How to shrink the system tablespace datafile Size

iam using oracle 9i R2 and i want to reduce my datafile size but it's show's that error when i try to resize it. ORA-03297

Hi,
We can directly resize datafilesTEST.SQL>SELECT FILE_NAME, BYTES FROM DBA_DATA_FILES WHERE TABLESPACE_NAME='SYSTEM';
FILE_NAME
     BYTES
/.../dbsGNX.dbf
419430400
TEST.SQL>ALTER DATABASE DATAFILE '/.../dbsGNX.dbf' RESIZE 390M;
Database altered.
TEST.SQL>SELECT FILE_NAME, BYTES FROM DBA_DATA_FILES WHERE TABLESPACE_NAME='SYSTEM';
FILE_NAME
     BYTES
/.../dbsGNX.dbf
408944640But the minimum file size is the size of the extend the furthest in the datafile:TEST.SQL>SELECT FILE_ID,FILE_NAME FROM DBA_DATA_FILES WHERE TABLESPACE_NAME='SYSTEM';
   FILE_ID
FILE_NAME
         1
/.../dbsGNX.dbf
TEST.SQL>SELECT MAX(BLOCK_ID) MBID FROM DBA_EXTENTS WHERE FILE_ID=1;
      MBID
     25129
TEST.SQL>SELECT SEGMENT_NAME,OWNER,SEGMENT_TYPE FROM DBA_EXTENTS WHERE FILE_ID=1 AND BLOCK_ID=25129;
SEGMENT_NAME                                                                      OWNER                          SEGMENT_TYPE
I_OBJAUTH2                                                                        SYS                            INDEX
TEST.SQL>SHOW PARAMETER BLOCK_SIZE
NAME                                 TYPE                             VALUE
db_block_size                        integer                          8192
TEST.SQL>SELECT 8192*25129 FROM DUAL;
8192*25129
205856768about 200M.
Regards,
Yoann.

Similar Messages

  • RMAN duplicate target database for standby from active fails to create newname for system tablespace/datafile

    When executing 'duplicate target database for standby from active'  the system tablespace/datafile (datafile 1)  is not cloned.  All other datafiles clone successfully.  The RMAN process aborts with the following errors while attempting to clone the system tablespace/datafile.
    ORA-19558: error de-allocating device
    ORA-19557: device error, device type: DISK, device name:
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-03135: connection lost contact
    Here are the details:
    Primary is 11.2.0.2 RAC database  on an Exadata platform
    Standby is 11.2.0.2 Single Instance database (same patch level as primary) on a Red Hat Linux box
    This is an ASM to ASM duplication.
    This is not unique to this database.  We tried another database and go the same behavior - all datafiles clone successfully with the exception of the system tablespace/datafile.
    We have traced the RMAN execution and it seems to fail when it is trying to assign a NEWNAME to the system tablespace/datafile.
    We even issued an explicit SET NEWNAME command but RMAN ignored it.
    We also shutdown the primary and started is up in mount mode thinking that something had ahold of the System Tablespace/datafile.
    We also opened up the network firewall to allow permit any,any traffic.
    We increased the max_server_processes
    and added TCP.NODELAY=yes to the sqlnet.ora file.
    There seems to be some artifact present in our Primary System tablespace/data file that is preventing it form being cloned.
    checked all alert files grid, asm,  and dbhome - no abnormal messages.
    We are in the process of restoring the database from a backup but we would prefer to get this working using the 'Active Database' methodology

