How to solve Excepted declaration Specifier or '...' before CFXMLTreeRef

Hi
I implementing webservice in my application. I created stubs using WSMakeStub command and i include those stub (4 files) in my application. After that if i compile my application i got 8 errors. All errors are "Excepted declaration Specifier or '...' before CFXMLTreeRef".
I included CoreServices.framework and CoreFoundation.framework in my application. Those framework path as follows
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.1. 3.sdk/System/Library/Frameworks/CoreFoundation.framework
Still i am getting this error.
Any body have idea about this issue?
Thanks
mindus

If you don't mind, would you do that for me please?

Similar Messages

Hello Simple problem - don,t know how to solve it. With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was de

Hello
Simple problem - don,t know how to solve it.
With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was defective and went to get a new Magic Mouse after lots of frustration. Today, I have an edit to do it it does the SAME thing !!
I was like ????#$%?&*(???
Opened all the lights and taught I've trow the new mouse to the garbage and was using the defective mouse again... no !! - ??
Actually, the bran new mouse is doing the same thing. What I understand after investigating on the motion and watching carefully my fingers !! - is that when I click I have to keep my finger at the EXACT same place on the mouse... drag and release and it's fine. If I click by pushing on the mouse and my finder is moving of a 1/32th of a millimeter, it will release and my selection will be to redo. You can understand my frustration ! - 75$ later... same problem, but I know that if I click with about 5 pounds of pressure and trying to pass my finger through the plastic of the mouse, it you stay steady and make it !
The problem is that scrolling is enable while clicking and it bugs.
How to disable it ??
Simple question - can't find the answer !

Helllooo !?
sorry but the Magic Mouse is just useless with the new Adobe Premiere CC and since I'm not the only one but can't find answer this is really disappointing. This mouse is just fantastic and now I have to swap from a USB mouse to the Magic Mouse every times I do some editing. My USB mouse if hurting my hand somehow and I want to got back to the Magic Mouse asap. Please - for sure there is a simple solution !
Thanks !!

How to solve this problem 'Uncaught exception: dssma: invalid state(5): 25 in blackberry curve 8520?

HELLO, I have blackberry curve 8520. i have got error in my phone. the error is "Uncaught exception: DSSMA: invalid state(5): 25. I am unable to open my Inbox messages and unable to view phone's call history. the phone shows the same message again and again 'Uncaught exceptionSSMA: invalid state(5): 25'. Please help me how to solve it? I am unable to read sms in my phone. Please help me.
Solved!
Go to Solution.

Hi and Welcome to the Community!!
There's pretty much no diagnosing those -- they are the equivalent of the random errors in Windows for which tracing the root cause is fruitless. Basically, these are the last out in the programming code -- some event occurred for which there is no handler in the code. The fix is a code update that handles the event...but, again, knowing what the event is is pretty much impossible. So, there are a few things to try:
Sometimes, the code simply becomes corrupt and needs to be refreshed -- just like a reboot:
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
If it won't boot up cleanly, then you may need to try Safe Mode:
KB17877 How to start a BlackBerry smartphone in safe mode
There might be an updated code set from the carrier -- check them via this portal:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
The toughest possible cause is a badly behaving app. To find it, there are a couple of options. One is to see if you can read the log file:
Go to the home screen. Hold down the "alt" key and type 'lglg'. (You will not see anything while you type).This will bring up the log file. Scroll down (probably many pages) untill you see a line that says 'uncaught execption'. Click on this line. The name of the app will be in the info. Alternative methods for bringing up the logs are in this KB:
KB05349How to enable, access, and extract the event logs on a BlackBerry smartphone
The other method is to remove apps one at a time, waiting a while in between (I usually recommend a week), until the problem ceases...thereby discovering the offending app. Still another method is to reload the BB OS cleanly, leaving some time between adding other apps onto the BB so as to be able to determine exactly which one is the cause.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to solve the error "The specified resource is reserved" when running with DAQmx And LabVIEW?

How to solve the error "The specified resource is reserved" when running with DAQmx And LabVIEW?

