How to show the ellipse found in the IMAQ shape detect to the image

I have come out with the VI which had detected the ellipses. The ellipse result shown in the last part just only shows the number of matches and also the ellipses information. The problem is I wanted the ellipse found shown in the image to show where is the ellipse that detected in the LABVIEW but not only showing me the number of ellipse detected. Because I wanted to know the ellipse detected in the image provided that other shape is also in the image. Sorry for the bad English maybe I don't know use English to state my question correctly. Thank you for the helping I stuck in the last part to complete my task.
PS: I have attach my VI and image that I used in below. The minimum score set it to 990 and it will show the result of 3 numbers of matches. Anyone know how to locate the 3 ellipse in the image? Thank you for the help
Attachments:
oval 1.jpg ‏25 KB
testing.vi ‏51 KB

Uploaded the wrong vi in the previous.
This should have been the one uploaded.
Sorry.
Attachments:
testing_1.vi ‏58 KB

Similar Messages

How to Show the Image as thumbnail in j2me mbile

Hi Experts
Please I really need help..
I am developing java mobile application about the file sharing between mobile over Bluetooth. And I hve done to much work on it, But there are some featurs I have to add it in my application.
- when I found the Image I want to see it as thumbnail or as small size before save it.
please if you have any information I really need help
[email protected]
Kind Regards
Thank you so much

If you use an Applet:
Use the MediaTracker-class to ensure that all images are loaded when the program start
If it's an application:
Use javax.imageio.ImageIO.read() to load images. This method is blocking, i.e. returns
when the image is loaded.
/n

How to show the quantity in decimal in MIGO

Dear expert,
How to show the quantity in decimal in MIGO?? for example in material BOM the quantity is 12.480 but the quantity in MIGO is 13. it's automatically rounded.
what should I do to show the decimal point in MIGO?
Thanks
Pauline

Hi,
    Please check in su3 -
defaults (Tab) -
Decimal Notation.
    Change the decimal notation and logoff and login to apply the changes.
    I think it may help you.
Regards
Sreedhar Reddy

How to show the checked-out symbol in list of files in a folder

Hi,
When the folder is selected it is showing all the files in that folder. But, the user would not know which file had been checked out. In general it should show the lock symbol (As similar to Documentum, webtop) when a file had been checked out by some other user.
How to show the lock/key column in list of files. Any other way to find a file had been checked out or not instead of going into the content information.
Also, how do we add additional columns like author etc... to the list of files screen in UCM?
Please help

You should double check, but I don't believe that the check-out info is in the resultset. Because that information isn't available, the state of each row in the search results table cannot be defined. So, the first hurdle would be to add that info to the dataset.
The second hurdle would be to alter the UI to leverage that info (e.g., the key icon when checked out).
If you're looking to alter the folder views, then look to the COLLECTION_DISPLAY service & related template. Other views (e.g., search results) have different templates and backing services.
-ryan

How to show the login user Id in the upper right corner of each page?

Hi,
I was wondering how to show the login user Id in the upper right corner of each page?
thanks so much!
cchu

Cchu,
The easy question first: applying a style to the welcome message. If you look at the page source, you'll see that #WELCOME_USER# is expanded to <div class="app-user">Welcome: DEMO</div> So to change the style of the message, you need to tweak the style of the app-user div in your CSS, or override it in a style block in your HTML header.
Now, the tougher question: why the text is wrapping for you. And, really, without seeing your entire page, I can't give a full answer. But I'd suggest that what's most likely happening is that the table column you're putting it in is too narrow, so it's wrapping; try replacing the td tag with <td nowrap="nowrap"> This will force the column to be wide enough to display the full message, but might result in weird formatting elsewhere on the page (depending on what all is in your table).
-David

How can show the result of a measuring that is done in a sub-program in my main panel?

How can show the result of a measuring that is done in a sub-program in my main panel?

In your subvi, wire the result(s) you want to ouput to the main program to an output terminal on the connector pane.
For a tutorial on subvi's, search the help for "connector panes" anc click on tutorial.
~Tim

How to show the contents of a dropdown list with different colors

Hi,
I have a drop downlist on my dialog. I want to show each of its text attribute and its back ground with different color.
Suppose I am showing 4 strings in the dropdown like Name1, Name2, Name3 and Name4, then how to change the color of each name and its background.
Please let me know if it is possible.

