Z10/BB Link support for GroupWise

I currently use a Bold 9780 and sync my contacts with my GroupWise Address Book on my laptop. It has worked like a champ for 3 years, now I want to purchase the Z10, but Im afraid I won't be able to do that anymore. I'm not in an enterprise environment, just personal use. Anyone have experience with using BB sync with a Z10 and GroupWise?
I'm assuming I can still setup an internet email account and get my GW email on a Z10 like on my 9780? Any info would be appreciated. Thanks.

You could try reinstalling Link, it could be link or it could be your PC or even your phone. Link has issues and for that reason I do not use it so I cannot tell you about Link.
If you reinstall Link and your issue is still there you can restore your phone to see if it is your phone.
To restore your phone: tap the Settings App, scroll down and tap Security and Privacy, tap Security Wipe, tap the blank box and enter blackberry. This wipes out all data, which usually you would save to Link first if Link was working.
If you restore your phone and your issue with link is still there, then you can remove Link and install BlackBerry Device Manager. https://swdownloads.blackberry.com/Downloads/contactFormPreload.do?code=A8BAA56554F96369AB93E4F3BB06...
You can save most files from your phone to your PC with BB Device Manager.
You can also BackUp your phone with BlackBerry Protect.
http://worldwide.blackberry.com/ap/protect/
This is already in your phone, found here: Settings, BlackBerry Protect. Turn ON and you need to turn on Location Services also, but you do need to turn on Traffic or Ads.

Similar Messages

Dropbox Link Support for ePrint

It would be perfect if a dropbox link to a document could be emailed to ePrint from my iPad/iPhone/PC and the ePrint process would print the linked document in the same way that it prints an attached document or PDF.
It would be a simple process for the ePrint server to recognize it as a Dropbox link, open the document at the link and print.
Mike

Hi MCB,
ePrint works through sending the email through the internet so the location of the document which should be in your local drive will not be accessible from the ePrint server. I would be concerned if the server is able to access my files.
This is certainly a good feedback.
Thank you.
I am an HP employee
**** Please mark the post that solves your problem as "Accepted Solution" ****

Bridge/Adapters for Groupwise(?)

Hi all,
I got a question from a potential customer about if it is easy to link the standard PIM module apps of o9iASwireless with a Novell Groupwise infrastructure. I know that Exchange and Lotus Notes (Domino) are supported. I don�t know the technical details about Groupwise. Do we have to build adapters/bridges ourselves in this case?
Thanks in advance for the reply.
Regards Thomas

Groupwise seems to be using open standards for e-mail and supports MAPI. They also explicitly mention that all data is exposed via 'open standards', which of course gives no indication of the effort involved. I am deferring the matter of eventual collaboration suite support for Groupwise to the expert on the matter - you should hear from him soon.
Regards,
Deepak

GroupWise 7.0 API Gateway is supported for Exchange 2007?

Can someone confirm that GroupWise 7.0 API Gateway is supported for Exchange 2007?
I found a note in a guide that stated it was not YET supported as of 1/27/2008.

bwalker2,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for furth

I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for further assistance. It doesn't take me to customer support, but does take me to a screen which states. "Error "This serial number is not for a qualifying product." I've checked my account and the product serial number is associated with my account., so I don't see any problem. I have not been able to find a resolution to this problem, so I hope that someone can point me in the right direction. Thank you!

update directly, Product updates

The partner transaction manager has disabled its support for remote/network transactions....When inserting during trigger in linked server

Hi All,
I am getting below error while inserting into Linked Server (sql2012) thru trigger from sql2008 ....However if i insert the same thru Store Procedure it is inserting successfully....MSDTC service is started on both sql server machines....also both machines
rebooted....but still i am facing this error.
OLE DB provider "SQLNCLI" for linked server "XXX.XXX.XXX.XX" returned message "The partner transaction manager has disabled its support for remote/network transactions.".
Msg 7391, Level 16, State 2, Procedure ins_test, Line 11
The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "XXX.XXX.XXX.XX" was unable to begin a distributed transaction.
Could assist to resolve.
Regards
Shehzad

Hi SHzKhan,
According to your error message, we need to verify if you configure the MSDTC correctly, When you have more than one SQL Server involved in a Distributed Transaction, you need to make some changes to the default configuration of MSDTC for these distributed
transactions to succeed. There is a detail about recommending MSDTC settings for using Distributed Transactions in SQL Server, you can review the following article.
http://support.microsoft.com/kb/2027550/en-us
There is a similar issue about error 7391, you can refer to the following link.
http://dba.stackexchange.com/questions/30235/msg-7391-distributed-transactions-dtc-on-sql-server
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Any support for OneDrive like DropBox has for file link storage?

