How to setup ATG cluster?
Please provide me with detailed steps on installing ATG cluster under weblogic application server?
Hi,
You can start reading this Oracle document:
http://docs.oracle.com/cd/E24152_01/Platform.10-1/ATGInstallGuide/ATGInstallGuide.pdf
It has a "Setting Up Clustering on WebLogic" session.
Hope it helps
Similar Messages
-
How to setup the cluster environment for BPM using weblogic
want to setup the cluster environment for BPM using weblogic....
i have installed the oracle weblogic server 10gr3 and oracle BPM enterprise for weblogic 10gR3
i have used the Admin tools from the "oracle BPM enterprise for weblogic" to setup the configuration and create the weblogic domain servers.
i can launch the process administrator and import the project exp file to domain server.
but what should i do to setup cluster environment using weblogic?
what i want to do is :
setup one admin machine..
setup two product machine..
enable the cluster so the admin machine can monitor the status of the product machine..
thanks a lot ...The install guide at http://download-llnw.oracle.com/docs/cd/E13154_01/bpm/docs65/config_guide/index.html gives a reasonable amount of info on how to do this.
Personally I have not used the OBPM option to configure WebLogic instead I've used the information in the above install guide to create the weblogic domain in advance of configuring OBPM.
Once you've setup WebLogic configure OBPM using the values I mention in the following thread: How to set the JMX Engine parameter in Process Administation?
Let me know any specific config questions and I'll do my best to answer them for you.
Thanks,
Mike -
How to setup a Cluster of 3 servers on weblogic 9.2?
I'm trying to setup a cluster of 3 servers on WebLogic 9.2 on one physical computer.
I managed to startup 3 servers from cmd in windows like this:
startmanagedweblogic BiPublisher1 http://127.0.0.1:7101
startmanagedweblogic BiPublisher2 http://127.0.0.1:7101
startmanagedweblogic BiPublisher3 http://127.0.0.1:7101
Now I can open each of the 3 servers directly from my browser:
http://127.0.0.1:8101/xmlpserver
http://127.0.0.1:9101/xmlpserver
http://127.0.0.1:9501/xmlpserver
My questions are:
How to setup servers so that I can start them automatically from administration console?
How to configure address in administration console through which I will open my application in a browser?
And after that, how to configure that when server on which I work breaks, it automatically restarts application in another server (no need for failover because BI Publisher does not support session replication, I think)?
Do I need machine and virtual host, and what is their purpose? Node manager? Can somebody explain those things? What i did wrong?
I made this in administration console:
Administration console:
SERVERS:
AdminServer:
Name: BIPublisherServer
Listen address: 127.0.0.1
Listen port: 7101
Server1:
Name: BIPublisher1
Machine: tp43
Cluster: BiPublisherCluster
Listen address: 127.0.0.1
Listen port: 8101
Server2:
Name: BIPublisher2
Machine: tp43
Cluster: BiPublisherCluster
Listen address: 127.0.0.1
Listen port: 9101
Server3:
Name: BIPublisher3
Machine: tp43
Cluster: BiPublisherCluster
Listen address: 127.0.0.1
Listen port: 9501
CLUSTERS:
Cluster: BiPublisherCluster
Multicast Address: 237.0.0.101
Multicast port: 8050
VIRTUAL HOSTS:
Name: bicluster
Virtual Host Names: 127.0.0.1
Targets: Clusters: BiPublishercluster: All servers in the cluster
MACHINES:
Name: tp43
DEPLOYMENTS:
Name: xmlpserver
Path: C:\BiPub\xmlpserver.war
Targets: Virtual Hosts: biclusterYou have some reading to do to increase your familiarity with cluster / managed servers.
How to setup servers so that I can start them automatically from administration console?Add the 3 servers into your cluster. Use the cluster to start and stop all 3 servers from within the console instead of starting / stopping each server individually.
How to configure address in administration console through which I will open my application in a browser?You'll need some sort of load balancer to direct traffic so that the end user doesn't have to know the server/port combinations. Apache + Weblogic plugin for instance, but I don't think you'll be keeping all 3 instances on the same physical machine as your production design.
