How to setup a port on my setup

Hi, I am trying to setup a port on a airport extreme that is connected to a time capsule on bridge mode, It wont let me setup the port on the time capsule, because then I have to take it off bridge mode and if I take it off bridge mode I have double na, and there is no option to set it up on the airport, so my question is how do I setup a port on my airport or time capsule?
Also I have setup ports on the network before but not when the time capsule was on bridge mode
thanks

You have a modem/router or gateway type of device here. 
It is the Arris that is acting as the main router for your network......that is why the AirPort and Time Capsule need to be in Bridge Mode.
You need to set up port forwarding on the Arris gateway since it is the router for your network.
Contact Arris support for details on how to configure port forwarding on the gateway.
Once you have port forwarding setup on the Arris gateway, the AirPort and Time Capsule will pass those settings through to connected devices since they are configured in Bridge Mode.

Similar Messages

  • How to identify Which ports are using in RAC setup?

    Hi,
    how to identify Which ports are using in RAC setup?
    Thnaks,

    [Viewing Port Numbers and Access URLS|http://download.oracle.com/docs/cd/B19306_01/install.102/b14205/ports.htm#sthref1208]

  • How can we achive active/active cluster setup with Oracle

    Hi Experts,
    How can we achieve active/active database setup with oracle WITHOUT USING RAC.. As far as I know it's impossible (unless I'm wrong)..
    We are using Oracle 11.2.0.1 64bit on Windows 2008 server. We deployed Oracle FailSafe but that's more of an active/passive solution based on a windows cluster.
    The other solution we were thinking about is to use DataGuard and replication.. two servers.. the oracle instance running on one server generating logs, and the other server receive the logs and apply them to the physical standby db.. Still, this is not a real active/active setup.
    So, is it possible to run 2 servers in an active/active cluster and have the oracle database in an active/active setup or have the instance running on multiple nodes (at the same time)?
    Thanks

    Let me give you a brief explanation of what the situation is and you can be the judge..
    My client have four databases with the smallest one being 20GB and the biggest around the 35gb (SGA 750mb to 1.4gb (Tiny by DB standards) and probably on a normal day, you can run all four of them on a decent desktop).. The DBs are used to keep track of people information. Through out the year, the databases are almost sitting idle, and by idle I mean, the odd update here and there, the odd report..etc. No hard real processing of any sort. Two days of the year (end of year) we have all the operators consolidating records and what's not and they will be pounding away entering data and updating the tables - with hourly reports that goes to 3rd parties. The client expects a 99.99 up time and availability during those 2 days.
    Now, tell me, How can I justify using RAC and spending hundreds of thousands of dollars in licensing and what ever extra costs introduced by the complexity of the environment for the above scenario knowing that I don't have any real use for RAC for 363 days of the year; and we MIGHT need it for 2 days of the year? This is the dilemma we're facing.
    Thanks
    Edited by: rsar001 on Sep 3, 2010 9:42 AM

  • Please do the following: -Close any running programs -Empty your temporary folder -Check your internet connection (Internet-based Setups) Then try to run setup again. Error code -6003. How do I empty temporary folder?. Thanks. Allan

    I am having a problem installing Nikon Codec, software to view photos and get this error error message: Setup has experienced an error. Please do the following: -Close any running programs -Empty your temporary folder -Check your internet connection (Internet-based Setups) Then try to run setup again. Error code -6003. How do I empty temporary folder?. Thanks. Allan

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    *http://support.mozilla.com/kb/Deleting+cookies
    *http://support.mozilla.com/kb/How+to+clear+the+cache

  • How to make "Utility" button in Printer Setup Utility available

    There, i add a printer in the Printer Setup Utility and select it. i want to open printer utility, but the "Utility"
    button in Printer Setup Utility is dimmed. In addition,
    "Printer\Configure printer" in the Printer Setup Utility menu is also dimmed.
    How to make "Utility" button in Printer Setup Utility available?
    Thanks in advance.