Trying to add OneDrive to my File Link servers but no support for OneDrive yet. Any plans to add it to ThunderBird?

Perhaps Microsoft will write an add-on as the community has done for dropbox.

IBooks support for auxiliary content and linking?

I have a couple of questions for the iPad/iBooks owners out there that I hope can answer them for me. I'm in Canada, so I won't be getting an iPad for at least another month or more (also waiting for the 3G), and I don't have any readily available access to one to try for myself.
1) This is a bit technical, but I'll just come right out and ask it. How is iBooks support for auxiliary content (non-linear content documents, in ePub parlance)? Does it do anything special with it (pop-ups, tooltips, side bars, slide-out panels, etc...), or does it just ignore it and lump it in with the rest of the "real" content?
From a cursory glance, it looks like Microsoft has done something similar with their proprietary .LIT ebooks (which are apparently based roughly on the same specs as ePub, i.e. XHTML and CSS). But I get the feeling this functionality has gone the way of multi-angle DVDs, which is to say no one bothers with it.
2) And my next question comes from having tried various ePub readers on the iPhone. None, but Stanza seem to even get this remotely correct (some completely ignore them, some render them but don't do anything with them, and one attempts to do something with them but spits out errors). I have an ePub that uses footnotes heavily (in the dead-tree version they're footnotes, in the ePub they're essentially endnotes). The ePub in question doesn't have chapters, but it has been broken up into multiple chunks (multiple XHTML content documents behind the scenes). The footnotes are accomplished by linking (and back-linking) a la standard HTML hrefs between said chunks. I assume iBooks is Webkit-based and this isn't a problem at all (i.e. it's just like using a web browser in that regard)? Also, am I correct that there's no "back" button/function except in the TOC?
3) Based on all the PR and guided-tours, etc..., I presume iBooks strictly conforms to a paginated view? There's no scrolling layout/view, and by extension a way to do auto-scrolling?
4) How does text-to-speech work? Will it read the whole book, or does it only read, for instance, your current selection?
Thanks!