And after that, how to configure that when server on which I work breaks, it automatically restarts application in another server (no need for failover because BI Publisher does not support session replication, I think)?Target your application to "All servers in the cluster". You should have your managed instances on separate physical machines since your current configuration is vulnerable to a single machine failure which would shutdown all 3 instances. -
How to setup weblogic cluster in 6.1 SP4
Hi All,
I have a Licensed weblogic in my solaris servers. I need to test weblogic clustering
. How can i simulate weblogic clustering is there is any easy steps to do that
and what should i do in order to make my EJB`s cluster aware. And some ppl say
that i need to take a seperate weblogic cluster license other than the weblogic
license.Kindly help me in proceeding further
Thanks in advance
Bala.J
Hi
I have same problem at beforetime.
You can do follow:
Step 1:
copy rt.jar form JDK 1.2.1\jre\lib\jar
to J2EE1.2.1\lib\system\
Step 2:
Set J2ee_classpath = c:\j2ee1.2.1\lib\system\rt.jar
Step 3:
Restart computer and J2ee
You can try it
Help can help you
David -
I want to know how to setup the logicaladdress (cluster+HA+oracle)
I want to know how to setup the logicaladdress (cluster+HA+oracle)
Please have a look at:
http://docs.sun.com/app/docs/doc/819-0703/6n343k6g0?q=SUNW.LogicalHostname&a=view
for how to add a Logical Hostname Resource to a Resource Group (in that case the RG where you configrued ha oracle for).
There is nothing special for HA oracle on that part.
If you configure your oracle_listener resource for that specific logical hostname resource, then you should configure a dependecy from the oracle_listener to the LH.
By default the RG will have property Implicit_network_dependencies set to true, which should be enough.
If this property is false, I recommend adding the LH resource name to the Resource_dependencies property of the oracle_listener resource.
For a general overview I recommend reading:
http://docs.sun.com/app/docs/doc/819-0703/
Greets
Thorsten -
How to setup Adobe Media Server Professional x 2 run as cluster for load balance?
How to setup Adobe Media Server Professional x 2 run as cluster for load balance?
Hi,
Welcome to adobe forums,
Please refer to these help files in order to setup AMS as a cluster : https://helpx.adobe.com/adobe-media-server/config-admin/load-balancing.html
https://helpx.adobe.com/adobe-media-server/tech-overview/scaling-server.html
Let me know if you need any help.
Regards,
Puspendra -
How to setup a static multicast ARP entry with Cisco SF300-08?
We're running a cluster in multicast mode as a loadbalancer.
We have Cisco SF300-08 and when we adding a static ARP entry results in an error message telling the user that the hardware address needs to be a valid unicast MAC address.
So how to setup a static multicast in Cisco SF300 or maybe someone know other solution to setup multicastes mode in Cisco SF300.Hi, Tom!
We have two watchguard xtm505(cluster active-active) in our network. Watchguard interfaces have one ip and one mac adresses. IP 192.168.111.1(Unicast) and MAC 01:00:5e:02:02:03(multicast). Cisco SF300 is router to outside networks(to internet). Cisco IP adresss is 192.168.111.254. There are another some hosts in this network.
Ping from hosts to 192.168.111.254 works well. Ping from hosts to 192.168.111.1 works well too. But there is no ping from watchguard cluster(192.168.111.1) to Cisco(192.168.111.254). And there is no routing to internet
This is well-known situation. We need to do following(example for cisco 3750):
1. Start the Cisco 3750 command line interface.
2. Add a static ARP entry for the multicast MAC address of the FireCluster interface.
Type this command:
arp arpa
For this example, type:
arp 192.168.111.1 01:00:5e:02:02:03 arpa
3. Add an entry to the MAC address table.
Type this command:
mac-address-table static vlan interface <#>
For this example, type:
mac-address-table static 01:00:5e:02:02:03 vlan 1 interface gi1/0/11
But we can't add arp entry on Cisco SF300. CLI tells us "MAC address illegal"!
We tried enable igmp snooping, but is not helps.
