How to setup cash forecasting in Oracle Applications Release 12

Hi,
Is there any document/note/presentation which explains how to setup cash forecasting in Oracle Applications Release 12.
Balu

Thanks alot Mahesh Jayashan. I checked on following tables the DATA for year 2011 didnot exists it only contains for Previous Years and Months.
1- W_MCAL_PERIOD_D
2- W_MCAL_QTR_D
3- W_MCAL_YEAR_D
4- W_MCAL_CONTEXT_G
FOR TEST basses I Manually inserted Data for 2011 to W_MCAL_YEAR_D Table so data was shown on Dashboard for Year but i wasn't able to See for 2011 Months cause i didn't Manually inserted data in other tables.
Thanks man
chreeez
Edited by: 862383 on May 30, 2011 10:19 AM

Similar Messages

How to setup local loopback for "Oracle 11g Release 2" installtion

Hi all,
I was trying to install the Oracle 11g Release 2 on Red hat 6 using Local Loop back configuration, but not able to install..
The contents of are:-
/etc/resolv.conf
# Generated by NetworkManager
nameserver 59.179.243.70
nameserver 203.94.243.70
and of /etc/hosts are:
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
and
System eth0 is having setting given below:-
IPV4 is set to " Automatic(DHCP)".
IPV6 is set to "ignore".
If i select system etho0 then host-name gets changed it becomes "dhcppc0".
i checked it using command host-name. and if i try to install with this configuration then during installation gives error of networking as host-name has been changed to "dhcppc0".
Please tell me what to do for local loopback configuration
Am i doing some thing wrong?
Thanks