I hate "J term"
OK I love the learning the students get. And, I like helping them out! But, as a former man who's got the varicose viens to prove he's spent time "behind the podium" (yeah, "behind the podium" puts 'em to sleep- songs and dances for the young'uns) come on! USE the tools you teach!
Instructors invited to engage in the forums
Jeff

Hi im new apple user ..Bought a mac 3 weeks before my mac does not show serial number on screen .Also I am unable to sign in imessage n facetime it gives network error like .! What can be this issue n how to solve it??

hi im new apple ,ac book pro user ..Bought a mac 3 weeks before my mac does not show serial number on screen .Also I am unable to sign in imessage n facetime it gives network error like though i can access web site n etc .! What can be this issue n how to solve it??

Hi,
If the machine is brand new I don't see why the serial Number is missing (it is entered on to a special chip at the factory)
However if the machine is a return and has been refurbished then the Logic/mother board may have been changed and someone forgot to put the info back to the new board.
for the Points
7:44 pm Thursday; January 16, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How to solve the exception with socket and PrintWriter constructor

I am working on a socket communication program and everything works fine on my computer until my boss moved my code to his computer. The following is the client code.
The client program terminate with exception "Couldn't get I/O for the connection to local host." I have no idea how to solve the problem because there is no way out if the two statements (socket constructor and PrintWriter) fail.
/*the program shall close connections and exit if the user clicks 'e'.*/
public class LocalClient extends JPanel implements KeyListener {
Socket localSocket = null;
PrintWriter out = null;
BufferedReader in = null;
char fromServer = ' ';
public LocalClient() {
try {
localSocket = new Socket("a029243.cs.uregina.ca", 4444);
out = new PrintWriter(localSocket.getOutputStream(), true);
} catch (UnknownHostException e) {
System.err.println("Don't know about local host.");
System.exit(1);
} catch (IOException e) {
System.err.println("Couldn't get I/O for the connection to
local host.");
System.exit(1);
addKeyListener(this);
}//end of constructor
/*the component needs to be focused in order to respond to user input */
public boolean isFocusTraversable() {return true;}
public void keyPressed(KeyEvent evt) {
public void keyReleased (KeyEvent evt) {
public void keyTyped(KeyEvent evt) {
System.out.println("key typed is called ");
char fromClient=evt.getKeyChar();
if (fromClient!= ' ') {
if (fromClient=='e')
try {
out.close();
localSocket.close();
System.exit(1);
} catch (IOException e)
{System.out.println("connection closed");}
else {
System.out.println("Client: " +
fromClient);
out.println(fromClient);
out.flush();}
public static void main(String[] args) throws IOException {
JFrame frame1=new JFrame();
Container contentPane=frame1.getContentPane();
LocalClient lc = new LocalClient();
contentPane.add(lc);
frame1.pack();
frame1.setSize(50,50);
frame1.setVisible(true);
}//end of main
} //end of class

Add e.printStackTrace() or System.out.println(e) to the catch block of the IOException. The IOException has a message about what went wrong.

When using nant i was told "excepted point(.) and coma(;)".how to solve this error

hi
i am using nant and for my code
            var symmetricKey = new RijndaelManaged() { Mode = CipherMode.CBC, Padding = PaddingMode.Zeros };
it is ok when i compile it by visual studio,but when i use nant i was told"excepted point(.) and coma(;)".
how to solve this error?
any help would be appreciated
best regards
martin

anyway now i realized that since i used .Net Frame work 2.0, and i should use like this
RijndaelManaged symmetricKey = newRijndaelManaged();
            symmetricKey.Mode = CipherMode.CBC;
            symmetricKey.Padding = PaddingMode.Zeros; and i cannot use "var" i've solved this problem and it could be helpful if some one who have the same problem

How to solve? RangeError: Error #1506: The specified range is invalid.

