How to simulate user response in Objective C

How can a program simulate a user response such as picking a menu choice?
For example, in a game design where the player takes turns with the device, the player shuffles the cards and gets various animations dependent upon the choice from a shuffle menu. Now it is the computer's turn to shuffle (make menu selections). The program can decide which buttons to press, but how can I make the program PRESS the buttons?
iOS 5.1 etc.
I think I am simply looking for a hook in the run-loop at user response time that checks to see if there is a program response available, that interpretes the request or tickles the first responder, or the responder chain. I have trouble believing that this has not come up already, Maybe it is just the way I am looking at the problem. Thank you in advance.

Use "performClick"

Similar Messages

  • How to modify user responsibility

    Hi,
    Please suggest me how to modify the user responsibility in oracle apps 11i.
    I have a user, he has system Administration role, however he wants System Administrator. Let me know how to change it.
    Thanks,
    -vinod

    Please suggest me how to modify the user responsibility in oracle apps 11i.
    I have a user, he has system Administration role, however he wants System Administrator. Let me know how to change it.You can assign responsibilities from (System Administrator responsibility > Security > User > Define). If you want to end-date the other responsibility/role then you can do from the same screen or from User Management responsibility.
    Thanks
    Hussein

  • How to simulate users workload in CIC0 with CATT

    Hello,
    I would like to generate workload of CRM users with CATT. Users will work only with transaction CIC0. A typical session contain:
    - search Businness Partner according partner id,
    - double click on Operation
    - click on tab "Fact Sheet"
    I detect, that CATT unable to double click on "Operation" sub-window. The same problem is in tab "Fact Sheet" overview. I think, that CATT is not possible to do this!
       Please, could you tell me ... is CIC0 and CATT good idea how to generate user workload?
       Best regards ...
       Martin Hucl, Logica.

    I don't use the Quest tools, so this is a guess based on the less-than-helpful documentation:
    Get-Content .\userList.txt | ForEach {
    Get-QADUser -ObjectAttributes @{EmployeeID=$_} -IncludedProperties EmployeeID
    } | Select EmployeeID,DisplayName,SamAccountName
    Don't retire TechNet! -
    (Don't give up yet - 12,700+ strong and growing)

  • User Response variable

    Hi,
    Could some one help me on how to put user response promt to my report title from input control report use a variable.
    much appreciate your help.
    Regard,
    Lily

    Hi,
    As per the formula, you are putting a space " " between two values.
    =ReportFilter(Param1]) + " " + ReportFilter(Param2) + " " + ReportFilter(Param3)
    To bring one line in each value you need to replace the space " " in the above formula with Char(13)+Char(10) that means a Carriage Return and Line Feed.
    The formula would look like
    =ReportFilter(Param1]) + Char(13)+Char(10) + ReportFilter(Param2) + Char(13)+Char(10) + ReportFilter(Param3)
    You can also write it as
    =Replace(ReportFilter(Param1]) + " " + ReportFilter(Param2) + " " + ReportFilter(Param3);" ";Char(13)+Char(10))
    But there is one problem, if one the values you selected has 2 words with a space in between, it'll show that value in 2 lines as the space would be replaced by Char(13)+Char(10).
    Ex:
    Chicago New York Miami
    would look like
    Chicago
    New
    York
    Miami
    Hope that helps
    To get rid of this problem what you can do is change the first formula that you created, replace the space " " by a semicolon ";" if you want
    =ReportFilter(Param1]) + ";" + ReportFilter(Param2) + ";" + ReportFilter(Param3)
    What say you?

  • How to set user preferred timezone in OBIEE for all objects.

    How to set user preferred timezone in OBIEE for all objects based on users TZ(may be from @{session.timeZone}). without changing My Account -> Preferences

    Check
    Time Zone Specification from http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535403
    just in case https://blogs.oracle.com/xmlpublisher/entry/how_to_keep_your_dates_from_go

  • How to alter user defined  objects in  oracle

    Hi all,
    Can any one tell me how to alter user defined objects in oracle .
    Thanks,
    P Prakash

    prakash wrote:
    Hi all,
    Can any one tell me how to alter user defined objects in oracle .
    DROP
    then
    CREATE
    Handle:      prakash
    Email:      [email protected]
    Status Level:      Newbie (80)
    Registered:      Feb 3, 2011
    Total Posts:      185
    Total Questions:      67 (65 unresolved)
    so many questions & so few answers.
    How SAD!
    Edited by: sb92075 on Sep 22, 2011 9:22 AM

  • How to find out responsibility attached for particular user through query

    hi
    How to find out responsibility attached for particular user through query
    Regards
    9841672839

    Hi,
    Following sql will help you find the responsibilities associated with the users in oracle applications.
    SELECT frt.RESPONSIBILITY_NAME, furg.end_date
    FROM
    fnd_user_resp_groups furg,
    FND_RESPONSIBILITY fr,
    fnd_responsibility_tl frt,
    fnd_user fu
    WHERE fu.user_name = ‘&&username’
    AND fu.user_id = furg.user_id
    AND furg.responsibility_id = fr.RESPONSIBILITY_ID
    AND frt.responsibility_id = fr.RESPONSIBILITY_ID
    ORDER BY 1
    Cheers...

