How to solve problem After patch 10.2.0.4 applying on owb 10.2.0.1
HI OWB Gurus,
We have recently a patchapplied for oracle 10g .
prev version was oracle 10 g r2 10.2.0.1
new version is 10.2.0.4 ( patchset 4)
After patch applied at database and owb level there are some problem we are facing like
ETL process is very slow , cpu is going to 100% after start any mapping.
and audit browser are not opening.
Can any one help me on this so that we can resolve the problem.
- Umesh
Hi Umesh,
This might help you in diagnosing the client's performance
Accurate optimizer statistics are generally very important. They are gathered automatically at OWB install time and the Design Center -> Tools -> Optimize Repository menu selection is available to refresh them on an as needed basis.
The DBA can always help by pre-expanding tablespaces, making sure multiple tablespaces are available on separate disks or disk arrays so that I/O to indexes, metadata tables, snapshot tables, DB undo and redo logs, etc., can be evenly distributed.
With more complex metadata in this OWB release, you can expect many JDBC round-trips to the DB. Network latency can have a big impact on performance. To see how much time the owbclient uses for JDBC roundtrips to the DB, add the following line to Preference.properties in <owb home>/owb/bin/admin on your client machine:ClientProfile=true
Run OWB, then check ClientProfile.log in the admin directory. Keep in mind that a ping to localhost is probably about 0.025 ms, to another machine in the LAN about 0.25 ms. If the roundtrips are greater than 40 ms, then the issue is likely related network latency.
The two basic workarounds for network latency are:
-Remote control an OWB client machine that is physically close to the server.
-Do design-time work on a local repository, then MDL export the work for import to a central repository.
If the client and server are not on the same (high bandwidth) LAN, then total available bandwidth may become a factor. Same thing if the DB server is heavily loaded with respect to CPU or I/O, or if all your OWB design-time metadata is located on the same tablespace on the same hard drive. Distributing projects across multiple repositories which use their own
tablespaces spread across multiple hard drives would be very desirable.
The object editors are more functional and complex, as such, the required processing power to render them is greater (processor > 2GHz) Also note the OWB client software is mostly single-threaded, so it won't take advantage of multiple processors on one machine.
Long running sessions or large bulk operations (MDL import, validation, generation, deployment over large or multiple modules) can push up against the JVM memory limit. If performance begins to suffer due to memory, either:
a)exit and restart the OWB session;
b) if adequate physical memory exists, increase the -Xmx and -Dlimit values in the owbclient and OMBPlus startup scripts to better accommodate large operations.
ie.
If you have 2 GB or more, backup and edit owb\bin\win32\owbclient.bat file and modify line starting with %JAVAPATH
ie.
%JAVAPATH%\jre\bin\java -Xms128M -Xmx1024M -Dlimit=1024M -XX:MaxPermSize=1024M
This will add more memory to JVM for OWB client. Do the same for owb.cl file
Hope this will add some value.
Best Regards,
Prasad Bolla.
Similar Messages
-
after update iPhone4 to iOS6, its stuck, showing only USB to iTunes on the screen. What to do, how to solve problem, help
Connect your phone to iTunes on your computer like the diagram has indicated and restore the phone
-
How to solve problem - " Safari cannot open page because it isn't connected to the internet" but the airport is ok. signal full and i have n IP address. and i m using Macbook pro.
OS snow leopard and above...Do you have this problem with all websites, or only some? If only some, which ones?
-
How to solve problem :- rep-188-Report Server acccepts only Batch jobs
How to solve problem :- rep-188-Report Server acccepts only Batch jobs
Report server :- 10gR1Hello,
Could you give us some details about the command line ?
What is the value of DESTYPE ?
Regards -
Use CS4.
Switched computer with Win OS to iMac computer with OS X.
Downloaded CS4 on iMac.
But old product key entered is not recognised.