I complie a c library with alchemy, there are some errors in a function, and the flash traces:
"RangeError: Error #1506: The specified range is invalid."
I have set the CLibInit as global, only call the init() function ONCE as other said, but it didn't work.
I think that maybe the reason is out of heap/stack memory in some c functions???
or..??
Help me !!!
How to solve it...!!!
Thank you

This error is result of accessing an invalid memory pointer. You have likely corrupted alchemy, or are accessing an uninitialized or null pointer.
I'm not sure if this also happens in the case of a link problem. The linker does not complain if methods are missing. But, I thought that was a different error.

When i try to sync my phone, it says i should get ios5.1 but will lose my data except basic settings. How do i back it all up before getting new software if it wont let me sync? I am worried about the photos.

I have been trying to sync my phone, but it says i need to get the new software ios 5.1, but in doing this I will lose some things purchased on my phone which arent on itunes, and I should transfer them It also says something about apps and that i will only be able to store basic settings like contacts and texts. How can i back my phone up before installing this software update, and what do i do about my photos?
Thanks

Read the User's Guide... it covers how to backup and sync the device as designed.

Why I can not view the iPad 2 featured? Before can view it. Now I log to app store featured, it come out currently not available in Malaysian Store. How to solve this problem. Categories no problem. Can view it and purchase.

How to solve it ;(

There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

How to solve extra commas in CSV files in FCC..!!

Hi,
I have the CSV file with comma(,) separator which has around 50 fields. Among them there were some description fields which has comma (ex: karan,kumar) which has to come as a single field and comes as 51 fields instead of 50.
Due to this, im facing problem at File content conversion and it is failing with error " ERROR converting document line no. 8534 according to structure 'Header':java.lang.Exception: ERROR in configuration / structure 'Header.': More elements in file csv structure than field names specified!
We have around 10 fields which comes in this way.Any idea how to solve this issue?
Thanks
Deepthi.

Hello Deepthi,
The option here is use fieldFixedLengths instead of fieldSeparator. By this way evethough you have more fields in file than given filednames, it will not trigger any error. (But this one will still keep the commas which you might not need in the xml structure, though you can replace these in mapping anyway this is one solution )
enclosureSign option you can try, but you need do include the delimeter in you file structure, which is again a troublesum.
eg:- field1, | karan,kumar|,fieldn
In case you are familier with Adapter Module you can do it easily, but its a final option as far i am concern.
Regards,
Prasanna

How to solve 'java/lang/OutOfMemoryError' when apply weblogic patch 10.3.6.0.10?

