How to size down on an html button

the button properties are controlled by the css file or something else, I'm trying to see if the button can be shrunk from what dreamweaver displays it as default sizes. that goes for any button.

CSS:
button {
    font-size:small;
    padding: 12px;
    margin: 24px;
HTML:
<button>My Beautiful Button</button>
Example:
My Beautiful Button
Nancy O.

Similar Messages

How to Suppress HTML Button on WCC Check-in Page

Hi,
On the WCC checkin page there is an HTML button. When I attempt to add an asset to DAM, and click the HTML button before initial check-in I get this error
Unable to execute service DC_CACHE_CHECKIN_NEW and function checkDocRules.
The error was caused by an internally generated issue. The error has been logged.
Is there a way to suppress the HTML button? I really have no use for it. Or is this a settings error on me WCC server?
Thank you,
Randy

It's not the function isn't developed. It's just that every object on the front panel has a corresponding object on the block diagram. Attached is an example of how to do it with two buttons.
By the way, if you've run out of room on your panel, it probably means your interface is too crowded. If that is so, I suggest you add more pages to the tab to make your interface more clear.
Try to take over the world!
Attachments:
stop.vi ‏19 KB

How is it possible to insert the .html button into the header?

Hello everybody!
My site is [link removed - promotion is not permitted here] But I have one more site as well. I'm a newbie still in this matter and learn everything by myself, so, I need some help, guys. I would like to create the same header like in my site and insert the html button in the picture. Should I use Photoshop for this purpose or another tools? And it would be nice also to make links in the infographics as well. How should I be?
Thanks. Appreciate your help

Just use JavaScript!
http://www.crowderassoc.com/javascript/backbutton.html

How do I down size my photos on the ipad before sending by email?

When I send pictures via email from my 3rd generation ipad they are "oversized" or too large.
How do I down size before sending?

In Safari, (the web browser), there are specific arrows to go back and forward through website pages.
In other Apps, it will depend on how the App is built.
As to Yahoo Mai it depends on where you are viewing the email. If you are using the Mail App, then you don't log out. The Mail accounts in the Mail App are always there.
If you are using the Yahoo App, You can Tap on the folder at the top, then on your account/name, and then on Sign Out.

How can i enable the html:text box when clicking the html:button

Hi,
i have a text box which is disabled defaultly and i want to enable it when i click on submit button.
<html:button property="new" value="new">
<html:text property="name" disabled="true"/>
how i will enable that text filed? please tell me?
Thanks,
swarupa

try using javascript onclick attribute:
onclick="document.form.name.disabled=false"
m

How can I create a navigation bar in the template so I can change the down state of a button on a page made from the template in DW3?

We're creating pages from a template in DW3. The template includes a header, footer and a navigation bar. We've made the navigation bar an editable region so that we can change the down state of the buttons on pages where it is required. However, when we make a new page from the template and try to change the behaviors of the buttons in the navigation bar it will not allow us to make those changes.

Have you considered using CSS styled text/list menus instead of image rollovers. It isn't hard really and it's actually a much better choice for web accessibility and for search engines to find and follow your links. Here are some links to several CSS menu systems you can try:
CSS Express Drop-Down Menus (tutorial)
http://www.projectseven.com/tutorials/navigation/auto_hide/
CSS Tab Designer creates 60+ CSS Styled Button and Tab Menus (download)
http://www.highdots.com/css-tab-designer/
List-O-Rama (DW Extension)
http://www.dmxzone.com/go?5618
CSS Menu Maker (On-Line Menu Generator)
http://www.cssmenumaker.com/
Pop-Menu Magic2 by PVII (DW extension purchase)
http://www.projectseven.com/products/menusystems/pmm2/index.htm
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

I have an ipad mini and it wont turn on i tryed holding the home button down and the sleep button every one has said that and nothing is working how can i fix it

i need help with my ipad mini it wont turn on i have helled the home button down and the sleep button together and nothing is happening

What happens if you plug it in to charge?

I am getting a message in the middle of my imac screen instructing me to hold down the on-off button and turn off the machine. The message is in several foreign languages beside english, and there is not way to get rid of it. The curser is inactive.

I am getting a message in the middle of my imac screen instructing me to hold down the on-off button and turn off the computer. The message is in several languages and completely takes over the computer disabling the mouse and all other functions. The only option is to unplug the computer or turn it off. I'm concerned that this is a virus. It does not look like it's related to Apple or the imac OS.