    I successfully created the standby database using RMAN backup and recovery.
    I started the managed recovery.  Archive logs are being sent from the primary to the standby ( I can see them in ASM), but the standby is not applying them.
    I get the following messages in the standby alert log...
    Fetching gap sequence in thread 2, gap sequence 154158-154257
    Tue Nov 26 16:19:58 2013
    Using STANDBY_ARCHIVE_DEST parameter default value as USE_DB_RECOVERY_FILE_DEST
    Using STANDBY_ARCHIVE_DEST parameter default value as USE_DB_RECOVERY_FILE_DEST
    Tue Nov 26 16:20:01 2013
    Fetching gap sequence in thread 2, gap sequence 154158-154257
    Tue Nov 26 16:20:11 2013
    Fetching gap sequence in thread 2, gap sequence 154158-154257
    Tue Nov 26 16:20:22 2013
    Fetching gap sequence in thread 2, gap sequence 154158-154257
    Tue Nov 26 16:20:32 2013
    Fetching gap sequence in thread 2, gap sequence 154158-154257
    I don't see any MRP processes:
    select process,
    status,
        thread#,
        sequence#,
       block#,
      blocks
      7     from v$managed_standby;
    PROCESS   STATUS          THREAD#  SEQUENCE#     BLOCK#     BLOCKS
    ARCH      CLOSING               2     154363          1        132
    ARCH      CONNECTED             0          0          0          0
    ARCH      CONNECTED             0          0          0          0
    ARCH      CONNECTED             0          0          0          0
    ARCH      CONNECTED             0          0          0          0
    ARCH      CONNECTED             0          0          0          0
    ARCH      CONNECTED             0          0          0          0
    ARCH      CONNECTED             0          0          0          0
    RFS       IDLE                  0          0          0          0
    RFS       IDLE                  1     145418        121          1
    RFS       IDLE                  0          0          0          0
    PROCESS   STATUS          THREAD#  SEQUENCE#     BLOCK#     BLOCKS
    RFS       IDLE                  0          0          0          0
    12 rows selected.
    SQL>  SELECT THREAD#, SEQUENCE#, APPLIED FROM V$ARCHIVED_LOG;
       THREAD#  SEQUENCE# APPLIED
             2     154356 NO
             2     154357 NO
             1     145411 NO
             2     154358 NO
             2     154360 NO
             2     154361 NO
             1     145414 NO
             1     145415 NO
             2     154362 NO
             2     154363 NO
             1     145416 NO
    11 rows selected.
    I do have the archive logs that cover sequences 154158-154257
    Crosschecked 38 objects
    Crosschecked 62 objects
    Finished implicit crosscheck backup at 26-NOV-13
    Starting implicit crosscheck copy at 26-NOV-13
    using channel ORA_DISK_1
    using channel ORA_DISK_2
    Crosschecked 2 objects
    archived log file name=+RECO_XORA/nmuasb00/archivelog/2013_11_26/thread_2_seq_154377.344.832521989 RECID=29 STAMP=832521990
    validation succeeded for archived log
    archived log file name=+RECO_XORA/nmuasb00/archivelog/2013_11_26/thread_2_seq_154378.346.832521991 RECID=31 STAMP=832521993
    Crosschecked 31 objects

  • How do you purge/compress/shrink the iPhoto11 folder/file size?

    How do you purge/compress/shrink the iPhoto11 folder/file size?
    I have been using iPhoto since iLife'05 and have always upgraded with each iteration of iLife. Without exception, I had just recently upgraded to iPhoto'11 when iLife'11 came out. Because I have used iPhoto to store all my photos and videos taken over the last 5 years or so, my iPhoto folder/file has become bigger and bigger over time and so I moved it to an external hard-drive. My main iPhoto'11 folder/file has 14,367 photos, 995 videos and is indicated to be 83 GB by iPhoto'11. But "Get Info" in Finder reports a whopping 130 GB.
    I started to think that this is getting a little crazy and I had wanted to better manage my photo collection, so I decided to "divide and conquer" this gigantic iPhoto'11 folder/file into several smaller, more manageable sized ones. So I made a duplicate copy of this gigantic iPhoto'11 folder/file onto another external hard-drive, fire-up iPhoto'11 again to delete away almost 80% of the photos and 90% of the videos. Now, my "slimmed-down" iPhoto folder/file has 3,000 photos, 75 videos and is indicated to be 6.8 GB by iPhoto'11. But despite the new "slimmed-down" status, the "Get Info" in Finder reports a still very huge 44 GB. Where did all those bulk come from? I have emptied both the iPhoto'11 Trash Can and Mac OS X Trash Can and these steps did not seemed to change anything at all.
    Therefore, I wanted to see what the "Get Info" in Finder will report if I were to delete 99.99% of the photos and video to leave just one (1) photo in iPhoto'11? Guess what is the result? My "One Photo experimental" iPhoto folder/file has 1 photo, 0 videos and is indicated to be 2 MB by iPhoto'11 yet the "Get Info" in Finder reports a mysterious 36.3 GB. There must be something hiding inside!
    Help! What can I do?