    Hi Jiong,
    That button is to acess the printer utility for that particular printer, not all printers come with a utility. If you have the disk that came with your printer, you can see if it has a Macintosh driver, if it does then it mimght have the utility with it. It's pretty hard to run the utility on its own, its burried somewhere in the system so that's why you have that menu item. You can alternatively go on the internet and download the latest driver, which might have a utility. All the utility will do will give you options to check nozzle patterns, alighnement, ink tank levels, and cleaning options - just mimnor maintenence junk, non-essentials, etc. I think Tiger just comes with a whole heap of generic drivers for different printer lines, can't say for sure.
    I wouldn't worry about it, especially if you have a relatively old printer.
    Hope that helps
    DKR

  • How can I find flash media playback setup page? Flash media playback OSMF site - missing, hijacked, bad DNS?

    How can I find flash media playback setup page? Flash media playback OSMF site - missing, hijacked, bad DNS?

    I'm having this issue as well. Weird how hard is to find info and solutions on Google.What do people use instead? A lot of tutorials link to this page...

  • How to Enable Quick post in BIOS setup?

    Hi anyone,
    does anyone know how to Enable Quick post in BIOS setup? This option does not seem to be there in setup or maybe Im not going about it the right way. Any help would be appreciated.
    Cheers
    muks

    Quick post option does not exist and there is nothing to do. All you can try is to use some hardware diagnostic tool.

  • How does manual wifi vs. wifi-protected setup differ

    I setup my wifi router manually.  When I turn on MAC filtering if gives me a warning that I cannot use "wifi-protected" setup.
    1) How does manual wifi vs. wifi-protected setup differ?
    2) Why does using a manual configuration with MAC Filtering (Allow List) lockout wifi-protected setup?
    Thank you,
    Ed S.
    Solved!
    Go to Solution.

    Hi edspyhill09. Yes, it will disable Wifi protected setup because you are trying to filter the Mac addresses of the devices that you want to connect to your network. Only those mac addresses that  are listed can connect to your network so it defeats the purpose of having WiFi protected setup enable. WiFi protected setup lets users to connect multiple devices to the network and enable data encryption by pushing a button which is most of the time on the front panel or some of them is in the back panel labeled WPS. But WPS doesn't apply to all devices because some gadgets are not WPS capable, only those devices that are WPS capable can take advantage of this feature. Manual wifi is the conventional way of connecting to your wifi network. You look for the network name ssid and connect to it, if it ask for a password, then just type in the password and voila! You're now connected to your wifi network. Hope this helps you out!

  • How can I change the default page setup for printing messages in Apple Mac Version 4.6 (1085)

    How can I change the default page setup for printing messages in Apple Mac Version 4.6 (1085)

    As soon as I posted, Ifigured this one out on my own by going into user settings and changing the default there. Then I was able to delete the default @mac account. Thanks!

  • How to set up port forwarding on extreme with NAS

    I've purchased a NAS (Synology DS211j with 2 caviar HD) over a month ago. Setting up the NAS for wireless connection locally was easy. I've been trying for 3 weeks on how to set-up port forwarding on my airport extreme base. I''ve researched and read countless threads on port forwarding and still cannot grasp the concept and the step by step provided.  I need somebody that's patient enough to hand hold and guide me through this frustrating problem.
    Equipment:
    Comcast cable modem connected into Airport Extreme Base
    Synology DS211j connected to Airport Extreme Base
    Problem:
    Cannot connect to my DiskStation via internet from wherever
    confused whether to use FTP or Personal file sharing or whatever is the most suitable for my needs
    Just need to access files on my DiskStation view/upload/download from wherever I'm at, whether on PC or Macbook Pro
    Thanks in advance!
    Marcus

    Here are the basic steps to configure your NAS for port mapping:
    AEBSn - Port Mapping Setup
    To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
    1. Reserve a DHCP-provided IP address for the host device.
    AirPort Utility > Select the AEBSn > Manual Setup > Internet > DHCP tab
    On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
    Description: <enter the desired description of the host device>
    Reserve address by: MAC Address
    Click Continue.
    MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
    IPv4 Address: <enter the desired IP address>
    Click Done.
    2. Setup Port Mapping on the AEBSn.
    AirPort Utility > Select the AEBSn > Manual Setup >Advanced > Port Mapping tab
    Click the "+" (Add) button
    Service: <choose the appropriate service from the Service pop-up menu>
    Public UDP Port(s): <enter the appropriate UDP port values>
    Public TCP Port(s): <enter the appropriate TCP port values>
    Private IP Address: <enter the IP address of the host server>
    Private UDP Port(s): <enter the same as Public UDP Ports or your choice>
    Private TCP Port(s): <enter the same as Public TCP Ports or your choice>
    Click "Continue"
    (ref: "Well Known" TCP and UDP ports used by Apple software products)

