How to skip Pay Value in formula defined in Element Entry Form

Dear,
We are on 11.5.10 version, right now there is and element allowance which amount is defined in Pay value for each employee under the element entry and no formula attached for this element. However, we have an other element monthdays - absentdays in that month, suppose as mentioned example, As per new policy system should calculate pay value would be
((monthdays -absentdays * (Pay value / monthdays) )
Allowance           = 30000
Absentdays           = 2
Monthdays           = 30
Result would be = (30-2) * (30000/30) = 28000
We will create formula once i come to know the way through which can get pay values and use it in formula.
--thanks                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

Thanks for reply,
But we want user to enter pay-value under the element window and to be overwrited it on the bases of payroll formula condition,
Could you please advice, is there any possibility having pay-value.
--thanks                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

Similar Messages

  • Unable to find the column pay value and monthly salary in element entries

    hi,
    iam unable to find the payvalue and monthly salary in element entries form.
    people enter and maintain> assignment > entries >entry values..
    please tell me the table and column where the payvalue and monthlly salary is going to get populate.
    Thanks,
    vijetha.c

    It seems that you're using an application to connect to an Oracle database. It's general Oracle Database Forum, so you should put your question under correct topic
    Kamran Agayev A. (10g OCP)
    http://kamranagayev.wordpress.com
    [Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

  • Value Set Error in Further Element Entry DFF

    Hi
    We have defined a value set(attached to Further Element Entry DFF) to fetch person contact details.
    Value Set definition
    ====================
    SELECT papf1.full_name, pcr.contact_person_id
    FROM
    per_contact_relationships pcr,per_all_people_f papf,per_all_people_f papf1,fnd_sessions fs,hr_lookups hl
    WHERE pcr.person_id = papf.person_id
    AND pcr.contact_person_id = papf1.person_id
    AND pcr.contact_type = hl.lookup_code(+)
    AND hl.lookup_type(+) = 'XXWHO_CONTACT'
    AND ((pcr.contact_type = 'XXWHO_FAM'
    AND pcr.cont_attribute1 = 'Child')
    OR (pcr.contact_type = 'XXWHO_FAM_CHILD'))
    AND papf.person_id = :$PROFILES$.PER_PERSON_ID
    AND FS.SESSION_ID=USERENV('SESSIONID')
    AND fs.effective_date between pcr.date_start AND NVL(pcr.date_end,'31-DEC-4712')
    AND fs.effective_date BETWEEN papf.effective_start_date AND papf.effective_end_date
    AND fs.effective_date BETWEEN papf1.effective_start_date AND papf1.effective_end_date;
    We have used :$PROFILES$.PER_PERSON_ID to filter only the contact records specific to the person to whom the element entry would be attached.
    Issue here is when we are trying to attach the element entry from People Enter and Maintain form, we are able to see the list of values.
    Where as when we are trying to attach the entry from fast path -> Entries, no value is retrived. And client is using the fast fath "Entries" to
    attach the entries for restricting the access from the users.
    Any input/pointer in this regard?

    Tried this but it is giving the below error
    APP-FND-01242: Cannot read value from field PER_ASSIGNMENT_ID
    Cause: The field PER_ASSIGNMENT_ID could not be located or read.
    Action: This error is normally the result of an incorrectly-entered field name string in a trigger, or a field name string that does not uniquely specify a field in your form. Correct your trigger logic to precisely specify a valid field.

  • Webdynpro : How to SKIP the values of the Model Node.

    Hi
    i imported a WSDL into my WDJ application.
    where on context mapping, i mapped the MODEL with my CONTROLLER.
    I would like to SKIP couple of Attributes and Model node
    In WEBSERVICE navigator, i have the check box as SKIP, so using that i can skip in Navigator ,
    But how to do the same in WEBDYNPRO Coding.
    Say for Example
    Context
    ----------ModelNode1
    ----------ModelNode2
    ----------ModelNode3
    ----------======ModelAttribute1      NULL
    ----------======ModelAttribute2      SKIP
    ----------======ModelAttribute3      SKIP
    i know how to set the value if it need to set it to null
    wdcontext.nodelModelNode3.currentModelNode3element.setModelAttribute1("null")
    similaraly  can anyone tell me how to set the SKIP for other 2 attributes......
    Thanks