Hi All: Our platform is IBM AIX power system 64 bit, os level 6. Oracle Fusion Middleware version is 10.3.6.0.8. We tried to patch 10.3.6.0.10 on it, but encounter ‘out of memory error’ when applied WebLogic patch 10.3.6.0.10 on UAT report server. Currently UAT has 3GB memory (currently is 3G) .
JVMDUMP006I Processing dump event "systhrow",
detail "java/lang/OutOfMemoryError
JVMDUMP032I JVM requested Heap dump using
'/ora_bin01/u01/oracle/Middleware/utilhd' in response to an event
JVMDUMP010I Heap dump written to
/ora_bin01/u01/oracle/Middleware/utils/bsu/heapdump.20150224.152727.6422620.0001.phd
JVMDUMP032I JVM requested Java dump using
'/ora_bin01/u01/oracle/Middleware/utils/bsu/javacore.20150224.152727.6422620.0002.txt'
in response to an event
JVMDUMP010I Java dump written to
/ora_bin01/u01/oracle/Middleware/utils/bsu/javacore.20150224.152727.6422620.0002.txt
JVMDUMP032I JVM requested Snap dump using
'/ora_bin01/u01/oracle/Middleware/utils/bsu/Snap.20150224.152727.6422620.0003.trc'
in response to an event
JVMDUMP006I Processing dump event "systhrow",
detail "java/lang/OutOfMemoryError" - please wait.
JVMDUMP010I Snap dump written to
/ora_bin01/u01/oracle/Middleware/utils/bsu/Snap.20150224.152727.6422620.0003.trc
JVMDUMP013I Processed dump event "systhrow",
detail "java/lang/OutOfMemoryError".
JVMDUMP032I JVM requested Heap dump using
'/ora_bin01/u01/oracle/Middleware/utils/bsu/heapdump.20150224.152735.6422620.0004.phd'
in response to an event
JVMDUMP010I Heap dump written to
/ora_bin01/u01/oracle/Middleware/utils/bsu/heapdump.20150224.152735.6422620.0004.phd
JVMDUMP032I JVM requested Java dump using
'/ora_bin01/u01/oracle/Middleware/utils/bsu/javacore.20150224.152735.6422620.0005.txt'
in response to an event
JVMDUMP010I Java dump written to
/ora_bin01/u01/oracle/Middleware/utils/bsu/javacore.20150224.152735.6422620.0005.txt
JVMDUMP032I JVM requested Snap dump using
'/ora_bin01/u01/oracle/Middleware/utils/bsu/Snap.20150224.152735.6422620.0006.trc'
in response to an event
Exception in thread "main"
java.lang.OutOfMemoryError at
java.lang.StringBuffer.ensureCapacityImpl(StringBuffer.java:335)
at
java.lang.StringBuffer.append(StringBuffer.java:201)
at
java.lang.Class.throwNoSuchMethodException(Class.java:278)
at
java.lang.Class.getMethod(Class.java:845)
at
com.bea.cie.common.dao.xbean.XBeanDataHandler.isValueSet(XBeanDataHandler.java:958)
at
com.bea.cie.common.dao.xbean.XBeanDataHandler.getValueFromObject(XBeanDataHandler.java:589)
at
com.bea.cie.common.dao.xbean.XBeanDataHandler.getSimpleValue(XBeanDataHandler.java:431)
at
com.bea.plateng.patch.dao.cat.PatchDependency.getRule(PatchDependency.java:48)
at
com.bea.plateng.patch.dao.cat.PatchCatalogHelper.getInvalidatedPatchMap(PatchCatalogHelper.java:1625)
at com.bea.plateng.patch.PatchSystem.updatePatchCatalog(PatchSystem.java:436)
at
com.bea.plateng.patch.PatchSystem.refresh(PatchSystem.java:130)
at
com.bea.plateng.patch.PatchSystem.setCacheDir(PatchSystem.java:201)
at
com.bea.plateng.patch.Patch.main(Patch.java:281)
JVMDUMP010I Snap dump written to
/ora_bin01/u01/oracle/Middleware/utils/bsu/Snap.20150224.152735.6422620.0006.trc
JVMDUMP013I Processed dump event "systhrow",
detail "java/lang/OutOfMemoryError".
Exception in thread "Attach API wait loop"
java.lang.OutOfMemoryError
at
com.ibm.tools.attach.javaSE.CommonDirectory.waitSemaphore(CommonDirectory.java:222)
at
com.ibm.tools.attach.javaSE.AttachHandler$WaitLoop.waitForNotification(AttachHandler.java:329)
at com.ibm.tools.attach.javaSE.AttachHandler$WaitLoop.run(AttachHandler.java:396)
bsu.sh -install -patch_download_dir=/ora_bin01/u01/oracle/Middleware/utils/bsu/cache_dir -patchlist=12UV -prod_dir=/ora_bin01/u01/oracle/Middleware/wlserver_10.3
we followed the README.txt instructions, and stop/start weblogic service before/after apply patch. Can anyone suggest a solution or Doc ID for helping us?
thank you very much!

Solutions: Bounce the applications and check the arguments if you can increase it. It is due to memory issue
You can set these values in CommEnv.sh (.cmd for windows) file located in the weblogic_home/common/bin directory.
This gets applied to all the domains under that wls home.
If you want to make the changes to specific domain then edit the SetDomainEnv.sh file located under the domain/bin directory.
How to solve java.lang.OutOfMemoryError: Java heap space
solutions: export JVM_ARGS="-Xms1024m -Xmx1024m"
How to solve java.lang.OutOfMemoryError: PermGen space
solution : export JVM_ARGS="-XX:PermSize=64M -XX:MaxPermSize=256m"

How to solve the issue "CUV check user equivalence failed" ?

