How to setup a UDP port forward range

Hi,
We are trying to figure out how to setup UDP port forward range. This is the configuration that we are using.
ip nat pool voip-rtp 10.10.10.3 10.10.10.3 netmask 255.255.255.0 type rotary
ip nat inside destination list 114 pool voip-rtp
access-list 114 permit udp any any range 16384 32767
Where 10.10.10.3 is the host I want to forward the ports 16384 to 32767 to.
This is not working. We use a similar set of commands for TCP range forwarding which work perfecting. Can anyone advise of the correct way to port forward a UDP range.
Damien

thanks for the suggestion.
I tried the same , but still the udp port 514 is not available. when i run nmap tool to scan the ports, the udp port 514 is not available to the external world and hence the syslog msgs i send to tat port is not being received. kindly help me out.
thanks again!!

Similar Messages

How do you set up Port Forwarding for ARD 2.2 in AEB N?

Help,
I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
Any and All help will be greatly appreciated.
P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
Thanks,
Jim

Try the following for each AirPort Extreme ...
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): 3283
o Public TCP Port(s): 3283
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): 3283
o Private TCP Port(s): 3283
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5900
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5900
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5988
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5988
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

How do I configure for port forwarding?

I just relpaced my CISCO E3000 wireless router with an Apple Airport Extreme and need to set up port forwarding. I find the Airport Utility confusing and very limited in capabilities. How do I configure the router for Port Forwarding?

Here's a document that you can follow: https://discussions.apple.com/docs/DOC-3415
However, I ran into an issue with setting this up and had to do a work-around: Custom Port Forwarding Config Not Working

How do you set up port forwarding on an IPad 3 4g connection?

Please let me know how to set up port forwarding on the iPad to point an outside port to one of the devices connected to my iPad hotspot. Thanks.

I'm not sure if the 5.4.1 version that you have will do what you want. Did you mean to say that you had installed the 5.6.1 version?
Sorry, I do not have a PC here handy to test, so you will need to wait for another PC user who can give you step by step instructions.
This article should get you going on Port Forwarding basics:
AirPort - Port Mapping Basics using AirPort Utility v5.x

D-Link 2750B TCP and UDP Port Forwarding

I'm trying to port forward my D-Link 2750B router with TCP and UDP. Whenever I try to make a new rule, it only gives me the option to do one of the two. I make two separate rules, but the port isn't successfully forwarded. Any help?

I tend to like http://www.simpleportforwarding.com/
If your router is supported yet, use http://www.pcwintech.com/router-screen-capture to add the router to the list.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

How to open TCP/UDP ports?

Hi, recently I started poking at my mac, and I blocked some ports from the terminal... My question is how to open them again?
I found a way to block them, but not how to undo it...
Any help, please?

Yes, it is blocked in the whole of middle east. Its like if you buy the device from middle east you wont be even able to use Facetime outside it which is a very poor thing.
I was lucky enough to be told that facetime doesnot work in the UAE just before i could made a bill. I was planning to buy an iphone 5 from Dubai.
Luckily i got a US based version from a local vendor and on that Facetime does work. Just the UAE based models do not have facetime on it working.
Try to search for US based version if you looking out for facetime.

How to setup a WAN port to 100Mb Full Duplex

Planning in getting a 100M WAN circuit. The requirements are to set the TC to 100M Full Duplex mode (No Auto Negotiation), able to set Static IP's. Can this be possible?

Yes, when you setup the TC as a router.. on the internet tab doing manual setup it will allow you to fix the wan connection speed. You can then use the TCP/IP page in the same area to set a static IP.
BTW a cheap $10 switch 10/100 would fix it even if the TC did not have the controls.

Port Forwarding/Router Firewall HELP

I'm trying to use my iSight built in cam with "aMSN" and they give me error messages when I configure. It says I have firewall/port issues to free up or something. Here's what help says to do:
"To do this, open your router web-based configuration (check router manual for details on this). Once you have the web-based configuration open, browse for a setting called "port forwarding" or "port range forwarding" or something similar to that. (This might be found under the advanced features for your router).
Now that you have the port forwarding page open, you will want to set the port forwarding range so that aMSN will be able to accept and send the webcam stream.
Here's an example of how you will set up your port forwarding:
Application: aMSN
Start: 6890
End: 6900
Protocol: Both(TCP & UDP)
IP: xxx.xxx.x.xxx
Enabled: X (Yes/True)
Note: xxx.xxx.x.xxx is the IP of your machine that you are trying to send / receive webcam
If you have a web server open on your port 80, you can try to disable it too, sometimes it helps. "
All I'm asking is how do I get to the port forwarding page to do what they have displayed above? I've tried Apple support topics on the subject and all were irrelevent or only dealt with iChat.
Any ideas? Thank you!

