How to simplify opening/closing Excel to grab data from LabView based software running outside the main VI

Hi,
Right now I have a program written to automate an AOP pilot with a few inputs and outputs (3 valves, ozone generator, UV lamp, TOC meter, ozone meter in liquid and gas phase, and a UV-VIS detector). The valves are controlled with digital outputs, the rest are analog in- an outputs going into a USB-6009. The one exception is the UV-VIS detector (S::CAN Spectro::lyser). We read in about 200 Abs/m values with their corresponding wavelengths. The software of this tool is ran on the same computer and it writes down these values in an Excel file (.fp). My VI needs to select this excel file while running, and grabs the corresponding data from the Excel file. I made a finetuner to select the latest data from the excel file. Now, even though this works, it's not practical for many reasons. It closes all other excel files while running for example, and opens and closes Excel twice in 30 seconds.
I found out the software of the UV-VIS detector is written in LabView too, but the company doesn't seem to care much about sharing the original VI's or making it complementary with other LabView VI's. Now I was wondering if there's an easier solution than opening/closing Excel. Are global variables an option for this problem? I'm far from an expect in LabView, so I just want to know if I should put in the time to learn about global variables or not
Thanks in advance.
Dominic

hello dominic;
I have read your study about AOP recently and I wonder your Labview VI. Can you share the code you used with me?
kind regards,
Dr. Baris OZLUOYMAK
Electrical and Electronics Engineer (MSc)
University of Cukurova, Faculty of Agriculture,
Department of Agricultural Machinery,
01330 Adana / TURKEY
Tel: 90 322 3386408
Fax: 90 322 3387165
E-mail: [email protected]

Similar Messages

My Iphone is deactivate, I have photos with out back up, How can I open with out loosing my data.

My Iphone is deactivate, I have photos with out back up, How can I open with out loosing my data.

Aussienana wrote:
OK, so I went and explored what this site said about Mackeeper. But before I delete it can you tell me:
If we don't need anti virus program and if the one that came with the machine is supposed to do the job then what does that say about the viruses that Mackeeper says it found? Were they not there and the program made them up? Or were they there and Apple didn't deal with them?
Thanks for all feedback.
They were not there and MacKeeper made them up. Delete it completely. I have seen it cripple people's Macs.
Uninstall MacKeeper
Pete

How can i open RAW files in Photoshop CS4 from Canon EOS 6D camera?

How can i open RAW files in Photoshop CS4 from Canon EOS 6D camera?

You can't directly but can use DNG Converter to convert your files so ACR can read and process them.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications

How can i open up my i tunes account from my iphone on my husbands mac as he already has 1 set up?

How can i open up my i tunes account from my i phone on my husbands mac as he alraedy has an i tunes account already set up?

Welcome to the Apple Community.
You'd be best setting up a second user account on the computer and then set up iTunes under your user account with your ID.

How do you open a picture that has had text added using software such as Windows Photo Gallery?

How do you open a picture that has had text added using software such as Windows Photo Gallery?

In Editor, go to File menu>open, and point to where the photo file is on disk.

How can I use Automator to extract specific Data from a text file?

I have several hundred text files that contain a bunch of information. I only need six values from each file and ideally I need them as columns in an excel file.
How can I use Automator to extract specific Data from the text files and either create a new text file or excel file with the info? I have looked all over but can't find a solution. If anyone could please help I would be eternally grateful!!! If there is another, better solution than automator, please let me know!
Example of File Contents:
Link Time =
DD/MMM/YYYY
Random
Text
161 179
bytes of CODE    memory (+                68 range fill )
16 789
bytes of DATA    memory (+    59 absolute )
1 875
bytes of XDATA   memory (+ 1 855 absolute )
90 783
bytes of FARCODE memory
What I would like to have as a final file:
EXCEL COLUMN1
Column 2
Column3
Column4
Column5
Column6
MM/DD/YYYY
filename1
161179
16789
1875
90783
MM/DD/YYYY
filename2
xxxxxx
xxxxx
xxxx
xxxxx
MM/DD/YYYY
filename3
xxxxxx
xxxxx
xxxx
xxxxx
Is this possible? I can't imagine having to go through each and every file one by one. Please help!!!

Hello
You may try the following AppleScript script. It will ask you to choose a root folder where to start searching for *.map files and then create a CSV file named "out.csv" on desktop which you may import to Excel.
set f to (choose folder with prompt "Choose the root folder to start searching")'s POSIX path
if f ends with "/" then set f to f's text 1 thru -2
do shell script "/usr/bin/perl -CSDA -w <<'EOF' - " & f's quoted form & " > ~/Desktop/out.csv
use strict;
use open IN => ':crlf';
chdir $ARGV[0] or die qq($!);
local $/ = qq(\\0);
my @ff = map {chomp; $_} qx(find . -type f -iname '*.map' -print0);
local $/ = qq(\\n);
#     CSV spec
#     - record separator is CRLF
#     - field separator is comma
#     - every field is quoted
#     - text encoding is UTF-8
local $\\ = qq(\\015\\012);    # CRLF
local $, = qq(,);            # COMMA
# print column header row
my @dd = ('column 1', 'column 2', 'column 3', 'column 4', 'column 5', 'column 6');
print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
# print data row per each file
while (@ff) {
    my $f = shift @ff;    # file path
    if ( ! open(IN, '<', $f) ) {
        warn qq(Failed to open $f: $!);
        next;
    $f =~ s%^.*/%%og;    # file name
    @dd = ('', $f, '', '', '', '');
    while (<IN>) {
        chomp;
        $dd[0] = \"$2/$1/$3\" if m%Link Time\\s+=\\s+([0-9]{2})/([0-9]{2})/([0-9]{4})%o;
        ($dd[2] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of CODE\\s/o;
        ($dd[3] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of DATA\\s/o;
        ($dd[4] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of XDATA\\s/o;
        ($dd[5] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of FARCODE\\s/o;
        last unless grep { /^$/ } @dd;
    close IN;
    print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
EOF
Hope this may help,
H