  • How to let user download multi files at the same time in WebDynpro ABAP?

    hi all:
    As you know, WeyDynpor has provided upload/download UI element, but it seems that it only support one file upload/downlaod at the same time.The following is the API method to download one file in Webdynpro:
        cl_wd_runtime_services=>attach_file_to_response(
         EXPORTING
           i_filename      = lv_filename
           i_content       = lv_content
           i_mime_type     = lv_mine_type
           i_in_new_window = abap_true
           i_inplace       = abap_false
    *      EXCEPTIONS
    *        others          = 1
    but if when use click one button, we want to provide user a html file plus 2 icons files which are used as this html file's resource file, then how to let user download these 3 files together at the same time?
    one simple way is calling the download api (cl_wd_runtime_services=>attach_file_to_response) 3 times,
    but it is very ugly that three popup windows are shown to let user select every file's download path, which is unaccepted.
    So anyone know more convienient way to handle it?
    thanks.

    Hi,
    I suggest you to zip the files and attach it to the response. Do the add file part for each of your files
         "References
         DATA lr_zip TYPE REF TO cl_abap_zip.
         "Variables
         DATA lv_zip_xstring TYPE xstring.
         DATA lv_zip_name TYPE string.
         DATA lv_file_content TYPE xstring.
         DATA lv_file_name  TYPE string.
         "Create instance
         CREATE OBJECT lr_zip.
         "Add file
         lr_zip_attachments->add(
           EXPORTING name = lv_file_name
                  content = lv_file_content ).
         lr_zip_attachments->save( RECEIVING zip = lv_zip_xstring ).
         "Attach zip file to response
         cl_wd_runtime_services=>attach_file_to_response(
           EXPORTING i_filename      = lv_zip_name
                     i_mime_type     = 'ZIP/APPLICATION'
                     i_content       = lv_zip_xstring ).

  • How to handle user preference which has "_" and " " in the name

    Hi Experts,
    I have a question how to handle value which has like "_" and "space" etc in user preference.
    If setting "a_b-c d", I could not retrieve this because it's escaped in database.
    So this code can't get value even though I can set it.
    Is there any restriction of name? Is there any documentation how to code user prefernece which has non alphabet and number in the name?
    I know it's possible to handle the data like adding escaped data. But I don't think this is the best way to retrieve the data. Because nobody confirm it's not problem in the future.
    Could you tell me the best way to get these user preference?
    Thanks in advance,
    Masaaki Tada
    Here is a sample.
    <%@ page contentType="text/html;charset=Shift_JIS" %><%@ page language="java" import="com.plumtree.remote.portlet.*, com.plumtree.remote.prc.*, java.util.*" %>
    <%
    /** * UserInfo - Simple Page * Display User Information*/
    // VariablesIPortletContext oPortletContext = null;IPortletRequest oPortletRequest = null;IPortletUser oPortletUser = null;IPortletResponse oPortletResponse = null;IRemoteSession s;IUserManager oUser;
    /* Get Portlet Objects */
    try{oPortletContext = PortletContextFactory.createPortletContext(request, response);oPortletRequest = oPortletContext.getRequest();oPortletUser = oPortletContext.getUser();oPortletResponse = oPortletContext.getResponse();} catch (Exception e) {oPortletContext = null;oPortletRequest = null;oPortletUser = null;oPortletResponse = null;}
    String val = oPortletRequest.getSettingValue( SettingType.User, "a_b-c d" );String hoe = oPortletRequest.getSettingValue( SettingType.User, "abcd" );out.println( "a_b-c d: " + val );out.println( "abcd : " + hoe );
    oPortletResponse.setSettingValue( SettingType.User, "a_b-c d", "aiueo" );oPortletResponse.setSettingValue( SettingType.User, "abcd", "bbbb" );%>