Jon Walker wrote:
How is iBooks support for auxiliary content (non-linear content documents, in ePub parlance)? Does it do anything special with it (pop-ups, tooltips, side bars, slide-out panels, etc...), or does it just ignore it and lump it in with the rest of the "real" content?
It isn't handled by the reader at all. It is handled by the ePUB generating application. Non-linear content, if included, is usually ordered as found, i.e., it uses a left-most, top-to-bottom ordering algorithm. This usually means it ends up at the end unless aligned to the left edge of the source document above the inline content or interspersed between other non-linear and linear segments if also included. To ensure content displays with associated text, it is normally anchored, inline, just before or just after the desired text. Some generating apps indicate an ability to perform left/right alignments with text wrapping around inline images but I have yet to personally try this.
You'll have to excuse my ignorance, Jon, but I barely understand anything you wrote just then. I've only been playing with ePubs for the last several days, so I still have a very limited understanding of the specs, and have only a small collection of samples (which are very simply constructed), so I don't know the full breadth of what's possible in ePub. For instance, in my example ePub, one content document ends at the end of a paragraph, and the next document begins at the start of the next paragraph.
Please correct me if I'm wrong, but my current understanding of "content documents" are that they're essentially XHTML pages, and the only reason they're broken up inside the container is either for semantic reasons, to reduce initial load times, or to support older readers. And basically a reader will load them sequentially when it comes time to display them (i.e. next chapter, via a link, etc...), assuming in the 'spine' section they're listed as being linear (either explicitly or by default).
The only examples I've seen where a particular 'itemref' has had its 'linear' attribute set to 'no' are things like covers and footnote sections (I believe the IDPF also uses the example of an answerkey in a textbook). I guess it's a two-fold question. I'm having a hard time envisioning what other elements in a book one would want to mark as non-linear. I guess things like a glossary, a table of illustrations, an index, etc... (i.e. stuff that's important to the book, but you wouldn't want to read linearly with the actual content of the book). I should point out I write Windows apps for a living, and have no understanding of how the publishing industry works, or what goes into the making, designing, or laying out a book.
And second, it seems the specs leave it completely up to the reading device to determine what it wants to do with these non-linear documents. Hence, why I asked how iBooks handles them.
You lost me when you started talking about edges, anchoring, and wrapping. To me, that sounds more like formatting decisions one would have to make inside an XHTML document. But I'm always open to being schooled on a subject.
I have an ePub that uses footnotes heavily (in the dead-tree version they're footnotes, in the ePub they're essentially endnotes).
I believe this is essentially correct. Since ePUB files have no defined pages, the footnotes become endnotes the the specific generating application determining if they display at the end of the book or at the end of the chapter. E.g., Since Adobe InDesign requires segments (cover page, title page, chapters, etc.) be generated as independent documents with are later assembled as a "book," I believe its "endnotes" automatically display at the end of the individual documents which make up the book while other applications use inline tags to break up a single "book" document into independent XHTML documents but place all "endnotes" at the end of the "book" rather than within each XHTML document created from the tagged segment where found in the main source document.
From what I've seen in the specs, it makes sense that, with the way the specs are at this time, the onus is on the generator to figure out how to use and where to put the footnotes. Without a standard way of defining them, there's no way for a reader device to know what it's looking at is a footnote or not.
I was just hoping in my heart of hearts that Apple had somehow solved the problem. After all, they were the ones throwing the word "magical" around when describing the iPad.
As a side note, would you know if iBooks properly supports the page-break-before and page-break-after CSS styles?
Based on all the PR and guided-tours, etc..., I presume iBooks strictly conforms to a paginated view? There's no scrolling layout/view, and by extension a way to do auto-scrolling?
I've not found a way to scroll but then I prefer paging through the document with a tap than continuously "swiping" and so have not looked all that hard.
Yeah, not a dealbreaker by any means. Just something I've started playing with on my iPhone reader, and have kinda started to enjoy. But I'll make sure not to get too comfortable with it now.
As for the text-to-speech (which I wouldn't use anyway), I guess it's using the VoiceOver APIs that Apple includes in the SDK(?), and, no, it won't automatically read a whole book for you, but it will read at most a page at a time. Apparently, this is their work-around for the same grief that Amazon got with the Kindle's speech feature.

BPEL SE support for flow synchronisation links.

Hi all,
do you know whether BPEL SE and NB are going to offer support for flow synchronisation links anytime soon?
Thanks,
razvan.

Hi,
- Flow with link is supported, though not supported by the GUI.
- forEach can also be rewritten to bpel 1.x with help of this blog: http://clemensblog.blogspot.com/2006/03/bpel-looping-over-arrays-collections.html
Kind regards,
H

Support for ShopBlackBerry purchased devices?

I am on ATT and purchased a BBZ10 STL100-3 from shopblackberry.blackberry.com and am having problems. The support webpage located at: https://store.shopblackberry.com/DRHM/store?Action=DisplayContactFormPage&SiteID=bbrryus&Locale=en_U... says --------- (snip some) Technical Support Get expert phone support for your BlackBerry smartphone purchased through ShopBlackBerry. Call us at 1-866-957-0761* * Telephone numbers and hours of operation are subject to change. Any applicable local and national telephone rates may apply. Toll free support phone numbers may not be accessible by mobile phones in all countries. Please check with your carrier for availability and / or charge rates. --------- Sounds simple enough. However when calling at 5:20pm CST I spoke with a female named "Charlie" so stated: "I'm sorry sir. You must go through your provider for support. They will give us a "Validation" code so that we can help you and you won't be charged..." So which is it? Is the webpage wrong and I have must use ATT support for a Z10 I purchased via the BlackBerry website, or is the CSR incorrect? My problem: I've changed my security question and reset my password on the bbid.blackberry.com website but can't login via my Z10 anymore. The Z10 keeps saying "incorrect password" and the security question it asks is one that I've changed. Thanks. -- James