i am using "oracle Release 11.2.0.1.0" but same problem was there with oracle 10g on redhat 5.
Please tell me how to setup local loopback configuration so that i can use internet as well as oracle on same machine. otherwise for internet use i have to change my system ipV4 to automatic(DHCP). if i change it to automatic(DHCP) then oracle stop its working please tell me solution for both case.
I can not assign Static IP to IPv4, i earlier post i got recommendation to connfigure Local Loopback , but i am able to setup it.
what ever the setting i have done are given below:--
vi /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
vi .etc/resolv.conf
# Generated by NetworkManager
nameserver 59.179.243.70
nameserver 203.94.243.70
#ping localhost
PING localhost.localdomain (127.0.0.1) 56(84) bytes of data.
64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=1 ttl=64 time=0.048 ms
64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=2 ttl=64 time=0.073 ms
64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=3 ttl=64 time=0.037 ms
++++++++++++++++++++++++++++++++++++++++++++++++
error is------
[INS-06101]Ip address of localhost could not be determined
are you sure you want to continue?
Cause - The localhost is not mapped to a valid IP address in Hosts file (Eg. /etc/hosts in Unix).
Action - Assign a valid IP address for the localhost or set it to loopback IP address (127.0.0.1 in IPv4 or ::1 in IPv6).
Summary - dhcppc0: dhcppc0
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
log file lines are:--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Using paramFile: /database/install/oraparam.ini
Checking Temp space: must be greater than 80 MB. Actual 7471 MB Passed
Checking swap space: must be greater than 150 MB. Actual 3499 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
The commandline for unzip:
/database/install/unzip -qqqo ../stage/Components/oracle.jdk/1.5.0.17.0/1/DataFiles/\*.jar -d /tmp/OraInstall2012-05-29_05-13-01PM
Using the umask value '022' available from oraparam.ini
Execvp of the child jre : the cmdline is /tmp/OraInstall2012-05-29_05-13-01PM/jdk/jre/bin/java, and the argv is
/tmp/OraInstall2012-05-29_05-13-01PM/jdk/jre/bin/java
-Doracle.installer.library_loc=/tmp/OraInstall2012-05-29_05-13-01PM/oui/lib/linux
-Doracle.installer.oui_loc=/tmp/OraInstall2012-05-29_05-13-01PM/oui
-Doracle.installer.bootstrap=TRUE
-Doracle.installer.startup_location=/database/install
-Doracle.installer.jre_loc=/tmp/OraInstall2012-05-29_05-13-01PM/jdk/jre
-Doracle.installer.nlsEnabled="TRUE"
-Doracle.installer.prereqConfigLoc=
-Doracle.installer.unixVersion=2.6.32-220.el6.i686
-mx150m
-cp
/tmp/OraInstall2012-05-29_05-13-01PM::/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/OraPrereqChecks.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/jsch.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/instcommon.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/instdb.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/OraPrereq.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/ssh.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/prov_fixup.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/emocmutl.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/orai18n-utility.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/orai18n-mapping.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/installcommons_1.0.0b.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/cvu.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/remoteinterfaces.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/OraInstaller.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/oneclick.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/xmlparserv2.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/share.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/OraInstallerNet.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/emCfg.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/emocmutl.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/OraPrereq.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/jsch.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/ssh.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/remoteinterfaces.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/http_client.jar:../stage/Components/oracle.swd.opatch/11.2.0.1.0/1/DataFiles/jlib/opatch.jar:../stage/Components/oracle.swd.opatch/11.2.0.1.0/1/DataFiles/jlib/opatchactions.jar:../stage/Components/oracle.swd.opatch/11.2.0.1.0/1/DataFiles/jlib/opatchprereq.jar:../stage/Components/oracle.swd.opatch/11.2.0.1.0/1/DataFiles/jlib/opatchutil.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/OraCheckPoint.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstImages.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_de.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_es.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_fr.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_it.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_ja.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_ko.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_pt_BR.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_zh_CN.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_zh_TW.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/oracle_ice.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/help4.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/help4-nls.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/ewt3.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/ewt3-swingaccess.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/ewt3-nls.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/swingaccess.jar::/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/jewt4.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/jewt4-nls.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/orai18n-collation.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/orai18n-mapping.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/ojmisc.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/xml.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/srvm.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/srvmasm.jar
oracle.install.ivw.db.driver.DBInstaller
-scratchPath
/tmp/OraInstall2012-05-29_05-13-01PM
-sourceLoc
/database/install/../stage/products.xml
-sourceType
network
-timestamp
2012-05-29_05-13-01PM
INFO: Loading data from: jar:file:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Loading beanstore from jar:file:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Verifying target environment...
INFO: Checking whether the IP address of the localhost could be determined...
SEVERE: Unable to determine a valid IP for the localhost..
Refer associated stacktrace #oracle.install.driver.oui.OUISetupDriver:13
INFO: Completed verification of target environment.
WARNING: Verification of target environment returned with errors.
WARNING: [WARNING] [INS-06101] IP address of localhost could not be determined
CAUSE: The localhost is not mapped to a valid IP address in Hosts file (Eg. /etc/hosts in Unix).
ACTION: Assign a valid IP address for the localhost or set it to loopback IP address (127.0.0.1 in IPv4 or ::1 in IPv6).
SUMMARY:
- dhcppc0: dhcppc0.
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:16
INFO: Advice is WITHDRAW
WARNING: Advised to shutdown the installer due to target environment verification errors.
INFO: Adding ExitStatus PREREQ_FAILURE to the exit status set
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -3
INFO: Shutdown Oracle Database 11g Release 2 Installer
---------------------------------------------------------------------------------------------

How can i attach files in oracle applications

Hi,
How can i attach files in oracle applications ? Is there any thing like open dialogue box?
krishna

Hi Naveen,
While I am searching for attaching files to oracle forms in forum, I found you. I have a question; probably you could help me out. I have a custom form which needs to have the facility to open the text files from C drive and load the data into Oracle tables.
The custom form will be attached to Oracle apps responsibility... We are currently using forms6i.
Could you help me out to open a dialog box which provides the users to open the text files from C drive when user clicks on a button
I have attached d2kcomm and d2kwutil to the form. It complies at the form level
but still it is not showing the dialog box.
I would appreciate if you can help me in this regard.
Thanks in Advance
Ravi.
Message was edited by:
ravipampana

Oracle Application Release 11 having error

Hi all,
I'm having problem with our Oracle Application Release 11. When I create a new Responsibility in General Ledger, I follow the exact step to create responsibility. But when I use the responsibility to open a Form in AP>Setup>Payment>Format , it gives us this error message->>> FRM-40735 PRE-FORM trigger raised exception NO_DATA_FOUND
This is the first time we create responsibility after doing upgrade and patching. Could it probably have mess things up?
Thanks for any reply!!! Really appreciate it if anyone out there can guide us on this.

OK... i ve found the answer on this
http://www.orafaq.com/forum/t/61820/0/?