Could you tell more detailed about MAC groups? -
How to manage windows cluster on windows server 2008 R2
Hi I want to know how to properly shutdown or stop windows cluster with out failover or failing it.
I have successfully created windows cluster on win 2008 R2 sp1 using vmware with starwind software for SAN storage.
Now when I shut down or stop cluster service on node1 it failsover and shows critical errors fine.ok... I tried to destroy and clean up cluster using cmd commands.Forcecleanup both nodes with cmd commands.it was successful.
Later I recreated san storage with target and initiator configuration using starwind without any issue.
I Reinstalled FC service on both the nodes restarted vmnodes.I cheked all the firewall were disable.and machines able to ping well..
Now when I tried to recreate new cluster it fails and gives different errors.AS Node1 was evicted from cluster,Another was Quoram was lost as no witness disk was found.
Also It did not show my cluster under FCM on Node2.I tried to add node Node2 but error saying Node2 is already in a cluster.
So I want to know how to manage windows cluster properly and manage it entries in active directory so that even after shutting/stopping the service/destroying cluster I do not need to do all over again.
I had to recreate all VMware from start and do AD setup and SAN storage again then only windows cluster got successfully created once again....................
I had to recreate all vmware nodes with FC sevice reinstalled and also recreate AD DS and DNS.
srm_2010Hi srm_2010,
You can refer the following KB:
Start or Stop the Cluster Service on a Cluster Node
http://technet.microsoft.com/en-us/library/cc771742.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
How to setup private network in oracle rac
Hi all,
Iam trying to setup oracle 2-NODE RAC ,
now i stuck in setup private network..
how to setup private network, what i have to do for that.
please help us provide step by step processThe loop is nothing but a network cable connecting two nodes on same port with a private IP address (something like 10.0.01 and 10.0.0.2) which is not accessible by any other machine in the network (except 2 nodes obviously ).
Note that cross over cables are not supported for the Cluster Interconnect. And cross over cables limit the cluster to only 2 nodes, which may not be enough for many RAC deployments.
Cheers,
Brian -
How to setup Clustering with Weblogic?
Dear All,
I am a beginner of using Weblogic. Now i need to setup Clustering in
company. I have 3 NT Server and install Weblogic 5.1.0 on each machine, the
name is Cluster1, Cluster2 and Cluster3. At the First Step, can someone tell
me how to setup the clustering and how to test it to esure that is work???
Thanks so much!
hk-beginnermore specifically,
http://www.weblogic.com/docs51/cluster/index.html
Ketan
"Billy Bunter" <[email protected]> wrote in message
news:[email protected]..
Look at the BEA docs.
beginner wrote:
Dear All,
I am a beginner of using Weblogic. Now i need to setup Clustering
in
company. I have 3 NT Server and install Weblogic 5.1.0 on each machine,the
name is Cluster1, Cluster2 and Cluster3. At the First Step, can someonetell
me how to setup the clustering and how to test it to esure that iswork???
Thanks so much!
hk-beginner -
How to setup AccessGate - OAM 10.1.4
Hi All,
How to setup AccessGate to use cluster?
I read "3.4.4 Modifying an AccessGate" in Access Manager Admin Guide, but no hint in it.
the tool configureAccessGate only let me fill just one server host name. But the host could be the single point error.
-h Access Server Host Name
-p Access Server Port
Anybody has suggestions?
Thanks & Regards,
JustinHi Vinod,
Below is the content of ObAccessClient.xml. I can see two access servers are set. But the second is never used.