If the above asked is not possibe can we have an alternative as mentioned below :-
A dropdown similar to the one shown in "Edit->Preferences->Grids->Colors" having our own text names instead of the default color names.
So that I can show some color symbol and a text name along with it in my dropdown.
One more query, is it possible to show the images/giff/png files in dropdown ?

How to show the message text for constraint violations

Hi all,
In a batch procedure a primary key is violated (ORA-00001). For the primary key, a message is recorded in the TAPI and the message table.
How to show the enduser a proper message text instead of the ORA-00001.
We are using Designer 6 with Headstart 2.1.2.
Thanks in advance,
Joep

Joep,
If you try to insert the record by calling the ins procedure of the Table API, you will see that it will result in an ORA-20998 message, which means that the error message details reside in the CG$ERRORS plsql message table. These messages can be extracted e.g. with the messages.sql script, shipped with headstart.
If you do not want to rewrite your direct DML (insert into [table name] ...) in the complexer calls to the TAPI services, you might want to user VAPI's for it. In fact, this is one of the major advantages of using VAPI's.
The CDM guidelines volume, chapter 6 states that:
<I>The front end no longer needs to trap declarative constraint
errors (Primary Key, Unique Key, Not Null and Check
Constraint violations) and replace them with a user-friendly
error. The View API issues DML statements through the TAPI
and the TAPI traps all declarative constraint errors, and puts
user-friendly message on the stack, in the preferred language of
the user! Fore more information, see the section, Completeness
of Rule Violations Reported in Front End, in this chapter.</I>
So the only thing you need to do is generate VAPI's, and trap the ORA-20998 message (qms$errors.qms$exception) in an exception handler, where you retrieve the user friendly messages from the message stack!!
Regards, Marc

Upon launch of Lightroom after initial instalation a warning came up that said lightroom needs to create temporary files and cant open. The it opened and the catalog i imported will not show the images. How can I give permission? Running windows 8.1 64

Upon launch of Lightroom after initial installation a warning came up that said lightroom needs to create temporary files and cant open. Then it opened and the catalog i imported will not show the images. How can I give permission? Running windows 8.1 64 bit. I have avast virus software.

Upon launch of Lightroom after initial installation a warning came up that said lightroom needs to create temporary files and cant open. Then it opened and the catalog i imported will not show the images. How can I give permission? Running windows 8.1 64 bit. I have avast virus software.

How to show the elements of an array?

How to show the elements of an array, when the array size changes every loop?
It's possible to use node property?
thanks
Vicens
Win XP/ LV7.1
Attachments:
show elements.PNG ‏184 KB

Basically it is (at least in LV8.0). There is a property "Number of Rows" which sets the number of visible rows. If your 1D array is placed horizontally, use "Number of Columns".
Using LV8.0
Don't be afraid to rate a good answer...

How to show the filter and sort capabilities in adf dynamic table

hi
how to show the filter and sort capabilities in adf dynamic table..
Pls help me

Hi
Click on a colum in your table and go to the properties pallet
make true the sortable property then you can sort the table according to that column
Thanx
Padma

How to show the drill path in the analysis

Dear Experts:
I encountered this problem when designing OBIEE dashboard:
I'm using OBIEE 11g.
I ceated a new analysis and made it to show in pie chart view.
It works fine regarts to the drill function, when I click a part of it, it automatically change to the drilled down level figure.
Whant I want to know is how to show the current level after serveral times of drilling down and drilling up.
I know that I can judge the level base on the legend or move the curs over the chart.
But to a new user, is it possible to create a variable or something above/below the chart to actively show the name of current level?
Thank you very much.
Edited by: 906129 on Jan 5, 2012 5:40 PM

How could it not be 5A?. If you have A for each member and then you select 5 members you are going to get 5A. If you don't want 5A then what do you want the Avg of A across the 5 members?
The tools are working the way they are designed to, your requirement is a little out of the ordinary. Unfortunately, Web Analysis does not have conditional logic.
Try taking my previous suggestion and adding another member in Essbase called "Count", make it dynamic calc and the formula should be ' 1; '
The purpose here is to get a value of one in the count member for each member you are going to select in your filter. So, if you select five members in the filter, Web Analysis will now return 5A and it will return the result of "Count" which will be 5. Create a calculated member that divides the 5A value by the count value 5. That will give you the average A for the 5 members, then you can divide by 12.