    Plumtree recommends that user preference names have only alphanumeric characters in them (a-z, A-Z, 0-9). Any non-alphanumeric characters will be encoded by the EDK.
    I strongly suggest that you change your user pref name to something that's alphanumeric. However, if that is not possible, you can use the following workaround: in the web service editor, enter the encoded name for the user pref. There are several ways to get the encoded name.
    One way is to encode the pref manually, yourself. Plumtree uses the %u encoded format: each non alphanumeric character is converted into %uxxxx, where xxxx is the Unicode representation of the character. For all ASCII characters, just look at the ASCII hex chart. For example, character "-" has a hex value of 2d. So, a preference name "jane_pref" would be encoded to "jane%u002dpref", and you'd enter the latter value on the preferences page in the web service editor.
    The other way to find out the encoded value is to set a preference programmatically and use the HTTP tunnel tool to look at HTTP traffic between the portal server and remote server. The remote server will be sending a HTTP header to the portal server (the header name will probably be CSP-User-Pref) and inside the header you should see the pref name, encoded with %u. Just copy it out of there and into the web service editor.
    Hope this helps,
    Jane

  • Transport user error: invalid object name while starting CMS in CCM

    Hi Experts,
            I'm not able to start the CMS in CCM.It was working fine. Suddenly it went down due to some data base access failure. After that Iu2019m not able to start the CMS.
    Kindly find the event viewer error and information.
    Error: The root server reported an error Initialization Failure.
    Error: Failed to register object..   Reason: Transport user error: invalid object name..
    Information: Central Management Server stopped
          Could you please tell me how to start the CMS in CCM? Since I can able to setup CMS Database and audit database successfully.
    Regards,
    Sridharan

    Hi ,
            Thanks for the response.I have trace the CMS.I found some error in log file.any idea on the following errors,
    trace message: CNSClientManager::VerifyConnection() : search fails(37) - Transport user error: object with the specified name not found.
    trace message: CNSClientManager::VerifyConnection() : Failed to query for APSs.  Empty cluster list returned.
    trace message: TheAPSServer::RegisterApsInNameServer: Fail to register the current APS(Transport user error: invalid object name.)
    trace message: CNSClientManager::ClusterInfo::InvalidateAPS: Removing APS  from m_ActiveMembers and adding to m_InactiveMembers
    trace message: SIServerController:run: Fail to initialize or uninitialize.  Reason is The root server reported an error Initialization Failure.:
    Regards,
    Sridharan

  • How to keep an application level object running with SunIDM?

    We are working on intergrate a gmail project with SunIDM. We need an application level object running with SunIDM so it will maintain a token generated from Gmail side. In anther servlet project, I had this object saved in the attribute of the ServletContext, then other session level servlet could share this attribute anytime. Is there a way to store attribute in Servlet Context and have it shared by different user session in SunIDM? I have been reading documents and searched this forum, haven't find any topics related how to maintain an application level object live. Hopefully that I can get some hint here.
    Thank you so much.

    Paul, Thank you so much for the further explaination. I don't think it will work since the token generated from gmail will expire every 24 hours.
    We are using the gdata library published from by gmail people, and I create a new UserService object and have it run in the application level. The UserService object will generate a token and renew it every 24 hours behind the scene. Here is how I implement it in my Servlet project:
    //to have a UserService object running at the application level:
    public class GmailUserService extends HttpServlet {
    public void init(ServletConfig config) throws ServletException{
    super.init();
    userService = new UserService(myApplication);
    config.getServletContext().setAttribute("gmailUserService", userService);
    //to access this UserService object from other servlet in each user session:
    UserService userService = (UserService)servletContext.getAttribute("gmailUserService");
    Gmail will trigger an error if we create a new UserService object for each user. They recommend to have all the user to share one UserService object. I am looking for similar approach in SunIDM.
    Thank you again, Paul, for trying to help.

  • How to reference the Parent view Object attribute in Child View object

    Hi , I have the requirememt to generate Tree like struture to display Salary from joining date to retirement date in yearly form.I have writtent two Pl/SQL function to return parent node and child nodes(based on selected year).
    1.First function --> Input paramter (employee id, retirement date , joining date) --> return parent node row with start_date and end_date
    2. 2nd function --> input paarmter(employee id, startDate, end_date) --> return child node based on selected parent node i.e. start date and end date
    I have created two ADF view object based on two function return
    Parent Node --> select * from Table( EUPS.FN_GET_CONTR_SAL_BY_YR(employeeId,retirement Date, dateOf joining)) ;
    Child Node --> select * FROM TABLE( EUPS.FN_GET_CONTR_SAL_FOR_YEAR( employeId,startDate, endDate) ) based on selected parent node.
    I am giving binding variable as input for 2nd function (child node) . I don't know how to reference the binding variable value in child view from parent view.
    Like I have to refernce employeId,startDate, endDate values in 2nd function from parent view object. some thing like parentNode.selectedStart_date parentNode.employeeId.
    I know we can achive this writing the code in backing bean.But i want to know how can we refernce parent view object attribute values in child view object using Groovy or otherway?
    I will appreciate your help.
    Thanks