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 VMs (rac1 and rac2) whose OS are Oracle Linux 5.6 in VMPlayer according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
In order to install Grid Infrastructure, we need to run Cluster Utility Verification (CUV) at first by running the cammand below:
[ora11g@rac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Its output:
Performing pre-checks for cluster services setup
Check: User equivalence for user “ora11g”
Node Comment
rac1 failed
rac2 failed
Result: PRVF-4007 : User equivalence check failed for user “ora11g”
ERROR:
User equivalence unavailable on all the specified nodes
Verification cannot proceed
Pre-check for cluster services setup was unsuccessful on all the nodes.
As you see above, check user equivalence failed. I have run the 4 commands to fix this error as below:
[ora11g@rac1 /]$ ssh-keygen
Its output:
Generating public/private rsa key pair.
Enter file in which to save the key (/home/grid/.ssh/id_rsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/grid/.ssh/id_rsa.
Your public key has been saved in /home/grid/.ssh/id_rsa.pub.
The key fingerprint is:
0c:10:6c:3b:ae:21:63:64:f8:0d:0e:d8:f0:41:32:ff [email protected]
[ora11g@rac1 .ssh]$ cat *pub >>authorized_keys
[ora11g@rac1 .ssh]$ ssh rac1
Its output:
The authenticity of host ‘rac1 (127.0.0.1)’ can’t be established.
RSA key fingerprint is 9d:ae:51:7c:72:81:07:37:31:92:f1:c8:90:bc:52:55.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added ‘rac1′ (RSA) to the list of known hosts.
Write failed: Broken pipe.
[ora11g@rac1 .ssh]$ ssh rac1-priv
Its output:
The authenticity of host ‘rac1-priv (192.168.137.35)’ can’t be established.
RSA key fingerprint is 9d:ae:51:7c:72:81:07:37:31:92:f1:c8:90:bc:52:55.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added ‘rac1-priv,192.168.137.35′ (RSA) to the list of known hosts.
Write failed: Broken pipe.
After run the 4 commands above, I run the command below again:
[ora11g@rac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Its output is the same:
PRVF-4007 : User equivalence check failed for user “ora11g”
ERROR:
User equivalence unavailable on all the specified nodes
Verification cannot proceed
I think the problem is "Broken pipe" and ssh cannot write authorized_keys to the machines.
My question is:
Do any folk understand how to solve the issue CUV "check user equivalence failed" for 2 VMs ?
Thanks.

Folks,
Hello. Thanks a lot for replying.
I have installed Grid Infrastructure a few times. Each time, on step 7 of 9, the installer fixes and checks 2 machines correctly. The entire installation has 3 parts as below:
1) Install Grid Infrastructure for a Cluster
2) Execute Root Scripts for Install Grid Infrastructure for a Cluster (script is root.sh)
3) Configure Oracle Grid Infrastructure for a Cluster that includes NCA, ASMCA, PICA and CVU.
Each time, on step 8 of 9, the Installer installs Grid Infrastructure for a Cluster successfully that includes "Prepare, Copy files, Link binaries, Setup files and Perform remote operations".
But when the Installer get to part 3 CVU, it fails and then the Database cannot be installed.
Deinstall Grid is a very complicated process to do. Because of this reason, we need to run CVU at first to make sure everything is correct for 2 machines before install Grid.
Even we ignore "user equivalence (ssh)", we don't know whether other items can be passed or not because CVU cannot proceed to check the machines.
My question is:
How to have the script "runcluvfy.sh" continue to check the machines while confronting "user equivalence failed" ?

