How to setup a Seamless Transaction Gateway with PayPal (Australia Only)

I've been working with the team at PayPal to allow BC Partners to set up a cost effective way to setup a Seamless Transaction Shopping Cart Process on their BC eCommerce website without the need for a 3rd Party Merchant Provider like eWay or Secure Pay or their bank. This is designed for entry level businesses who want to control their setup costs and keep all funds in one place (PayPal).
Currently BC doesn't support Paypal's Payments Pro plan in Australia so you are limited with either a non-seamless payment process or using a 3rd Party Merchant provider with can be costly.
Without going into too much detail, the setup on PayPal's side is a mixture of a couple of plans, and is a little complicated however through our discussions we come to an arrangement of any additional fee's associated with the setup being waived since this is more so of a technical workaround than anything else.
Basically PayPal is the merchant provider, and the customer doesn't leave your website when making a purchase through the Shopping Cart. The setup is only $25/month plus transaction fees of between 1.1 to 2.4% + 30 cents depending on the number of payments (this is just an initial guide and confirmed on your discussion with the PayPal).
Because the setup involves quite a few steps and departments I've arranged a contact that will fast track this process and is familiar with this unique setup.
How to setup PayPal for a Seamless Transaction Process
Sign up for PayPal Business account  Timeframe: <20 minutes
Email Peter [email protected] or phone (02) 8288 0333. CC me [email protected] or mention my name so he can correctly setup the process and apply the discounted pricing.
Prepare for the Verification process for the PayPal account (Proof of ID, Proof of Address, Business documents etc).
Wait for Account Verification. You will be informed to setup both PayFlow Pro* and Website Payments Pro (*the PayFlow payment will be waived as mentioned previously). Timeframe: up to 5 business days depending on swift supply of required documentation.
Wait for your Billing Agreement for Website Payments Pro once application has been approved. Sometimes they will receive a phone call to verify details of the application. Timeframe: Up to 72 hours
Login into your PayPal account to accept the Billing Agreement.
Notify Peter once the Billing Agreement has been accepted so your PayFlow Pro can be linked to your Website Payments Pro
Login into your Business Catalyst Website and navigate e-Commerce > Payment Gateways
Select PayPal PayFlow Payment Gateway (..,AU, ..)
Enter your Username, PayPal Password, and add VSA as the Partner
Setting up PayPal Payments
If you also want to make payments via PayPal (ie, with the customers Pay Pal account) you can continue with setting up the PayPal Website Standard secure with your PayPal Customer ID and your PDT Token which you'll need to setup in your PayPal Account.
If you have any questions give me or Peter an email. I'll continue to update this document as I go.
Please note this setup is current for Australian Pay Pal Customers only. This process does not support re-occurring billing.

Dennis, sounds like you are having issues connecting to your network. Here is what we are going to do. 
On your first question,  and second question for that matter, I would suggest using a WPA password. Our printers doe not associate with the other types as well as WPA. You should be able to do that, though I have not personally set up a router that way to have experience in how it will react with the networked devices. As for the issues you are having, once the settings are all in the correct order I am going to suggest we connect the printer to the network through the computer. 
What you will do is install the printer using a USB connection, then re-run the setup software. Here there should be an option for USB to  Wireless. This will be the easiest way to be sure that all the settings are correctly transferred over. 
http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?cc=us&lc=en&dlc=en&product=303770
You can find the software in the link above. 
Let me know if this helps! 

Similar Messages

  • How can I connect my iTunes account with PayPal?

    How can I connect my iTunes account with PayPal?
    In the payment method page (I access it by iTunes for Mac) there's no PayPal button!
    PS: I live in Italy

    What do you mean by sync your iTunes account?

  • How to configure AMconfig.properties on gateway with 2 portal servers

    Hello,
    I run into an issue where I want to setup 1 portal gateway with 2 portal servers(+ access manager) all on separate machines. How can I define in AMconfig.properties that there are possible two portal servers.
    All is version 2005Q1
    Please see part of my actual AMconfig.properties :
    # grep portal AMConfig.properties
    com.iplanet.am.directory.host=portal1.domain.int
    com.iplanet.am.server.host=portal1.domainl.int
    com.iplanet.am.console.host=portal1.domain.int
    com.iplanet.am.profile.host=portal1.domain.int
    com.iplanet.am.naming.url=http://portal1.domain.int:80/amserver/namingservice
    com.iplanet.am.notification.url=http://portal1.domain.int:80/amserver/notificationservice
    com.iplanet.am.localserver.host=portal1.domain.int
    com.sun.identity.liberty.interaction.wspRedirectHandler=http://portal1.domain.int:80/amserver/WSPRedirectHandler
    Kind Regards
    Roland Vlerick