  • Help with Proper DNS Setup for Leopard Standard Server Setup

    Hello All,
    Problem Description-
    I was reviewing some training today on DNS setup and checking for proper setup with the sudo changeip - checkhostname tool and I seem to have an incorrectly configured DNS setup. So I need some help on correcting it. When I go to the "Server Preferences" tool I cannot log in using apple.ourdomainname.com instead in order to use the tool I have to input localhost as the server name. Now I just thought that the system was broken or something and with the help of my training I now see it's a DNS problem. I thought I had everything proper since I followed the steps of creating proper DNS/RDNS entries with my ISP. Now I am stuck wondering what else isn't working properly due to the DNS issue. Thanks in advance.
    Technical Info-
    My ISP provides us with 5 static IP's and we have asked them to create entries and verified the setup of apple.ourdomainname.com = x.x.x.x which is one of our public IP's assigned currently assigned to the WAN port of our Apple Airport Extreme. We have also had them create a PTR record which also is present, verified and functional. Our MacMini running 10.5.5 is connected directly to one of the ethernet ports on our Apple Airport Extreme which is our NAT/Firewall for the LAN. So during the setup of the Standard Server install the OS configured the Airport with the required ports for chat/web/vpn. And mobile Mac's can VPN in and gain folder access and web works fine too. We don't use the e-mail portion so I can't say how that works. The server is using the DNS of 10.0.200.1 which is the IP of the Airport and the airport is programmed with the DNS of OpenDNS servers 208.67.222.222 and 208.67.220.220. The reason for this whole long shpeal is that I want to give as much technical background as possible for the best possible help.
    Thanks
    DM

    What happens when you use 'Localhost' instead of 'localhost' (i.e. capitalizing the 'L')?

  • How do I open ports on my airport extreme and assign a fixed IP Address for a device connected to my network?

    I recently had a security system installed in my house.  One of the features is an EPAD which enables me to have a virtual keypad on my iphone, and computer to operate the alarm system.  The technician was not familiar with Mac's and Airports.  How do I open port 80 to 80 in my airport and assign a fixed IP address for the EPAD?  Apparently this is what is needed to make this work.

    There are three ranges of "strictly local" IP addresses reserved for local Network use:
    192.168.xxx.yyy
    172.16.xxx.yyy
    10.xxx.yyy.zzz
    What your Router does for you is to act as your agent on the Internet.Your requests are packaged up and forwarded on your behalf, and only when a response is expected is the response returned to your local IP address.
    Directing Network Traffic to a Specific Computer on Your
    Network (Port Mapping)
    AirPort Extreme uses Network Address Translation (NAT) to share a single IP address with the computers that join the AirPort Extreme network. To provide Internet access to several computers with one IP address, NAT assigns private IP addresses to each computer on the AirPort Extreme network, and then matches these addresses with port numbers. The wireless device creates a port-to-private IP address table entry when a computer on your AirPort (private) network sends a request for information to the Internet.
    If you’re using a web, AppleShare, or FTP server on your AirPort Extreme network, other computers initiate communication with your server. Because the Apple wireless device has no table entries for these requests, it has no way of directing the information to the appropriate computer on your AirPort network.
    To ensure that requests are properly routed to your web, AppleShare, or FTP server, you need to establish a permanent IP address for your server and provide inbound port mapping information to your Apple wireless device.
    To set up inbound port mapping:
    1) Open AirPort Utility, select your wireless device, and then choose Base Station > Manual Setup, or double-click the device icon to open its configuration in a separate window. Enter the password if necessary.
    2) Click the Advanced button, and then click Port Mapping.
    3) Click the Add button and choose a service, such as Personal File Sharing, from the Service pop-up menu.

  • How to add Ethernet ports to an Airport Extreme Base Station?