Writing data from labview to excel

Hi, currently I'm trying to get an array of data from labview into a specific excel file everytime.
The attachment i have is a program creating a new worksheet everytime it runs. I couldn't figure out how to make it work. Anyone can help me?
Attachments:
Excel Copy Example.vi ‏19 KB

So what is the specific problem? What is it doing that is incorrect? If the problem is that it is creating a new file every time its because the first subVI is opening a spreadsheet template file. Or at least I think it is since all of the subvis are missing...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Create a macro in Excel to capture Data from MS Project

We have a standard reporting tool which presents data in the format that our Head Office require. I currently copy/paste data from MS Project into the Excel spreadsheet however I would prefer to set up a macro in the Excel work to get the data from
the MS Project file however the macro only seems to pick up from the "paste" command.
Is it possible to set up a macro in Excel to copy data from MS Project?
M.L. Pate

Yes, it is possible through VBA coding. Here is a simple:
http://stackoverflow.com/questions/9347874/how-to-copy-data-from-mpp-file-to-excel-using-macro
If you have programming/Code related questions, please post your question to the forum for Excel developer
http://social.msdn.microsoft.com/Forums/en-US/exceldev
Tony Chen
TechNet Community Support

How can I join 3 tables while extracting data from SAP R/3?

I have 3 tables with the following columns
Emp table (emp)
emp_id
emp_name
emp_add
Dept table (dept)
dept_id
dept_name
dept_loc
Location table (loc)
loc_id
loc_name
Now. If I want to select data from loc_id = 10 and emp_id between 2000 and 3000
How to join these three tables while extracting data from R/3
join condition
loc.loc_id = dept.loc_id
and dept.dept_id = emp.dept_id
and loc.loc_id =10
and emp.emp_id between 2000 and 3000.
Could any one let me know the procedure to extract this data into BW system.

Hi,
shouldn't your join condition be:
loc.loc_id = dept.DEPT_LOC
and dept.dept_id = ??
If you can join the three tables then create a generic datasource (RSO) based on a view (create your view with your join in SE11).
Enable the loc_id and the emp_id as selectable in the datasource so you can then select the values from a BW IPack.
hope this helps...
Olivier.

I used time machine to restore on a formatted MAC. Now the HDD space has reduced by 100GB but I cannot see any of the files. How do I find and delete those 100GB data from the HDD?

I used time machine to restore on a formatted MAC. Now the HDD space has reduced by 100GB but I cannot see any of the files. How do I find and delete those 100GB data from the HDD?

dglenn9000 wrote:
I created a new user account just to see if it was my user Library or if there was something wrong with my system. And the new user account is doing most of the same things so I will need to do a full restore anyway.
Not necessarily. I'd suggest downloading and installing the "combo" update. That's a combination (thus the clever name) of all the updates to Leopard since it was first released, so installing it should fix anything that's gone wrong since then, such as with one of the normal "point" updates. Info and download available at: http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate Be sure to do a +Repair Permissions+ via Disk Utility (in your Applications/Utilities folder) afterwards.

How can I return a big amount of data from a stored procedure?

How can I return a big amount of data from a stored procedure in a efficient way ?
For example not using a cursor for going through all the rows and then assign the values to variables.
thanks in advance!

