How to show the tooltip in button

Hi,
I am using 11.1.1.4.
I want to show the tooltip as button. so which tag i want to use and show the tooltip.
Regards,Ragu

'shortDesc' will help you.
chk here
http://jdevadf.oracle.com/adf-richclient-demo/faces/components/index.jspx
Edited by: vinod_t_krishnan on Jun 6, 2011 4:02 PM

Similar Messages

How to enable the SAVE LAYOUT button?

When using CALL METHOD G_ALVGRID_HDR->SET_TABLE_FOR_FIRST_DISPLAY, how do I enable the SAVE LAYOUT push button?
It shows the Change layout button but does not allow me to save the layout as the SAVE LAYOUT button is not available.
I am using the following code but it does not show the SAVE LAYOUT button.
CALL METHOD G_ALVGRID_HDR->SET_TABLE_FOR_FIRST_DISPLAY
    EXPORTING
      I_SAVE                        = L_SAVE
      IS_VARIANT                    = LS_VARIANT
      IS_LAYOUT                     = LS_LAYOUT
      IS_PRINT                      = LS_PRINT
      IT_TOOLBAR_EXCLUDING          = I_EXCLUDE
    CHANGING
      IT_SORT                       = I_SORT_HDR
      IT_OUTTAB                     = I_OUTTAB_HDR[]
      IT_FIELDCATALOG               = I_FCAT_HDR
    EXCEPTIONS
      INVALID_PARAMETER_COMBINATION = 1
      PROGRAM_ERROR                 = 2
      OTHERS                        = 3.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Pl advise.
Thanks,
Ven

pass the variant and enable is_save = 'A'.
in my case I had to upgrade the gui also.

The option to sync apps is no longer available in iTunes, though it used to be. Can anyone tell me how to access the sync apps button please?

Can anyone tell me how to access the sync apps button please? I used to be able to select it but it is no longer visible.

You have to connect and select iPhone in computer iTunes Sidebar.
If you don't see the Sidebar, toggle it on in iTunes menu View > Show Sidebar.
Take a look at this screenshot on updating apps.

How to show the new table record after creating

I have a table form. After creating a new record to the table, the page go back to the same page. I wanta know how to show the new record after click 'Create' button. Right now, all the items will be cleared.
Thanks.

The button submits the page so just create a branch that directs to a new page (which you'll have to create if you have not already done so) after submission which directs to a new page and uses the newly generate PK to display the row you've generated. You'll need to make the branch conditional on that press of the Create button.
Phil

HT4623 I have an iPod with iOS 4.2.1 and would like to up date version 5. The pc I normally sync with has XP operating system. So I can't up date to iTunes 10. And my iPod doesn't show the software update button shown in the article. What can I do?

I have an iPod with iOS 4.2.1 and would like to up date to version 5. The pc I normally sync with has XP operating system. So I can't up date to iTunes 10. And my iPod doesn't show the software update button shown in the article. What can I do?

You cannot update it if you can't get the latest version of iTunes. Actually, the latest version of iTunes will run in XP if you have Service Pack 2. Also, you posted in the iPad forum, and your profile shows you have an iPad, but in your post, you say it is an iPod. Is it an iPad or an iPod?

I am trying to set up my newly purchased Apple TV but when I enter my network password while setting up, I am not able to enter the Submit button, any idea how to hit the visible submit button that is visible on screen but not responding?

I am trying to set up my newly purchased Apple TV but when I enter my network password while setting up, I am not able to enter the Submit button, any idea how to hit the visible submit button that is visible on screen but not responding?

You need to use the right arrow on the remote to go all the way to the right. The submit button will be highlighted and you can then press select on the remote to proceed.

How to show the quantity in decimal in MIGO

Dear expert,
How to show the quantity in decimal in MIGO?? for example in material BOM the quantity is 12.480 but the quantity in MIGO is 13. it's automatically rounded.
what should I do to show the decimal point in MIGO?
Thanks
Pauline

Hi,
    Please check in su3 -
defaults (Tab) -
Decimal Notation.
    Change the decimal notation and logoff and login to apply the changes.
    I think it may help you.
Regards
Sreedhar Reddy

How to use the cases in button action?

Hi Experts,
I want to get a prompt message if the field is empty.I got it but at the same time if the field is filled I want the other action to be performed that is to call a BAPI and give me output.How can I give two events for the same action.
How to use the cases in button action?
So, please guide me.Urgent need
Regards
Nutan

Hi Nutan,
if I understand you, then you have a simple validation. Therefore you can use the validation functionality of VC for your components. An alternative could be by writing a new ABAP RFC function module like:
BAPI Input parameters as input and BAPI output parameters as output and an additional return code or string for a message:
IF I_FIELD IS INITIAL.
E_RETURN_CODE = "THE FIELD IS EMPTY."
ELSE.
CALL FUNCTION <YOUR_BAPI>
<BAPI PARAMETERS>
ENDIF.
I hope that helps.
Best Regards,
Marcel

