflow.aspx ]
My Requirement is that I want to set this same workflow for the scenario: when the user deletes an item it will send a mail (intimation mail for item deletion) to Project Manager. here i dont want to send modification mails when user deletes an item.
When user modifies an item: 1. intimation mail, 2. Approve/Reject mail 3. intimation for approval / rejection mail.
When user deletes an item: 1. intimation mail.
How can we set it in one approval workflow?? where i have to set the condition for sending either item modification mails or deletion mail.
Thanks,
Praveen ji

Hi,
According to your post, my understanding is that you wanted to start approval workflow when item deleted.
You should first make some changes to trigger the workflow when you delete the item.
You can use the Event Receiver to achieve it.
In order to trigger workflow on item delete you need to create event receivers and from event receiver call the workflow already attached with list.
http://ravendra.wordpress.com/sharepoint-workflow-on-list-item-delete/
You can also create custom action to start the workflow, you can refer to the following article, then modify the workflow as your need.
http://blogs.sharepoint911.com/blogs/jennifer/Lists/Posts/Post.aspx?ID=50
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

How to set the icon for the entire application with JFrame.setIconImage

I set the icon on the main frame using JFrame.setIconImage(). The icon is shown properly in the main frame.
If more JFrames are opened from the main frame, the newly opened JFrames also show the icon.
However if JDialogs are opended, in some cases the icon set on the main frame is shown and in other cases the coffee cup.
What is JFrame.setIconImage() expected to do? Setting the icon for a single JFrame or the entire application?
How can I set the icon for the entire application?
How can I set the icon for JDialogs?
Thank you

In order for your dialogs to use the same icon as the frame, you must parent the dialogs to the frame which has the custom icon.
See the following thread for more information: http://forum.java.sun.com/thread.jsp?forum=57&thread=362542
cheers,
Greg

How to set the size for height of iView tray?

Hi,
I have created a ABAP webdynpro component and integrated this comp with iView. Then i integrated iView into Page in portal. That is working fine.
But the size of tray/window which is displayed in the page is very small.
How to increase the height of that Tray/window/iView containing my component?

Hi,
By changing the maximum automatic height and Minimum automatic height property of the iview you can set the size for height of your iview.
to do this follow the setps:
goto content administrator -> portal content -> your folder where you created your iview or directly to your iview -> right click -> open -> object,
and now in property category choose appearance-Size from the drop down menu and set the above properties to your required height.
if you want the end user to modify this property set the property to read/write .
*********please reward points if the information is helpful to you********************

How do you set the duration for multiple stills in iMovie 2013?

How do you set the duration for multiple stills in iMovie 2013?
Before upgrading to the latest version of iMovie last month, I was able to set the duation of all of the stills included in an iMovie project at one time by clicking the apply to all still box in the adjustment pop up. That option is no longer apparent. If it is available I cannot find it, and I have tried several different ways to accomplish it. I have tried the iMovie help section and can find nothing to help.
Apple, do I really have to adjust close to 500 pictures to a 5 second duration individually???
REALLY??!!

...why wouldnt people want that level of accuracy when animating, especially when working to music at a specific duration?
Because often people are animating to words or beats in the music. Music is rarely performed with a computer-precise beat and tempo. Musicians aren't robots: they swing the beat sometimes. They use rubato. They change tempo. They change time signatures. As a result, you have to FIND those words and beats. It's not a situation where you can say, "There! I've found the duration of one beat! Now it's easy to find the rest of them!"
If you try it, you will be very disappointed.
Try finding the precise end of a piece of music that fades or ends on a big chord with a ring-out. You'll see that it's trial-and-error: what's the point where it becomes inaudible? It depends on how high your speakers are turned up. You might have them way up, you set an end point for the layer, and then you do a RAM Preview at a more reasonable volume. You might say, "Hey! The music ends before the layer ends!"... but you KNOW you set the layer's out point when the audio file goes silent.
AE has layer markers that can be used on an audio layer to mark beats, words, etc. They come in very handy.
I guess it comes down to this: because AE can do so much different stuff, there are very few automated procedures. Oh, Adobe tries with effects that convert audio levels to keyframes, but they're not 100% reliable... especially on something like a capella choral works. For true accuracy, you need find the timings yourself.
If you want something simpler, try a different application. But be prepared for lower level of accuracy.

Can I set the language (for spellcheck) of a document in the iCloud Web version, or iOS version, of Pages? If yes, how?

Can I set the language (for spellcheck) of a document in the iCloud Web version, or iOS (iPad) version, of Pages? If yes, how?

In iOS, the spellcheck language follows the keyboard.
The forum for questions about iOS Pages is at
https://discussions.apple.com/community/app_store/iwork_for_ios

Setting The Printer For Reverse Or Mirror Image

Similar Messages

Maybe you are looking for