That sounds like a kernel panic. These are generally hardware related, often caused by poorly seated or fauly RAM.
What is a Kernel Panic?
http://support.apple.com/kb/TS3742
and http://support.apple.com/kb/TS1892?viewlocale=en_US
http://developer.apple.com/mac/library/technotes/tn2002/tn2063.html
More details here:
http://www.thexlab.com/faqs/kernelpanics.html
Useful articles on how to avoid and eliminate kernel panics here:
http://reviews.cnet.com/8301-13727_7-10344626-263.html?tag=mfiredir
http://www.macworld.com/article/2027201/how-to-troubleshoot-a-kernel-panic.html# tk.nl_mwhelp

Jquery + json generate html buttons with condition

Hi all,
My need is to generate buttons with conditions described in json. Help me please, I’m newbie.
Here is my json code (it is valid, but does not work with html code below) :
    "Caption": "Module caption",
    "IconsDirectory": "C://Images/",
    "Buttons": [
            "Conditions": [
                    "ConditionText": "1 == 1",
                    "ButtonText": "Text1",
                    "Visible": true,
                    "Colors": {
                        "FontColor": "#FFFFFF",
                        "BGColor": "#00FF00"
                    "Size": {
                        "Width": 200,
                        "Height": 50
                    "Icon": {
                        "FileName": "Smile.png",
                        "Width": 16,
                        "Height": 16
                    "Url": {
                        "UrlAddress": "http://www.google.com",
                        "OpenNewWindow": true
                    "JavaScriptAction": {
                        "Text": "alert('ok');"
                    "ConditionText": "2 == 2",
                    "ButtonText": "Text2",
                    "Visible": true,
                    "Colors": {
                        "FontColor": "#FFFFFF",
                        "BGColor": "#00FF00"
                    "Size": {
                        "Width": 200,
                        "Height": 50
                    "Icon": {
                        "FileName": "Smile.png",
                        "Width": 16,
                        "Height": 16
                    "Url": {
                        "UrlAddress": "http://www.google.com",
                        "OpenNewWindow": true
                    "JavaScriptAction": {
                        "Text": "alert('ok');"
html code:
<html>
<head>
<title>SMButtons</title>
[removed][removed]
[removed]
//When document loaded.
$(document).ready(function(){
// Get data from file as JSON
            $.getJSON('weekendtask.json', function(data) {
        var buttons = data.Buttons;
           $.each(buttons, function(key, val)
                    $('<li><input type="button" value="'+ val.ButtonText +'"/></li>').appendTo('#ulObj');
   [removed]
</head>
<body>
<br>
<br>
<div>
<ul id='ulObj'>
<li>1</li>
<li>2</li>
<li>3</li>
</ul>
</div>
</body>
</html>
Also I would like to show here my working code (generating html buttons from json without condition).
json code (it works) :
    "Caption": "Module caption",
    "IconsDirectory": "C://Images/",
    "Buttons": [
            "TText": "google",
            "JavaScriptAction": "alert('google')"
            "TText": "microsoft",
            "JavaScriptAction": "alert('microsoft')"
            "TText": "yahoo",
            "JavaScriptAction": "alert('yahoo')"
html code (it works) :
<html>
<head>
<title>SMButtons</title>
<script src="jquery/jquery-1.4.2.js"></script>
<script type="text/javascript">
//When document loaded.
$(document).ready(function(){
// Get data from file as JSON
            $.getJSON('Module.json', function(data) {
            // Set json data from file to variable 'persons'
    var buttons = data.Buttons;
    var icondir = data.IconsDirectory;
    // For each item of variable person append to ul list
           $.each(buttons, function(key, val)
                    //$("<li><input type='button' onClick='"+ val.Url +"' value='"+ val.Text +"'/></li>").appendTo('#aaa');
//$("<li><input type='button' style='"+ val.Style +"' onClick='"+ val.Url +"' value='"+ val.Text +"'/></li>").appendTo('#aaa');
//$("<li><input type='button' value='"+ val.TText +"'/></li>").appendTo('#bbb');
                    //style="height: 25px; width: 100px"
                    //$('<li><input type="button" onClick="'+ val.action +'" value="'+ val.Text +'"/></li>').appendTo('#aaa');
                    $('<li><input type="button" onClick="'+ val.JavaScriptAction +'" value="'+ val.TText +'"/></li>').appendTo('#ulObj');
    //var knop = data.Knop;
    // For each item of variable person append to ul list
           //$.each(buttons, function(key, val)
                    //$("<li><input type='button' onClick='"+ val.Url +"' value='"+ val.Text +"'/></li>").appendTo('#aaa');
//$("<li><input type='button' style='"+ val.Style +"' onClick='"+ val.Url +"' value='"+ val.Text +"'/></li>").appendTo('#bbb');
                    //style="height: 25px; width: 100px"
                    //$('<li><input type="button" onClick="'+ val.action +'" value="'+ val.Text +'"/></li>').appendTo('#aaa');
                    //$('<li><input type="button" onClick="'+ val.action +'" value="'+ val.Text +'"/></li>').appendTo('#aaa');
   </script>
</head>
<body>
<br>
<br>
<div>
<ul id='ulObj'>
<li>1</li>
</ul>
</div>
<br>
<div>
<ul id='aaa'>

