How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?

How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?
I have Direct Access implemented in my environment. I have Windows 8.1 machine connecting through direct access.
I want to manage the windows 8.1 through SCCM. How do I setup IPV6 boundary. Can someone guide me through?
Below are the Windows 8.1 client IP Configuration
C:\Windows\system32>ipconfig
Windows IP Configuration
Wireless LAN adapter Local Area Connection* 3:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Wireless LAN adapter Wi-Fi:
   Connection-specific DNS Suffix . : home
   Link-local IPv6 Address . . . . . : fe80::7466:11a5:39ed:ffb0%4
   IPv4 Address. . . . . . . . . . . : 192.168.1.5
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.1.1
Tunnel adapter isatap.home:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : home
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fd:1494:1339:93d6:439c
   Link-local IPv6 Address . . . . . : fe80::1494:1339:93d6:439c%9
   Default Gateway . . . . . . . . . :
Tunnel adapter iphttpsinterface:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:e1a7:9cc8:c3c7:d819
   Temporary IPv6 Address. . . . . . : fd64:fc00:d17b:1000:206c:f857:ddbe:2f2b
   Link-local IPv6 Address . . . . . : fe80::e1a7:9cc8:c3c7:d819%10
   Default Gateway . . . . . . . . . :
Below are the IPConfiguration details for Direct Access server
C:\Windows\system32>PsExec.exe \\MURA01 ipconfig
PsExec v1.98 - Execute processes remotely
Copyright (C) 2001-2010 Mark Russinovich
Sysinternals - www.sysinternals.com
Windows IP Configuration
Ethernet adapter Ethernet:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:3333::1
   Link-local IPv6 Address . . . . . : fe80::b1ad:1c29:b4a:9125%15
   IPv4 Address. . . . . . . . . . . : 10.192.1.25
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.192.1.1
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter isatap.{3D6A5E86-D85A-46C8-B69B-FFCF6D5D849C}:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1:0:5efe:10.192.1.25
   Link-local IPv6 Address . . . . . : fe80::5efe:10.192.1.25%18
   Default Gateway . . . . . . . . . :
Tunnel adapter 6TO4 Adapter:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter IPHTTPSInterface:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::1
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::2
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:2552:e9f8:87d3:ed8e
   Link-local IPv6 Address . . . . . : fe80::2552:e9f8:87d3:ed8e%20
   Default Gateway . . . . . . . . . :
ipconfig exited on MURA01 with error code 0.
Below are the IPCONFIG Details for SCCM Server:
C:\Windows\system32>PsExec.exe \\sccm01 ipconfig
PsExec v1.98 - Execute processes remotely
Copyright (C) 2001-2010 Mark Russinovich
Sysinternals - www.sysinternals.com
Windows IP Configuration
Ethernet adapter Ethernet:
   Connection-specific DNS Suffix . :
   Link-local IPv6 Address . . . . . : fe80::9f0:86f9:441d:bc07%12
   IPv4 Address. . . . . . . . . . . : 10.192.1.30
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.192.1.1
Tunnel adapter isatap.{0749E47D-AE0A-4D47-9D37-BDDC848E56F6}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
ipconfig exited on sccm01 with error code 0.
What will be the IPV6 values to configure boundary?

Depending on how the clients connect use the IPv6 prefix of their 6to4, Teredo, and/ or IP-HTTPS tunnel. Just keep in mind that it could become a long list...
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Similar Messages