Let's see if I'm able to explain myself..
I have a SQL query with..about 190.000 (in the best fo the the options)
I have something like this in my stored procedure..
FOR REC IN trn_adj_no
LOOP
REC_PIPE.INSTANCE_ID:=REC.INSTANCE_ID;
REC_PIPE.PROCESS_ID:=REC.PROCESS_ID;
REC_PIPE.ENTITY_TYPE:='TRANSACTION';
REC_PIPE.CRES_FILENAME:=REC.CRES_FILENAME;
REC_PIPE.CHUNK_REVISION_SK:=P_CHUNK_REVISION_SK;
REC_PIPE.CHUNK_ID:=trim(p_chunk_id);
REC_PIPE.FCL_SK:=REC.FCL_SK;
REC_PIPE.FCL_TRADE_SK:=REC.FCL_TRADE_SK;
REC_PIPE.FCL_VALUATION_SK:=REC.FCL_VALUATION_SK;
REC_PIPE.FCL_BUSINESS_GROUP:=REC.FCL_BUSINESS_GROUP;
REC_PIPE.ABS_TRN_CD:=REC.ABS_TRN_CD;
REC_PIPE.ACC_INTEREST_IMP_LOAN_CCY_IFRS:=REC.ACC_INTEREST_IMP_LOAN_CCY_IFRS;
REC_PIPE.ACC_INTEREST_IMP_LOAN_IFRS:=REC.ACC_INTEREST_IMP_LOAN_IFRS;
REC_PIPE.ACCRUED_INT_AMT:=REC.ACCRUED_INT_AMT;
REC_PIPE.ACCRUED_INT_CCY_CD:=REC.ACCRUED_INT_CCY_CD;
REC_PIPE.AMORT_ID:=REC.AMORT_ID;
REC_PIPE.AMORT_IND:=REC.AMORT_IND;
REC_PIPE.ATI:=REC.ATI;
REC_PIPE.ATI_2:=REC.ATI_2;
REC_PIPE.ATI_2_AMT:=REC.ATI_2_AMT;
REC_PIPE.ATI_2_CCY_CD:=REC.ATI_2_CCY_CD;
REC_PIPE.ATI_AMT:=REC.ATI_AMT;
REC_PIPE.ATI_CCY_CD:=REC.ATI_CCY_CD;
REC_PIPE.AVG_MTH_DUE_AMT:=REC.AVG_MTH_DUE_AMT;
REC_PIPE.AVG_MTH_DUE_CCY_CD:=REC.AVG_MTH_DUE_CCY_CD;
REC_PIPE.AVG_YTD_DUE_AMT:=REC.AVG_YTD_DUE_AMT;
REC_PIPE.AVG_YTD_DUE_CCY_CD:=REC.AVG_YTD_DUE_CCY_CD;
REC_PIPE.BAL_SHEET_EXP_AMT:=REC.BAL_SHEET_EXP_AMT;
REC_PIPE.BAL_SHEET_EXP_AMT_IFRS:=REC.BAL_SHEET_EXP_AMT_IFRS;
REC_PIPE.BAL_SHEET_EXP_CCY_CD:=REC.BAL_SHEET_EXP_CCY_CD;
REC_PIPE.BAL_SHEET_EXP_CCY_CD_IFRS:=REC.BAL_SHEET_EXP_CCY_CD_IFRS;
REC_PIPE.BAL_SHEET_EXP_EUR_AMT:=REC.BAL_SHEET_EXP_EUR_AMT;
REC_PIPE.BAL_SHEET_EXP_EUR_AMT_IFRS:=REC.BAL_SHEET_EXP_EUR_AMT_IFRS;
REC_PIPE.BEN_CCDB_ID:=REC.BEN_CCDB_ID;
REC_PIPE.BEN_CD:=REC.BEN_CD;
REC_PIPE.BEN_SRC_CD:=REC.BEN_SRC_CD;
REC_PIPE.BOOK_CD:=REC.BOOK_CD;
REC_PIPE.BOOK_TYPE_CD:=REC.BOOK_TYPE_CD;
REC_PIPE.BOOK_VAL_AMT:=REC.BOOK_VAL_AMT;
REC_PIPE.BOOK_VAL_AMT_IFRS:=REC.BOOK_VAL_AMT_IFRS;
REC_PIPE.BOOK_VAL_CCY_CD:=REC.BOOK_VAL_CCY_CD;
REC_PIPE.BOOK_VAL_CCY_CD_IFRS:=REC.BOOK_VAL_CCY_CD_IFRS;
REC_PIPE.BOOK_VAL_US_GAAP_AMT:=REC.BOOK_VAL_US_GAAP_AMT;
REC_PIPE.BRANCH_ID:=REC.BRANCH_ID;
REC_PIPE.BRANCH_LOC_CD:=REC.BRANCH_LOC_CD;
REC_PIPE.BS_COMPEN_CD:=REC.BS_COMPEN_CD;
REC_PIPE.BUS_AREA_UBR_ID:=REC.BUS_AREA_UBR_ID;
REC_PIPE.CA_CD:=REC.CA_CD;
REC_PIPE.CAD_RISK_WEIGHT_PCT:=REC.CAD_RISK_WEIGHT_PCT;
REC_PIPE.CASH_SETTLE_IND:=REC.CASH_SETTLE_IND;
REC_PIPE.CLS_FLG:=REC.CLS_FLG;
REC_PIPE.COB_DT:=REC.COB_DT;
REC_PIPE.COL_AGMENT_SRC_CD:=REC.COL_AGMENT_SRC_CD;
REC_PIPE.CONSOLIDATION_PCT:=REC.CONSOLIDATION_PCT;
REC_PIPE.CONTRACT_AMT:=REC.CONTRACT_AMT;
REC_PIPE.CONTRACT_COUNT:=REC.CONTRACT_COUNT;
REC_PIPE.COST_UNSEC_WORKOUT_AMT:=REC.COST_UNSEC_WORKOUT_AMT;
REC_PIPE.CPTY_CCDB_ID:=REC.CPTY_CCDB_ID;
REC_PIPE.CPTY_CD:=REC.CPTY_CD;
REC_PIPE.CPTY_LONG_NAME:=REC.CPTY_LONG_NAME;
REC_PIPE.CPTY_SRC_PROXY_UBR_ID:=REC.CPTY_SRC_PROXY_UBR_ID;
REC_PIPE.CPTY_TYPE_CD:=REC.CPTY_TYPE_CD;
REC_PIPE.CPTY_UBR_ID:=REC.CPTY_UBR_ID;
REC_PIPE.CREDIT_LINE_NET_IND:=REC.CREDIT_LINE_NET_IND;
REC_PIPE.CRES_SYS_ID:=REC.CRES_SYS_ID;
REC_PIPE.CTRY_RISK_PROVISION_BAL_AMT:=REC.CTRY_RISK_PROVISION_BAL_AMT;
REC_PIPE.CUR_NOTIONAL_AMT:=REC.CUR_NOTIONAL_AMT;
REC_PIPE.CUR_NOTIONAL_CCY_CD:=REC.CUR_NOTIONAL_CCY_CD;