    Hi Chintan
    Thanks for your response....
    fine ... i understood your solution....
    but , my problem goes and makes me dizzzy
    i have 10 mandatory filed in my Webservice..
    i passed all the 10 mandatoy fileds and get perfect Response In WEBSERVICE Navigator....
    i tried passing the same value via WDJ application as show below
    since i have a node element with cardinalith 0..n
    I set the value those i passed in Webservice Navigator.....
    wdContext.nodeRequest_getSubmitRequest().
                     nodeRequestDetails().nodeRoles().invalidate();
           IPrivateOne_AppView.IRolesElement RoleE = wdContext.createRolesElement(new ComplexType_RoleData());
         RoleE.setRoleId("BASIC");
         RoleE.setSysId("R3");
         wdContext.nodeRequest_getSubmitRequest().
                   nodeRequestDetails().nodeRoles().addElement(RoleE);
    But Here ,I get a Error Message Saying  :Error in Submiting Request :  No role seleced for the request.
    so , i even checked whether the node is populated with rite value by printing them after executing the WSDL.
         wdContext.currentRequest_getSubmitRequestElement().modelObject().execute();
              MsgManger.reportSuccess( "After Push_execute_WSDL");
    MsgManger.reportSuccess( " COntroller getRoleId -- "+wdContext.nodeRequest_getSubmitRequest()
                        .nodeRequestDetails().nodeRoles().currentRolesElement().getRoleId().toString());
              MsgManger.reportSuccess( " COntroller getSysId -- "+wdContext.nodeRequest_getSubmitRequest()
                        .nodeRequestDetails().nodeRoles().currentRolesElement().getSysId().toString());
    Output
    After Push_execute_WSDL
    COntroller getRoleId -- BASIC
    COntroller getSysId -- R3
    Kindly let me know wat could be wrong........
    The MOST wired thing is
    if i didnt set and Role , SysId in webservice navigator , then Error thrown at Webservice Navigator is
    Error in Submiting Request : RoleId is mandatory,SysId is mandatory null
    on following same thing , if i didnt set Role and SysID in WebDynpro then, i get error as
    Error in Submiting Request :  No role seleced for the request.
    How is this possible....
    any help on this would be appreciated...
    Thanks

  • How to create a report to pick up missing element entry data

    we are trying to build a report which should show that if the countries are not entering the element entries correctly .e.g bonus element entry etc.how can we accomplish this and what is best way to do it.How can we find out if an employee is eligible for certain elements.

    Ramesh,
    The elements have already been defined but some users in some countries are not entering the element values for example bonus elements .So we need to create a report to find out which countries are not entering the elements and on which employees .So if you have any suggestion or any code i would really appreciate it.

  • How to sum the values based on the for all entries

    for example :
    select aufnr vornr sum (ISM02) sum ( ISM04) Sum (ism05) from afru into table I_afru for all entries of I_caufv where aufnr = i_caufv-aufnr group by aufnr.
    can any one help based on this query
    without forall entries it is working based for all entries only i want the solution Help me please.
    Regards
    Augustine

    Simple,
    select aufnr vornr ISM02 ISM04 ism05 from afru into table
    I_afru for all entries of I_caufv
    where aufnr = i_caufv-aufnr .
    <b>if sy-subrc eq 0.
    sort I_afru by aufnr.
    loop at l_afru.
    at end of aufnr.
    SUM.
    l_afru_temp = l_afru.
    append l_afru_temp.
    endat.
    endloop.
    endif.</b>

  • How to set variable value in an XML array

    Hi,
    Please let me know how to set the value for a xml array element using assign activity inside a for-each block in BPEL 11g
    I tried to set the variable value for result element using the below condition but i encountered selection failure message
    $outputVariable.payload/ns1:Student['i']/ns1:result or
    $outputVariable.payload/ns1:Student[$i]/ns1:result
    And the xsd used is as below
    <xsd:complexType name="StudentCollection">
    <xsd:sequence>
    <xsd:element name="Student" type="Student" minOccurs="0" maxOccurs="unbounded"/>
    </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="Student">
    <xsd:sequence>
    <xsd:element name="Name" type="xsd:string"/>
    <xsd:element name="location" type="xsd:string"/>
    <xsd:element name="mark" type="xsd:string"/>
    <xsd:element name="result" type="xsd:string"/>
    </xsd:sequence>
    </xsd:complexType>
    Thanks,
    Dhana