    See this thread.
    Error Installing Groupware Portlets for WLP 10.3.2
    Brad

  • How to setup a Class B network with WRT54GX ver. 2

    Hi all,
    I bought a WRT54GX ver. 2 router. I wanna know how to setup the IP address say 128.1.50.136 with subnet mask 255.255.0.0 (Class B network)? By the way, 128.1.0.0 is my network zone.
    If the router can't change, what should I do? Any other router support Class B network?
    Thanks!

    bcow wrote:
    I did but it doesn't work. It seems don't have 255.255.0.0 to select.
    would you state more clear of how to do it? Thanks!
    It does not have that because it does not support it... the router runs on CLASS C only because it was designed and made for SOHO only... bussiness lines of Linksys or Cisco can do that....but not this router...
    "Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

  • HT1338 How to setup an external HDMI screen with a Mac Book Air

    How do I setup an external HDMI screen with a Mac Book Air? I am using an Apple accessory Moshi cable interface with a Samsung Syncmaster screen SB24B300 and I am unable to get any response. Thank you.

    You need to connect it to the computer using either USB or Thunderbolt. Setup is simply prepping the SSD:
    Drive Partition and Format
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.

  • How do I Rename Mac Hard Drive with Home Folder Only?

    Hello,
    I have a Macbook Pro with an SSD which has OSX Snow Leopard and my Applications, and the other hard drive has my Home Folder. I replaced the optical drive with the SSD.
    The other hard drive has the standard name of 'Macintosh HD'. I need to change it to something without spaces in order to get some developer software to work (i.e., it can't have spaces in the workspace name, and now that my Home folder is on a drive that doesn't have OSX, it refers to it as '/Volumes/Macintosh HD/.../...'
    I ran into a disaster by simply changing the 'Macintosh HD' name to 'MacintoshHD' - It prevented me from logging in and I had to use the OSX Install disk to use the command line to rename the hard drive back to 'Macintosh HD'. My guess is because my account was referencing a home folder location that no longer existed.
    My question is how can I rename my hard drive with my Home Folder? Can I change the hard drive name, and then immediately change my Account to reference the new hard drive name (and thus the new location of my home folder), and then reboot? Will this work if I do this in this order? Or is there another way to handle this entirely?
    I'm very hesitant to try this again as I don't want to have to go back and use the OSX install disk - my SSD took the place of the optical drive and I have to go and take it out, put it back in...etc.
    Any help is appreciated.
    Regards
    Chicago29

    I don't have a setup to test this, but you might try the following:
    Create a second "normal" admin account with its home folder on the boot drive, then log out of your regular account and log into the new one. From there you could rename the large hard drive, then go to System Preferences>Accounts, select the first account, then right-click>Advanced options to change its home directory path to match the new HD name. That way you're not changing the home folder path "in mid-air."
    It's probably a good idea to keep a tiny "self-contained" admin account on the boot drive anyway, so you don't get locked out in the event of future trouble accessing the large disk.

  • How can we run MDBT transaction for non-valuated items only

    HI,
    We want to run the MDBT transaction for non-valuated items only...but through this transaction we can run for all items..
    How can we run only for non-valuated items???
    Regards,

    Dear Anil,
    MD02 - Material level planning ( Multilevel )
    MD01 - Plant level planning ( Multilevel )
    MDBT - Back ground MRP ( Multilevel )
    coming to ur query if all 20 materials belongs to one storage location or one MRP controller
    Then you perform MRP for that 20 materials with the above given user exit
    Also Plz refer my reply from this thread
    [Re: MD01 Replanification.]
    Regards
    Madhu

  • How do I connect the online registration with paypal or credit card?

    I need to know how to hook up with paypal or credit cards with the online registration.

    Check out this getting started guide:
    http://forums.adobe.com/docs/DOC-1632
    Randy

  • 10.6.1 Server - how to set up as internet gateway with dynamic IP?

    Hi,
    I installed Snow leopard server 10.6 on a macpro, to share server services (address book, ical, web, mail and VPN) over my office local network, wirelessly (less than 10 computers, all macs).
    I would like to set it as a gateway, as indicated on the manual "getting started", so: Internet > adsl modem > server > Time capsule/extreme (for sharing wirelessly the internet connection and all the services provided by server).
    I don't have a static IP address and i don't have a DNS managed from ISP.
    I tried to read many posts, discussions and apple/resources manuals, but i didn't find out the right way to fix this, with proper configuration of DNS, to keep it standing.
    Which steps should i follow?
    Note: There is a thread from Singapore for setting up server without a static IP, but the configuration is: internet > DSL modem > airport > server (it's not specified how users can connect from outside the network)
    i would like instead to set up the configuration explained above: internet > adsl modem > server > Time capsule/extreme
    Thanks in advance for your help
    Pietro