    I went on to try trashing away some of the folders and files inside and found that I could actually do it quite neatly if I go by the year which the photos are taken. After a lot of trial and error working on duplicate copy of my iPhoto '11 library, I am able to do away with all the clutter within the library and still open it normally.
    Now my 44GB obese iPhoto'11 library has been slimmed down to just a little over 7 GB (5 GB as reported by iPhoto'11) and I am just comfortable dealing with 2 GB of "don't-know-what-info" of clutter within the library.
    Remember my "One Photo Experimental" iPhoto'11 library that was 36.3 GB? I managed to bring it down to the realistic 22 MB size. This size is still double that of a brand new iPhoto'11 library I created to import 1 photo. However, it sure beat having 36.3 GB of clutter.
    So, now what I am gonna do is to "divide and conquer" the duplicate copies of my iPhoto'11 library into smaller sized ones according to their year. But I think I'll still keep the original bloated, gigantic 130 GB intact and continue to feed it with photos and videos until maybe it becomes 1 TB! Yikes!
    Anyway, million thanks for your tip and I really appreciate it! Have a Happy holidays!

  • How to create a system tablespace as  locally manged in 8.1.7

    After a good time looking for it I still haven't found an example of how to create a database with the system tablespace as locally managed in release 8.1.7
    I'm trying this, that isn't OK at all:
    create database CSR
    character set "WE8ISO8859P15"
    datafile '/home/oracle/create/CSR/system/sysCSR.dbf' size 75M
    extent management local
    DEFAULT TEMPORARY TABLESPACE tsp_temp
    DATAFILE '/home/oracle/create/CSR/temp/tempCSR.dbf'
    SIZE 80M REUSE
    logfile '/home/oracle/create/CSR/redo/redo1CSR.log' SIZE 500k,
         '/home/oracle/create/CSR/redo/redo2CSR.log' SIZE 500k,
         '/home/oracle/create/CSR/redo/redo3CSR.log' SIZE 500k;
    Can someone tell me what is wrong, please?

    I'm trying this, that isn't OK at allAre there any errors? can you explain what is not "OK"?

  • Why the system tablespace increase a lot?

    I have noticed that the system tablespace of my prod Oracle 10g R2 on AIX 5.3L reaches over the 85% warning level now, and the size has increased from ~68% to 88% of 1.6G total assigned capacity during the last 7 months. How do i find out what reason causes the increase? can I remove some "fat" out of them? or just keep increasing the size? My fresh backup AIX 5.3L system with the same 10g R2 only takes 38% of 1.6 G.

    SEGMENT_NAME SEGMENT_TYPE MBYTES
    SYS_LOB0000125172C00039$$ LOBSEGMENT 152
    C_OBJ#_INTCOL# CLUSTER 136
    I_CON1 INDEX 104
    C_OBJ# CLUSTER 96
    C_COBJ# CLUSTER 88
    HIST_HEAD$ TABLE 57
    CON$ TABLE 41
    I_COL1 INDEX 41
    C_FILE#_BLOCK# CLUSTER 38
    I_HH_OBJ#_COL# INDEX 34
    I_HH_OBJ#_INTCOL# INDEX 34
    SOURCE$ TABLE 32
    I_CON2 INDEX 27
    IDL_UB1$ TABLE 26
    I_CDEF4 INDEX 26
    I_H_OBJ#_COL# INDEX 25
    I_COL2 INDEX 20
    OBJ$ TABLE 19
    I_COL3 INDEX 19
    I_CCOL1 INDEX 19
    I saw some LOB segments in SYS; however my fresh new 10g R2 (v SE) on other AIX machine does not list those. Where are they from?
    I checked the user_lobs, Here are the tables which has LOB seg stored the system tablespace
    AW_OBJ$
    VIEWCON$
    SNAP$
    SNAP$
    TABPART$
    INDPART$
    TABSUBPART$
    INDSUBPART$
    TABCOMPART$
    INDCOMPART$
    DEFSUBPART$
    KOTTD$
    KOTTB$
    KOTAD$
    KOTMD$
    KOTTBX$
    KOTADX$
    SUM$
    SUM$
    SQL$TEXT
    METASTYLESHEET
    EXTERNAL_TAB$
    EXTERNAL_TAB$
    JIREFRESHSQL$
    AUD$
    AUD$
    FGA_LOG$
    FGA_LOG$
    PS$
    STREAMS$_DEF_PROC
    STREAMS$_DEF_PROC
    STREAMS$_DEF_PROC
    REDEF_DEP_ERROR$
    NCOMP_DLL$
    EXPIMP_TTS_CT$
    ATTRIBUTE_TRANSFORMATIONS$
    RULE$
    RULE$
    REG$
    AQ_EVENT_TABLE
    AQ_SRVNTFN_TABLE
    AQ_SRVNTFN_TABLE
    SCHEDULER$_JOBQTAB
    SCHEDULER$_JOBQTAB
    SCHEDULER$_JOB_ARGUMENT
    SCHEDULER$_PROGRAM_ARGUMENT
    SCHEDULER$_EVENT_QTAB
    KUPC$DATAPUMP_QUETAB
    KUPC$DATAPUMP_QUETAB
    KUPC$DATAPUMP_QUETAB
    KUPC$DATAPUMP_QUETAB
    KUPC$DATAPUMP_QUETAB
    KUPC$DATAPUMP_QUETAB
    KUPC$DATAPUMP_QUETAB
    STREAMS$_INTERNAL_TRANSFORM
    AQ$_MEM_MC
    AQ$_MEM_MC
    AQ$_KUPC$DATAPUMP_QUETAB_P
    AQ$_KUPC$DATAPUMP_QUETAB_P
    AQ$_KUPC$DATAPUMP_QUETAB_P
    AQ$_KUPC$DATAPUMP_QUETAB_P
    AQ$_KUPC$DATAPUMP_QUETAB_P
    AQ$_KUPC$DATAPUMP_QUETAB_P
    AQ$_KUPC$DATAPUMP_QUETAB_P
    AQ$_KUPC$DATAPUMP_QUETAB_D
    SYS_EXPORT_FULL_01
    SYS_EXPORT_FULL_02
    Does not look like any non-system user here?
    Message was edited by:
    user508054