    Hi,
    At the back of button specify the following parameter:-
    CMD    1        Execute_planning_function
    Planning_function_name  1   xyz
    Var_name     1    variable_name
    var_value      1    blank
    Can also refer to link below:-
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0a89464-f697-2910-2ba6-9877e3088954?quicklink=index&overridelayout=true(can refer to page 20)
    http://www.sdn.sap.com/ddc5564a-337d-4cf9-a34e-2dab64df09be/finaldownload/downloadid-a61a6724ba8e7b7fbd9c5df9590ab50d/ddc5564a-337d-4cf9-a34e-2dab64df09be/irj/scn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be?quicklink=index&overridelayout=true
    Hope it may help

  • Element Entry Screen does not show value

    I have created an element xxtest123, created a fast formula, and the formula result contain the direct result to this element.
    But before creating fast formula I did following steps.
    Created Input Values
    The input values this element has are
    Pay Value, Hire Date and Date Of Birth all are non enterable by user, and Database Items boxes corresponding to these values are checked.
    Created Element Link
    I, later linked it to a payroll and checked box Standard on the element link screen.
    Now issue is after running Payroll I can see the SOE report and Run Result Screen shows the expected result
    But the element entry screen does not show the values. Rather the fields are simply blank.
    Can anyone please help me why it is behaving such a way?

    Thanx Sharath for your quick response.
    But I have run QuickPay for that employee.
    After running QuickPay the input values names are coming into element entry value screen.
    But it is not showing the value corresponding to the element input value names.
    Thanks,
    Pankaj Kedia

  • How to get minimal value from children with skip missing values?

    Hi,I would like to get minimum value from children, but I would like to skip missing.Minimal value from children works fine (see following formula):@MIN(@CHILDREN("member_name"));Minimal value with skip missing (see following formula) returns error:@MINSRANGE(SKIPMISSING,@CHILDREN("member_name"));Error message: "This function must be a macro".Question: How can I write a formule to get minimal value from children without missing values.What is a macro and how can I write it? If possible I would like to write formule instread of macro!Thanks,Grofaty

    Hi,I have found out solution:@MINS(SKIPMISSING,@CHILDREN "member_name")); No more help is needed.Thanks,Grofaty

  • How to get the value of a variable defined in javascript in JSP

    how to get the value of a variable defined in javascript in/through JSP????

    In Javascript you can use the DOM to access the input element and set it's value before submitting the form. Then it's value will just be passed.

  • How to set a new value for formula field in crystal reports xi?

    <p>How to set a new value for formula field in crystal reports xi?</p><p>//formula</p><p>{@description}</p><p> </p><p>exemplo in VB6</p><p>crxSubreport.FormulaFields.Item(1).Text =  "&#39;Subreport Formula&#39;"  or</p><p>crxSubreport.FormulaFields.Item("description").Text =  "&#39;Subreport Formula&#39;"</p><p>How to in JRC?</p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p>

    Hi,
    This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
    Regards,
    <p>Blair Wheadon</p>
    <p>Product Manager, Crystal Reports</p>

  • How to use cumulative Value in a formula

    Hello Gurus,
    I would like to use the cumulative value in a query as part of a formula calculation. I have created a KF which is assigned a constant value 1. When displaying the KF I am cumulating it so for each row I am getting 1,2,3,4...etc. How can I use this cumulated value in a formula calculation?
    For example, in a column cumulative count is 1,2,3,4...etc .My requirement is ,i want to identify the record with number 36 , to do this i have created a formula with boolean Equal to function comparing with the required number, but the boolean result what am i getting is Zero instead of one(1).
    The reason i found behind the problem is, the cumulative count that we see is dynamically happening during the run time for display ,but the internal value is 1 only.
    Is there any other way to meet this requirement or am i missing anypoint?.
    Thanks.