    Check out this reference material. http://images.apple.com/server/macosx/docs/NetworkServices_Adminv10.6.pdf
    It's a little lengthy and in-depth, but not terribly difficult to walk through.
    In short:
    1.- pick an address range (192.168.1.1-254, for example)
    2.- assign a static ip to your server (192.168.1.1)
    3.- configure your server's network interface to point at your current router (adsl modem), and use your server's static ip for dns lookups
    3.- turn on the dhcp service and configure a scope (192.168.1.20-254, to give you a few addresses at the bottom of the range outside the leasing scope)
    4.- turn on the dns service and configure a forward and reverse lookup zone for your internal domain name (internal.yourcompany.com)
    5.- configure your clients to pull addresses from dhcp
    I'm sure I missed some important stuff, and don't be upset if your neighborhood gets access to your internal resources due to a misconfiguration of your routers acl's.
    If you're still not clear on what to do, bring in an I.T. consultant for a short engagement to initialize and stand up all your services and show you how to support them.

  • How to setup SCXI1127 in scanner mode with NI-DAQmx

    Hi,
    I have 2 1127 mux cards in my SCXI frame and a digitizer/DVM in my PC. I am planning to perform a scan on selected channels across both cards using synchronous scanning ( I cannot get handshaking to work ). I found some examples but they are all using initialization string that looks like this: "SCXIn::i,j:CANNER", but that only works with NI-DAQ legacy not NI-DAQmx where my instrument is just called SC1. I do not know how to set it up with NI-DAQ legacy, it will not give me that option ( using NI-MAX I can setup SCXI-1000 but not PCI-4070 ). Also I do not know how to initialize the NI-SWITCH driver so I have it as one instrument with one instrument handle. I am using NI-DMM, NI-SWITCH 3.0, NI-DAQmx 8.0 and MS Visual C++ Express.
    Thank you,
    Jerry.

    Jerry,
    This is Travis over at NI.
    There are example programs for doing synchronous scanning that ship
    with the NI-SWITCH driver.  You can access them at
    Start>>Programs>>National
    Instruments>>NI-SWITCH>>Examples>>C.  Choose
    "niSwitchDMMSwitchSynchronousScanning."  Your resource name will
    be the same as the your resource name in DAQmx.  Please direct any
    further questions to Minh.
    Thanks, Jerry.  Have a great day!
    Travis

  • How to setup peer to peer network with Vista machine.

    Hello,
    I just got my very first Apple computer last week and I'd like to copy some files from my Dell PC with Vista Premium installed. I don't have a wireless network setup yet (hopefully soon), but I'd like to copy some files from my PC to my Mini. I was wondering if it were possible to network the two systems using just an ethernet cable between the two.
    Might someone know how to set this up or refer me to a document that explains all the steps needed to accomplish this?
    Thanks in advance,
    Jeff

    Apple have a page that talks you through doing this:
    http://docs.info.apple.com/article.html?artnum=304721
    Probably a good place to start.

  • How to setup Supp Life Coverage reduction with age

    Hi All,
    Ravi,
    We have a problem with Supplement life coverage dropping on non flex program window when there is a reduction in age. When somebody moves from 64 to 65, the benefit won’t show up on non flex window after starting a LE (open enrollment) and that causes the self service enrollment page not show up the Supp Life the EE is currently enrolled.
    It stays fine for people moving from 65 to 66 (within the range), but someone moving from 64 to 65, 69 to 70, 74 to 75 and 79 to 80, the coverage drops on non flex window. The enrollment results window shows their age 64 coverage amount which is fine.
    When we try to enroll the EE already enrolled in Supp Life moving to 65, the list of values on NON Flex window shows that the EE is already enrolled with reduced amount and all we do is save.
    We have setup supp life to reduce
    •     35% when employee turns 65
    •     25% when employee turns 70
    •     10% when EE turns 75
    •     10% when EE turns 80.
    We had setup our variable rate profile Age 65 to 69 Reduction, Age 70 to 74 Reduction, Age 75 to 79 Reduction and Age 80 and Over Reduction with usage type of Coverages
    Under Coverage Calculations, we had setup Variable Coverages with the above variable rate profiles. We used rules for calculating the upper limits..
    We opened SR and support says that the variable coverages with flat range never worked. They logged a bug, but I am sure there could be many clients who use this functionality and was wondering what would be the best method to solve this problem.
    Thanks
    Veena

    We are using variable rate coverages and the coverage amount is calculated right.
    But when LE is started and navigate to Non Flex window to change his enrollments, we donot see the Supp Life benfit for this Employee.
    When EE loginto self service to change his/her enrollments, SS doesnot show the EE as being enrolled in Supp Life.

  • How to setup a 'duplicate/mirror view' with a different zoom level?

