How to setup do not move the source files ?

Media encoder change the source file position.some software can not find the change. do not  do angthing to my source files@

You can simply download the PDF files from the workspace to your desktop.

Similar Messages

  • Logon Error:Could not retrieve the source file for Port "Main"

    Hi All,
    We have a port which is blocked due to structural exceptions.When i try to connect to the Exceptions folder
    "Main[Exceptions]" the import manager throws an error "Logon Error:Could not retrieve the source file for port "Main".
    Any help greatly appreciated

    Hi ,
    Thanks for your reply.
    This is what I see in the log file in the exceptions folder
    These are the line I see almost to the end of the log file before they complete field mappings,value addings
              <Failure ts="2008/07/22 00:10:48.326 GMT" tid="1286" entry-no="9114" operation="Create lookups" rc="0x80000001">Illegal value for parameter</Failure>
              <Timer ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9115" name="Import Lookup" total="0.040819">1</Timer>
              <Trace ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9116">Import of Lookup Failed.</Trace>
    But when I open the same source xml file after downloading to my local folder from Exceptions Structural folder and load manually using IM i get the status as "Ready to import".
    Any Help greatly appreciated

  • Sender File adapter not deleting the source file after reading

    Hi everyone,
    In the sender Communication channel i have choosen the "Delete" option after reading the source file. But it is reading the file, but it is not deleting the file. I have checked the file status. it is with full persmission.
    can anyone give solution to this.
    Thanx
    Bala

    Hi,
    1. set the mode to delete
    2. make sure the file is "deletable"
    3. check xiserver:port/MessagingSystem/monitor log to see what happens with the file
    (chec both audit and log in that link)
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • My laptop crashed. I have the disk (intact). How do I find and move the inbox files (not local folders) of my three pop3 accounts to the new laptop?

    Old laptop had Thunderbird. THe laptop stopped working, so I took the C drive (SATA disk) and and plugged that to a USB port.
    New laptop has Thunderbird installed, local folders have been restored. The inbox contents are missing (I use the option "download from server", so the recent correspondence is there.
    I have three POP3 accounts, so I am trying to identify the location of three separate "inbox" and "Sent" folders, and add them to the new installation.
    Where are those files stored, and what would be the simple way to restore them on the new laptop?

    So this seemed to result in the outcome I wanted:
    - Find the old Thunderbird profile location (.../AppData/Roaming ... THunderbird/Profiles/...default/Mail/first.account.domain/Inbox
    - FInd the same location on the New laptop
    Copy the first (old, backup) inbox to a new file in the New profile folder; I did Inbox.bak
    Start TBird - and lo and behold, I have folders "Inbox" (recent mail since the old laptop crash) and "Inbox.bak" (the mail I thought was lost).
    Looks like I need to add all accounts to the New TBird first so that it creates the profiles, and after that copy the backup Inbox & Sent files to the new profile folders.
    This worked for me. Not very elegant, with several manual steps, but end result is what I needed.
    It would be great if there was a smoother way for disaster recovery.
    And yes, I should have had better backup policy in place. For everyone's benefit - I do Data Center systems for a living, and have seen far too many "backup" services which do not actually work in a restore situation. That's why my personal backups are direct file copies on large disks. It works, but leaves room for manual error, which is what happened here.
    Actual folders, btw, I keep where I see them - "c:\users\username\Thunderbird" - for this very reason.

  • How to Append date time to the Source File Name in send Port without Orchestration

    Hi,
    I am using the Macro %SourceFileName%_%datetime%.zip in the filename(Send Port).
    say my file name is ABC.zip
    But I am getting the output as ABC.zip_2013T083444
    Please suggest, How to avoid the extension?
    Vignesh S ----------------------------------------------------------- Please use Mark as Answer if my post has solved your problem and use Vote As Helpful if my post was useful.