    I have successfully connected an HP Office Jet 6310 to the Airport Extreme Base Station, after downloading the latest software from HP. It is printing wirelessly, and it is great so far.
    The only problem is that the cable modem connected to ADSL has only one Ethernet port, and the Airport Extreme Base Station also has one Ethernet port. However, I need one more port to connect a phone (Vonage Telephone Adapter = VTA).
    What is the easiest way to achieve this? I saw several other messages discussing hubs and routers, but the answer is not clear yet. If I purchase an additional router, should it be connected between the cable modem and the Airport Extreme Base Station, or the other way round?
    Any help or advice would be appreciated!
    Thank you in advance for your time.
    MacBook Pro with 1.83 GHz Intel Core Duo   Mac OS X (10.4.7)  

    One final vital piece of information, which should be my conclusion on this topic.
    Following the advice received, I purchased a Switch from Linksys. Since the device didn't work for my purpose (dividing the Ethernet connexion into an Ethernet line for the HP printer and the Vonage phone), I called the Linksys support.
    I was told that what I needed was not a switch, but a router. I thus had to get reimbursed for the switch and hunt for the proper router.
    Finally, today, I have been able to find the item corresponding to my needs:
    A Belkin Wireless G Router F5D7230-4
    It costs less than 50 US$ and has all the necessary Ethernet ports. The setup is very simple, and I got it operational within a couple of minutes, despite some small problems getting the setup Wizard to work. It is Mac OS X compatible.
    Thus, at the end, I have got the HP 6310 Office printer and the Vonage VTA phone working together, with a robust Wireless network including WPA security. I would recommend this type of setting.
    The only trouble is that the AirMac Extreme Base Station has become completely useless! I will perhaps keep it as a souvenir, or as a decoration in the living room... This wouldn't have happened if the creators of this nice object, which is extremely expensive for what it provides, would have thought of including at least two Ethernet ports!
    The unexpected reply to my query could thus be ironically formulated by saying: "replace the Airport Extreme Base Station with a cheaper an more efficient device." Sorry for that!
    With my best regards to those who took the trouble to read this thread to the end.
    Yours, Hotaru

  • CS4:  "Critical errors were found in setup. Please see the setup log for details" !!

    I am using Win XP Pro SP3. I have CS3 installed, and successfully installed Dreamweaver, Fireworks and Flash from CS4 Design Premium. Then I successfully uninstalled DW, FW and FL CS3.
    When I tried to open a SWF in Illustrator it failed to open, and then I tried to create a really simple SWF (a rectangle) by exporting from Illustrator and tried to open that and it also failed. Whenever I tried to open or place ANY SWF into Illustrator I get a "file *** is in an unknown format and cannot be opened" error.
    I decided there must be a corrupt file, maybe the upgrade must have affected some Illustrator files, so I tried to repair the CS3 installation. After over 2 hours of INTENSE FRUSTRATION having to constantly switch CS3 and CS4 disks many MANY times, the installation failed, listing "common files" that were missing from non-existent folders such as "C:\Documents and Settings\[username]\Desktop\Adobe CS4\Fireworks CS4\payloads\etc
    When I tried to repair the CS4 installation after loading all the profile settings it errors before the installation window comes up, with "Critical errors were found in setup. Please see the setup log for details". Then it shuts down the installer. I then tried to do a system restore and system restore failed on all restore points!
    Please help:
    1. Where is "the setup log"?
    2. Will creating and populating the folders mentioned in the failed CS3 installation from the CS4 disk allow it to work?
    3. How can I uninstall CS4 if I can't even get to the installation window?
    4. Has Adobe just DESTROYED MY REGISTRY BEYOND REPAIR!!!???

    im haveing a huge irritation useing illustrator cs4 live paint bucket because i can use everything else apart from the paint bucket which should be the easyiest tool to use sometimes it works with the white arrow sometimes it doesnt i sometimes get this below message
    the selection contains objects that cannot be converted. live paint groups can only contain paths and compound paths. clipping paths are not allowed
    the lines which i have drawn are connected which i believe have to be in order to use the paint bucket and i have no clipping paths so i am am baffled
    i presume it is because the line is set to 0.01 it seems the live paint bucket wont notice thin lines, but i tried makeing the line thicker so i could use the paint bucket and it still doesnt work.

  • I'm trying to install Windows XP on a system, and Setup gets stuck at the "Setup is inspecting your computer's hardware configuration" stage

    I’m trying to install Windows XP on a system, and Setup gets stuck at the “Setup is inspecting your computer’s hardware configuration” stage
    how can I fix it, i turned off and on, and the message still there help please

    If you have a PPC Mac, you can't install Windows unless you are using something like Parallels or a virtual application.  If you are using Boot Camp, eject the disc, reboot and try again.
    Miriam

Maybe you are looking for