  • Cannot shrink the undo tablespace

    Hello!
    I have run a very long procedure, which generated 15GB undo information. Now I can see in the enterprise manager, that the undo tablespace is empty again. I tried to resize the datafile, but I receive "*ORA-03297*: file contains used data beyond requested RESIZE value". How can I shrink the tablespace without dropping and recreating it?
    I tried also
    purge recyclebin;
    I still get ORA-03297 if I try to resize the datafile.
    I wanted to try something like
    ALTER TABLE xxxxx UNALLOCATE UNUSED;
    or
    ALTER TABLE xxxxx SHRINK SPACE;
    but are there any tables that save the undo information?
    Regards.

    Hi
    well, my transaction is ready! The undo tablespace has not more that 10M of information, the other 15G are free!
    Thanks for the answers, it seems that i still have recreate it ...
    Well, another quertion:
    Is it possible, that I just have to wait longer before I resize the undo data file? I have just succeeded in resizing the data file to 7 GB. I really wish I could shrink it to 100M or so, but still - from 15G to 7G is a lot better! 2 hours ago this action was not possible. Is it some automatic management, that needs to time-out before I can shrink the undo tablespace?
    Edited by: user10962462 on Apr 8, 2009 2:39 AM

  • How to move a specific tablespace datafile from one directory to another

    Database: 10.2.0.1
    OS : Generic
    Problem Description : How to move a specific tablespace datafile from one directory to another considering that the database is on Oracle Dataguard setup
    ** Oracle is working on this issue, but in parallel is opening the topic to the Community so that Community members can add their perspective, experience or knowledge. This will further enhance all knowledge bases including My Oracle Support and My Oracle Support Communities **
    Edited by: ram_orcl on 16-Aug-2010 21:21