Oracle Applications Release 12 and Oracle Warehouse Builder 10gR2

Hi
I'm trying to deploying process flows to Workflow but I get the following error:
RPE-02054: The version of Oracle Workflow is incompatible with this Control Center. Required 2.6.3, but found 2.6.0.
Comment I found on another thread: "As far Workflow Versions with Oracle Applications is concerned, it is always 2.6.0. Workflow is not identified with its 2.6.x versioning in Oracle Applications. The 2.6.x.x versioning is purely for Workflow Standalone."
Oracle Warehouse Builder Client: 10.2.1.31
Oracle Warehouse Builder Repository: 10.2.0.1.0
Oracle Applications Release 12
Any help would be appreciated.

May be the excerpt from the other thread is a response I posted.
So, when you say, deploying process flows to Workflow, I do not understand what you are doing exactly? If this involves the Oracle Warehouse Builder you may want to explain a little more in detail since I do not understand how OWB works with Workflow. But as far as I have heard, it is Workflow standalone that is packaged with OWB but you are deploying into Oracle Applications.
What is the version of Oracle Workflow Builder you are using?
Is the steps you are doing certified to be done with Oracle Applications R12?
Thanks

Cloning Oracle Applications Release 12 with Rapid Clone

Hi,
I was going through metalink doc 406982.1 Cloning Oracle Applications Release 12 with Rapid Clone.
I couldn't understand a few points.
I would appreciate if someone can guide me regarding the following queries.
There is a statement in the doc
1)An important principle in Oracle Applications cloning is that the system is cloned, rather than the topology ....
--What is meant by topology in this description?
2)The Cloning methodology posted on this document requires full Autoconfig complience.
--didn't get this point.
3)Note: In the copying tasks below, UNIX/Linux users should ensure that the symbolic links (soft links) are preserved when copying. On most UNIX platforms, this can be accomplished with the cp -RH command. Consult the UNIX man page for the cp command to check the parameters available on your platform.
--what soft links are being talked about?will the regular cp -R command not preserve the soft links?
4)For patching AutoConfig on the E-Business Suite R12 instance, AutoConfig needs to be enabled on both the applications tier and the database tier. (387859.1)
--HOw do I check if AutoConfig is enabled or not?
5)Why do I need to synchronize appsutil on database tier from application tier?
6)Why do we need to maintaain snapshot information?
What does snapshot actually do?
Thannks,
Rushi

This is what I get when doing "grep rror" from 9239089 logfile.
will be ignored without error.
will be ignored without error.
will be ignored without error.
0 files had fatal errors.
0 files had fatal errors.
Performing second half of mirrored copies...
No mirrored copies were executed in this patch.
oracle/apps/ad/splice/adError [120.0.12010000.1] {oracle/apps/ad/splice/adError.class }
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.2/forms/java/frmall.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.2/jlib/ewt3.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.2/jlib/ewt3-nls.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.3/lib/xmlparserv2.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.3/j2ee/oafm/applications/mapviewer/web/WEB-INF/lib/mvclient.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.3/j2ee/home/lib/mail.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.3/j2ee/home/lib/activation.jar: No metadata entry META-INF/JRIMETA.DAT found
oracle/apps/media/ieu_status_error
oracle/xml/parser/v2/XMLErrorMsg
oracle/xml/parser/v2/mesg/XMLErrorMesg
oracle/xml/parser/v2/mesg/XMLErrorMesg_ar_AE
oracle/xml/parser/v2/mesg/XMLErrorMesg_ca_ES
oracle/xml/parser/v2/mesg/XMLErrorMesg_cs_CZ
oracle/xml/parser/v2/mesg/XMLErrorMesg_da_DK
oracle/xml/parser/v2/mesg/XMLErrorMesg_de_DE
oracle/xml/parser/v2/mesg/XMLErrorMesg_el_GR
oracle/xml/parser/v2/mesg/XMLErrorMesg_en_US
oracle/xml/parser/v2/mesg/XMLErrorMesg_es_AR
oracle/xml/parser/v2/mesg/XMLErrorMesg_es_ES
oracle/xml/parser/v2/mesg/XMLErrorMesg_fi_FI
oracle/xml/parser/v2/mesg/XMLErrorMesg_fr_FR
oracle/xml/parser/v2/mesg/XMLErrorMesg_hu_HU
oracle/xml/parser/v2/mesg/XMLErrorMesg_it_IT
oracle/xml/parser/v2/mesg/XMLErrorMesg_iw_IL
oracle/xml/parser/v2/mesg/XMLErrorMesg_ja_JP
oracle/xml/parser/v2/mesg/XMLErrorMesg_ko_KR
oracle/xml/parser/v2/mesg/XMLErrorMesg_nl_NL
oracle/xml/parser/v2/mesg/XMLErrorMesg_no_NO
oracle/xml/parser/v2/mesg/XMLErrorMesg_pl_PL
oracle/xml/parser/v2/mesg/XMLErrorMesg_pt_BR
oracle/xml/parser/v2/mesg/XMLErrorMesg_pt_PT
oracle/xml/parser/v2/mesg/XMLErrorMesg_ro_RO
oracle/xml/parser/v2/mesg/XMLErrorMesg_ru_RU
oracle/xml/parser/v2/mesg/XMLErrorMesg_sk_SK
oracle/xml/parser/v2/mesg/XMLErrorMesg_sv_SE
oracle/xml/parser/v2/mesg/XMLErrorMesg_tr_TR
oracle/xml/parser/v2/mesg/XMLErrorMesg_zh_CN
oracle/xml/parser/v2/mesg/XMLErrorMesg_zh_TW
Errors and warnings are listed in the log file
Also I am getting same kind of errors for patches 8919489,9171651,9833058 and 12404574.
Although there were neither failures nor any ORA- error in any of the log files.
Please guide what needs to be done regarding the shown errors for the patches.
after executing adpreclone on db tier I got the following message in logfile.
error while preclone on db tier:Attempt to remove existing adcrdb.zip failed
What could have been wrong?
Is the message normal and can it be safely ignored?
As a pre-install task of patch 9239089,I executed adgrantsall.sql
which gave me a prompt Enter a value for 1:
I entered apps (apps schemaname/username)
Is it ok?
Thanks,
Rushi