REC_PIPE.CUR_NOTIONAL_CCY_CD_IFRS:=REC.CUR_NOTIONAL_CCY_CD_IFRS;
REC_PIPE.CUR_NOTIONAL_AMT_IFRS:=REC.CUR_NOTIONAL_AMT_IFRS;
REC_PIPE.DB_ENTITY_TRANSFER_ASSETS_CD:=REC.DB_ENTITY_TRANSFER_ASSETS_CD;
REC_PIPE.DEAL_TYPE_CD:=REC.DEAL_TYPE_CD;
REC_PIPE.DECOMPOSITION_IDENTIFIER:=REC.DECOMPOSITION_IDENTIFIER;
REC_PIPE.DEF_LOAN_FEE_IFRS:=REC.DEF_LOAN_FEE_IFRS;
REC_PIPE.DEF_LOAN_FEE_USGAAP:=REC.DEF_LOAN_FEE_USGAAP;
REC_PIPE.DELIVERY_DT:=REC.DELIVERY_DT;
REC_PIPE.DERIV_NOT_DT:=REC.DERIV_NOT_DT;
REC_PIPE.DERIV_NOT_IND:=REC.DERIV_NOT_IND;
REC_PIPE.DESK:=REC.DESK;
REC_PIPE.DIVISION_UBR_ID:=REC.DIVISION_UBR_ID;
REC_PIPE.ENTITY_CCDB_ID:=REC.ENTITY_CCDB_ID;
REC_PIPE.FAC_CD:=REC.FAC_CD;
REC_PIPE.FAC_LIMIT_CD:=REC.FAC_LIMIT_CD;
REC_PIPE.FAC_LIMIT_SRC_CD:=REC.FAC_LIMIT_SRC_CD;
REC_PIPE.FAC_SRC_CD:=REC.FAC_SRC_CD;
REC_PIPE.FAIR_VAL_CD_IFRS:=REC.FAIR_VAL_CD_IFRS;
REC_PIPE.FED_CLASS_CD:=REC.FED_CLASS_CD;
REC_PIPE.FIRST_RISK_PROVISION_DT:=REC.FIRST_RISK_PROVISION_DT;
REC_PIPE.FV_IMP_LOSS_CRED_CCY_IFRS:=REC.FV_IMP_LOSS_CRED_CCY_IFRS;
REC_PIPE.FV_IMP_LOSS_CRED_IFRS:=REC.FV_IMP_LOSS_CRED_IFRS;
REC_PIPE.FV_IMP_LOSS_CRED_YTD_CCY_IFRS:=REC.FV_IMP_LOSS_CRED_YTD_CCY_IFRS;
REC_PIPE.FV_IMP_LOSS_CRED_YTD_IFRS:=REC.FV_IMP_LOSS_CRED_YTD_IFRS;
REC_PIPE.GEN_RISK_PROVISION_BAL_AMT:=REC.GEN_RISK_PROVISION_BAL_AMT;
REC_PIPE.GL_PROFIT_CENTRE:=REC.GL_PROFIT_CENTRE;
REC_PIPE.GLOBAL_GL_CD:=REC.GLOBAL_GL_CD;
REC_PIPE.IFRS_POSITION:=REC.IFRS_POSITION;
REC_PIPE.IFRS_POSITION_AGGR:=REC.IFRS_POSITION_AGGR;
REC_PIPE.IMP_DT:=REC.IMP_DT;
REC_PIPE.IMP_METHOD_CD:=REC.IMP_METHOD_CD;
REC_PIPE.INT_COMPEN_CD:=REC.INT_COMPEN_CD;
REC_PIPE.INTER_IND:=REC.INTER_IND;
REC_PIPE.INTERCO_IND:=REC.INTERCO_IND;
REC_PIPE.INTERCO_IND_IFRS:=REC.INTERCO_IND_IFRS;
REC_PIPE.LOAN_PUR_FAIR_VAL_ADJ_AMT:=REC.LOAN_PUR_FAIR_VAL_ADJ_AMT;
REC_PIPE.LOCAL_GL_CD:=REC.LOCAL_GL_CD;
REC_PIPE.LOWEST_LEVEL_UBR_ID:=REC.LOWEST_LEVEL_UBR_ID;
REC_PIPE.LTD_FEES_TO_PRINCIPAL_AMT:=REC.LTD_FEES_TO_PRINCIPAL_AMT;
REC_PIPE.MA_CD:=REC.MA_CD;
REC_PIPE.MA_SPL_NOTE:=REC.MA_SPL_NOTE;
REC_PIPE.MA_SRC_CD:=REC.MA_SRC_CD;
REC_PIPE.MA_TYPE_CD:=REC.MA_TYPE_CD;
REC_PIPE.MAN_LINK_ID:=REC.MAN_LINK_ID;
REC_PIPE.MASTER_MA_CD:=REC.MASTER_MA_CD;
REC_PIPE.MATURITY_DT:=REC.MATURITY_DT;
REC_PIPE.MAX_OUT_AMT:=REC.MAX_OUT_AMT;
REC_PIPE.MAX_OUT_CCY_CD:=REC.MAX_OUT_CCY_CD;
REC_PIPE.MTM_AMT:=REC.MTM_AMT;
REC_PIPE.MTM_AMT_IFRS:=REC.MTM_AMT_IFRS;
REC_PIPE.MTM_CCY_CD:=REC.MTM_CCY_CD;
REC_PIPE.MTM_CCY_CD_IFRS:=REC.MTM_CCY_CD_IFRS;
REC_PIPE.NEW_RISK_PROVISION_AMT:=REC.NEW_RISK_PROVISION_AMT;
REC_PIPE.NON_PERF_IND:=REC.NON_PERF_IND;
REC_PIPE.NON_PERF_RCV_INT_AMT:=REC.NON_PERF_RCV_INT_AMT;
REC_PIPE.OPT_TYPE_CD:=REC.OPT_TYPE_CD;
REC_PIPE.ORIG_NOTIONAL_AMT:=REC.ORIG_NOTIONAL_AMT;
REC_PIPE.ORIG_NOTIONAL_CCY_CD:=REC.ORIG_NOTIONAL_CCY_CD;
REC_PIPE.ORIG_TRN_CD:=REC.ORIG_TRN_CD;
REC_PIPE.ORIG_TRN_SRC_CD:=REC.ORIG_TRN_SRC_CD;
REC_PIPE.OTHER_CUR_NOTIONAL_AMT:=REC.OTHER_CUR_NOTIONAL_AMT;
REC_PIPE.OTHER_CUR_NOTIONAL_CCY_CD:=REC.OTHER_CUR_NOTIONAL_CCY_CD;
REC_PIPE.OTHER_ORIG_NOTIONAL_AMT:=REC.OTHER_ORIG_NOTIONAL_AMT;
REC_PIPE.OTHER_ORIG_NOTIONAL_CCY_CD:=REC.OTHER_ORIG_NOTIONAL_CCY_CD;
REC_PIPE.OVERDUE_AMT:=REC.OVERDUE_AMT;
REC_PIPE.OVERDUE_CCY_CD:=REC.OVERDUE_CCY_CD;
REC_PIPE.OVERDUE_DAY_COUNT:=REC.OVERDUE_DAY_COUNT;