    Dear Yaseen,
                To get the value in formula cumulative,after you have created the formula for that particular key figure,go to edit and click on tab "calculations".
    In that select overall result as 'count all values not equal to zero' and single result as 'count all values not equal to zero' .
    And mark the cumulative check box underneath.
    I hope you get the desired result and please do me favour .
    Sumit goomber

  • In flex, How to set a value to one parameter, the parameter defined in a cffunction in a cfc file

    In flex, How to set a value to one parameter, the parameter
    defined in a cffunction in a cfc file, In the cffunction there are
    much cfargument, I want set a value to one of them, such as the
    cfc:
    <cffunction access="remote" name="myShow" output="false"
    returntype="struct">
    <cfargument name="ID" type="numeric" default=0>
    <cfargument name="GoodsID" type="string" default="">
    <cfargument name="DestTime" type="string" default="">
    <cfargument name="DestCount" type="numeric" default=1>
    How I set a value to only parameter one of them , such as set
    GoodsID when use mx:remoteObject.
    Thanks for your help

    Got maybe a solution for you, I have just tested it.
    So, the idea is to use intermediate variables. Imagine Var1 and Var2 variables that you refresh with your more or less complicated queries. Then what you can do is to refresh your final variable Var3 with a query using your intermediate variables. Here is an example for Oracle:
    select #Var1+#Var2 from dual
    This way you can make a chain of dependent variables: Var3 is using Var2 and Var2 is using Var1.
    Hope it helps.
    Shamil

  • BEX formula.. How to know the row value in formulas dynamically

    Hi all,
    I just need to clarify a doubt..
    Requirement:
    COL1      -               COL2
    Y1            -               X
    Y2            -               X + 12
    Y3            -               X + 12 + 12
    YN           -               X + 12 + 12 + u2026 12(n)
    Y is dynamic from the source datau2026.. Itu2019s the year (2009,2008u2026 etc..)
    X value is from the user (i/p variable value). Some dummy valueu2026
    Now, the main logic I want to incorporate is like using a formula for COL2
    COL2 Formula looks like thisu2026.          X + (12 * N)             where N= 0 for the 1st row; 1 for the 2nd row; 2 for the 3rd row like thatu2026..
    How to dynamically allocate value for N based on the row count?
    Pls. let me know if you find somethingu2026.
    Thanks.
    Edited by: Arun Bala G on May 21, 2010 10:59 AM

    how abt this:
    This approach only valid for Workbboks..
    create COLUMN3 just type like this
    0
    12
    24
    and drag this upto end of Col1 and Col2 so it will poulate multiples of 12 then in Column 4 apply the C1-C2+C3..
    hope it helps
    Sorry Bhaskar,
    Hardcoding the formula is not relevant at all. May be you had not read this query properly. Its no way related to being dynamic right... If it was Excel workbook, anyone would have used a simple formula & moved values like cakewalk.
    So unfortunate! BEx has some limitations..
    All I need in my query is some counter like 1,2,3.... till the end of the last record. That's all.
    Pl. find the sample data
    COL1     COL2          
    2009     1.3          
    2008     13.3          Which is 1.3+12
    2007     25.3          Which is 1.3+12+12
    2006     37.3          Which is 1.3+12+12+12
    Do let me know if you have any clues?
    Thanks!
    Edited by: Arun Bala G on May 21, 2010 11:20 AM

  • How to set values of formula fields during runtime in crystal reports

    Hello All,
    Could any one help in letting me know how to set the values of a formula in the runtime.
    I tried using the below systax in the formula field
    Assume that I have 2 formula fields
    1. format_count
    2. format_display
    my formula is like below:
    in the formula field format_count i have
    format_display=pagenumber
    when checking for errors its throwing error stating "stamement is expected"
    Could any one help in resolving this
    Thanks

    Hi Ranjeet,
    Whenever you assign values to a variable, you need to use :=
    Like this:
    numbervar x := pagenumber
    And what exactly are you trying to do anyway?
    -Abhilash

Maybe you are looking for