Issue getting WDS to Install for PXE in SCCM 2012 SP1 Primary Site

Hi All
I'm trying to get PXE boot working from our SCCM 2012 box but it never actually gets to the point of installing WDS when I check the box for PXE booting. I don't have SMSPXE.log since it never gets to that point and the distmgr.log never reaches
that point either. I've tried
uncheck pxe boot option - restart - re-check
uncheck pxe-boot - restart - install wds - leave it unconfigured - reboot - check pxe boot
uncheck pxe-boot - uninstall the vcredist 2008 packages - rebooting - install vcredist - check pxe boot option
the above with installing wds unconfigured
Below is the relevant portions of the distmgr.log file after I enable the pxe boot option no matter what manner of software is installed. We are running it on a VM in a Hyper-V 2012 enviornment in Windows 2008 SP2 x64. This issue is similar to this link
WDS PXE Secondary Site Issues but mine is on the Primary Site.
ConfigureDP SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:09 AM 4008 (0x0FA8)
DP registry settings have been successfully updated on TUSC2012.TALISKERUTAH.LOCAL SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
STATMSG: ID=9500 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=TUSC2012.TALISKERUTAH.LOCAL SITE=001 PID=2728 TID=4008 GMTDATE=Thu Mar 28 17:48:10.083 2013 ISTR0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
STATMSG: ID=9503 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=TUSC2012.TALISKERUTAH.LOCAL SITE=001 PID=2728 TID=4008 GMTDATE=Thu Mar 28 17:48:10.084 2013 ISTR0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
ConfigurePXE SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
CcmInstallPXE SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
RegQueryValueExW failed for Software\Microsoft\SMS\DP, PxeInstalled SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
RegReadDWord failed; 0x80070002 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
Running: C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /l C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
Waiting for the completion of: C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /l C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
Run completed for: C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /l C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
Created the DP mutex key for WDS. SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
Finding Wimgapi.Dll SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
MsiEnumRelatedProducts failed SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
FindProduct failed; 0x80070103 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
MsiEnumRelatedProducts failed SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
FindProduct failed; 0x80070103 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
GetFileAttributesW failed for SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
FindWimgapiDll failed; 0x80070002 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
Running: msiexec.exe /quiet /i c:\program files\microsoft configuration manager\wim\wimgapi.msi /log c:\program files\microsoft configuration manager\wim\wimgapi.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
Waiting for the completion of: msiexec.exe /quiet /i c:\program files\microsoft configuration manager\wim\wimgapi.msi /log c:\program files\microsoft configuration manager\wim\wimgapi.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:29 AM 4668 (0x123C)
Created policy provider trigger for ID 16777217 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:29 AM 4656 (0x1230)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:34 AM 4668 (0x123C)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:39 AM 4668 (0x123C)

HI again, sorry for the late reply.
By saying that WDS don't get configured, I mean that when i enabled the PXE functionality, the WDS role got installed but the folder remote install wasn't created.
I ahve now actually gone back to an earlier snapshot from before I started play with the PXE settings of the VM and now nothing happens when activating PXE on the distribution point, but not even the smspxe.log is created.
The Account used is a local admin and the distribution point is located on the primary site server.
EDIT: in the events log, it states the following:SMS_SITE_COMPONENT_MANAGER on computer XXX.XXXX.XXX reported: SIte comoponent Manger failed to to install on this site system.
On error (source: MsiInstaller) below:
Product Application Web Service -- Internal Error 25001. 80070490
I havent mentioned it earlier, but the Server OS is Server 2012.
I hope this might help you help me :)

Configure SUSDB_log.ldf Autogrowth Size on SCCM 2012 Standalone Primary Site Server

I have configured the rest of my .ldf log files for SCCM use according to best practices by SCCM MVPs, but I have not read anywhere that states how I should go about configuring the auto growth for the WSUS database log file (susdb_log.ldf) itself.
If someone can offer some guidance here, I would greatly appreciate it.
Thanks

Thanks Torsten.
So after I run the first full sync, I can just use that value to set the initial size like you stated and then use some other value to set the growth rate? There is only about 1,000 clients in this organization and I want to get this WSUS db log file configured
prior to installing the SCCM primary site on the server. I have used Kent Agerlund's instructions on pre-configuring the SCCM 2012 R2 database and everything looks good there, but just wanted to know how to go about NOT using that 2TB default limit on the
SUSDB_log. What is a good rule of thumb to use to determine the file growth value? Like 2x or 3x the initial value size?
Thanks

I wan't setup for sccm 2012 read only console

i wan't setup for sccm 2012 read only console

There is role read only analyst please assign same to user or group.