REC_PIPE.PAY_CONTRACT_AMT:=REC.PAY_CONTRACT_AMT;
REC_PIPE.PAY_CONTRACT_CCY_CD:=REC.PAY_CONTRACT_CCY_CD;
REC_PIPE.PAY_FWD_AMT:=REC.PAY_FWD_AMT;
REC_PIPE.PAY_FWD_CCY_CD:=REC.PAY_FWD_CCY_CD;
REC_PIPE.PAY_INT_INTERVAL:=REC.PAY_INT_INTERVAL;
REC_PIPE.PAY_INT_RATE:=REC.PAY_INT_RATE;
REC_PIPE.PAY_INT_RATE_TYPE_CD:=REC.PAY_INT_RATE_TYPE_CD;
REC_PIPE.PAY_NEXT_FIX_CPN_DT:=REC.PAY_NEXT_FIX_CPN_DT;
REC_PIPE.PAY_UL_SEC_TYPE_CD:=REC.PAY_UL_SEC_TYPE_CD;
REC_PIPE.PAY_UL_ISS_CCDB_ID:=REC.PAY_UL_ISS_CCDB_ID;
REC_PIPE.PAY_UL_MTM_AMT:=REC.PAY_UL_MTM_AMT;
REC_PIPE.PAY_UL_MTM_CCY_CD:=REC.PAY_UL_MTM_CCY_CD;
REC_PIPE.PAY_UL_SEC_CCY_CD:=REC.PAY_UL_SEC_CCY_CD;
REC_PIPE.PAY_UL_SEC_CD:=REC.PAY_UL_SEC_CD;
REC_PIPE.PCP_TRANSACTION_SK:=REC.PCP_TRANSACTION_SK;
REC_PIPE.PROD_AREA_UBR_ID:=REC.PROD_AREA_UBR_ID;
REC_PIPE.QUOTA_PART_AMT:=REC.QUOTA_PART_AMT;
REC_PIPE.RCV_CONTRACT_AMT:=REC.RCV_CONTRACT_AMT;
REC_PIPE.RCV_CONTRACT_CCY_CD:=REC.RCV_CONTRACT_CCY_CD;
REC_PIPE.RCV_FWD_AMT:=REC.RCV_FWD_AMT;
REC_PIPE.RCV_FWD_CCY_CD:=REC.RCV_FWD_CCY_CD;
REC_PIPE.RCV_INT_RATE:=REC.RCV_INT_RATE;
REC_PIPE.RCV_INT_RATE_TYPE_CD:=REC.RCV_INT_RATE_TYPE_CD;
REC_PIPE.RCV_INT_INTERVAL:=REC.RCV_INT_INTERVAL;
REC_PIPE.RCV_NEXT_FIX_CPN_DT:=REC.RCV_NEXT_FIX_CPN_DT;
REC_PIPE.RCV_UL_ISS_CCDB_ID:=REC.RCV_UL_ISS_CCDB_ID;
REC_PIPE.RCV_UL_MTM_AMT:=REC.RCV_UL_MTM_AMT;
REC_PIPE.RCV_UL_MTM_CCY_CD:=REC.RCV_UL_MTM_CCY_CD;
REC_PIPE.RCV_UL_SEC_CCY_CD:=REC.RCV_UL_SEC_CCY_CD;
REC_PIPE.RCV_UL_SEC_CD:=REC.RCV_UL_SEC_CD;
REC_PIPE.RCV_UL_SEC_TYPE_CD:=REC.RCV_UL_SEC_TYPE_CD;
REC_PIPE.REC_SEC_AMT:=REC.REC_SEC_AMT;
REC_PIPE.REC_SEC_CCY_CD:=REC.REC_SEC_CCY_CD;
REC_PIPE.REC_UNSEC_AMT:=REC.REC_UNSEC_AMT;
REC_PIPE.REC_UNSEC_CCY_CD:=REC.REC_UNSEC_CCY_CD;
REC_PIPE.RECON_CD:=REC.RECON_CD;
REC_PIPE.RECON_SRC_CD:=REC.RECON_SRC_CD;
REC_PIPE.RECOV_AMT:=REC.RECOV_AMT;
REC_PIPE.RECOVERY_FLAG:=REC.RECOVERY_FLAG;
REC_PIPE.REGULATORY_NET_IND:=REC.REGULATORY_NET_IND;
REC_PIPE.REL_RISK_PROVISION_AMT:=REC.REL_RISK_PROVISION_AMT;
REC_PIPE.RESPONSIBLE_BRANCH_CCDB_ID:=REC.RESPONSIBLE_BRANCH_CCDB_ID;
REC_PIPE.RESPONSIBLE_BRANCH_ID:=REC.RESPONSIBLE_BRANCH_ID;
REC_PIPE.RESPONSIBLE_BRANCH_LOC_CD:=REC.RESPONSIBLE_BRANCH_LOC_CD;
REC_PIPE.RESTRUCT_IND:=REC.RESTRUCT_IND;
REC_PIPE.RISK_END_DT:=REC.RISK_END_DT;
REC_PIPE.RISK_ENGINES_METHOD_USED:=REC.RISK_ENGINES_METHOD_USED;
REC_PIPE.RISK_MITIGATING_PCT:=REC.RISK_MITIGATING_PCT;
REC_PIPE.RISK_PROVISION_BAL_AMT:=REC.RISK_PROVISION_BAL_AMT;
REC_PIPE.RISK_PROVISION_CCY_CD:=REC.RISK_PROVISION_CCY_CD;
REC_PIPE.RISK_WRITE_OFF_AMT:=REC.RISK_WRITE_OFF_AMT;
REC_PIPE.RISK_WRITE_OFF_LIFE_DT_AMT:=REC.RISK_WRITE_OFF_LIFE_DT_AMT;
REC_PIPE.RT_BUS_AREA_UBR_ID:=REC.RT_BUS_AREA_UBR_ID;
REC_PIPE.RT_CB_CCDB_ID:=REC.RT_CB_CCDB_ID;
REC_PIPE.RT_COV_CD:=REC.RT_COV_CD;
REC_PIPE.RT_COV_SRC_CD:=REC.RT_COV_SRC_CD;
REC_PIPE.RT_COV_TYPE_CD:=REC.RT_COV_TYPE_CD;
REC_PIPE.RT_COV_TYPE_CD_IFRS:=REC.RT_COV_TYPE_CD_IFRS;
REC_PIPE.RT_TYPE_CD:=REC.RT_TYPE_CD;
REC_PIPE.RT_TYPE_CD_IFRS:=REC.RT_TYPE_CD_IFRS;
REC_PIPE.SENIORITY:=REC.SENIORITY;
REC_PIPE.SETTLE_STATUS_ID:=REC.SETTLE_STATUS_ID;
REC_PIPE.SETTLEMENT_CD:=REC.SETTLEMENT_CD;
REC_PIPE.SETTLEMENT_DT:=REC.SETTLEMENT_DT;
REC_PIPE.SOX_REF:=REC.SOX_REF;
REC_PIPE.SPE_IND:=REC.SPE_IND;
REC_PIPE.SPL_TREAT_IND_IFRS:=REC.SPL_TREAT_IND_IFRS;
REC_PIPE.SRC_PROD_TYPE_CD:=REC.SRC_PROD_TYPE_CD;