Are you using an Airport? If not, what type of router do you have connected? Each manufactor is different, but should provide the information in their manuals.

Port Forward: Conflicts with all of them.

A bit about me: I am an IT professional 20+ years so I know how to port forward
Situation:
I had a Actiontec Gen1 router. A technician came out the other day and tried to resolve an upload speed issue. As a result, he replaced the ONT and the Router to a Gen2. He got it all up and running and left. My issue started 20 minutes after he left -- when I sat down to reestablish my port forwards.
When I tryed creating my first port forward, I got a warning message about a conflict. I looked at the list and all I had were 3 preset entries:
--Localhost                               TCP Any -> 4567
--192.168.1.100:63145          Application - TCP Any -> Any
--192.168.1.100:63145          Application - TCP Any -> 1
Now, I have done port forwards a lot with my previous router so I was a bit taken back. I did a factory restore on the router and tried to create another port forward - still conflicts.
I knew something was up so I called Verizon. A tech didn't get anywhere so they put me on the phone with Actiontec. They had me try to create a port forward and got the same results. They said the router was corrupt and to have Verizon send me another.
I got the new router in today. While the tech was setting it up in the basement, I quickly tried to create a port forward on it and it worked. I was excited and waited for him to connected it to the WAN. Once he did his thing and established outside connectivity, I tried to create another port forward, and it failed. I asked him to give me back my original Gen1 router so I could use it to troubleshoot. He did with the rule that I call him when I was done.
I got Verizon back on the line and they couldn't help. They then got me on the phone with Actiontec. A couple hours later, they still had no answer. One thing we found though was that they were also not able to connect remotely. They tried 443 and 8080 - nothing worked. I also found that I was able to create UDP port forwards - they worked fine but as soon as I tried any TCP ports, the always came back with a conflict.
Actiontec said the issue was with Verizon and that I should work with them again, so I called Verizon.
I got a great tech who was really going the extra mile instead of giving me the infamous "We don't support that". He too couldn't access the router remotely and we tried just about anything under the sun. For giggles, we decided to put my old Gen1 router back in place. He wanted to reset it to factory defaults so we did. I took a screen capture of my original port forwards though first. When we restored it, it was also stating that there is a conflict when I created a new port forward.
I took a look at my screen capture of my original Gen1 router (this is the one that was originally working over the last year) and I noticed that its 192.168.1.100 entry was set to go to Application - UDP any -> 63146. After resetting it to factory default, Verizon is now setting it to the two setting I documented above.
So now I am questioning Verizons settings that they are pushing down to the router.
My next step was to disconnect it from the WAN completely, do a factory reset and see if I can create a port forward. After doing that test, I was able to create port forwards - TCP, UDP -- they all entered without a conflict. As soon as I connected the router to the WAN and Verizon pushed their settings, it broke again.
The technician did all he could. It is Sunday today and the higher tier techs do not work on Sundays so he said he will have them contact me tomorrow. I sure hope they can resolve this!
So this is the deal:
-Go into your router and try to create a port forward. Pick anyone from the list that includes a TCP port. If you get a message stating there is a conflict, you are most likely in the same boat as I. I would bet anything that Verzion cannot access your router remotely too.
-If you ARE able to create tcp port forwards, then I would highly suggest that you do not do a factory reset. When doing so, I would bet anything that you will no longer be able to create those forwards.
-if you are able to port forward fine, do me a favor and tell me what your 192.168.1.100 port forwards are that Verizon throws in there. If I were to bet, I would bet that the ones that work are set for Application - UDP any -> 63146; If they don't work, I would bet that they are set to:
--192.168.1.100:63145          Application - TCP Any -> Any
--192.168.1.100:63145          Application - TCP Any -> 1
Anyway, that is my story. I spent a whole weekend with Verizon and I am still not working. Any data from the community will be helpful. I want to know if this is a global issue or if it is only affecting me. I have had this happen with 3 routers, 1 gen1 and 2 gen2's.
Thanks for your help in advance.
Solved!
Go to Solution.