How to Custom Report using sql server report builder for SCCM 2012 SP1

Hi ,
I am new to database, if i want to create a manual report using sql server report builder for SCCM 2012 SP1, what step should i take.
i want to create a report in which computer name, total disk space, physical disk serial no come together. i already added class (physical disk serial no.) in hardware inventory classes. refer snapshot

Hi,
Here is a guide on how to create custom reports in Configuration Manager 2012, it is a great place to start, change to the data you want to display instead.
http://sccmgeekdiary.wordpress.com/2012/10/29/sccm-2012-reporting-for-dummies-creating-your-own-ssrs-reports/
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Using a custom certificate store for SCCM 2012 clients and primary site server

I have read what seems to be all the pki related documentation out there for SCCM 2012. I have a PKI infrastructure up and running issueing certificates with an offline root through group policy autoenrollment. The problem that i'm faced with is we are migrating
from SCCM 2007 that was in native mode and we chose not to use the CA that we used for the old SCCM environment. When the clients attempt to communicate with the M.P. it runs through all of the different certificates and adds a tremendous amount of overhead
to the M.P. We will have ten's of thousands of clients by migration end. Could someone please point me to a document that goes over how to leverage a custom certificate store that I could then tell the new 2012 environment to use? I know that it's in there,
I've seen it in the console. The setup is one primary site server with SQL on box and the pki I just mentioned as well as the old 2007 environment that is still live.
I read that you can try and use SAN as a method of identifying the new certs but I haven't found a good document covering exactly how that works. Any info you could provide I would be very grateful for. Thanks.

Jason, thank you for your reply. I'm getting the impression that you have never been in the situation where you had to deal with 2 different PKI environments. Let me state that I understand what your saying about trust. We have to configure the trusted root
CA via GPO. That simply isn't enough, and I have a valid example to backup this claim. When the new clients got the advertisement and began the ccmsetup process I used the /pki switch among others. What the client end up doing was selecting a certificate that
had the longest validity period which was issued by our old CA. It checked the authentication chain, found it to be valid and selected it for communication. At that point the installation failed, period, no caveats as you say. The reason the install failed
because the new PKI infrastructure is integrated into the new environment, and the old is not. So when you said " that
are trusted and they can use *any* cert that is trusted because at the end of the day, there is no
difference between two valid certs that have the same purpose as long as they are trusted. "
that is not correct. Both certs are trusted, and use the same certificate template, but only one certificate would allow the install to complete successfully.
Once I started using the CCMCERTISSUERS
switch the client install went swimmingly. The only reason I'm still debating this point is because someone might read this thread see your comments and assume "well I've got my new PKI configured as a trusted root CA, I should be all set" and their
deployment will fail, just as my pilot did.
About Intune I'm looking forward to doing a POC in the lab i built with my Note 3. I'm hoping it goes well as I really want to have our MDM migrated into ConfigMgr... I think the
biggest obstacle outside of selling it to management will be the actual device migration from the current MDM solution. From what I understand of the enrollment process manual install and config is the only path forward.
Thanks Jason for your post and discussion.

SQL 2012 Enterprise SP1 installation for SCCM 2012 R2

I am just starting to install SQL 2012 with SP1 Enterprise for SCCM 2012 R2.
Does anyone have a step by step guide for this install please
I am planning to install SQL 2012 with SP1 Enterprise as a physical install which I intend to geo cluster later on
Also I am thinking of installing WSUS on a separate server and get my SCCM 2012 servers (1 primary and 3 secondary) to use this server - would appreciate some help on how this can be setup as well

That doesn't make sense to me. Both versions are fully supported on virtual and physical platforms.
Also, I'm with Garth - local SQL all the way.
Here are my thoughts on the subject
http://www.gerryhampsoncm.blogspot.ie/2013/10/configmgr-sql-some-tips.html
ConfigMgr is not a real-time product like Exchange, for example. A certain amount of downtime can be tolerated. I would spend more time implementing a robust backup solution, rather than trying to implement high availability.
You should be able to recover a ConfigMgr site from SQL backup in a couple of hours.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Configuring Reporting services for SCCM 2012