REC_PIPE.SRC_PROD_TYPE_CD_IFRS:=REC.SRC_PROD_TYPE_CD_IFRS;
REC_PIPE.SRC_PROXY_UBR_CD:=REC.SRC_PROXY_UBR_CD;
REC_PIPE.START_DT:=REC.START_DT;
REC_PIPE.STRATEGIC_LEND_IND:=REC.STRATEGIC_LEND_IND;
REC_PIPE.STRIKE_FWD_FUT_PRICE_AMT:=REC.STRIKE_FWD_FUT_PRICE_AMT;
REC_PIPE.STRIKE_FWD_FUT_PRICE_CCY_CD:=REC.STRIKE_FWD_FUT_PRICE_CCY_CD;
REC_PIPE.TERMINATION_LOAN_DT:=REC.TERMINATION_LOAN_DT;
REC_PIPE.TRAD_ASSET_CD_IFRS:=REC.TRAD_ASSET_CD_IFRS;
REC_PIPE.TRADE_DT:=REC.TRADE_DT;
REC_PIPE.TRADE_ENTITY_CCDB_ID:=REC.TRADE_ENTITY_CCDB_ID;
REC_PIPE.TRADE_ENTITY_LOC_CD:=REC.TRADE_ENTITY_LOC_CD;
REC_PIPE.TRADE_RELATED_IND:=REC.TRADE_RELATED_IND;
REC_PIPE.TRADE_STATUS:=REC.TRADE_STATUS;
REC_PIPE.TRADING_ENTITY_LOC_CD:=REC.TRADING_ENTITY_LOC_CD;
REC_PIPE.TRAN_MATCH_CD:=REC.TRAN_MATCH_CD;
REC_PIPE.TRN_CD:=REC.TRN_CD;
REC_PIPE.TRN_LINK_CD:=REC.TRN_LINK_CD;
REC_PIPE.TRN_SRC_CD:=REC.TRN_SRC_CD;
REC_PIPE.TRN_TYPE_CD:=REC.TRN_TYPE_CD;
REC_PIPE.TRN_VERSION:=REC.TRN_VERSION;
REC_PIPE.UL_DELIVERY_DT:=REC.UL_DELIVERY_DT;
REC_PIPE.UL_MATURITY_DT:=REC.UL_MATURITY_DT;
REC_PIPE.UNDLY_ISS_NAME:=REC.UNDLY_ISS_NAME;
REC_PIPE.UNEARNED_INCOME_CCY_CD:=REC.UNEARNED_INCOME_CCY_CD;
REC_PIPE.UNEARNED_INCOME_DIS_LOAN_AMT:=REC.UNEARNED_INCOME_DIS_LOAN_AMT;
REC_PIPE.US_GAAP_POSITION_AGGR:=REC.US_GAAP_POSITION_AGGR;
REC_PIPE.VALUATION_DT:=REC.VALUATION_DT;
REC_PIPE.XCHG_CTRY_CD:=REC.XCHG_CTRY_CD;
REC_PIPE.YEAR01_NOTIONAL_AMT:=REC.YEAR01_NOTIONAL_AMT;
REC_PIPE.YEAR02_NOTIONAL_AMT:=REC.YEAR02_NOTIONAL_AMT;
REC_PIPE.YEAR03_NOTIONAL_AMT:=REC.YEAR03_NOTIONAL_AMT;
REC_PIPE.YEAR04_NOTIONAL_AMT:=REC.YEAR04_NOTIONAL_AMT;
REC_PIPE.YEAR05_NOTIONAL_AMT:=REC.YEAR05_NOTIONAL_AMT;
REC_PIPE.YEAR06_NOTIONAL_AMT:=REC.YEAR06_NOTIONAL_AMT;
REC_PIPE.YEAR07_NOTIONAL_AMT:=REC.YEAR07_NOTIONAL_AMT;
REC_PIPE.YEAR08_NOTIONAL_AMT:=REC.YEAR08_NOTIONAL_AMT;
REC_PIPE.YEAR09_NOTIONAL_AMT:=REC.YEAR09_NOTIONAL_AMT;
REC_PIPE.YEAR10_NOTIONAL_AMT:=REC.YEAR10_NOTIONAL_AMT;
REC_PIPE.YTD_PL_TRADE_AMT:=REC.YTD_PL_TRADE_AMT;
REC_PIPE.FCL_VALIDATED_IND:=REC.FCL_VALIDATED_IND;
REC_PIPE.FCL_EXCLUDED_IND:=REC.FCL_EXCLUDED_IND;
REC_PIPE.FCL_SOURCE_SYSTEM:=REC.FCL_SOURCE_SYSTEM;
REC_PIPE.FCL_CREATE_TIMESTAMP:=REC.FCL_CREATE_TIMESTAMP;
REC_PIPE.FCL_UPDATE_TIMESTAMP:=REC.FCL_UPDATE_TIMESTAMP;
REC_PIPE.FCL_TRADE_LOAD_DATE:=REC.FCL_TRADE_LOAD_DATE;
REC_PIPE.FCL_VALUATION_LOAD_DATE:=REC.FCL_VALUATION_LOAD_DATE;
REC_PIPE.FCL_MATRIX_TRADE_TYPE:=REC.FCL_MATRIX_TRADE_TYPE;
REC_PIPE.PCP_GCDS_REVISION:=REC.PCP_GCDS_REVISION;
REC_PIPE.FCL_UTP_BOOK_CD:=REC.FCL_UTP_BOOK_CD;
REC_PIPE.FCL_MIS_RISK_BOOK_CD:=REC.FCL_MIS_RISK_BOOK_CD;
REC_PIPE.ALD_STATUS:=REC.ALD_STATUS;
REC_PIPE.FCAT_OPERATION:=REC.FCAT_OPERATION;
REC_PIPE.INTERNAL_INTRA_IND_IFRS:=REC.INTERNAL_INTRA_IND_IFRS;
REC_PIPE.FCL_USAGE_IND:=REC.FCL_USAGE_IND;
REC_PIPE.QUICK:=REC.QUICK;
REC_PIPE.SEDOL:=REC.SEDOL;
REC_PIPE.CUSIP:=REC.CUSIP;
REC_PIPE.ISIN:=REC.ISIN;
REC_PIPE.QUANTITY:=REC.QUANTITY;
REC_PIPE.RIC:=REC.RIC;
REC_PIPE.DESCRIPTION:=REC.DESCRIPTION;
REC_PIPE.RESET_DATE:=REC.RESET_DATE;
REC_PIPE.PRICE:=REC.PRICE;
REC_PIPE.EXCHANGERATE:=REC.EXCHANGERATE;
REC_PIPE.PARA_PROD_TYPE_ID:=REC.PARA_PROD_TYPE_ID;
REC_PIPE.EFF_INT_RATE:=REC.EFF_INT_RATE;
REC_PIPE.ORIG_FEE_UNREALISED_AMT:=REC.ORIG_FEE_UNREALISED_AMT;
REC_PIPE.ASSET_TYPE:=REC.ASSET_TYPE;