    Hi Photoshop Gurus,
    I constantly keep zooming in and out of the same images. It drives me crazy to view it at normal zoom level and zoom back into deep pixels.
    Is there a way so that I have a duplicate floating window/view that shows realtime editing of an image at a different zoom level? (Think of it like a display mirroring, but, I am trying to mirror the same document at a normal zoom level).
    This is my scenario:
    - I usually work with small images/icons.
    - I zoom deeply into an image at pixel level ~3000%.
    - Change some pixels and do editing
    - Zoom back out to 100% to view how it looks normally.
    - Repeat and repeat.
    Can I always have a 100% zoomed view along side the same document?
    Thanks for your help.
    PHOTOSHOP CS5 Mac Snow Leopard

    The navigator palette is just another document view.  Open it, put it where you want, resize it, and you can use it to control (and see) what part of the docuemnt your zoomed in view is showing.

  • How to setup Analyzer 7.0.1 with Java plugin 1.4.2_03?

    Hi,<BR>I use Hyperion Analyzer 7.0.1. The default Java Plugin is 1.3.1_09 and in my environment it is working without any problems.<BR><BR>In my company there are other non-Hyperion applications that requires java 1.4 or higher.<BR><BR>I noticed that Java Plugin 1.4.2_03 is also available on Analyzer installation CD. So I installed this java version on client computer, but when the applet is started it opens the java 1.3 installation window.<BR><BR>I probably need to configure some settings on Analyzer server computer. What should I change on server site of computer to have java 1.4.2_03 (or higher if posible) accepted on client computer?<BR><BR>Thanks,<BR>Grofaty

    In pdf book "Hyperion Analyzer Release 7.0 Administration Guide - P/N: D750770000) on page 129 there is instruction (please see bellow).<BR><BR>But in my Analyzer.jsp file are "<hya:" template tags. When I try to replace the template tags with the ordinary text described in bellow instructions I got error from Tomcat app. server - unable to compile jsp file.<BR><BR>How to replace clsid number of java JRE to get working a java 1.4 version?<BR><BR>Is there any file where <hya: are specified and I could change the "<hya:" variables with constants?<BR><BR>Thanks,<BR>Grofaty<BR><BR><BR>===========================================<BR>Configuring Different Java Plug-in Versions<BR>===========================================<BR><BR>The Hyperion Analyzer Java Web Client and Administration Tools Client are<BR>configured to use the Sun Java Plug-in 1.3.1_09. Administrators can update the<BR>Sun Java Plug-in versions by editing the Analyzer.jsp and Administrator.jsp files<BR>static versioning statement. This mandates the loading of the specified version of<BR>the Sun Java plug-in.<BR> To edit the Analyzer.jsp and Administrator.jsp static versioning statement, perform<BR>the following tasks:<BR><BR>1. Open the Analyzer.jsp file using a text editor.<BR><BR>2. Search for the static versioning statement class ID, clsid:.<BR>The current class ID value is as follows:<BR>clsid:CAFEEFAC-0013-0001-0004-ABCDEFFEDCBA<BR><BR>3. Edit the clsid value, to the desired Sun Java Plug-in version.<BR>Alphabetic characters at the beginning and end of the string are set by Sun. Do<BR>not change these characters. The first two sets of numeric digits indicate the<BR>Sun Java Plug-in version. The third set of numeric digits indicates the patch<BR>number. For example, the clsid value for the 1.3.1_10 Sun Java Plug-in is as<BR>follows:<BR>clsid:CAFEEFAC-0013-0001-0010-ABCDEFFEDCBA<BR><BR>4. Save your changes to the jsp file.<BR><BR>5. Repeat all of these steps for the Administrator.jsp file.

  • How to setup ORCLDEFAULTPROFILEGROUP on during synchronization with AD

    Users with groups load from AD. And use external authentication plug-in. I want to set defult page for diferents groups, so when a user belongs to group A, its first page after login was page A
    I set for profile group A - default home page A, and for profile group B - defult home page B.
    In Global settings default page C.
    After these settings, when user from group A logs on, portal redirect to page C, not to pageA.
    I need that when user log on portal, portal redirect to page for his group.
    I set ORCLDEFAULTPROFILEGROUP for user and all work fine, but I cannot set this attribute on during synhronization. I don't know what do it.
    Please help.

    To run a public VPN server, you need to do the following:
    1. Give the gateway either a static external address or a dynamic DNS name. The latter must be a DNS record on a public DNS registrar, not on the server itself. Also in the latter case, you must run a background process to keep the DNS record up to date when your IP address changes.
    2. Give the VPN server a static address on the local network, and a hostname that is not in the top-level domain "local" (which is reserved for Bonjour.)
    3. Forward external UDP ports 500, 1701, and 4500 (for L2TP) and TCP port 1723 (for PPTP) to the corresponding ports on the VPN server.
    4. Configure any firewall in use to pass this traffic.

Maybe you are looking for