Hi,
I just finish create SQL reporting services ( configure Database, report manager URL) in SQL 2008 R2 for SCCM 2012. When I open the Report option in SCCM console (Monitoring --> Report), no report listed there and then I try to add in Reporting service
point for it, but get an error message
"There is a problem connecting to the specific reporting server. Please check the connection and make sure SQL reporting service is running on the specified server"
I manually browse to http://sqlserver/reportserver or
http://sqlserver/reports , that is no any folder exist there (I assume when I configure reporting service it will automatic create a folder for it with all report inside?). Anyone can guide me on how to solve this issue?
Regards,

Hi,
hi ,
I am new to SCCM 2012 group and i have knowledge on sccm2007. i want to discuss some issue what i have with SCCM2012 installtion. The issue is my machine got rebooted while installing sccm 2012 SP1.i have already installed all the prerequisites for SCCM2012.i
am installing sccm2012 on Hyper-V machine.
Please see my system configuration below:
DomainController(2008R2 server) : 512MB RAM, AD things and DNS ,DHCP has installed on it.
System center server(2008R2) : 1028MB RAM , Sql 2008 server installed on it.
i tried to install it many times but still i got the same issue.
Could anybody please help me with this ?
This is a new question. So please ask this question on a new thread in this forum.
Thank you.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Unable to install Cumulative Update 2 for SCCM 2012 R2

Hi,
I am trying to install the CU2 update for SCCM 2012 R2 and I am getting the following error during prerequisite checks:
Server update status: This update applies to product version 5.0.7958. The installed version on this computer is 5.0.7804.1000. This update is not applicable to this computer.
Console update status: No serviceable configuration manager role was found on the local system.
Can anyone provide me some guidance or thoughts on how to get to the correct version to install this update?
Thank you

You are running
ConfigMgr 2012 SP1 – 5.00.7804.1000 - build 7804
The CU2 you are trying to apply is for SCCM 2012 R2.
http://www.systemcenterdudes.com/sccm-2012-version-numbers/
For SP1 the latest CU is CU5 : http://support.microsoft.com/kb/2978017/en-us
Benoit Lecours | Blog: System Center Dudes

How to setup the RV120W for quickvpn

Hello,
The PPTP client from Windows 7 is not working with this router; therefore I would like to try the quickvpn.
Is there any paper from Cisco explaining how to setup the RV120W for quickvpn ?
Thanks for any help

User Guides for thee rv120W are here:
http://www.cisco.com/en/US/docs/routers/csbr/rv220w/quick_start/guide/rv220w_qsg.pdf
http://www.cisco.com/en/US/docs/routers/csbr/rv120w/administration/guide/rv120w_admin.pdf
and theres some more stuff over on my site:
http://www.linksysinfo.org/index.php?forums/cisco-small-business-routers-and-vpn-solutions.49/

Problem to generat an report on an SSRS for SCCM 2012 R2 SP1. I got error has occurred during report processing.

Hi,
Problem to generat an report on an SSRS for SCCM 2012 R2 SP1. I got error has occurred during report processing.
In general it is no problem to generat SSRS reports, but an custom one i get issue with.
The Error:
An
error has occurred during report processing. (rsProcessingAborted)
Query
execution failed for dataset 'DataSet1'. (rsErrorExecutingCommand)
ExecuteReader:
CommandText property has not been initialized

Hi SaiTech,
According to your description, when you render report on SCCM 2012 R2, you got the error message.
According to my knowledge, the issue can be caused by following reasons:
Select permission not granted to ConfigMgr reporting account. We need to open the SQL management console and open the properties dialog box of configmgr db, grant select and execute permission to ConfigMgr reporting account.
Reporting Services Web Service URL or Report Manager is false. Make sure Web Service URL and Report Manager URL are correct. Restart SMS_Executive service and reinstall Reporting Service Point, then please render the report again.
Report timeout. Increase query and report timeout.
If the problem remain unresolved, please provide detailed information of SRSRP.log (default location: %programfiles%\Microsoft and Configuration Manager\Logs) and reporting services error log(default location: %programfiles%\Microsoft SQL Server\<SQL
Server Instance>\Reporting Services\LogFiles), it will help us move more quickly toward a solution.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

Any major changes to the database for SCCM 2012 and Reporting?