    Dear ram_orcl,
    Please follow the procedures here;
    http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14239/manage_ps.htm#i1034172
    8.3.4 Renaming a Datafile in the Primary Database
    When you rename one or more datafiles in the primary database, the change is not propagated to the standby database. Therefore, if you want to rename the same datafiles on the standby database, you must manually make the equivalent modifications on the standby database because the modifications are not performed automatically, even if the STANDBY_FILE_MANAGEMENT initialization parameter is set to AUTO.
    The following steps describe how to rename a datafile in the primary database and manually propagate the changes to the standby database.
       1.
          To rename the datafile in the primary database, take the tablespace offline:
          SQL> ALTER TABLESPACE tbs_4 OFFLINE;
       2.
          Exit from the SQL prompt and issue an operating system command, such as the following UNIX mv command, to rename the datafile on the primary system:
          % mv /disk1/oracle/oradata/payroll/tbs_4.dbf
          /disk1/oracle/oradata/payroll/tbs_x.dbf
       3.
          Rename the datafile in the primary database and bring the tablespace back online:
          SQL> ALTER TABLESPACE tbs_4 RENAME DATAFILE      2> '/disk1/oracle/oradata/payroll/tbs_4.dbf'
            3>  TO '/disk1/oracle/oradata/payroll/tbs_x.dbf';
          SQL> ALTER TABLESPACE tbs_4 ONLINE;
       4.
          Connect to the standby database, query the V$ARCHIVED_LOG view to verify all of the archived redo log files are applied, and then stop Redo Apply:
          SQL> SELECT SEQUENCE#,APPLIED FROM V$ARCHIVED_LOG ORDER BY SEQUENCE#;
          SEQUENCE# APP
          8 YES
          9 YES
          10 YES
          11 YES
          4 rows selected.
          SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
       5.
          Shut down the standby database:
          SQL> SHUTDOWN;
       6.
          Rename the datafile at the standby site using an operating system command, such as the UNIX mv command:
          % mv /disk1/oracle/oradata/payroll/tbs_4.dbf /disk1/oracle/oradata/payroll/tbs_x.dbf
       7.
          Start and mount the standby database:
          SQL> STARTUP MOUNT;
       8.
          Rename the datafile in the standby control file. Note that the STANDBY_FILE_MANAGEMENT initialization parameter must be set to MANUAL.
          SQL> ALTER DATABASE RENAME FILE '/disk1/oracle/oradata/payroll/tbs_4.dbf'
            2> TO '/disk1/oracle/oradata/payroll/tbs_x.dbf';
       9.
          On the standby database, restart Redo Apply:
          SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE
            2> DISCONNECT FROM SESSION;
    If you do not rename the corresponding datafile at the standby system, and then try to refresh the standby database control file, the standby database will attempt to use the renamed datafile, but it will not find it. Consequently, you will see error messages similar to the following in the alert log:
    ORA-00283: recovery session canceled due to errors
    ORA-01157: cannot identify/lock datafile 4 - see DBWR trace file
    ORA-01110: datafile 4: '/Disk1/oracle/oradata/payroll/tbs_x.dbf'Hope That Helps.
    Ogan

  • How to get the system time in a Swing application ?

    I know how to do it in JavaScript, but not java. Please help me, and also how to get the system time in an Applet. Thanks !!!

    Check this link, I hope it helps
    http://202.71.136.142:8080/globalleafs/Swing/View.jsp?slno=22&tbl=0

  • How to get the system info in a network

    Hi to all.
    can any one tell me how to get the system related,like system name and logged user ,info in a network using java...
    thnx in advance,
    ashok

    There is quite a bit of data that is stored in the System Properties. Run this little test app and it'll display all of the System Properties, what you are looking for may be contained in there:
    public class Test {
        public static void main(String[] args) {
            System.getProperties().list(System.out);
    }

  • How to retrieve the system used in an iview?

    hello,
    i'm currently having trouble retrieving the proper attribute of an iview to retrieve the system used by it.
    it seem like the strings identifying the system in the iview differ in some iviews.
    using either:
    myIView.getAttribute(IAttriView.PORTAL_SYSTEM)
    or
    myContext.getAttributes("").get("System").get().toString()
    produce errors.
    while get("System") sometimes provides the correct system alias the attribute is none existant for other iviews where the string would be "Systemalias".
    IAttriView.PORTAL_SYSTEM doesn't seem to work at all.
    i did implement fail safe code if the attribute isn't present, however i don't know how to retrieve the system attribute without doing a case switch or something similar for all the different strings, which i would prefer not to do.
    also, is there an easy way to retrieve all iviews which use a specific system without parsing the whole pcd and checking the attributes?

    Prerequisite : Create the System Alias for the systems used in the application.
    Use the below code to retrieve the system details:
            HashMap mapattr = new HashMap();
            HashMap map = new HashMap();
            IUser user = WDClientUser.getCurrentUser().getSAPUser();
            IPrincipal principal = (IPrincipal)user;
            ArrayList list = UMFactory.getSystemLandscapeWrappers();
            ISystemLandscapeWrapper systemLandscape = (ISystemLandscapeWrapper)list.get(0);
            //Portal System ALias name
            ISystemLandscapeObject landScapeObject = systemLandscape.getSystemByAlias("<system alias name>");
            IUserMappingData userMapping = (IUserMappingData) UMFactory.getUserMapping().getUserMappingData(landScapeObject,principal);
            userMapping.enrich(map);
            mappedUserId = map.get("user").toString(); // String "UserId"
            mappedPassword = map.get("mappedpassword").toString(); //String "Password" 
         catch(Exception e)
              e.printStackTrace();
              wdComponentAPI.getMessageManager().reportException("Exception during retrieving the User Details - " + e.getMessage(),true);
    Thanks & Regards,
    Amar Bhagat Challa