<?xml version="1.0" encoding="utf-8"?>
<CompoundList
xmlns="http://www.oblix.com"
ListName="ObAccessClient.tmp">
<SimpleList>
<NameValPair
ParamName="id"
Value="hat"></NameValPair>
</SimpleList>
<SimpleList>
<NameValPair
ParamName="accessClientPasswd"
Value="004354474A"></NameValPair>
</SimpleList>
<SimpleList>
<NameValPair
ParamName="primaryCookieDomain"
Value=""></NameValPair>
</SimpleList>
<SimpleList>
<NameValPair
ParamName="preferredHost"
Value="16.157.68.238"></NameValPair>
</SimpleList>
<SimpleList>
<NameValPair
ParamName="state"
Value="Enabled"></NameValPair>
</SimpleList>
<SimpleList>
<NameValPair
ParamName="maxCacheElems"
Value="100000"></NameValPair>
</SimpleList>
<SimpleList>
<NameValPair
ParamName="cacheTimeout"
Value="1800"></NameValPair>
</SimpleList>
<SimpleList>
<NameValPair
ParamName="cookieSessionTime"
Value="3600"></NameValPair>
</SimpleList>
<SimpleList>
<NameValPair
ParamName="maxConnections"
Value="10"></NameValPair>
</SimpleList>
<SimpleList>
<NameValPair
ParamName="maxSessionTime"
Value="24"></NameValPair>
</SimpleList>
<SimpleList>
<NameValPair
ParamName="idleSessionTimeout"
Value="3600"></NameValPair>
</SimpleList>
<SimpleList>
<NameValPair
ParamName="failoverThreshold"
Value="2"></NameValPair>
</SimpleList>
<SimpleList>
<NameValPair
ParamName="aaaTimeoutThreshold"
Value="-1"></NameValPair>
</SimpleList>
<SimpleList>
<NameValPair
ParamName="sleepFor"
Value="60"></NameValPair>
</SimpleList>
<SimpleList>
<NameValPair
ParamName="debug"
Value="false"></NameValPair>
</SimpleList>
<SimpleList>
<NameValPair
ParamName="security"
Value="open"></NameValPair>
</SimpleList>
<SimpleList>
<NameValPair
ParamName="state"
Value="Enabled"></NameValPair>
</SimpleList>
<SimpleList>
<NameValPair
ParamName="denyOnNotProtected"
Value="0"></NameValPair>
</SimpleList>
<SimpleList>
<NameValPair
ParamName="cachePragmaHeader"
Value="no-cache"></NameValPair>
</SimpleList>
<SimpleList>
<NameValPair
ParamName="cacheControlHeader"
Value="no-cache"></NameValPair>
</SimpleList>
<SimpleList>
<NameValPair
ParamName="ipValidation"
Value="1"></NameValPair>
</SimpleList>
<ValList
xmlns="http://www.oblix.com"
ListName="primary_server_list">
<ValListMember
Value="primaryServer1"></ValListMember>
<ValListMember
Value="primaryServer2"></ValListMember>
</ValList>
<ValNameList
xmlns="http://www.oblix.com"
ListName="primaryServer1">
<NameValPair
ParamName="host"
Value="sip3.chn.com"></NameValPair>
<NameValPair
ParamName="port"
Value="6080"></NameValPair>
<NameValPair
ParamName="numOfConnections"
Value="5"></NameValPair>
</ValNameList>
<ValNameList
xmlns="http://www.oblix.com"
ListName="primaryServer2">
<NameValPair
ParamName="host"
Value="sip4.chn.com"></NameValPair>
<NameValPair
ParamName="port"
Value="6080"></NameValPair>
<NameValPair
ParamName="numOfConnections"
Value="5"></NameValPair>
</ValNameList>
<ValList
xmlns="http://www.oblix.com"
ListName="secondary_server_list"></ValList>
</CompoundList> -
How to setup three SharePoint sites on one server?
Hello,
How to setup three SharePoint sites on one server? I have three sites like:
http://site1
http://site2
http://site3
And need to have them running up on one server. I recall some changes need to be done to the host file, but not sure. Can you advise on what to change?
Thanks,
Paul
Paulyou need to make entries in DNS to get this done.
check here:http://spshare.blogspot.com/2012/05/how-to-create-host-header-web.html
nice blog with step by step explanation:
http://thuansoldier.net/?p=1323
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
How to setup multiple base station under one network?
How to setup multiple base station under one network? I have 6 rooms but one airport base station makes really difficult to get good signal from every rooms. I wonder if I can setup multiple airport base stations talking to each other under the same network to build up the signal strength will help solve this problem. But, is it possible? How?
One route would be to utilize a "roaming" network. In a roaming network, you would connect multiple AirPort Extreme Base Stations (AEBS) to the same Ethernet. Of course, this would require that your home is already wired for Ethernet.