Finally - a solution. *wipes brow*
First off, I want to state that the networking group located in the Syracuse - all the other tech need to visit them for a week and learn:
- How to talk to a customer (what to say and not to say)
- How routers work, how they can be configured, and what they are capable of. Basically, learn a bit about networking.
- Listen to the customer - they may know more than you.
Anyway, thank you very much Syracuse Team!
While working with the tech (this guy was awesome and actually listened to me about the automatic port forwards that were appearing from Verizon), he decided to to use the RJ45 network WAN connection in addition the COAX. My setup was setup to only use the COAX connection - it's been that way for over a year now.
The tech turned set it up so that my data was going through the RJ45 and the TV was going through the COAX. When he did this and we reset the router to factory, the Verizon forwarded ports were no longer showing up and as a result, I was able to create ports at will without conflict.
So beware all of you who are setup to only use the COAX connection. It appears that one of my set top boxes was now throwing in the port forwards that I noted in the original post and those were screwing everything up. Go figure that, eh? I wonder who said that some 14 tech hours ago?
Anyway - if you are unable to create port forwards without a conflict error, call up Verizon and tell them the issue. If they act like they never heard this, tell them about my situation and that adding the RJ45 connection in addition the COAX is the solution. Just make sure you reset your router to factory when they are done or else those odd port forwards won't clear.
Peace out and good luck!

Port Forwarding for Filemaker Pro on Airport Extreme

I really don't know what I'm doing - I'm trying to get my Instant Web for Filemaker to work - It was set up on my MacBook Pro and then I moved everything to this iMac and now it's not working. I do know that the port for FM Pro is 591. I have it set up in FM Pro sharing and it gives me an IP address that should work. Which, by the way, it does inside my network, but not from outside. So, I need to know how to set up the Port Forwarding on my Apple Extreme to make this work.

I don't use FM, but do port forwards on AE for my private website using DynDNS
Go to Applications >> Utilities >> AirPort Utility >> pick your AE and click Manual Setup button
Go to Advanced >> Port Mapping >> click the PLUS to add a new port fwd
Leave the Service drop down as is
Set public TCP and private TCP fields to 591
Set the private IP to the IP address of your iMac as your AE assigned it - I assume that your AE will have 10.0.1.1 and your iMac will be 10.0.1.X - not sure whether you use DHCP and let AE do the work or manually assign private IPs yourself
Give it a description in the next window. Not sure about advertising via Bonjour - I'd try both.
If you don't know what private IP your iMac has, go to applications >> utilities >> Terminal app and type this command: ifconfig
You'll see something like this. In my case, since I use Ethernet to connect my mac to AE router, the en0 is my active connection and my private IP is 10.0.1.12 as shown below. If you use WiFi, you'r main connection will be en1
Last login: Sun Mar 13 20:52:12 on console
Mac-mini:~ jiri$ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
inet6 fd75:7419:92a9:cab8:226:4aff:fe15:f970 prefixlen 128
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0 mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:26:4a:15:f9:70
inet6 fe80::226:4aff:fe15:f970%en0 prefixlen 64 scopeid 0x4
*inet 10.0.1.12* netmask 0xffffff00 broadcast 10.0.1.255
media: autoselect (1000baseT <full-duplex,flow-control>)
status: active
en1: flags=8823<UP,BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500
ether 00:26:08:ec:4f:fa
media: autoselect (<unknown type>)
status: inactive
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
lladdr 00:26:4a:ff:fe:15:f9:70
media: autoselect <full-duplex>
status: inactive
utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
inet6 fe80::226:4aff:fe15:f970%utun0 prefixlen 64 scopeid 0x7
inet6 fd00:6587:52d7:85:226:4aff:fe15:f970 prefixlen 64
Mac-mini:~ jiri$
Let me know, if it works...