Cloning Oracle Applications Release 11i

Hi,
for Cloning Oracle Applications Release 11i , is it ncessary to copy jre, oui and oraInventory directories from source database tier file system to trget ?
Many thanks before.

Applications / EBS is discussed in this category http://forums.oracle.com/forums/category.jspa?categoryID=11 (and there are more, if you look at the forums home page)
But, in general the oraInventory must exist to be able to patch or otherwise maintain the installation. Wouldn't think copying directories is a supported cloning method... Again, check with the proper forum. And use the Search function!

Cash Flow IN ORACLE APPLICATION

dear Brother's
What is the meaning of "CASH Flow"?
How can handle it in oracle?
Is a cash flow like any other report like balance sheet?

Hi
Cash Flow statement in Oracle refers to the summary of projected Cash position after certain period.It is like Cash Forecasting. This is handled through Oracle Cash Management Module
Suppose you would like to know the cash position after 30 days from now
A sample could be as follows
Opening Cash Balance as of Now
Add
Sales Orders
Sales Invoices
Receivables
Project Orders
Less
Purchase requisition
Purchase orders
Suppliers Invoices
Closing Cash Balance after 30 Days
You can choose the components to add and remove the functions according to your Business Requirement
It is not the Cash and Funds Flow statement as required by Auditors. You can prepare the same with a Customized Report.
Hope this helps
Regards
Sivakumar

How to generate trace file in oracle application forms

hi
I want to generate trace fle in oracle application
Regards
9841672839

Hi,
Refer to the following documents.
Note: 296559.1 - FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=296559.1
Note: 130182.1 - HOW TO TRACE FROM FORM, REPORT, PROGRAM AND OTHERS IN ORACLE APPLICATIONS
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=130182.1
Regards,
Hussein

How to Restrict the users in oracle applications

Hi,
I want to Restrict the users in oracle applications without using database
can any one please expalin me how to resttrict the users using middletier
Thanks
Gita

HI srini ,
my application version 12.0.4 and database is 10.2.0.4
and i want to restrict the No of users
exp i have have 500 users and i want restrict to 100 only
how can i do that please explain
Thanks,
Sudheer

How to setup JNDI Name for Oracle Apps adapter?