REC_PIPE.IMP_IND_IFRS:=REC.IMP_IND_IFRS;
REC_PIPE.NOT_AMT_REDEMPTION_TO_1YR:=REC.NOT_AMT_REDEMPTION_TO_1YR;
REC_PIPE.NOT_AMT_REDEMPTION_TO_5YR:=REC.NOT_AMT_REDEMPTION_TO_5YR;
REC_PIPE.NOT_AMT_REDEMPTION_OVER_5YR:=REC.NOT_AMT_REDEMPTION_OVER_5YR;
REC_PIPE.CASH_LTD:=REC.CASH_LTD;
REC_PIPE.CASH_LTD_CCY:=REC.CASH_LTD_CCY;
REC_PIPE.FCL_FACILITY_SK:=REC.FCL_FACILITY_SK;
REC_PIPE.DILUTION_RISK_CRITERIA:=REC.DILUTION_RISK_CRITERIA;
REC_PIPE.FCL_RMS_RUNID:=REC.FCL_RMS_RUNID;
REC_PIPE.BSTYPE:=REC.BSTYPE;
REC_PIPE.YTD_ACCR_DIV:=REC.YTD_ACCR_DIV;
REC_PIPE.YTD_DIV:=REC.YTD_DIV;
REC_PIPE.ACC_ADJ_YTD:=REC.ACC_ADJ_YTD;
REC_PIPE.FV_RLZD_PL:=REC.FV_RLZD_PL;
REC_PIPE.ITD_PL:=REC.ITD_PL;
REC_PIPE.YTD_RLZD_PL:=REC.YTD_RLZD_PL;
REC_PIPE.YTD_UNRLZD_PL:=REC.YTD_UNRLZD_PL;
REC_PIPE.TRN_BAS_LGD:=REC.TRN_BAS_LGD;
REC_PIPE.TRAD_YTD_RLZD_PL:=REC.TRAD_YTD_RLZD_PL;
REC_PIPE.TRAD_YTD_UNRLZD_PL:=REC.TRAD_YTD_UNRLZD_PL;
REC_PIPE.UNADJUSTED_PV:=REC.UNADJUSTED_PV;
REC_PIPE.UNADJUSTED_REALISED_PL:=REC.UNADJUSTED_REALISED_PL;
REC_PIPE.UNADJUSTED_UNREALISED_PL:=REC.UNADJUSTED_UNREALISED_PL;
REC_PIPE.GRC_PROD_TYPE_ID:=REC.GRC_PROD_TYPE_ID;
REC_PIPE.GRC_PROD_TYPE_ID_IFRS:=REC.GRC_PROD_TYPE_ID_IFRS;
REC_PIPE.CUR_FEE:=REC.CUR_FEE;
REC_PIPE.SEC_IND:=REC.SEC_IND;
REC_PIPE.INVEST_ASSETS_PORT:=REC.INVEST_ASSETS_PORT;
REC_PIPE.RISK_PROVISION_START_BAL_AMT:=REC.RISK_PROVISION_START_BAL_AMT;
REC_PIPE.GEN_RISK_PRV_START_BAL_AMT:=REC.GEN_RISK_PRV_START_BAL_AMT;
REC_PIPE.GEN_RISK_PROVISION_NEW:=REC.GEN_RISK_PROVISION_NEW;
REC_PIPE.GEN_RISK_PROVISION_REL:=REC.GEN_RISK_PROVISION_REL;
REC_PIPE.ACQUIRED_IND:=REC.ACQUIRED_IND;
REC_PIPE.CRED_NET_MNA:=REC.CRED_NET_MNA;
REC_PIPE.SEC_IFRS_VUE_ADJ:=REC.SEC_IFRS_VUE_ADJ;
REC_PIPE.YEAR00_NOTIONAL_AMT:=REC.YEAR00_NOTIONAL_AMT;
REC_PIPE.MAX_OVERDUE_DAYS:=REC.MAX_OVERDUE_DAYS;
REC_PIPE.MIS_CD:=REC.MIS_CD;
REC_PIPE.MULTINAME_POOL_SK:=REC.MULTINAME_POOL_SK;
REC_PIPE.MULTINAME_CHUNK_REVISION_SK:=REC.MULTINAME_CHUNK_REVISION_SK;
REC_PIPE.MTRX_CALC_CNTRL_EPE:=REC.MTRX_CALC_CNTRL_EPE;
REC_PIPE.MTRX_CALC_CNTRL_PFE:=REC.MTRX_CALC_CNTRL_PFE;
REC_PIPE.FCL_TE_VALIDATED_IND:=REC.FCL_TE_VALIDATED_IND;
REC_PIPE.PCP_TE_DYNAMIC_KEY:=REC.PCP_TE_DYNAMIC_KEY;
REC_PIPE.AVG_COST:=REC.AVG_COST;
REC_PIPE.SEC_LONG_NAME:=REC.SEC_LONG_NAME;
REC_PIPE.ISS_CTRY_CD:=REC.ISS_CTRY_CD;
REC_PIPE.RISK_REPORTING_UBR:=REC.RISK_REPORTING_UBR;
REC_PIPE.RISK_COVERING_BRANCH_CCDB:=REC.RISK_COVERING_BRANCH_CCDB;
REC_PIPE.CLEARING_STATUS:=REC.CLEARING_STATUS;
REC_PIPE.FCL_CPTY_SK:=REC.FCL_CPTY_SK;
REC_PIPE.STRGRP:=REC.STRGRP;
REC_PIPE.OPEN_ENDED_FLAG:=REC.OPEN_ENDED_FLAG;
REC_PIPE.AVAILABILITY_IND:=REC.AVAILABILITY_IND;
REC_PIPE.ESCRW_FLG:=REC.ESCRW_FLG;
REC_PIPE.ESTABLISHED_RELP_FLG:=REC.ESTABLISHED_RELP_FLG;
REC_PIPE.GOV_GTY_AMT:=REC.GOV_GTY_AMT;
REC_PIPE.BUBA_CTRY_ID:=REC.BUBA_CTRY_ID;
REC_PIPE.GOV_GTY_CTRY_CD:=REC.GOV_GTY_CTRY_CD;
REC_PIPE.INTERNET_DPST_FLG:=REC.INTERNET_DPST_FLG;
REC_PIPE.LAST_ACTIVITY_DT:=REC.LAST_ACTIVITY_DT;
REC_PIPE.NOTICE_PERIOD_QTY:=REC.NOTICE_PERIOD_QTY;
REC_PIPE.OPR_RELP_FLG:=REC.OPR_RELP_FLG;
REC_PIPE.SIG_WD_PENALTY_FLG:=REC.SIG_WD_PENALTY_FLG;
REC_PIPE.TRN_ACT_FLG:=REC.TRN_ACT_FLG;
PIPE ROW(REC_PIPE);
END LOOP;
the Stored procedre returns REC_PIPE.
I thins this could be not efficient enough...
What do you think?