aracoma481 wrote:
In regards to your comment that I would probably have to get support from my provider, I'm unsure why the service provider would be involved. BBID is a service, but a service provided by BlackBerry. Isn't the carrier (ATT) just be a transportation method for the BBID sign in data? IE if one takes the ATT sim out of the Z10 shouldn't one be able to still sign in one's device to a BBID via the wireless connectivity of the device? (I don't know BlackBerry's relationship or interdependence (or co-dependence) with carriers but I'm willing to learn.)
In which case, please see this "sticky" post, along with the threads to which it links (especially the formal support one), for helpful information to guide you as you proceed:
http://supportforums.blackberry.com/t5/Social-Lounge/How-This-Site-and-Formal-Support-Work/td-p/2540...
Hopefully, this information will be of use to you.
aracoma481 wrote:
1. I have successfully reset my BBID password and security question on the BlackBerry website. (I believe I was required to delete the BBID on BlackBerry's site to accomplish. As a side note I find it strange I have to sign in via a BBID just to back up my device via a USB cable to my Mac but that's another message.)
If the red part is indeed true (you say only that you "believe" you had to do it...I cannot therefore know if indeed it is accurate), then you must WIPE your device. It has been reported here that destruction and recreation of the BBID causes it to not be recognized when re-integrated to the device unless a device WIPE is done, even if it was recreated with the exact same credentials. My guess is that there is some sort of hidden "token" that is changed in the process, and that token no longer matches, and the only way to clear it from the device is a device WIPE.
Also, I didn't know that there is such an option to do that...the method I've known is via a link that came in the original BBID registration email, but it may have changed as I've never actually had to do what you are doing.
Cheers, and Good Luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Z10 and Link

Already have latest software update on Z10. Link indicating Update available for SAME software version. Why? When i try to update I get fatal error. How to I get rid of the "Software Update Avilable Message"

Hi umeyber and welcome to the BlackBerry Support Community Forums!
After you updated your BlackBerry Z10, did you remove any of the pre-installed applications? If you remove a pre-installed application, the BlackBerry Z10 will indicated a software update is available, to install that missing application.
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Can you please put me in touch with the support for the trial copy of adobe acrobat XI pro which I had tried out on March 15 for 30 days. I have been trying to cancel since the cost is too much and Acrobat Reader is OK for me. I can't find uninstaller.

Can you please put me in touch with the support for the trial copy of adobe acrobat XI pro which I had tried out on March 15 for 30 days. I have been trying to cancel since the cost is too much and Acrobat Reader is OK for me. I can't find uninstaller.
I have had to erase my disk since then with trouble with Apple Store not recognising my machine and the reload from Time Machine has given complications . Can you please cancel my trial and return my Trial money.

If you paid for what you used then it was not a trial.
Look thru the following links and use the chat option if required for your situation:
Cancel your membership or subscription | Creative Cloud
https://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
https://forums.adobe.com/thread/1703848
Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Microsoft - Worst Customer Support ever! Where can I get a decent Microsoft customer support for Windows in the UK?