Port Forwarding with Port Translation RV042, RV016, RV082

This is a feature request for the Linksys RV series Routers. Currently, it appears that the Cisco/Linksys RV042, RV082, and RV016 only support port forwarding and 1-to-1 Nat. One item that I find very helpful with customers is port forwarding with port translation. I am requesting that this feature be included with a future firmware relase for these RV series routers.
Here is an example of the request.
Take an incoming service request on a TCP or UDP destination port and forward it to an internal IP on a different TCP or UDP port. For example, customer A wants to allow different machines on the internal network to receive Windows RDP connections inbound. To make PC maintenance identical between the internal machines, the customer does not want to change the listening port for RDP on the individual PC workstations through the Windows Registry. The customer also does not want to dedicate separate IP's to each machine in a 1-to-1 NAT setup. The only option is to have remote connections to each of these PC's to use a different destination port. So, for example, PC one could be reached on TCP port 5151, PC two on TCP port 5152, and PC three on port 5153. This requres a firewall that is able to translate each of these connection requests to a different internal IP on the default RDP port (TCP 3389). So, the following setup is required:
Port Forwarding with Port Translation:
Router External IP on TCP port 5151 ---> forwarded to PC One's internal IP on TCP 3389
Router External IP on TCP port 5152 ---> forwarded to PC Two's internal IP on TCP 3389
Router External IP on TCP port 5153 ---> forwarded to PC Three's internal IP on TCP 3389
There are several comparable "small business" class router competitors to the RV042, RV082, and RV016 that will perform this port forwarding with port translation process without incident. Unfortunately, these Cisco/Linksys small business routers will not accomplish this task currently.
Please implement this feature in a future firmware release.
Thanks!

Excellent. I see this now. None of our customers actually use the UPNP feature, so we never realized that Port Forwarding with Port Translation features existed on this page along with the ability to enable or disable UPNP.
Perhaps, in the future, this functionality could be moved to and incorporated into the port forwarding page which seems to be a more logical location.
In either case I'm very happy to know that this feature is available on the RV's.
Thanks for your assistance.

EA4500 Max number of Port forwards

Hi All,
Background: currently have a WRT320N, thinking of upgrading to an EA4500 assuming ONE feature has been improved: Port Forwarding.
Scenario: Currently I have a WRT320N router, and while it "does everything we need" it has one limitation that is now getting in the way: limitation on number of forwardable ports. In the port forwarding panel, it has 15 total rows: the first five rows can be enabled for specificaly named services (SMTP, FTP, etc). The last 10 rows are fully customizable in that we can set the name, ports and protocol.
The problem is that of the 13 total ports I currently need to forward, only ONE of them is listed in that fixed list. So, sadly, I can only use one of those first five rows. I've now filled the remaining ten custom rows, and still have need for two additional ports (for now, may need more down the road).
Trying to get creative, I figured maybe I could just spill over to the Port Range Forwarding page and add a row or two there. The only problem: it's buggy. I've found that if the Single Port Forwarding list is filled, then the Port Forwarding Range entries don't work properly. For example, if I wanted ports 12345 and 12346 forwarded to 192.168.1.5, they work fine with two single port forwarding entries. However, if I delete those, add two other port lines I need forwarded (the single list being full again), and add a port forwarding range 12345..12346, they don't work properly, ports just are closed. Only the singles work, the ranges don't.
Question: Has the EA4500 resolved this issue and allow for either more lines (i.e. 20 customizable entries instead of 10), or, better, does it just have an [Add Entry] button to allow for additional rows to be created? In today's day and age, where one single device (such as an Xbox) can take four rows, a 10-row limit is pretty sparse. Comparing it to some competitors, for example the D-Link DIR-825 (aging, but still great) allows you to add as many as you want.
I realize "expensive" firewalls like SonicWall's have virtually unlimited customization, but I don't need many of the additional features and don't want to spend $350 on a "high-end" firewall to solve the problem of needing two more ports open.
Thanks to any help you can give!
-Dan
Solved!
Go to Solution.

If it is of any value, you can view the EA4500's GUI here to have a feel of the Admin Interface.
http://ui.linksys.com/files/EA4500/2.0.36/
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

Port Forwarding Cisco firewall

Hi,
In Cisco Firewall 2900 seires
trying to use port forwarding
but not communication please help me.
Reg
Manoj.