How do I select a black and white sketch from a white background and keep the filled in area of the sketch? I want to copy it to a colored background. I amusing elements 12.

How do I select a black and white sketch from a white background and keep the filled in area of the sketch? I want to copy it to a colored background. I am using elements 12.

oesrowstreasurer
Please clarify your "Elements 12". Is that as in Photoshop Elements 12 (photo editor) or Premiere Elements 12 (video editor). And, on what computer operating system is the program running?
Your question is pointing to Photoshop Elements 12 and that you have posted in the wrong forum. If this is a Photoshop Elements 12 question as I believe it is, please post your thread in the Adobe Premiere Elements Forum using the following link provided for your convenience
https://forums.adobe.com/community/photoshop_elements
The alternative is to wait for a moderator to see your thread here and move it from here to the Adobe Photoshop Elements Forum..
We will be watching for a confirmation on what program you are using.
ATR

How to refresh AdvancedDataGrid in flashbuilder 4, getting data from webservice

I have tried many things like below to get my grid updated when it gets data from webservice ,
myGridName.ValidateNow(),
myGridName.InvalidateList(),
if(myGridName.updateCompletePendingFlag)
the problem is I have two buttons that can show hourly, and daily data in one grid, when activating daily button, I got the data in the grid but with delay of maybe 2 to 5 seconds(to get data from webservice) and within this period if user clicks on hourly button, to see the hourly data, then user will see the daily data attached to the end of the hourly data in the grid, please notice that there is just one grid. the problem is I don't know how much to wait for the first set of data to show up on the grid (daily data) and then enable all other buttons so user can only just choose Hour button when all the daily data has been shown in the grid, so when user click on hour button, the daily data will not attached to the end of hourly data in the grid.
any help is appreciated

Thanks for the answer,
I do disable other controls when one of the buttons are clicked and waiting for the data, and in my retrieved data function from webserver , at the very end after I retrievd all the data from webserver and add it to the dataprovider of the grid, I enable all the controls, but the problem is in reality , I see that all other controls are enabled sooner than I see the data show on the grid, and because of that user can think there is no data in the grid and click on the hour buttons , causing that the daily data to be attached to the hourly data in one grid.
I appreicate if you could still help me

How do I access on my MacBook Pro data from my iMac stored on Lacie external hard drive.

i am attempting to use my MacBook Pro with the files and data from my iMac which is in the shop. On my iMac I backup regularly with Time Machine to my LaCie external hard drive. When I open my Lacie to my laptop the only data I see is from the laptop--I can't find the iMac data. I tried getting in via Time Machine--same problem. I tried searching through Finder--same problem. I tried logging into my laptop as the other user--same problem. both macs have latest operating system. Both are seriously souped up with plenty of storage and memory.

Connect the LaCie HDD to the MBP. Click on the icon. Is there a folder with the title Backups.backupdb? That is where the Time machine data is stored.
Ciao.

I had an Ipad 1. I just bought an Ipad3. How do I transfer all my apps and data from my Ipad1 ti Ipad 3?

I had an Ipad 1. I just bought an Ipad3. How do I transfer all my apps and data from my Ipad1 to Ipad 3?

See Here > http://support.apple.com/kb/HT2109

How to simplify opening/closing Excel to grab data from LabView based software running outside the main VI

Similar Messages

Maybe you are looking for