I have just tried to created the ISO of the operating system I am using for last 5 years, Windows 7 Ultimate. I remembered that on Microsoft website are quick links dedicated exactly for that purpose. However, when page loaded I've seen this:
The Page or File You Requested Could Not Be Provided
The resource you are looking for has been removed, had its name changed, or is temporarily unavailable.
HTTP Error 404 - File or directory not found.
If you purchased your Microsoft Windows software from another source, but have the software key provided by Microsoft, you can download the Windows operating
system from the following website:
Windows Downloads
When I have clicked on the download link it took me to the webpage which seemed everything going for it. 3-step guide, including the product code and language. Brilliant! I thought, until after filling all the details I have clicked on 'Next-Verify
Product Key' than I faced a message:
Validating your product key. This may take several minutes. Do not refresh the page or select back, doing so will cancel
the request.
When finished, a message pop up: that the language provided is not compatible with the product key - try different language. Interesting, I am using this product last five years but is not compatible with English? I must have been a fairy then
to be able to make it work for all these years. Then it got better.
I have tried it again with a different message in the end:
System Error
We encountered a problem with the product key you provided. Please visit the Microsoft Support Contact Us page
for assistance. Refer to Message Code 715-123130.
So I have contacted Microsoft. Contacting Microsoft is an experience itself and half.
Being Microsoft certified, I used the link provided for IT Pros. I click the link provided and the page started loading..... and still loading now....
So I have decided to call the customer support as you would normally do with any other organisation. To actually get to the phone number, illogically placed, took me a few loops around MS website. Once called, I got to speak to very efficient lady on reception
who kindly switched me to the Technical Support. That's going well, I thought.
Once the connection has been made, I felt that MS technical support is based in submarine 3 miles under water in Japanese sea. All I could hear was the very familiar sound of water of modern Voice over IP connection dated back in 2003 and a male voice (but
by the sound of it it might have been a whale) asking me my name. Unsurprisingly, the connection was interrupted several times when I tried to describe my issue I am having, and eventually I was disconnected.
Still not put off, I made another attempt to contact MS customer service. This time I have been talking to a woman, seemed a little bit closer, maybe Bristol waters? Still in the submarine but not so deep. Also here I was asked my name AND surname; then
I have described my intentions and the difficulty I am having in succeeding it. The woman on the phone didn't get at all what I was saying. I had to literally spat out word by word what the problem is. (Luckily, I have many years of experience supporting IT
users over 60 years of age so it didn't take so long to explain it to her.) My thought just was, oh my God, how can she help if she didn't even understand the issue. Then the phone went completely dead for 10 mins. When it came back to life, I could hear clear
sound of fishing boat passing by until a voice, I assume the same woman, apologised for the delay. And now - the best is coming:
1) I was informed that the website is being tested, under construction and that doesn't work properly.
Comment: How can Microsoft, one of
leading organisation in technology, do testing of website 'live'? Quite clearly, that is BS.
2) I was advised to obtain the ISO image from 3rd Party website!!!! On question if she can give me the link to any 3rd party website the answer was NO.
Comment: Seriously, so here we are in 21st Century, dealing with almost the GOD in IT and the recommended solution is - to obtain help for the God's product from UNKNOWN 3rd Party. Brilliant! If this is the case, where Microsoft is exactly heading to???
3) She cannot tell me when the issue of non-working website will be sorted and I should go and buy the copy of Windows; than I will be able to do the ISO.
Comment: Well, that's what I call a professional advise from Microsoft representative. The fact that I do have the physical copy was totally ignored, the fact that I have been running the system for several years have been totally ignored the whole point
of this exercise (to cut down the time making ISO using Microsoft website) was totally ignored.
When I started asking questions to clarify what has been said I have been continuously interrupted.
To my question whether MS customer service representative have been trained to interrupt customers I have been told that I am talking over her. I asked her name, which she told me but I didn't catch and therefore I have asked if she could spell it. On that
point she hung up.
Well done Microsoft! And now I want to know just one reason why I should buy your products when the support, in case of problems, is not existent.
Does anyone know where I can get a decent customer service that can resolve my issue better than smudge it ?
Thank you.
Lenka Novakova
Microsoft Certified IT Professional Enterprise Administrator
Microsoft Certified Solutions Associate

Just having the same issue there, which is real not fun, I have not tried to contact them, but looking at your experience I am not sure if I should.
My key comes from the back of a laptop o so I guess that would be a W7
OEM, and that could explain why you can't download a ISO from their website, would that also your case ?
Also could it be because we are attempting to get the ISO after the product became EOL ?
http://windows.microsoft.com/en-us/windows/lifecycle
Maybe I will give a go with the customer care people and maybe I will get a right answer ;)
Will keep you posted

How do I get support for Windows 7 on, and a W7 backup disk for, my new ThinkPad?