Quickly!Quickly!Quickly!What is the error code mean? And how to solve it ?Please give your answer. Thanks

What is the error code mean? Why is there an error?And how to solve it ？Please give your answer. Thanks！
——1110340026
Attachments:
QQ图片20140403140655.jpg ‏108 KB

Sannieboyyyy wrote:
Could be me, but your VI is not working properly on the english version of LV. Can I suggest you to try programming in English in the future?
Yes, it's you. The VI is working just fine, except for some cosmetic issues with the labeling. I don't think is is a valid suggestion to force somebody to program in a specific language, especially since LabVIEW supports all these languages.
Here are the problems with the VI:
If you don't want an amplitude of zero, you need to set the amplitude control to a nonzero value before running. Simple as that!. (You could also set the input range for the amplitude control to exclude zero or use a case structure to skip certain code if the amplitude is zero).
You could also wire the error output to an indicator so it simply displays the errors, but keeps running.
Your while loop is currently useless. You can delete it and the program function will not change. Use a stop button at the loop condition.
Your while loop needs some timing so it runs at a reasonable rate. Either add a small wait or configure the signal generation to "simulate acquisition timing" instead of "run as fast as possible".
LabVIEW Champion . Do more with less code and in less time .

How to solve mutating table error?

I compiled the trigger below successfully:
CREATE OR REPLACE TRIGGER avail_products
BEFORE INSERT ON orders_tbl
FOR EACH ROW
DECLARE
m_prodqty products_tbl.prod_qty%TYPE;
m_ordered orders_tbl.ord_qty%TYPE;
m_prodid orders_tbl.prod_id%TYPE;
BEGIN
SELECT p.prod_qty, o.ord_qty, o.prod_id
INTO m_prodqty, m_ordered, m_prodid
FROM products_tbl p, orders_tbl o
WHERE ord_num=:NEW.ord_num;
IF m_prodqty>=m_ordered THEN
UPDATE products_tbl
SET prod_qty=prod_qty-m_ordered
WHERE prod_id=m_prodid;
ELSE
RAISE_APPLICATION_ERROR(-20101,'Product is not available');
END IF;
END;
However, when I run my PL/SQL block as follows:
DECLARE
v_max NUMBER;
BEGIN
SELECT MAX(ord_num)+1
INTO v_max
FROM orders_tbl;
INSERT INTO orders_tbl(ord_num, cust_id, prod_id, ord_qty, ord_date, dvy_date, refund)
VALUES (v_max, &cust_id, &prod_id, &ord_qty, '&ord_date', '&dvy_date',0);
COMMIT;
END;
UPDATE orders_tbl
SET refund=0.1*(SELECT price FROM products_tbl WHERE prod_id=(SELECT prod_id FROM orders_tbl WHERE ord_num=(SELECT MAX(ord_num) FROM orders_tbl)))
WHERE ord_num = (SELECT MAX(ord_num) FROM orders_tbl) AND dvy_date>ord_date+3;
COMMIT;
It gives me these errors:
ERROR at line 1:
ORA-01403: no data found
ORA-01403: no data found
ORA-06512: at "SYSTEM.AVAIL_PRODUCTS", line 9
ORA-04088: error during execution of trigger 'SYSTEM.AVAIL_PRODUCTS'
ORA-06512: at line 10
I try to debug it again and again but still can't find the mistake. So I change the trigger option to AFTER INSERT, then I got the error message that the table is mutating and trigger migh not see it. Anyone know how to solve this problem?
ERROR at line 2:
ORA-04091: table SYSTEM.ORDERS_TBL is mutating, trigger/function may not see it
ORA-06512: at "SYSTEM.AVAIL_PRODUCTS", line 13
ORA-04088: error during execution of trigger 'SYSTEM.AVAIL_PRODUCTS'
null

This extract from an earlier post might be of help:
You can solve this problem by using following thing
1)create a view on same table with all fields
and write trigger on table (insert,update or delete ) while inserting or updating or deleting row from table read from view.
(Mutating error come when you are reading from one table and want to update,insert or delete row of same table).
2)create a temporary table(but it is possible in 8i onword only) same as table on which you want to write trigger,while updating,inserting or deleting rows of table read from temporary table and after your work is over temporary table auotomatically drop (see proper command in oracle documentation to create temporary table).
null

How to solve Excepted declaration Specifier or '...' before CFXMLTreeRef

Similar Messages

Maybe you are looking for