  • I just want to know that how to change the font color, font size, and forgr

    i just want to know that how to change the font color, font size, and forground color in JTextPane for the Selected text. i try diffrerent menthod like setFont and setColor, these methods change the fonts of the whole textpane. so please reply me as soon as possible, and thanks in advance.
    Moazzam

    Sell the Old one... Buy a New one...

  • How to Increase the Rows and Columns Size of Bex Query in Enterprise Portal  of SAP  7.3

    Dear All,
    Please let me know the process how to Increase the Rows and Columns  Size of Bex Query in Enterprise Portal  of SAP  7.3 .
    Currently I am getting Only  4 columns and 10 rows in One Page .And I am getting 1,2 etc tabs for both row and column. So i want to increase the column length more than 100  and row length more than 10000.
    Please suggest me a suitable solution to over come this issue.
    Please find the Below screen shot.
    Thanks
    Regards,
    Sai

    Dear All,
    Please find the attached screen shot.
    The report be open with 4 or 5 columns and 5 or 6 rows.
    So, please  let me know how to increase the length of the table.
    Do the needful for me to over come this issue.
    Thanks
    Regards,
    Sai.

  • When plugging in an iPad in Apple Configurator, it is not being read under USB Connected so I can't update it.  Any ideas on how to get the system to read the iPad?

    When plugging in an iPad in Apple Configurator, it is not being read under USB Connected so I can't update it.  The iPhoto window opens up and reads the photos on the iPad, so it is connecting to the computer.  Earlier today I wasn't having any problems.  I have shut down the iPad and the computer and started over, but that didn't help.  Any ideas on how to get the system to read the iPad so I can update the apps on it?

    Hi, is the problem just to update your apps on your iPad? Here is what you should check. Is the iTunes on your computer updated to the latest version? Does your iPad needs to be updated? Do you have enough storage on your iPad to do the update? On your device is your iCloud back up checked?
    Go to Settings - iCloud - Backup/Storage - see if its checked, and try unchecking it before connecting it to the computer.
    Please let me know if you need any further assistance.

  • How to remove the system data details from the overview tab in crmd_order?

    Hi All,
    How to remove the system data details from the overview tab in crmd_order?

    Hi,
    It is a standard functionality. Those information will be very useful when you send a message to SAP.
    If you still want to remove them, raise an OSS message.
    Regards,
    Rajesh Kumar

  • How to find the  System Dbtype in java code

    How to find the System Dbtype in java code
    I need various Db connection my project (oracle, sq l,sybase,db2),So How to find the System Dbtype in java code

    Welcome to the Forums.
    Please go through the FAQ of the Forum.
    You has posted your query in the wrong Forum, this one is dedicated to Oracle Forms.
    Please try {forum:id=1050}.
    Regards,

Maybe you are looking for

  • Reporting-Point Backflushing

    Hi experts, Could anyone please let me know that in case of reporting point backflushing how i can set reporting points What are the diff. reporting point types? What are the mandatory config. settings required for that? thnx in advnce

  • I just purchased a subscription to call the UK and...

    Hi.  I just purchased a subscription to call the UK for $6.99 USD / Mo.  Once my account displayed that the subscription had been delivered I made a call to this number inside the UK, 845XXXXX, which belongs to a large charitable organization.  I am

  • SMTP settings not working on Apple Mail but work on other email clients like Sparrow

    Apple mail constantly gives me "Could not connect to SMTP server" while other email clients have not problem connecting to the same server using the same credentials. And yes I've checked my login name / pw. many times. Same exact settings on all cli

  • Export a Dreamweaver to NETBEANS

    HI There, I have created some JSP programs using dreamweaver, but I don't have idea how can I move them to NETBEANS, Why? becouse I have include some BOTTOM and some frames.... Anybody know how can I export them? Rig

  • Apple Magic Mouse Disconnecting

    My Magic Mouse, that i brought for my Mac Mini, every 30 secs or so it disconnects, then about 1 min later it will reconnect again? that this is ongoing every 30 secs providing that im using it. If i leave it alone it will stay connected no problem,