I know these have got to be stupid questions, since I am sure that they have to have been asked before (unless they are clearly explained somewhere that everyone else has found, and I am somehow completely missed it), but I did search the forums and was surprised NOT to find any info on getting Windows 7 technical support after it was factory installed in a month-old Thinkpad. I wonder if the apparent defects in my W7, or maybe a different problem in my browser, could be affecting my ability to search to forums?
I believe that my Windows 7 is defective, but calling Lenovo, they just talked about reinstalling Win7 from the partition, which makes no sense, if my W7 copy is defective, wouldn't the copy in the partition be defective too? My mom said she ordered a $20 W7 backup disk with the PC, but I never received it, and now Lenovo tech tells me those aren't actually available, and she must have confused it with the W7 upgrade disk, which didn't sound right, since I thought the upgrade disk was over $100, and I never received that one either anyway. If the W7 that was factory-installed is defective, I am assuming it's a copy of the same one in the partition, so that partition recovery is not feasible, is there any way to reorder a W7 re-install disk that will still register as Genuine Windows 7 on a Thinkpad? Now when I search the Lenovo site, I cannot find ANY W7 disks of any kind, neither a backup for factory-installed W7, nor for upgrade from a prior Windows version. Does anyone know how I could go about re-ordering the W7 backup disk when it appears to be missing from the online catalog? Unless this too is a defect in my browser search: can someone give me the link to page where I could select and re-purchase a W7 backup disk?
It has been a few years since I had a new PC, but I have never even heard of one before that did not come with instruction manuals and OS and support disks, and did not provide any tech support for its own factory-installed software or Windows, at least during the first few months of ownership. Where do new Thinkpad owners turn for individual W7 software support, since Microsoft swears it is Lenovo's responsibility to support W7 under its OEM license, yet Lenovo swears they only support hardware? It almost seems that new users are expected to know everything already, or be initiated enough with the product to know exactly what your problem is and what's causing it, in order to find an online fix. Who do you call if W7 or Lenovo software (but not an ISP issue) appear to be doing something to prevent online access, but there are no discernible hardware issues? Where do you call for individualized W7, as well as Lenovo software, support, especially after no one online has ever heard of your specific issues and has no workable ideas for fixing them, or when your problem prevents you from getting online at all?
Thanks so much

http://www.apple.com/support/bootcamp/
Boot Camp Assistant is already on your computer. You just need to buy Windows. Read the instructions and help files very carefully. Back up your data before taking on this task.

The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU - SharePoint Foundation 2013

After sucessfulling installing the SharePoint Foundation 2013, when i try to access the Secure Stored Service Application i get the below error
11/16/2012 18:13:02.84 w3wp.exe (0x1774)                       0x15E8 Secure Store Service
Secure Store                  g0n6 High    The trial period for this product has expired or this feature is not supported in this SKU. b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84 w3wp.exe (0x1774)                       0x15E8 SharePoint Foundation
General                       8nca Medium Application error when access /_admin/sssvc/ManageSSSvcApplication.aspx, Error=The
trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.   at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1
operation)     at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy
proxy, String& errorMessage)     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()     at Microsoft.Office.SharePoi... b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84* w3wp.exe (0x1774)                       0x15E8 SharePoint Foundation
General                       8nca Medium ...nt.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.OnLoad(EventArgs
e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84 w3wp.exe (0x1774)                       0x15E8 SharePoint Foundation
Runtime                       tkau Unexpected Microsoft.Office.Server.ProductExpiredException: The trial period for this product
has expired or Secure Store Shared Service is not supported for this SKU.    at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1 operation)
at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy
proxy, String& errorMessage)     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()     at Microsoft.Office.SharePoint.ClientExtensions.SecureSto... b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84* w3wp.exe (0x1774)                       0x15E8 SharePoint Foundation
Runtime                       tkau Unexpected ...reAdministration.ManageSSSvcApplication.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84 w3wp.exe (0x1774)                       0x15E8 SharePoint Foundation
General                       ajlz0 High    Getting Error Message for Exception System.Web.HttpUnhandledException
(0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Office.Server.ProductExpiredException: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.
at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1 operation)     at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()
at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy proxy, String& errorMessage)     at Microsoft.Office.Sha... b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84* w3wp.exe (0x1774)                       0x15E8 SharePoint Foundation
General                       ajlz0 High    ...rePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()
at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.Htt... b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84* w3wp.exe (0x1774)                       0x15E8 SharePoint Foundation
General                       ajlz0 High    ...pApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.86 w3wp.exe (0x1774)                       0x15E8 SharePoint Foundation
General                       aat87 Monitorable b3b6e19b-7de2-e016-ad32-0fc975829ef0
Is it a bug or any issue in configuration?
Raghavendra Shanbhag | Blog: http://moss-solutions.blogspot.com
Please click "Propose As Answer " if a post solves your problem or "Vote As Helpful" if a post has been useful to you.
Disclaimer: This posting is provided "AS IS" with no warranties.