    The problem here is %SourceFileName% context property would return filename “With” extension. So when you use %SourceFileName%_%datetime%.zip you get FileNameWithExtension_Datetime
    For this you have to handle it either in customer pipeline component or in orceshtration where you have to remove the extension from the Filename.
    Read this post on remove the extension from this file name
    msgOut(FILE.ReceivedFileName) = System.IO.Path.GetFileNameWithoutExtension(msgIn(FILE.ReceivedFileName));
    After this if you use the
    %SourceFileName%_%datetime%.zip macro, you would get the desired output.
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

  • Laptop crashed. new laptop has windows 8. how do I find and move the old files to the new laptop?

    My Windows 7 laptop crashed. New laptop is Windows 8.1. I have the hard drive from the old laptop. Where can I find my old emails and address books and where do I copy them in Windows 8 ?

    Thunderbird stores all personal information such as messages, address books and configuration settings in a folder called the profile
    Take Profile Backup and Restore to New Computer
    *https://support.mozilla.org/en-US/kb/moving-thunderbird-data-to-a-new-computer
    *http://www-archive.mozilla.org/support/thunderbird/profile
    *http://kb.mozillazine.org/Profile_folder_-_Thunderbird
    *https://support.mozilla.org/en-US/kb/profiles-tb

  • Mass move of source files in Photoshop Elements (PSE) 7...or 6 or 5 or 4...

    Because my Photoshop Elements 7 (previously 5 and 3 and 1) catalog outlasted multiple computers, I’ve “restored” the catalog multiple times. When I’ve done so, I’ve wanted to keep my picture file structure, so I selected that option in the restore. However, instead of restoring to the C: drive, I restored to C/Users/me/Pictures…so you probably know the situation. My picture files are now in C:Users/me/Pictures/users/me/Pictures/users/me/Pictures/MyAlbum/[Various folders]. It’s ugly and a pain to deal with. Is there any way to move the source files from:
    C:Users/me/Pictures/users/me/Pictures/users/me/Pictures/MyAlbum/[Various folders]
       To
    C: Users/me/Pictures/[Various folders]
    I know I can do this one pic at a time from within PSE, but can I do something as a batch while maintaining the "various folders" with names indicating dates and topics? At this point, I cannot simply backup and restore at the C: level because the damage is done! The file structure is already 11+ folders deep!!
    Thanks!
            Ken

    In the Organizer, go to Display > Folder Location view, where you can move entire folders (and all their subfolders) by drag-and-drop in the left-hand pane.  Drag the folder:
    C:/Users/me/Pictures/users/me/Pictures/users/me/Pictures/MyAlbum
    to the folder:
         C:/Users/me/Pictures/
    This will shorten the folder path to:
    C:/Users/me/Pictures/MyAlbum

  • How do I stream purchased movies to my Macbook Pro if I've already downloaded them and moved the source files to an external desktop hard drive and I'm away from home?

    I recently added a number of movies to my iTunes library by redeeming digital copeis that came with Blu-rays. Due to limted disc space on my MacBook Pro, and for safe keeping, once I downloaded the movies, I moved the source files to an external desktop hard drive. When I'm home and I'm able to access that external HD via my home network, I'm able to watch the movies without an issue. However, if I'm away from home and I want to watch them, I'm not sure how to do that. I thought I could "stream" purchased movies from within iTunes  - even after downloading them - using "iTunes in the Cloud" but can't figure out how to do that, or it simply isn't possible.
    What are my options?

    I understand that I can't play my downloaded movies when my external HDD is not connected becuase iTunes is looking for the downloaded files. This is not the issue. The issue is that because my HDD is not connected (as in when I'm away from home) I'd like to be able to stream the movies via the cloud.
    If I hadn't downloaded the movies when I redeemed my codes, would I have been able to keep the movies online via Apple iCloud and watched them anytime by streaming them or must the movies be downloaded in order to be viewed on my MacBook?  I read that Apple allows movies purchased (or redeemed) via iTunes to be stored in the cloud via Apple iCloud so that they can be viewed any time, on any device.  IF this is the case, how does it work? From what I can see, it looks like movies can only be "streamed" from the cloud when useing Apple TV; on my iPhone and MacBook Pro, it looks like they need to be downloaded in order to be viewed.
    Can someone clarify this for me?
    Also - Michael - when you said that If I've already downloaded the film but I'm away from my external HDD I should "Delete the entry from the iTunes library so iTunes only sees the iTunes in the Cloud version", what exactly would this mean? Would this mean that I could then stream the movie from the cloud or would I have to re-download it to my Mac's internal HDD in order to watch it?
    Many thanks!