How to solve problem?There is nothing to resolve. Serial numbers are platform specific, but platform swaps only apply to current versions, meaning CS&. Your CS4 is not eligible for an upgrade, so your only option is to buy a new CS6 license or sign up for Creative Cloud.
Mylenium -
HT204266 how to solve problem 'your apple id has been disable'?
how to solve problem 'your apple id has been disable'?
Depending on why it's been disabled, you might be able to re-enable it via this page : http://appleid.apple.com
Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page -
Hi, After I applied the 5 patch to oracle 9201 on Win XP the export utility has started to complain about
EXP-00008: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00024: Export views not installed, please notify your DBA
EXP-00000: Export terminated unsuccessfully
And after I applied catexp.sql script, it didn't fix the issue with export, the error message has become like this:
EXP-00056: ORACLE error 31600 encountered
ORA-31600: invalid input value EMIT_SCHEMA for parameter NAME in function SET_TRANSFORM_PARAM
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.DBMS_METADATA_INT", line 3926
ORA-06512: at "SYS.DBMS_METADATA_INT", line 4050
ORA-06512: at "SYS.DBMS_METADATA", line 836
ORA-06512: at line 1
EXP-00000: Export terminated unsuccessfully
Can someone advise, what's wrong with it? With oracle 9.2.0.1 export worked fine, after upgrade to 9.2.0.5 it fails every time it gets to the table data export stage.
Thanks in adviseIt seems that you have found an answer in other forum :
Imp/Exp problems after patching oracle to 9205
Nicolas. -
I cannot save or export from Pages since installing Yosemite on MacBook Pro . I just get the message at beginning of this post “Acceptance Letter.pages” doesn’t exist or whatever file title I have inserted How to solve problem?
Thanks Peter but I was not seeking to store with I-Cloud. In fact I never store documents with I-cloud.
I was in fact trying to store the files to Documents, which is where I usually keep such things.
Have now discovered that if I leave the file untiled and simply close it, rather than saving it then it will save, oddly, to Documents. I then have to re-title it and move to the folder I want it in.
Despite the above, even once it is titled and saved in Documents then if I reopen it I still cannot then Export it to a Word or PDF file. I still just get the message . xxxxxx.pages does not exist!
Bad news as I am constantly exporting documents to Word and PDF to send to others who do not use a Mac -
Authorization problems after patch 6 upgrade and re-install
Hello everybody.
I had a perfect working Visual Composer installation.
After patching it, I got an 401 message, stating that I do not have authorization to view this page:
HTTP Error 401.1 - Unauthorized: Access is denied due to invalid credentials.
Uninstalling and reinstalling didn't bring me much further. It seems to be an Internet Explorer and/or IIS 6.0 related problem.
Of course I followed the very valuable note 804996, but the problem remains...
Can anyone help me out?
Thanx.Hi all.
I resolved my own problem.
Additional to the permission settings as they are explained in note 804996, you must add the Directory Security - Authentication & Access Control, set to Integrated Windows Authentication.
Otherwise Windows NTFS security will block you.
Gr.,
Marc. -
[SOLVED] Problem after upgrade last kde ( 4.9.3 )
I have a problem after the kde upgrade ( 4.9.3 )
With both dolphin that with konqueror if I use them to remotely access ( ftp )
icons appear as links from the first link ( attach a photo to make me understand better )
In the annex it can be noted that after the home are all represented by the icon link, in reality
only home and media are links
http://i49.tinypic.com/2wnodp3.png
This also applies to files not only for folders, any ideas / suggestions.
Moderator edit: The included image is too big. Reduced to url.
Last edited by pcxz (2012-11-23 10:14:43)arojas wrote:Open a bug report if you want the maintainer to notice this. You should mention that the patch also fixes a crash, that will increase the options that the package is fixed.