: Saved
: Written by enable_15 at 23:01:39.772 UTC Thu Jan 30 2014
name 10.10.70.X.40 FinalPdf
name 201.256.x.x Youfinalip
interface Ethernet0/0
nameif YOUB
security-level 0
ip address 201.256.x.x.254.82 255.255.255.248
interface Ethernet0/2
nameif inside
security-level 100
ip address 10.10.70.X.1 255.255.255.0
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
ftp mode passive
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group service ftp tcp
port-object eq ftp
port-object eq ftp-data
port-object eq 14147
object-group service any tcp-udp
port-object range 1 65535
object-group service DM_INLINE_TCP_1 tcp
group-object ftp
port-object eq ftp-data
access-list EXEMPT extended permit ip 10.10.70.X.0 255.255.255.0 192.168.10.0 255.255.255.0
access-list EXEMPT extended permit ip 10.10.70.X.0 255.255.255.0 10.70.0.0 255.255.0.0
access-list EXEMPT extended permit ip 10.10.70.X.0 255.255.255.0 192.168.0.0 255.255.0.0
access-list inside_access_in extended deny object-group TCPUDP any any eq domain
access-list inside_access_in extended permit ip any any
access-list YOUB_mpc extended permit ip any any
access-list YOUB_access_in extended permit object-group TCPUDP any interface YOUB inactive
access-list YOUB_access_in extended permit tcp any host Youfinalip object-group ftp
pager lines 24
logging enable
logging emblem
logging asdm-buffer-size 512
logging buffered debugging
logging trap debugging
logging history debugging
logging asdm debugging
logging device-id hostname
logging debug-trace
logging ftp-bufferwrap
logging ftp-server 10.10.70.X.251 firwall/ firwall firwall
logging class auth trap emergencies asdm emergencies
mtu YOUB 1500
mtu SIFY 1500
mtu inside 1500
mtu WAN 1500
mtu management 1500
ip verify reverse-path interface YOUB
ip verify reverse-path interface inside
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-645.bin
asdm location Testpdf 255.255.255.255 inside
asdm history enable
arp timeout 14400
global (YOUB) 1 interface
global (SIFY) 1 interface
nat (inside) 0 access-list EXEMPT
nat (inside) 1 10.10.70.X.0 255.255.255.0 dns
static (inside,YOUB) tcp Youfinalip ftp Testpdf ftp netmask 255.255.255.255
access-group YOUB_access_in in interface YOUB
access-group inside_access_in in interface inside
route YOUB 0.0.0.0 0.0.0.0 201.256.x.x.254.81 1 track 1
route inside 0.0.0.0 0.0.0.0 10.10.70.X.1 10
route WAN 10.60.0.0 255.255.255.0 10.70.100.38 1
route WAN 192.168.8.0 255.255.255.0 10.70.100.38 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication http console LOCAL
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 0.0.0.0 0.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sla monitor 100
type echo protocol ipIcmpEcho 4.2.2.2 interface YOUB
num-packets 3
frequency 10
sla monitor schedule 100 life forever start-time now
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
track 1 rtr 100 reachability
telnet timeout 5
ssh scopy enable
ssh 10.10.70.X.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username cisco password 3USUcOPFUiMCO4Jk encrypted
class-map YOUB-class
match access-list YOUB_mpc
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
description ftp
class inspection_default
inspect dns preset_dns_map
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect ftp
class class-default
ips inline fail-open
policy-map YOUB-policy
class YOUB-class
ips inline fail-open sensor vs0
service-policy global_policy global
service-policy YOUB-policy interface YOUB
smtp-server 10.10.70.X.18
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:aace81256bc60bc50469f80cb0c4641a
: end

Port forwarding in 6th gen airport extreme

How do you set the port forwarding in the 6th gen airport extreme?

I am assuming that the AirPort Extreme is set up to function as your main router handing all network services....but, since it is dangerous to assume anything.....so, the first requirement to check is to make sure that your AirPort Extreme is configured as the main router on your network.
On your Mac, open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme, then click Edit in the small box that appears
Click the Network tab at the top of the next window
The setting for Network Mode must equal DHCP and NAT. Is that what you see? Do not make any changes at this point.

I need Help setting up port forwarding for my foscam FI8910W.

I am currently on Mac OS X 10.7.5. My ISP is verizon FIOS and I have an Actiontec MI424WR router with the wireless turned off. I have an AirPort Extreme running from the actiontec router for my wireless network. First of all I need to know if I should plug the Foscam into the actiontec router or the Airport Extreme? Then I need to know if I should set up the port forwarding on the Actiontec or the Airport Extreme. Lastly I need detailed instructions on how to set up the port forwarding. Hopefully someone has a solution. Thanks

OK, and what sort of help do you need?

How to setup a UDP port forward range

Similar Messages

Maybe you are looking for