How to show the cover art in the sidebar?

Hej!
I just updated iTunes to the latest version and wanted to make it look like before and already managed to enable the side and status bar.
Now to my problem: I just can't find out how to show the cover art of the selected/playing song in the sidebar...
If they didn't remove this option, please let me know how to enable it.
- Julia

I was able to somehow pull the single tool column down and get it to show as a double column. I am not sure as to exactly how I did this, but I did get the double column tool box and so far it has remained. There is some gray column overlap at the bottom of the screen.

How to show the volume in a Meter?

Hello,
I m newbie in programming in java sound,
And i would like to know how to show the volume from a recording in real time in a meter? I allready have the meter but now i don´t know how to pass the volume and show in the meter.
Somebody can help me?
Thanks

844429 wrote:
..And i would like to know how to show the volume from a recording in real time.. It can never be truly 'real time' since the calculations require a 'chunk' of sound samples to produce a value. The shorter the chunk, the more arbitrary the value, but the more 'real time' it seems.
..in a meter? I allready have the meter.. (chuckle) That is the easy part.
..but now i don´t know how to pass the volume and show in the meter.In what units? dB, RMS, tuna? I did an RMS calculation for the left/right channels of a more complex audio trace. RMS is relatively easy to calculate. E.G.
/** Computes the RMS volume of a group of signal sizes ranging from -1 to 1. */
public double volumeRMS(double[] raw) {
    double sum = 0d;
    if (raw.length==0) {
        return sum;
    } else {
        for (int ii=0; ii<raw.length; ii++) {
            sum += raw[ii];
    double average = sum/raw.length;
    double[] meanSquare = new double[raw.length];
    double sumMeanSquare = 0d;
    for (int ii=0; ii<raw.length; ii++) {
        sumMeanSquare += Math.pow(raw[ii]-average,2d);
        meanSquare[ii] = sumMeanSquare;
    double averageMeanSquare = sumMeanSquare/raw.length;
    double rootMeanSquare = Math.pow(averageMeanSquare,0.5d);
    return rootMeanSquare;
}Of course, you will need to get directly into the sound data streams then convert the signal to PCM, split the channels and scale the values to a range of -1 to 1 to use that exact method shown. ;)

How to show the employee's organizational unit in remuneration statement?

Hi experts,
I'm working on a payslip,and there are two questions to ask:
1.How to show the employee's organizational unit in remuneration statement? I didn't find a right table and right field to realize it.
2.I tried to show the notification in payslip by infotype 0128, but it didn't work. Is there any tips?
Any help will be appreciated.Thanks in advance!
Alex

Hi,
You can get orgunit from Orgassignment table (pa0001-orgeh).
Otherwise you can get it from hrp1001 table. querying like
*get position of pernr.
select single sobid into v_pos
from hrp1001
where otype = 'P'
    and objid = pernr
    and plvar = '01'
   and rsign = 'B'
    and relat = '008.
    and istat = '1'
    and begda le sy-datum
    and endda ge sy-datum
    and sclas = 'S'.
*Get org unit
select single sobid into v_orgunit
from hrp1001
where otype = 'S'
    and objid = v_pos
    and plvar = '01'
    and rsign = 'A'
    and relat = '003'
    and istat = '1'
    and begda le sy-datum
    and endda ge sy-datum
    and sclas = 'O'.

In the Alarm & Event Query VI how to show the alarm data

In the Alarm & Event Query VI how to show the alarm data in the front pannel using the table or multicolumn listbox .thank you very much！！！

Hi,
Most likely there is something wrong with your specific database or your LabVIEW DSC installation. I just used the Alarm & Event Query.vi in my machine and it seems to work fine, I can see all the alarms as well as events containned in the database.
You may considerer generate another database (change the logging directory) and see if the behavior goes away. Also, make sure you have alarms and events on that database.
I could run the Alarm & Query.vi by just openning its front panel and placing the correct database in the appropriated control.

How to show the ellipse found in the IMAQ shape detect to the image

Similar Messages

Maybe you are looking for