Added https://bugs.archlinux.org/task/32763
Thx. -
How to solve problem occur in display
how i solved this problem in my laptop
Per,
maybe this information could be helpful to solve my issue. I used your queries from On queue processing, or the lack thereof. Part #2 :
select
count(P.mskey) numEntries,t.taskid,t.taskname,A.Name ActionType,s.name StateName,
case when js.name = 'Running' then 'Running, processed:'||to_char(NVL(J.CurrentEntry,0)) else js.name end as Jstate
from
mxp_provision P
inner join mxp_Tasks T on T.taskid = P.actionid
inner join mxp_state S on S.StatID = P.state
inner join MXP_ActionType A on A.ActType=P.ActionType
left outer join mc_jobs J on J.JobGuid = T.JobGuid
left outer join mc_job_state JS on j.State = JS.State
group by
t.taskid,T.taskname, A.name, S.name,case when js.name = 'Running' then 'Running, processed:'||to_char(NVL(J.CurrentEntry,0)) else js.name end
order by
A.name, S.name
and got result - I have big Queue for Modify task:
What I have to do with such Queue? How to reset it?
Best regards,
Natalia. -
Hello ,
I have patch SM system fromSP16 to SP17.
After patching i am not able to see any My customizing worklist project in TC-SPRO
and also i am not able to see system in Maintenance Optimizer Transaction .
Please let me know is anything else to do after patching?
Regards,
SwaroopGo through these links..
spau
SPDD and SPAU after patch implementation -
Problems after patch abap/java sp04 to sp07 and cimmodel/cr data on PI7.1
hello friends,
after patch abap/java stack aan update cim model and cr content 3.00 to 4.xx, i have the following error by url:
http://<hostname:50000>/dir
error:
Internal Error
Internal error; contact your system administrator
Internal error: Unable to start component DIRECTORY_SERVER. Specified StartupCodeEntry class "com.sap.aii.ibdir.server.applcomp.StartupCodeEntry" does not exist
i have manually added the parameter in exchangeprofle, but what is the right value? is this the right way?
Thanks,
christophGuys,
Any success????
I am working on PI 7.1. I m also facing same issue..... when I tried to upgrade SAP-XICONS and SAP_XIPCK component from SP 4.0 to 7.0.
In my case the SLD, RWB and NWA is working... but I am not able to access
http://pidev:50000/dir/start/index.jsp.
The error says:
Internal error: Unable to start component DIRECTORY_SERVER. Specified StartupCodeEntry class "com.sap.aii.ibdir.server.applcomp.StartupCodeEntry" does not exist
deatiled error ************************
Stacktrace
Thrown:
com.sap.aii.ib.core.applcomp.StartupException: Internal error: Unable to start component DIRECTORY_SERVER. Specified StartupCodeEntry class "com.sap.aii.ibdir.server.applcomp.StartupCodeEntry" does not exist
at com.sap.aii.ib.core.applcomp.StartupException.newEntryClassNotFound(StartupException.java:78)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:101)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:438)
at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:203)
at JEE_jsp_start_index_6931850_1232360340765_1232372432437._jspService(JEE_jsp_start_index_6931850_1232360340765_1232372432437.java:122)
at com.sap.engine.services.servlets_jsp.lib.jspruntime.JspBase.service(JspBase.java:102)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:433)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:240)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:295)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
Initial Startup Exception
Internal error: Unable to start component DIRECTORY_SERVER. Specified StartupCodeEntry class "com.sap.aii.ibdir.server.applcomp.StartupCodeEntry" does not exist
Thrown:
com.sap.aii.ib.core.applcomp.StartupException: Internal error: Unable to start component DIRECTORY_SERVER. Specified StartupCodeEntry class "com.sap.aii.ibdir.server.applcomp.StartupCodeEntry" does not exist
at com.sap.aii.ib.core.applcomp.StartupException.newEntryClassNotFound(StartupException.java:78)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:101)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:438)