Hello,
I am learning Oracle SOA 11g and trying to do some tutorial on Oracle Application Adapter. I know how to configure JNDI for DBadapter and I did that successfully. I followed same steps to create New JNDI for Oracle Apps Adapter.
1. I Created new data source using Path Services->Data Sources -> New Genric Data Source. Connection to database was successful and created new JNDI Name: jdbc/PKDTAPPS.
2. Then Deployment-> OracleApps Adapter-> Configuration-> Outbound Connection Pools -> New and created JNDI Name eis/Apps/PKDTAPPS.
However I did not find newly created JNDI Name in step 2 under Deployment-> OracleApps Adapter-> Configuration-> Outbound Connection Pools -> javax.resource.cci.ConnectionFactory.
Please let me know if am I following correct steps to create new Oracle Apps Adapter JNDI Name or not.
Since above approch did not work I created new JNDI for DBAdapter with same database connection details. And then latter on use that JNDI Name while creating Oracle Application Adapter in JDeveloper composite. And it allowed me to access Oracel Apps open interface. However while deploying the application it gave me following error.
<Feb 16, 2015 10:50:59 AM CST> <Error> <oracle.integration.platform.blocks.deploy.servlet> <SOA-21537> <Sending back error message: There was an error deploying the composite on AdminServer: [JCABinding]
[adapter-Apps-101-JournalImport.InsertJournal/1.0]Unable to complete unload due to: Cannot locate Java class oracle.tip.adapter.apps.AppsTableWriteInteractionSpec: Cannot locate Java class
oracle.tip.adapter.apps.AppsTableWriteInteractionSpec..>
Since I have no past experience kindly suggest me what is right way to do this.
Thanks,
Shri

Hi shri,
Can you check the targets of oracle apps adapter that is it deployed on both cluster and admin server both.
Deployment-> OracleApps Adapter-> Targets
Regards,
Anshul

How to deploy java bean in Oracle Applications?

There is a Oracle Applications Forms FNDMNMNU.fmb which calls a Java Bean to show TreeView.
The Bean Area uses the implementation class of AppletAdapter.class. Do you know that we have to use the same AppletAdapter class so that we can connect to Oracle database?
In the form of FNDMNMNU.fmb, the java bean is called like this.
fndaplt.applet_init('FND_MENUS.TREE_VIEWER',
'FS',
'oracle.apps.fnd.functionSecurity.client.FunctionTreeViewer',
l_list_id);
Do you know what 'FS' means ?
Thank you very much in advance!
It is my first time to use Java Bean in Oracle Applications!

HI srini ,
my application version 12.0.4 and database is 10.2.0.4
and i want to restrict the No of users
exp i have have 500 users and i want restrict to 100 only
how can i do that please explain
Thanks,
Sudheer

How to setup management server in oracle 10g database

guys,
i've installed oracle 10g database into my machine. but i don know how to setup the management server (for scheduling owb10g process flows). unlike 9idb, we have an option emca to setup the management server. if anyone of u knows abt it, please help me. do i need to install the grid control just to have the scheduling mechanism? please advice.

Well, it depends heavily on what operating system you're using, what mail server you're trying to install, your network topology, etc. Realistically, this is a question that is probably better asked in a forum for whatever mail server you're trying to install...
Justin

How to disable weak ciphers in Oracle Application Server?

Hello,
we're using Oracle Application Servers 10.1.2.0.2 (production environment) and 10.1.3.1.0 (test environment).
For both servers I get security complaints from our IT-Security department regarding
"SSL Medium Strength Cipher Suites Supported"
I have modified 'ssl.conf' for the apache managed ports, e.g. 443, what worked as expected. But there are still complaints on port 12701 (RMIS), which seems to be managed by the OAS directly.
Can someone please tell me how to configure that?
with best regards
Matthias

Hello Matthis,
I am having the exact same issue. Were you able to find the answer?

How to Disable Menu item in Oracle Applications

Hi,
How can I disable a Menu (Actions->user defined menu) Item in Oracle applications by using forms personalization.
Our requirement is to display a message on click of a standard menu using form personalization and it should retain the seeded functionality.
Thanks
Prasanna
Edited by: user13029651 on Jul 30, 2010 6:47 PM

As an Oracle Applications Developer, your best friends are going to be the following docuements:
<ul><li>Oracle Applications Developer's Guide </li>
<li>Oracle Applications User Interface Standards for Forms-Based Products</li>
<li>Oracle Application Framework Personalization Guide</li></UL>
These and all of the other related EBS documents can be found in the Oracle Applications (EBS) Documentation Home and don't forget the Oracle eTRM Technical Reference, but you will need an Oracle Support contract to access this site.
When you can't find your answer in these document sources, you can always ask for help in the E-Business Suite group of forums.
Craig...

How to setup cash forecasting in Oracle Applications Release 12

Similar Messages

Maybe you are looking for