</ul>
</div>


<div>
<ul id='bbb'>


</ul>
</div>
</body>
</html>

What you are saying makes great sense. It's just the mechanics behind what you've said that I'm unclear about.
<p>
Are you saying to create another button within the same region with the same attributes/position, so they overlay each other? Then set the conditions on both buttons?
<p>
If I understand the above correctly, then how do I set the conditions? I guess I'm asking where do I place the SQL statement and how does the results relate to the button conditions?
<p>
Thanks for the help,
David

Can I specify font size=1 when printing HTML?

I want print my HTML report in font size = 1. I don't know how to do it?
When using report builder, there seems no special control for printing HTML?
Hope experts here broaden my mind
Richard

This is possible
1) In Builder paper layout select the object for which you want to change the font size
2) In menu
Format --> Font
You can change the font and its size
Then generate to html/htmlcss . I have verified this
Thanks
The Oracle Reports Team

Wife's Mac Book Pro locked up will not allow her to log on, it froze up on her so she did a hard shut down by holding power button until it shut down. Will power up but not allow her to log in on the log in screen. Any suggestions?

Wife's Mac Book Pro locked up. She shut it down by holding power button unitl it shut down, when she powers it up now it will not allow her to log in on the log in screen. Any suggestions?

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Adding a javascript or HTML button to a custom List page