at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:203)
at com.sap.aii.ibdir.server.cache.monitoring.CacheMonitorServlet.startup(CacheMonitorServlet.java:104)
at com.sap.aii.ibdir.server.cache.monitoring.CacheMonitorServlet.init(CacheMonitorServlet.java:45)
at javax.servlet.GenericServlet.init(GenericServlet.java:241)
at com.sap.engine.services.servlets_jsp.server.security.PrivilegedActionImpl.run(PrivilegedActionImpl.java:97)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAs(Subject.java:396)
at com.sap.engine.services.servlets_jsp.server.application.WebComponents.addServlet(WebComponents.java:341)
at com.sap.engine.services.servlets_jsp.server.deploy.ApplicationThreadInitializer.loadServlets(ApplicationThreadInitializer.java:849)
at com.sap.engine.services.servlets_jsp.server.deploy.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:219)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
Regards,
Siddhesh S.Tawate -
Problems after patch 120230-08
I have installed that patch and i encountred a lot of problems. I'll start with the most important SSL imap, pop3 doesn't work. After upgrade i noticed that my ssl certification is out of date so i tried to recreate it
/opt/sun/messaging/sbin/certutil -N -d /opt/sun/messaging/config -f /opt/sun/messaging/config/sslpassword.conf
/opt/sun/messaging/sbin/certutil -S -n SampleRootCA -x -t "CTu,CTu,CTu" -s "CN=Sample Root CA, O=Sample.pl" -m 25000 -o /opt/sun/messaging/config/SampleRootCa.crt -d /opt/sun/messaging/config -f /opt/sun/messaging/config/sslpassword.conf -z /etc/passwd
/opt/sun/messaging/sbin/certutil -S -n Server-Cert -c SampleRootCA -t "u,u,u" -s "CN=sun.workgroup.Sample.pl, o=Sample.pl" -m 25001 -o /opt/sun/messaging/config/SampleSSLServer.crt -d /opt/sun/messaging/config -f /opt/sun/messaging/config/sslpassword.conf -z /etc/passwd
/opt/sun/messaging/sbin/certutil -V -u V -n SampleRootCA -d /opt/sun/messaging/config
/opt/sun/messaging/sbin/certutil -V -u V -n Server-Cert -d /opt/sun/messaging/config
/opt/sun/messaging/sbin/certutil -L -d /opt/sun/messaging/config/
/opt/sun/messaging/sbin/certutil -L -n Server-Cert -d /opt/sun/messaging/config/
/opt/sun/messaging/sbin/modutil -list -dbdir /opt/sun/messaging/config/
chown mailsrv:mail /opt/sun/messaging/config/key3.db
chown mailsrv:mail /opt/sun/messaging/config/cert8.db
Did all that steps (where Sample = my company name) and every result from that command was as before. Checked configutil:
service.imap.allowanonymouslogin = no
service.imap.banner = "%h %p service (%P %V)"
service.imap.enable = 1
service.imap.enablesslport = yes
service.imap.idletimeout = 30
service.imap.maxsessions = 4000
service.imap.maxthreads = 250
service.imap.numprocesses = 1
service.imap.plaintextmincipher = 0
service.imap.port = 143
service.imap.sslcachesize = 0
service.imap.sslport = 993
service.imap.sslusessl = yes
Everything seems fine. I checked my old old configutil entries and turned out almost all 'encryption' entries aren't there. So i added those
encryption.nscertfile = config/cert8.db
encryption.nskeyfile = config/key3.db
encryption.nsssl3 = on
encryption.nsssl3ciphers = "rsa_rc4_40_md5,rsa_rc2_40_md5,rsa_des_sha,rsa_rc4_128_md5,rsa_3des_sha"
encryption.rsa.nssslpersonalityssl = Server-Cert
But everytime i added them i had:
/opt/sun/messaging/lib/configutil -o encryption.nsssl3ciphers -v rsa_rc4_40_md5,rsa_rc2_40_md5,rsa_des_sha,rsa_rc4_128_md5,rsa_3des_sha
OK SET
WARNING: unrecognized option encryption.nsssl3ciphers has been set
So i wonder what's up, what changed between versions. It was supposed to be quick fix but it wasnt :/
My version:
Sun Java(tm) System Messaging Server 6.3-0.08 (built Jun 8 2006)
libimta.so 6.3-0.08 (built 08:28:13, Jun 8 2006)
Linux workgroup.sample.pl 2.6.12-1.1381_FC3smp #1 SMP Fri Oct 21 04:03:26 EDT 2005 i686 i686 i386 GNU/Linux
Any help will be appreciated :/I've solved the problem myself. Turns out there were few sslpassword files.