How to show the checked-out symbol in list of files in a folder

Hi,
When the folder is selected it is showing all the files in that folder. But, the user would not know which file had been checked out. In general it should show the lock symbol (As similar to Documentum, webtop) when a file had been checked out by some other user.
How to show the lock/key column in list of files. Any other way to find a file had been checked out or not instead of going into the content information.
Also, how do we add additional columns like author etc... to the list of files screen in UCM?
Please help

You should double check, but I don't believe that the check-out info is in the resultset. Because that information isn't available, the state of each row in the search results table cannot be defined. So, the first hurdle would be to add that info to the dataset.
The second hurdle would be to alter the UI to leverage that info (e.g., the key icon when checked out).
If you're looking to alter the folder views, then look to the COLLECTION_DISPLAY service & related template. Other views (e.g., search results) have different templates and backing services.
-ryan

How to use the standrad Refresh button in ooalv Grid?

Hai Experts ,
i write editable oo alv program its works fine. when change the data
then click save button its saved correctly, but the problem is totals of row & column not refresh when i am click the
Refresh button . Please Help how to handle the standard Refresh button in ooalv .
Thanks
Adv....

thank q u for ur reply,
when i edit the data in grid and save the data its saved successful,
but the problem is manually i calculating the totals at the end of the Row as well as at end of the columns,
when i edit the data in Grid that totals are not effected for that im using the Standard Refresh button ,
Plz help me.

How to show the login user Id in the upper right corner of each page?

Hi,
I was wondering how to show the login user Id in the upper right corner of each page?
thanks so much!
cchu

Cchu,
The easy question first: applying a style to the welcome message. If you look at the page source, you'll see that #WELCOME_USER# is expanded to <div class="app-user">Welcome: DEMO</div> So to change the style of the message, you need to tweak the style of the app-user div in your CSS, or override it in a style block in your HTML header.
Now, the tougher question: why the text is wrapping for you. And, really, without seeing your entire page, I can't give a full answer. But I'd suggest that what's most likely happening is that the table column you're putting it in is too narrow, so it's wrapping; try replacing the td tag with <td nowrap="nowrap"> This will force the column to be wide enough to display the full message, but might result in weird formatting elsewhere on the page (depending on what all is in your table).
-David

How can show the result of a measuring that is done in a sub-program in my main panel?

How can show the result of a measuring that is done in a sub-program in my main panel?

In your subvi, wire the result(s) you want to ouput to the main program to an output terminal on the connector pane.
For a tutorial on subvi's, search the help for "connector panes" anc click on tutorial.
~Tim

WiFi ON/OFF button Doen't Work, the IPod doesn't show the on/off button in the Settings- General - WiFi

After My IPod Touch 4th Geneartion was broken I had to fix the screen, which cost me a lot, after a perfect restore through the ITunes I went to connect to my IPod to the WiFi network then the WiFi ON/OFF button Doen't Work, the IPod doesn't show the on/off button in the Settings-> General -> WiFi.
And another problem I encountered during this operation was that the Games I downloaded through the ITunes doesn't work, when I click on the icon ( Game Icon) it starts an then closes in a few seconds

See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Apple wil not help since yo took the iPod apart
Try taking it apart and look for a disconnected antenna.
Installing iPod Touch 4th Generation Wi-Fi Antenna - iFixit

How to disable the select options button, while audio is playing in the question template in captivate 8?

How to disable the select options button, while audio is playing in the question template in captivate 8?

Apologies for late reply.
I mean "On Question screens audio keeps on playing even after we have selected an option or options depending on the question type and clicked Submit. How do we stop the audio on selecting an option?"

How to show the message text for constraint violations

Hi all,
In a batch procedure a primary key is violated (ORA-00001). For the primary key, a message is recorded in the TAPI and the message table.
How to show the enduser a proper message text instead of the ORA-00001.
We are using Designer 6 with Headstart 2.1.2.
Thanks in advance,
Joep

Joep,
If you try to insert the record by calling the ins procedure of the Table API, you will see that it will result in an ORA-20998 message, which means that the error message details reside in the CG$ERRORS plsql message table. These messages can be extracted e.g. with the messages.sql script, shipped with headstart.
If you do not want to rewrite your direct DML (insert into [table name] ...) in the complexer calls to the TAPI services, you might want to user VAPI's for it. In fact, this is one of the major advantages of using VAPI's.
The CDM guidelines volume, chapter 6 states that:
<I>The front end no longer needs to trap declarative constraint
errors (Primary Key, Unique Key, Not Null and Check
Constraint violations) and replace them with a user-friendly
error. The View API issues DML statements through the TAPI
and the TAPI traps all declarative constraint errors, and puts
user-friendly message on the stack, in the preferred language of
the user! Fore more information, see the section, Completeness
of Rule Violations Reported in Front End, in this chapter.</I>
So the only thing you need to do is generate VAPI's, and trap the ORA-20998 message (qms$errors.qms$exception) in an exception handler, where you retrieve the user friendly messages from the message stack!!
Regards, Marc

How to show the tooltip in button

Similar Messages

Maybe you are looking for