-
How to Setup SSL on Oracle Application Server 10g Release 2 (10.1..2)
Hi All,
Can anybody tell me How to setup the SSL on Oracle Application Server 10g Release 2 (10.1.2).
I have all the required documents like
1. Oracle Application Server Portal Server Configuration Guide.
2. Oracle Application Server Web Cache Configuration Guide.
3. Oracle Application Server SSO Administration Guide.
I tried to follow all this documents but still i am not able to set SSL for Oracle Portal Server.The Portal Configuration Guide, available on OTN at http://www.oracle.com/technology/documentation/appserver1012.html does provide some very specific information on how to set up OracleAS Portal.
Section 6.3.2.1 Configuring SSL for OracleAS Portal describes various configurations, such as:
SSL to OracleAS Single Sign-On
SSL to OracleAS Web Cache
SSL Throughout OracleAS Portal
External SSL with Non-SSL Within Oracle Application Server
For larger enterprise configurations, you can refer to the Enterprise Deployment Guide.
Can you give a bit more background on what you are trying to set up? Which scenario, what sort of hardware, software versions, and so on.
Regards,
Pete -
How to setup a static IP for a wireless printer
This problem has been ongoing for several versions of OS X and the last five printers I've had and I'm finally over messing with it. For some reson, when using a wireless printer with OS X this is a repetetive problem, and I think if I configured the printer to a static IP address instead of using DHCP, it might work better. At least once a week, if not more often, I'll print something and get the ubiquitous Dock error of "Printer is not connected". The printer is still in Preferences, but if I delete it, then it doesn't show up as it should for selection.
The only way to fix this is reboot, and then the printer shows up again in Preferences. I select it and all is well again...until a few days pass and the same thing happens again. Using an HP LaserJet P1102w, still a current model, but it doesn't matter which printer I use. I also have an Epson Artisan 725 and the same thing happens with it about once a week. Also, this happens from both my Mac and my wife's Mac, so it's not an issue with just my machine.
I've searched for documentation on how to setup a static IP address for a wireless printer with the Airport Extreme, but all I find are tutorials on how to do it with an ethernet hard-wired printer. Any help would be greatly appreciated.You could set up your router to do manual assignment of IP address instead of using DHCP, but that is a PITA, because then you'd have to manually set up IP for all your devices.
If you have AirPOrt Extreme, you could do this:
In your Apple TV, go to the Settings >> About and write down the MAC address of your ATV
Start up the AiPort Admin Utility
Go to Network tab
click + in the DHCP reservations
Choose an IP you want for your ATV & Enter the MAC address
From now on, this IP address will be reserved to the MAC address and only your ATV will be able to get it, no other device will.
It is not a static IP in a true sense, but behaves just like one.
Works great for me...
If you don't have a AP Extreme, I'm sure other routers will allow you do reservations too.
Maybe you are looking for
-
Safari and Mail crashing/ not opening
Safari and Mail keep crashing on my MacBook Pro (2010). A bit at a loss - Activity Monitor seems normal, tonnes of space. This is the error message I get: Thank you for all your help! Process: Mail [1612] Path: /Applications/Mail.app/Conte
-
How to Set Taskbar Icon in Windows 10?
I have installed windows 10 preview version and try to develop apps on it. I use SendMessage(hwnd, WM_SETICON, ICON_SMALL, myicon); to change the application icon before win 8.1. But I found that the icon in taskbar is no longer the same as that of w
-
We have recently started using ID CC 2014 and recently have been having Crashing issues stating the network connection was lost. Anyone else having this issue?
-
Unable to download Mac App Store
I downloaded it once, but then my Mac started hanging so I trashed it. Now when I click software update, it says my software is up to date. Is there another way to download Mac App Store...is it even worth it to try? It seems a lot of people are havi
-
Logging.properties which associates loggers with file handlers
Hello, I am trying to find documentation on how to setup the logging.properties config file for java.util.logging which associates loggers with file handlers. Suppose I have 3 loggers, and I want them each associated with their own file handler (diff