sslpassword file had just: mypassword
while
sslpassword.conf had Internal (Software) Token:mypassword
seems the LEGIT one is just plain password in sslpassword file. Then it all works fine. Hopefully this will save some time to some ppl.
Cheers -
[Solved] Problems after upgrading graphics card
I just upgraded my 8800GTX to a GTX650. I ran "nvidia-xconfig" initially then "nvidia-settings" to make sure both of my monitors looked good. After rebooting I have Openbox running on only my "main" screen. I can move my mouse to the second screen, but when I do the cursor changes to the default X one and I can't do anything there. I also can't drag windows to my secondary screen.
I figure it is something to do with twinview not working properly, or some other xorg.conf configuration problem. Here is a link to my xorg.conf: http://pastie.org/private/zo9fikanxumf4haqaya2eg
Any help would be great.
EDIT: Solved. In nvidia-settings I needed to set both displays to the same X screen
Last edited by Dethredic (2013-09-04 23:21:10)Quote from: blazing storm on 04-August-05, 17:54:18
In your motherboard manual it describes how to re-set the CMOS. Taking out the battery would work but it's easier to re-set the CMOS via the jumper pins. It also holds info on bios features and settings in the manual so you might want to scan through that and see if there's anything you might change.
Have you tried the graphics card in another computer? Do you get the same problems?
Ok - I now found out which jumpers to change - thank you.
I have tried putting my old graphics card back in but still had the problem.
On Sunday someone is going to switch ram chips (his are good in his machine) with me and hopefully we'll establish whether or not my physical ram modules are ok.
Seem very strange to me that both of my modules (one was ok a month ago and the other just arrived from Crucial) fail the same test - memtest #7 - random memory but then I'm only an egg when it comes to this stuff.
Many thanks for everyone's help !
Mike
Well I don't know if it's good news or bad news !?
Have just tested my system with a known to be good ram module and ?
My machine failed Memtest #7 - the machine that the 'borrowed' ram came from passes the test.
So I will reset the bios I guess.
Mike
Maybe you are looking for
-
How to find out the oracle level user(sid) who is updating the table?
Hi everyone, I am creating a update trigger which is to look for the user (sid) who is updating the rows in this table. Is there any lower level dynamic view or table I can use to find out the user? Thanks for any help. Jun
-
How do I get the area above the open window to display information (as in closing that specific window, "Safari File Edit View History, etc.) without having to attempt to put the cursor on it to give me that info? I am not referring to the dock whic
-
On/off Button and brightness buttons don't work in the Apple Cinema Display
I write you because I bought a new apple cinema display 20" a month ago and I have problems with the on and off button and the brightness buttons. Thew work sometimes. I think that te problem is windows XP but I am not sure. My graphics card is a ATI
-
What is the policy for dead pixel or stuck pixel in apple store?
Hi, i'm the new mac user here. I never use the MAC. I just bought it 2 day ago at apple store. I'm so happy when i carry it back to my home. When I turn on my macbook, I think to get 1 DOT bad pixel on my screen......Oh..Is it my fault??? I just boug
-
DVD player artifact issue on certain player only
Can anyone tell me please why this is happening!! I'm nearly finished with a documentary project. It's 64 minutes long. I used the DVD 90 minute Best settings with Dolby audio in Compressor and DVDSP build and burn. It works fine in the simulator in