    I have two view com.ContractualSalaryByYearlyView for Parent Node and com.ContractualSalaryByYearlyView for child Node.
    I have created view link(ContractualSalYearlyByYearViewLink) betweem two view by giving common field empId, stDate , endDate.(below is the view link xml file).
    I tried give the binding attribute values using parent object reference like below in com.ContractualSalaryByYearlyView xml file but getting error
    Variable ContractualSalaryByYearlyView not recognized.I think i am using groovy expression.
    Thanks for quick response.
    com.ContractualSalaryByYearlyView xml
    <ViewObject
    <DesignTime>
    <Attr Name="_isExpertMode" Value="true"/>
    </DesignTime>
    <Variable
    Name="empId"
    Kind="where"
    Type="java.lang.Integer">
    <TransientExpression><![CDATA[adf.object.ContractualSalaryByYearlyView.EmpId]]></TransientExpression>
    </Variable>
    ContractualSalYearlyByYearViewLink.xml file
    <ViewLinkDefEnd
    Name="ContractualSalaryByYearlyView"
    Cardinality="1"
    Owner="com.ContractualSalaryByYearlyView"
    Source="true">
    <DesignTime>
    <Attr Name="_finderName" Value="ContractualSalaryByYearlyView"/>
    <Attr Name="_isUpdateable" Value="true"/>
    </DesignTime>
    <AttrArray Name="Attributes">
    <Item
    Value="com.ContractualSalaryByYearlyView.EmpId"/>
    <Item
    Value="com.ContractualSalaryByYearlyView.StDate"/>
    <Item
    Value="com.ContractualSalaryByYearlyView.EndDate"/>
    </AttrArray>
    </ViewLinkDefEnd>
    <ViewLinkDefEnd
    Name="ContractualSalaryForYearView"
    Cardinality="-1"
    Owner="com.ContractualSalaryForYearView">
    <DesignTime>
    <Attr Name="_finderName" Value="ContractualSalaryForYearView"/>
    <Attr Name="_isUpdateable" Value="true"/>
    </DesignTime>
    <AttrArray Name="Attributes">
    <Item
    Value="com.ContractualSalaryForYearView.EmpId"/>
    <Item
    Value="com.ContractualSalaryForYearView.StDate"/>
    <Item
    Value="com.ContractualSalaryForYearView.EndDate"/>
    </AttrArray>
    </ViewLinkDefEnd>

  • How do I set up the "Objects and Attachments"

    Hi .... I'm new at WorkFlow (and SAP for that matter) and have inherited a WF that is already built.  In several of the steps I can see "Objects and Attachments" on the work item screen where a User can click to be directed to a transaction. For example, on one screen the User can click on "Incoming Invoice: 5105601690" to be directed to the Invoice Display Screen that is populated with information for that particular invoice (5105601690).
    I am looking at the WF using TCode SWDD and cannot figure our how the original developer set this up.  So my question is ..... for a particular WF step, how do you set up the "Objects and Attachments: area so that the User will be directed to a particular transaction when he/she clicks on it.
    Thanks in advance, and sorry for such a "juvenile" question.
    Dan A

    Thanks for your reply Rajkumar,
    I am looking at the screen you have directed me to.  Business object is BUS2081 (actually it is ZMMWBS2081 which is a customized version BUS2081) Method is "Display" and Attribute is "InvoiceDocNumber".  How do I know by looking at this that "Display" means Display Invoice?  What if I wanted to display the PO instead?
    Thanks for the "spoon feeding".
    Dan A

  • How to use user id of the logged user (in Application) in the Valueset

    Hi All,
    I want to Create a Table Value Set.
    i want to Filter the values in value set based on the User id by which user has logged in Application.
    How to get user id and how it can be used in Table Value set Query.
    Please guide me...
    Waiting 4 ur response.
    Thanks
    Sheetal

    Hi Sheetal,
    You can call the function fnd_global.user_id to get the current user identifier of the logged in user.
    Regards,
    J.
    SELECT fnd_global.user_id
    FROM   dual

  • How to change Font Size of Object Explorer in "SQL Server Management Studio"

    Dear Team,
    "SQL Server Management Studio" is a fantastic IDE for the database.
    There are so many customization options available but one thing many users missing is that " How to change Font Size of Object Explorer?"
    Can you please accumulate this feature in IDE ASAP?
    Many Thanks,
    Bhavesh

    Its there
    Go to Tools -> Options
    Then under Environment you've fonts and colors tab where you can specify a higher font size.
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

Maybe you are looking for