I'm in the process of migrating my custom reports from SCCM 2007 to SCCM 2012. I wonder if all the tables / views in SCCM 2007 are the same in SCCM 2012 for my reporting purposes? So far everything I've migrated over appears to work without a problem.
Orange County District Attorney

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
The SQL schema for SCCM 2012 has been released here.
https://technet.microsoft.com/en-us/library/dn581978.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012: enable powershell execution policy for SCCM 2012 console

Hi,
I always get stuck settings up the remote sccm 2012 powershell (cd psdrive sitecode:). Maybe not a real sccm 2012 question but Powershell but wonder what steps you take to make it work (it works on our production environment, setting up in a lab always gives
me headaches, will defintely write the solution down this time :-)).
Please advise what the steps are in configuring remote powershell for SCCM 2012.
1.my personal account "Myuser" has admin-rights in sccm 2012
2.I can open Powershell logged on to the sccm 2012 server then opening sccm 2012 console, connect via powershell
3.however, when I connect remote to the sccm server, I get the error:
. : File C:\Users\Myuser\Documents\WindowsPowerShell\Microsoft.PowerShell_profile.ps1 cannot be loaded. The file C:\Use
rs\MyUser\Documents\WindowsPowerShell\Microsoft.PowerShell_profile.ps1 is not digitally signed. You cannot run this scr
ipt on the current system. For more information about running scripts and setting execution policy, see about_Execution
_Policies at http://go.microsoft.com/fwlink/?LinkID=135170.
4.So I connect to the sccm-server and ask for the execution policy to unrestricted, I get this:
set-executionpolicy unrestricted
[Y] Yes [N] No [S] Suspend [?] Help (default is "Y"): y
Set-ExecutionPolicy : Windows PowerShell updated your execution policy successf
ully, but the setting is overridden by a policy defined at a more specific scope
There is no policy which sets any powershell configs.
Please advise.
J.
Jan Hoedt

Those client settings are only for the actions performed by the ConfigMgr client. Normal PowerShell actions are restricted to the configured execution policy on the machine.
Have a look at this post:
http://blogs.msdn.com/b/pasen/archive/2011/12/07/set-executionpolicy-windows-powershell-updated-your-execution-policy-successfully-but-the-setting-is-overridden-by-a-policy-defined-at-a-more-specific-scope.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

How to setup SSL cert for SharePoint apps in a three tier farm with nlb

I am having trouble understanding how to setup the SSL certificate on SharePoint apps or in general its configuration

Please check the below thread..
https://social.technet.microsoft.com/Forums/sharepoint/en-US/53465d30-10b2-48c9-9541-5ade738156b4/how-to-setup-ssl-cert-for-apps
Don't forget to mark it as an Answer if it resolves your issue and Vote Me as helpful if it useful.
Mahesh

How to setup Data guard for SAP database?

Can someone please tell me how to setup data guard for SAP databases?
Thanks,
Abhi

Hi Abhi,
have a look at OSS 105047 - Support for Oracle functions in the SAP environment you find this under
14
Oracle Data Guard
You can use "Physical Standby".
You cannot use "Logical Standby".
You are allowed to use Fast Start Failover (FSFO) but SAP Support is not provided.
You can use Data Guard Broker.
You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
Maximum Protection causes the primary database to terminate if problems occur in the standby database.
And here you find on Oracle white paper from 2010 http://www.oracle.com/us/solutions/sap/wp-ora4sap-dataguard11g-303811.pdf
Perhaps some SAP user have answers for you http://scn.sap.com/community/oracle/content?query=guard
regards
Kay

How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?

Similar Messages

Maybe you are looking for