  • How I can diable in firefox dialog box "download error could not be saved, because the source file could not be read. " when file not downloaded

    How I can diable in firefox dialog box "download error could not be saved, because the source file could not be read. " standart download manager when file not downloaded

    It is possible that anti-virus software is corrupting downloaded files or is interfering otherwise.
    Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
    See:
    *http://kb.mozillazine.org/Unable_to_save_or_download_files
    You can try to set the browser.download.manager.scanWhenDone pref on the <b>about:config</b> page to false.
    *http://kb.mozillazine.org/about:config

  • HT1026 When I do this a copy is created, and when I try to move the old file to trash I get a warning that this clip will no longer be visible in my project. How do I make the drag and drop move the clip and not just make a copy?

    In Imovie 2008 when I drag an event to another drive, the event is copied and not moved. Thereafter if I try to move the original clip to trash I anm warned the clip will no longer be accessible in the project it is linked to. How do I get to move the clip and keep it connected to the project?

    I have iPhoto '09. The problem occurs when I try to move a photo from iPhoto onto a document or anywhere. I click on the photo and try to drag it to the document. When I do this a message box pops up saying that the file cannot be opened because it is empty. This only happens with a small number of photos but I just don't understand the fact that I can see these photos (and print them but only directly from iPhoto) but I can't do anything with them since, for some reason, the computer is seeing the file as empty.
    Hope that helps. Thanks.

  • How do I save PDF files by default to the folder of the source file?

    How do I save PDF files by default to the folder of the source file with Acrobat 9.0.0 Standard?

    I am not seeing that behaviour. If I right-click a link to a .pdf file, I get the file saved with the original filename.
    Maybe one of the settings in about:config controls that?
    pdfjs.previousHandler.preferredAction is a setting that has a value of 4 with my setup. I have no idea what that means, and I could not find any explanation anywhere. You could try using different numbers for that value and see if any make any difference. Why has nobody bothered to explain that setting anywhere?

  • How can I change the source file so it is direct from external hard drive?

    I am trying to make a movie on imovie of a snowboarding trip that I went on, there is around 80 to 100 gig of mp4 movies that will not fit on my computer that I have stored on my external harddrive. I had the movie half finished then found I could do no more as I had no space left in my mac. I had to delete everything and start again but I'm not doing this until I can find a way of changing the source file so I can take them direct from my external hard drive as to not use up all my computers available space. I have moved imovie to my external hard drive but it still tries to read from a movie file on my mac, how can I change that so it will read from a source file on my external hard drive, is it possible?? Can someone help me??

    Hi Bengt, Thanks for your input, much appreciated.
    I have a WD 1TIG hard drive and are using usb connection, is it possible to use fire wire with these? I have had trouble with a lot of the videos I Imported, once they downloaded the file in the viewer window showed up blank and when I mouse over them it places a picture of another file in the window and wont drag and drop into the movie window, like their corrupted or something? Had to delete just about all of them and start again. Also is it possible to select a bunch of videos in the viewer window as to change the dates to the correct dates? All I have been able to do is "select all" which is no help.