Hi everyone,
I am using SharePoint 2013 (Office 365 hosted) and have come across a feature I want to implement, but have no idea how.
I want to add a button, that when click, would take the user to a certain URL. I want to add the button to the bottom of my List page, after the last record. Attached is a picture for example:
As shown, I want to add a button where it says "insert button here". Now I have messed a little with SharePoint Designer 2013 and when I go to "List and Libraries", I click on my particular List. It then opens the following page, where
I can open a particular .aspx file, which in turn I can edit. I assume I want to open up Allitems.aspx
The code for the AllItems.aspx is below. I assume I have to add the button somewhere. Please help!
<%@ Page language="C#" MasterPageFile="~masterurl/default.master" Inherits="Microsoft.SharePoint.WebPartPages.WebPartPage,Microsoft.SharePoint,Version=16.0.0.0,Culture=neutral,PublicKeyToken=71e9bce111e9429c" meta:progid="SharePoint.WebPartPage.Document" meta:webpartpageexpansion="full" %>
<%@ Register Tagprefix="SharePoint" Namespace="Microsoft.SharePoint.WebControls" Assembly="Microsoft.SharePoint, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %> <%@ Register Tagprefix="Utilities" Namespace="Microsoft.SharePoint.Utilities" Assembly="Microsoft.SharePoint, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %> <%@ Import Namespace="Microsoft.SharePoint" %> <%@ Assembly Name="Microsoft.Web.CommandUI, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %> <%@ Register Tagprefix="WebPartPages" Namespace="Microsoft.SharePoint.WebPartPages" Assembly="Microsoft.SharePoint, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Register Tagprefix="ApplicationPages" Namespace="Microsoft.SharePoint.ApplicationPages.WebControls" Assembly="Microsoft.SharePoint, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<asp:Content ContentPlaceHolderId="PlaceHolderPageTitle" runat="server">
<SharePoint:ListProperty Property="TitleOrFolder" runat="server"/> -
<SharePoint:ListProperty Property="CurrentViewTitle" runat="server"/></asp:Content>
<asp:content contentplaceholderid="PlaceHolderAdditionalPageHead" runat="server">
<SharePoint:RssLink runat="server"/>
</asp:content>
<asp:Content ContentPlaceHolderId="PlaceHolderPageImage" runat="server">
<SharePoint:ViewIcon Width="145" Height="54" runat="server"/></asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderLeftActions" runat="server">
<SharePoint:RecentChangesMenu runat="server" id="RecentChanges"/>
<SharePoint:ModifySettingsLink runat="server"/>
</asp:Content>
<asp:Content ContentPlaceHolderId ="PlaceHolderBodyLeftBorder" runat="server">
<div height="100%" class="ms-pagemargin"><img src="/_layouts/15/images/blank.gif?rev=35" width='6' height='1' alt="" data-accessibility-nocheck="true"/></div>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderMain" runat="server">
<WebPartPages:WebPartZone runat="server" FrameType="None" ID="Main" Title="loc:Main"><ZoneTemplate>
<WebPartPages:XsltListViewWebPart runat="server" ViewFlag="" ViewSelectorFetchAsync="False" InplaceSearchEnabled="True" ServerRender="False" ClientRender="True" InitialAsyncDataFetch="False" WebId="00000000-0000-0000-0000-000000000000" IsClientRender="False" GhostedXslLink="main.xsl" NoDefaultStyle="" ViewGuid="{54E1FA61-FF1F-4DFB-AC73-19BB62886F54}" EnableOriginalValue="False" DisplayName="All Items" ViewContentTypeId="" Default="TRUE" ListUrl="" ListDisplayName="" ListName="{C9D8E425-1521-4EFE-8A59-4EE9FE481482}" ListId="c9d8e425-1521-4efe-8a59-4ee9fe481482" PageType="PAGE_DEFAULTVIEW" PageSize="-1" UseSQLDataSourcePaging="True" DataSourceID="" ShowWithSampleData="False" AsyncRefresh="False" ManualRefresh="False" AutoRefresh="False" AutoRefreshInterval="60" Title="TestTestListB" FrameType="Default" SuppressWebPartChrome="False" Description="" IsIncluded="True" ZoneID="Main" PartOrder="2" FrameState="Normal" AllowRemove="True" AllowZoneChange="True" AllowMinimize="True" AllowConnect="True" AllowEdit="True" AllowHide="True" IsVisible="True" TitleUrl="/Lists/TestTestListB" DetailLink="/Lists/TestTestListB" HelpLink="" HelpMode="Modeless" Dir="Default" PartImageSmall="" MissingAssembly="Cannot import this Web Part." PartImageLarge="" IsIncludedFilter="" ExportControlledProperties="False" ConnectionID="00000000-0000-0000-0000-000000000000" ID="g_54e1fa61_ff1f_4dfb_ac73_19bb62886f54" ExportMode="NonSensitiveData" __MarkupType="vsattributemarkup" __WebPartId="{54E1FA61-FF1F-4DFB-AC73-19BB62886F54}" __AllowXSLTEditing="true" __designer:CustomXsl="Fldtypes_mswhTitle.xsl;fldtypes_Ratings.xsl" WebPart="true" Height="" Width=""><ParameterBindings>
<ParameterBinding Name="dvt_sortdir" Location="Postback;Connection"/>
<ParameterBinding Name="dvt_sortfield" Location="Postback;Connection"/>
<ParameterBinding Name="dvt_startposition" Location="Postback" DefaultValue=""/>
<ParameterBinding Name="dvt_firstrow" Location="Postback;Connection"/>
<ParameterBinding Name="OpenMenuKeyAccessible" Location="Resource(wss,OpenMenuKeyAccessible)" />
<ParameterBinding Name="open_menu" Location="Resource(wss,open_menu)" />
<ParameterBinding Name="select_deselect_all" Location="Resource(wss,select_deselect_all)" />
<ParameterBinding Name="idPresEnabled" Location="Resource(wss,idPresEnabled)" /><ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" /><ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_DEFAULT)" /></ParameterBindings>
<DataFields>
</DataFields>
<XmlDefinition>
<View Name="{54E1FA61-FF1F-4DFB-AC73-19BB62886F54}" DefaultView="TRUE" MobileView="TRUE" MobileDefaultView="TRUE" Type="HTML" DisplayName="All Items" Url="/Lists/TestTestListB/AllItems.aspx" Level="1" BaseViewID="1" ContentTypeID="0x" ImageUrl="/_layouts/15/images/generic.png?rev=35" ><Query><OrderBy><FieldRef Name="ID"/></OrderBy></Query><ViewFields><FieldRef Name="LinkTitle"/><FieldRef Name="CheckFlag"/><FieldRef Name="vamd"/><FieldRef Name="ID"/><FieldRef Name="lnhz"/><FieldRef Name="_x0032_222"/><FieldRef Name="Hyperlink"/><FieldRef Name="Hyperlink2"/><FieldRef Name="CreateWorkflowHyperlink"/><FieldRef Name="reusable"/><FieldRef Name="reusable2"/><FieldRef Name="_x0072_u4"/><FieldRef Name="_x0072_u5"/><FieldRef Name="_x0072_u6"/></ViewFields><RowLimit Paged="TRUE">30</RowLimit><Aggregations Value="Off"/><JSLink>clienttemplates.js</JSLink><XslLink Default="TRUE">main.xsl</XslLink><Toolbar Type="Standard"/></View></XmlDefinition>
</WebPartPages:XsltListViewWebPart>
</ZoneTemplate></WebPartPages:WebPartZone>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderPageDescription" runat="server">
<SharePoint:ListProperty CssClass="ms-listdescription" Property="Description" runat="server"/>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderCalendarNavigator" runat="server">
<SharePoint:SPCalendarNavigator id="CalendarNavigatorId" runat="server"/>
<ApplicationPages:CalendarAggregationPanel id="AggregationPanel" runat="server"/>
</asp:Content>