Hello
something should be related wuith this service, take a llok at my visual studio output whne I try to deplay and autohosted sharepoint app: (anyone can help)
1>------ Build started: Project: MySharePointAppWeb, Configuration: Debug Any CPU ------
1> MySharePointAppWeb -> C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\bin\MySharePointAppWeb.dll
2>------ Build started: Project: MySharePointApp, Configuration: Debug Any CPU ------
2>C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\Web.Debug.config(34,4): warning : No element in the source document matches '/configuration/connectionStrings'
2> Transformed Web.config using C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\Web.Debug.config into obj\Debug\TransformWebConfig\transformed\Web.config.
2> Auto ConnectionString Transformed obj\Debug\TransformWebConfig\transformed\Web.config into obj\Debug\CSAutoParameterize\transformed\Web.config.
2> Copying all files to temporary location below for package/publish:
2> obj\Debug\Package\PackageTmp.
2> Packaging into C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.zip.
2> Adding sitemanifest (sitemanifest).
2> Adding IIS Application (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
2> Creating application (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
2> Adding virtual path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
2> Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp).
2> Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin).
2> Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\en).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\en\Microsoft.IdentityModel.resources.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.IdentityModel.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.IdentityModel.Extensions.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.SharePoint.Client.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.SharePoint.Client.Runtime.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\MySharePointAppWeb.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\MySharePointAppWeb.pdb).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\packages.config).
2> Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Pages).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Pages\Default.aspx).
2> Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\jquery-1.7.1.js).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\jquery-1.7.1.min.js).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\_references.js).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Web.config).
2> Adding ACL's for path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
2> Adding ACL's for path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
2> Adding declared parameter 'IIS Web Application Name'.
2> Package "MySharePointApp.Web.zip" is successfully created as single file at the following location:
2> file:///C:/_works/visual%20studio%202012/Projects/MySharePointApp/MySharePointApp/obj/WebDeploy
2> To get the instructions on how to deploy the web package please visit the following link:
2> http://go.microsoft.com/fwlink/?LinkId=124618
2> Sample script for deploying this package is generated at the following location:
2> C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.deploy.cmd
2> For this sample script, you can change the deploy parameters by changing the following file:
2> C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.SetParameters.xml
2> Successfully created package at: C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\bin\Debug\app.publish\1.0.0.0\MySharePointApp.app
3>------ Deploy started: Project: MySharePointApp, Configuration: Debug Any CPU ------
3>Active Deployment Configuration: Deploy App for SharePoint
3>Uninstall app for SharePoint:
3> Skipping the uninstall step because the app for SharePoint is not installed on the server.
3>Install app for SharePoint:
3> Uploading the app for SharePoint...
3> Creating a trusted root authority in SharePoint for IIS Express.
3> Installation is in progress (00:00:00)
3> Installation is in progress (00:00:01)
3> Installation is in progress (00:00:02)
3> Installation is in progress (00:00:03)
3> Installation is in progress (00:00:05)
3> Installation is in progress (00:00:06)
3> App failed to install, cleaning up...
3> App installation cleanup failed due to errors. Please see the app on the SharePoint site’s “Site Contents” page for details.
3> App installation encountered the following errors:
3>
3> @"Error 1
3>        CorrelationId: ceeeafab-3834-40ea-b360-c29d103e2248
3>        ErrorDetail: The remote hosting service is not configured.
3>        ErrorType: Configuration
3>        ErrorTypeName: Configuration
3>        ExceptionMessage: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.
3>        Source: RemoteWebSite
3>        SourceName: Remote Web Site Deployment
3>
3> @"Error 2
3>        CorrelationId: ceeeafab-3834-40ea-b360-c29d103e2248
3>        ErrorDetail: The remote hosting service is not configured.
3>        ErrorType: Configuration
3>        ErrorTypeName: Configuration
3>        ExceptionMessage: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.
3>        Source: RemoteWebSite
3>        SourceName: Remote Web Site Deployment
3>Error occurred in deployment step 'Install app for SharePoint': Failed to install app for SharePoint. Please see the output window for details.
========== Build: 2 succeeded, 0 failed, 0 up-to-date, 0 skipped ==========
========== Deploy: 0 succeeded, 1 failed, 0 skipped ==========

Z10/BB Link support for GroupWise

Similar Messages

Maybe you are looking for