  • Windows setup could not process the Catalog setting

    Hi, I'm trying to deploy an image of Windows 8 Embedded using WDS (Windows Server 2012) and I find this message in client machine. It appears while boot image is loading...
    I'm using an *.xml file to make an unattended installation, that I select from Client tab on my WDS server.
    If I don't use any file installation is performed correctly.
    Full message is "Windows setup could not process the <Catalog> setting in the unattend answer file.
    See setup log files under [X:\Windows\panther] for details."
    However, when I check this folder in Windows Server there isn't any updated log file...
    My unattend.xml file contains:
    <?xml version="1.0" encoding="utf-8"?>
    <unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="windowsPE">
    <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <SetupUILanguage>
    <UILanguage>en-US</UILanguage>
    </SetupUILanguage>
    <InputLocale>en-US</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UILanguageFallback>en-US</UILanguageFallback>
    <UserLocale>en-US</UserLocale>
    </component>
    <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DiskConfiguration>
    <Disk wcm:action="add">
    <CreatePartitions>
    <CreatePartition wcm:action="add">
    <Order>1</Order>
    <Type>Primary</Type>
    <Size>25000</Size>
    </CreatePartition>
    <CreatePartition wcm:action="add">
    <Order>2</Order>
    <Extend>true</Extend>
    <Type>Primary</Type>
    </CreatePartition>
    </CreatePartitions>
    <ModifyPartitions>
    <ModifyPartition wcm:action="add">
    <Active>true</Active>
    <Format>NTFS</Format>
    <Label>System</Label>
    <Letter>C</Letter>
    <Order>1</Order>
    <PartitionID>1</PartitionID>
    <Extend>false</Extend>
    </ModifyPartition>
    <ModifyPartition wcm:action="add">
    <Active>true</Active>
    <Extend>true</Extend>
    <Format>NTFS</Format>
    <Label>Media</Label>
    <Letter>D</Letter>
    <Order>2</Order>
    <PartitionID>2</PartitionID>
    </ModifyPartition>
    </ModifyPartitions>
    <DiskID>0</DiskID>
    <WillWipeDisk>true</WillWipeDisk>
    </Disk>
    </DiskConfiguration>
    <WindowsDeploymentServices>
    <Login>
    <Credentials>
    <Domain>*********</Domain>
    <Username>Administrator</Username>
    <Password>*********</Password>
    </Credentials>
    </Login>
    <ImageSelection>
    <InstallImage>
    <ImageGroup>ImageGroup1</ImageGroup>
    <ImageName>TCImage</ImageName>
    <Filename>Install.wim</Filename>
    </InstallImage>
    <InstallTo>
    <DiskID>0</DiskID>
    <PartitionID>1</PartitionID>
    </InstallTo>
    </ImageSelection>
    </WindowsDeploymentServices>
    </component>
    </settings>
    <cpi:offlineImage cpi:source="wim:c:/discwin8e/sources/install.wim#Windows Embedded 8 Standard" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
    </unattend>
    Anyone know how to fix it?
    Regards

    Well, the setuperr.log contains (Check next image link, I can't add it using hyperlink or image):
    http://oi61.tinypic.com/sxkjt5.jpg
    I have tried to add a Catalog component, but I don't know that I should write in "sourceLocation".
    Regards

  • In trying to update I received this message: Firefox 3.6.3(2).dmg.part could not be saved, because the source file could not be read.

    In trying to download an update I first received: "There were problems checking for, downloading, or installing this update. Firefox could not be updated because: No data was received (please try again)" It also gave a link to download manually. When I tried from the Firefox website I got: /Users/(deleted for privacy)/Desktop/Firefox 3.6.3(2).dmg.part could not be saved, because the source file could not be read.
    Try again later, or contact the server administrator. I tried this 3 times.
    == This happened ==
    Not sure how often
    == Mon around 11 am, central time, May 17, 2010

    I have tried downloading the file several times and get the same message: "No data received." I have no other system problems, I navigate well to other sites, but I'm unable to download this upgrade. Any suggestions?

  • How do I relink my video files when the source files are located in an AVCHD folder structure?

    I am using FCP X 10.1.1 and I was completely done with editing a simple multicam video for a choir track and when I was exporting it it failed. I re-opened FCPX and found that there are several missing files, when I had just been working with them just a second ago! I know about relinking video files, but when I try to locate the source files (knowing where they are), the browser will not let me select ACHD file contents to get at the video files. Also, I cannot open the Library file for my project either.
    Here is a snap shot:

    If it comes down to it, use clip wrap to carve your .mov files out of the SD. I am confused tho - if you were originally able to import all you needed and still have the original media ? Why can't you do it again to add other clips? To "get in" to your Library, control click on it>show paskage... but do NOT MOVE anything only copy.
      Perhaps soeone else can shed light on this?

Maybe you are looking for