Hi,
Beside the modification of list view, I would like to recommend to add a Content Editor Web Part (CEWP) at the bottom of the page. To do that:
1. Add Content Editor Web Part (CEWP) and change the zone index to 2.
2. Insert Embed Code to Content Editor Web Part (CEWP). A hyper-link <a> element would look like:
<a href="http://www.microsoft.com/">Insert hyper-link here</a>
Miles LI TechNet Community Support

HTML Button use an image instead of Text

I have an HTML button in its own region called A_BUTTON, its current Button display attributes are
sytle: HTML Button
Attributes: name="A" class="where_clause_button"
what it does is i use a dynamic action based off the where_clause_button jquery selector and use javascript to update a hidden field. I would now like to use the Oracle Logo for example as the image of the button instead of using a text label for it. I tried adding to the Attributes src="http://www.oracleimg.com/admin/images/ocom/hp/oralogo_small.gif". When i run it the button still works the same as before but without the image and retains its Text Label, in this case its A.
the html it generates is for the button during runtime is:
<input type="button" src="http://www.oracleimg.com/admin/images/ocom/hp/oralogo_small.gif" class="where_clause_button" name="A" onclick="apex.submit('');" id="A_BUTTON" value="A">
How do i retain the functionality of this button but make it an image button?
Edited by: Brobot on Feb 9, 2011 5:22 PM

<li>Use a template based button and customize the template with the image.
<li>Add appropriate JS code to the URL section(prefixing with "javascript:" ) and optionally add a some ID attribute for easy JS access.

How do I create an Lightroom HTML Gallery and preserve the - in the file name?

How do I create an Lightroom HTML Gallery and preserve the - in the file name?
The hyphen (-) is more search engine friendly, so I label all my photos using hyphens (-) to separate the keywords in the file name
Here's a sample file name - it's for the "Guess Where Berkeley" flickr site
guess-where-berkeley-serkes-xx-s-curve.jpg
I created a Lightroom HTML Gallery and posted it to the following link.
http://www.berkeleyhomes.com/tests/lightroom/lightroom-test-1/
Though it looksl like the HML gallery shows the original file name in the web page, it looks like Adobe Lightroom modified each photo's file name by changing the - (hyphen) to an underscore (_)
Originally
guess-where-berkeley-serkes-xx-s-curve.jpg
After Adobe created the HTML photo gallery the name became
guess_where_berkeley_serkes_xx_s_curve.jpg
Is there any way to preserve the – rather than the _ character
Thank you!
Ira Serkes

InDesign's interactive PDF support is a small subset of what you can do in Acrobat Profesional.
I think you probably want to create a button (or change an existing button) in Acrobat Pro that causes Acrobat to close the document -- that should be analagous to "exitting the CD." I assume your autorun file is opening the PDF in Adobe Reader? You have not included it and are not specific, so it is tough to say.
I believe in Acrobat Javascript you can close the document with this.closeDoc(). You'll probaly need to ask on the Acrobat forums (possiby Acrobat Scripting) for more detail.

How do I turn off the Power button Lockout on my HPw1858 monitor?

How do I turn off the Power button lockout on my HPw1858 monitor?
This question was solved.
View Solution.

Hi,
Power Button Lockout is displayed.
The monitor's Power Button Lockout function is enabled.
Press and hold the Power button for 10 seconds to unlock the Power button function.
If the above doesn't work then try a monitor reset. Unplug the monitor’s power cord and hold down the monitor’s power button for 30-60 seconds. Plug the monitor back in and power it up.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

How to size down on an html button

Similar Messages

Maybe you are looking for